in your garage to make future searches easy.

Condition Value
expand_moreCamber front
expand_moreWith standard chassis
Setting -0°12'+0°25'-0°25'
Test value -0°12'+0°30'-0°30'
The maximum allowed difference between left and right is 0°30'
expand_moreSetting
With dint -1°03'+0°25'-0°25'
Otherwise -0°55'+0°25'-0°25'
Test value -0°55'+0°30'-0°30'
The maximum allowed difference between left and right is 0°30'
expand_moreWith dint
Test value -1°03'+0°30'-0°30'
The maximum allowed difference between left and right is 0°30'
expand_moreCamber rear
Setting -1°50'+0°05'-0°05'
Test value -1°50'+0°25'-0°25'
The maximum allowed difference between left and right is 0°30'
Setting -1°40'+0°05'-0°05'
Test value -1°40'+0°25'-0°25'
The maximum allowed difference between left and right is 0°30'
Conditions for axle measurement 2 x 68 Kg on front seats, 1 x 68 Kg
on rear seat, 1 x 21 Kg in boot,
with full fuel tank.
expand_moreFront axle unloaded weight position
With 19" rims 2.072.14 ft
With 20" rims 2.112.18 ft
With 19" rims 2.062.13 ft
expand_moreWith 20" rims
With dint 2.072.14 ft
Otherwise 2.112.17 ft
expand_moreFront tire pressure
BMW gasoline V8 4.4 L S63 B44 B 552 HP 2.2 bar
Additionally observe tire inflation pressure in the operating instructions or on the sticker for tire inflation pressure (on the vehicle)!
expand_moreRear axle unloaded weight position
With 19" rims 2.022.09 ft
With 20" rims 2.062.13 ft
With 19" rims 2.032.1 ft
expand_moreWith 20" rims
With dint 2.042.11 ft
Otherwise 2.072.14 ft
expand_moreRear tire pressure
BMW gasoline V8 4.4 L S63 B44 B 552 HP 2.3 bar
Additionally observe tire inflation pressure in the operating instructions or on the sticker for tire inflation pressure (on the vehicle)!
expand_moreToe-in front (total toe)
Setting 0°10'+0°04'-0°04'
Test value 0°10'+0°12'-0°12'
expand_moreToe-in rear
Setting 0°18'+0°12'-0°12'
Test value 0°18'+0°12'-0°12'
expand_moreTread front
expand_moreTread rear
Wheel steering angle inner wheel (relative steering angle) 20°00'+0°00'-0°00'
expand_moreWheel steering angle outer wheel (relative steering angle)
BMW diesel straight-6 3.0 L N57 D30 C 375 HP, 740 N⋅m at 2000 RPM 18°15'+0°30'-0°30'
The maximum allowed difference between left and right is 0°30'
BMW gasoline V8 4.4 L S63 B44 B 552 HP 17°18'+0°30'-0°30'
The maximum allowed difference between left and right is 0°30'

Chassis specifications will help to do body work on your 2012 BMW 5 Series M5 Sedan.

Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2012 BMW 5 Series M5 Sedan user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.

Before doing any DIY service please check your insurance policy and BMW warranty policy for your region. In some regions DIY service may invalidate your warranty.

Conquer your fears and never give up!

DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow BMW 5 Series M5 Sedan service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.

Doing basic service for your 2012 BMW 5 Series M5 Sedan you're not only saving money, but also also improving your technical skills and learning something new.

BMW 5 Series M5 Sedan Sixth generation model years

Units:
facebook twitter reddit linkedin messenger whatsapp telegram skype email chat