in your garage to make future searches easy.

Condition Value
expand_moreAir intake system
expand_moreIntake manifold
M6 7.38 lbf⋅ft
M7 11.06 lbf⋅ft
M8 16.23 lbf⋅ft
expand_moreCylinder head
expand_moreCamshaft bearing
Inlet camshaft 6.64 lbf⋅ft
Replace aluminum screws.
expand_moreOutlet camshaft
First stage 5.9 lbf⋅ft
Replace aluminum screws.
Second stage 60°
Install bearing using special tool.
expand_moreInlet camshaft of N52 engine
M6 × 30 screws 6.64 lbf⋅ft
Replace aluminum screws.
expand_moreOutlet camshaft N52 engine screws M7 × 70
First stage 5.9 lbf⋅ft
Replace aluminum screws.
Second stage 60°
Install bearing using special tool.
expand_moreInlet camshaft M7 × 70 screws of N53 engine
First stage 5.9 lbf⋅ft
Insert the screws dry.
Second stage 60°
Install bearing using special tool.
expand_moreOutlet camshaft M7 × 70 screws of N53 engine
First stage 5.9 lbf⋅ft
Insert the screws dry.
Second stage 60°
Install bearing using special tool.
expand_moreAll BMW gasoline V8 4.8 L N62 B48 B engines
M6 7.38 lbf⋅ft
M7 11.06 lbf⋅ft
M8 14.75 lbf⋅ft
expand_moreCylinder head screws
expand_moreScrews 1 – 14
Figure 1. Cylinder head, Cylinder head screws, BMW diesel straight-6 3.0 L M57 D30 (306D5), Screws 1 – 14.
Figure 1. Cylinder head, Cylinder head screws, BMW diesel straight-6 3.0 L M57 D30 (306D5), Screws 1 – 14.
First stage 59 lbf⋅ft
Replace screws. See figure 1.
Second stage 180° detach
Loosen the cylinder head screws in the reverse order of tightening.
Third stage 36.88 lbf⋅ft
Fourth stage 120°
Fifth stage 120°
expand_moreScrew 15
Sixth stage 14.01 lbf⋅ft
expand_moreMagnesium valve cover
expand_moreScrews 1 – 14
Figure 2. Cylinder head, Cylinder head screws, BMW gasoline straight-6 3.0 L N52 B30 A, Magnesium valve cover, Screws 1 – 14.
Figure 2. Cylinder head, Cylinder head screws, BMW gasoline straight-6 3.0 L N52 B30 A, Magnesium valve cover, Screws 1 – 14.
First stage 22.13 lbf⋅ft
Replace screws. See figure 2.
Second stage 90°
Fourth stage 45°
expand_moreScrews 1 – 10
Third stage 90°
expand_moreScrews 15 – 18
Fifth stage 11.06 lbf⋅ft
Replace screws.
Sixth stage 90°
expand_morePlastic valve cover
expand_moreScrews 1 – 14
First stage 22.13 lbf⋅ft
Replace screws. See figure 2.
Second stage 90°
Fourth stage 45°
expand_moreScrews 1 – 10
Third stage 90°
expand_moreScrews 15 – 18
Fifth stage 7.38 lbf⋅ft
Replace screws.
expand_moreScrews 15 – 17
Sixth stage 90°
expand_moreScrew 18
Seventh stage 135°
expand_moreAll BMW gasoline V8 4.8 L N62 B48 B engines
Figure 3. Cylinder head, Cylinder head screws, BMW gasoline V8 4.8 L N62 B48 B.
Figure 3. Cylinder head, Cylinder head screws, BMW gasoline V8 4.8 L N62 B48 B.
First stage 22.13 lbf⋅ft
Replace the screws, do not wash off the coating. See figure 3.
Second stage 90°
Third stage 90°
expand_moreValve cover
expand_moreM6
Screws 7.38 lbf⋅ft
expand_moreM7
Screws 11.06 lbf⋅ft
expand_moreMagnesium valve cover
First stage 5.16 lbf⋅ft
Replace screws.
Second stage 90°
Plastic valve cover 6.64 lbf⋅ft
expand_moreAll other modifications
M6 7.38 lbf⋅ft
M7 11.06 lbf⋅ft
expand_moreEngine block
expand_moreConnecting rod bearing
First stage 14.75 lbf⋅ft
Replace screws.
Second stage 70°
First stage 14.75 lbf⋅ft
Replace screw, wash and slightly oil.
Second stage 120°
expand_moreAll BMW gasoline V8 4.8 L N62 B48 B engines
First stage 3.69 lbf⋅ft
Replace, wash and lightly lubricate the screws.
Second stage 14.75 lbf⋅ft
Third stage 70°
expand_moreCrankshaft central screws
expand_moreAll BMW gasoline V8 4.8 L N62 B48 B engines
First stage 73.76 lbf⋅ft
Second stage 60°
Third stage 60°
Fourth stage 60°
expand_moreDrive plate
650 i with gasoline V8 4.8 L 362 HP engine (2005.7–2010.7) 77.44 lbf⋅ft
Replace screws.
expand_moreEngine block closure screws
expand_more635 d with diesel straight-6 3.0 L 282 HP at 4000 RPM, 560 N⋅m at 2000 RPM engine (2007.7–2010.7)
M30 × 1 screws 51.63 lbf⋅ft
M40 × 1,5 screws 22.13 lbf⋅ft
expand_moreFlywheel
All BMW gasoline V8 4.8 L N62 B48 B engines 88.51 lbf⋅ft
Lightly lubricate the screws thread.
expand_moreMain bearing
expand_moreM10 × 85 screws
First stage 18.44 lbf⋅ft
Replace screws.
Second stage 36.88 lbf⋅ft
Third stage 60°
Fourth stage 60°
Fifth stage 180° detach
from inside to outside
Sixth stage 18.44 lbf⋅ft
Seventh stage 36.88 lbf⋅ft
Eighth stage 60°
Ninth stage 60°
expand_moreM10 × 100 screws
First stage 14.75 lbf⋅ft
Replace screws.
Second stage 70°
expand_moreM10 × 27 screws
First stage 11.06 lbf⋅ft
Replace bolts.
Second stage 90°
expand_moreM10 × 41 screws
First stage 11.06 lbf⋅ft
Replace bolts.
Second stage 90°
expand_moreM8 × 37 screws
First stage 5.9 lbf⋅ft
Replace bolts.
Second stage 90°
expand_moreAll BMW gasoline V8 4.8 L N62 B48 B engines
expand_moreBearing cap 5
Second stage slacken
Align the crankshaft
Third stage 14.75 lbf⋅ft
expand_moreM11
First stage 14.75 lbf⋅ft
Replace the screws, do not wash off the coating.
Fourth stage 100°
expand_moreScrew with bearing bush
Fifth stage 4.43 lbf⋅ft
Use new screws.
expand_moreVibration damper
First stage 29.5 lbf⋅ft
Replace screws.
Second stage 120°
M8 × 16 screws (class 10.9) 25.81 lbf⋅ft
M8 × 20 screws (class 8.8) 18.44 lbf⋅ft
M8 × 16 screws (class 10.9) 25.81 lbf⋅ft
M8 × 20 screws (class 8.8) 18.44 lbf⋅ft
All BMW gasoline V8 4.8 L N62 B48 B engines 16.23 lbf⋅ft
expand_moreEngine control
expand_moreCamshaft adjuster
expand_more650 i with gasoline V8 4.8 L 362 HP engine (2005.7–2010.7)
M10 59 lbf⋅ft
Use new screw.
expand_moreCamshaft timing chain guide rail
expand_moreBearing screws
M7 10.33 lbf⋅ft
expand_moreM18
Cap 18.44 lbf⋅ft
M7 11.06 lbf⋅ft
M8 14.75 lbf⋅ft
expand_moreCamshaft timing chain slip rail
expand_more630 i with gasoline straight-6 3.0 L 255 HP engine (2004.9–2010.7)
expand_moreAt the cylinder head
M6 × 35 screws 5.9 lbf⋅ft
expand_moreCamshaft timing chain tensioner
expand_more630 i with gasoline straight-6 3.0 L 255 HP engine (2004.9–2010.7)
expand_moreN52 engine
Magnesium valve cover 36.88 lbf⋅ft
Replace sealing rings.
Plastic valve cover 40.57 lbf⋅ft
Replace sealing rings.
expand_moreCamshaft timing chain tensioning rail
expand_more630 i with gasoline straight-6 3.0 L 255 HP engine (2004.9–2010.7)
expand_moreBearing screws
M8 14.75 lbf⋅ft
expand_moreM22
Cap 36.88 lbf⋅ft
expand_moreCamshaft timing gear
expand_moreChain tensioner
M22 × 1,5 screws 40.57 lbf⋅ft
M22 × 1,5 screws 40.57 lbf⋅ft
All BMW gasoline V8 4.8 L N62 B48 B engines 47.94 lbf⋅ft
expand_moreInlet camshaft wheel
expand_moreM10
First stage 14.75 lbf⋅ft
Use new screw.
Second stage 180°
expand_moreN52 engine
First stage 14.75 lbf⋅ft
Use new screw.
Second stage 180°
expand_moreN53 engine
First stage 14.75 lbf⋅ft
Use new screw.
Second stage 180°
expand_moreOutlet camshaft wheel
expand_moreM10
First stage 14.75 lbf⋅ft
Use new screw.
Second stage 180°
expand_moreN52 engine
First stage 14.75 lbf⋅ft
Use new screw.
Second stage 180°
expand_moreN53 engine
First stage 14.75 lbf⋅ft
Use new screw.
Second stage 180°
expand_moreTiming case cover
expand_more635 d with diesel straight-6 3.0 L 282 HP at 4000 RPM, 560 N⋅m at 2000 RPM engine (2007.7–2010.7)
M10 34.67 lbf⋅ft
M6 7.38 lbf⋅ft
M7 11.06 lbf⋅ft
M8 16.23 lbf⋅ft
expand_moreEngine lubrication
expand_moreOil drain plug
expand_moreAll BMW gasoline V8 4.8 L N62 B48 B engines
M18 25.81 lbf⋅ft
expand_moreOil filter housing
expand_moreOil sump
expand_moreAll BMW gasoline V8 4.8 L N62 B48 B engines
expand_moreM6
Oil sump top part 7.38 lbf⋅ft
expand_moreM8
Oil sump lower part 17.7 lbf⋅ft
Oil sump top part 14.75 lbf⋅ft
expand_moreEngine management
expand_moreKnock sensor
All BMW gasoline straight-6 3.0 L N52 B30 A engines 14.75 lbf⋅ft
All BMW gasoline V8 4.8 L N62 B48 B engines 14.7516.23 lbf⋅ft
Lambda sensor 36.88 lbf⋅ft
expand_moreExhaust system
expand_moreExhaust manifold
M6 7.38 lbf⋅ft
Replace nuts.
M7 11.06 lbf⋅ft
Replace nuts.
M8 16.96 lbf⋅ft
Replace nuts.
expand_moreAll BMW gasoline V8 4.8 L N62 B48 B engines
M6 7.38 lbf⋅ft
Replace the nuts and use fitting paste
M7 11.06 lbf⋅ft
Replace the nuts and use fitting paste
M8 16.96 lbf⋅ft
Replace the nuts and use fitting paste
expand_moreIgnition system
expand_moreSpark plugs
All BMW gasoline straight-6 3.0 L N52 B30 A engines 16.96 lbf⋅ft
expand_moreAll BMW gasoline V8 4.8 L N62 B48 B engines
M12 14.7519.18 lbf⋅ft
M14 19.9124.34 lbf⋅ft

Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2009 BMW 6 Series Convertible user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.

Before doing any DIY service please check your insurance policy and BMW warranty policy for your region. In some regions DIY service may invalidate your warranty.

Conquer your fears and never give up!

DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow BMW 6 Series Convertible service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.

Doing basic service for your 2009 BMW 6 Series Convertible you're not only saving money, but also also improving your technical skills and learning something new.

BMW 6 Series Convertible First generation LCI model years

Units:
facebook twitter reddit linkedin messenger whatsapp telegram skype email chat