2002 BMW 3 Series Sedan front suspension fastener tightening specifications

in your garage to make future searches easy.

Condition	Value

expand_moreFront axle brake

expand_moreBleed valve


Code range 11 mm	8.85–11.8 lbf⋅ft8.85–11.8 lbf⋅ft12–16 N⋅m
Code range 7 mm	2.58–3.69 lbf⋅ft2.58–3.69 lbf⋅ft3.5–5 N⋅m
Code range 9 mm	5.16–8.11 lbf⋅ft5.16–8.11 lbf⋅ft7–11 N⋅m


Front axle brake caliper	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Clean the components and do not grease.
Front axle brake caliper mounting support	81.13 lbf⋅ft81.13 lbf⋅ft110 N⋅m
Front axle brake disc	11.8 lbf⋅ft11.8 lbf⋅ft16 N⋅m
Wheel speed sensor	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m

expand_moreFront axle steering


Steering gear	30.98 lbf⋅ft30.98 lbf⋅ft42 N⋅m
Track rod end on stub axle	47.94 lbf⋅ft47.94 lbf⋅ft65 N⋅m
Track rod end on track rod	33.19 lbf⋅ft33.19 lbf⋅ft45 N⋅m

expand_moreFront axle suspension


Shock-absorber piston rod	47.2 lbf⋅ft47.2 lbf⋅ft64 N⋅m

expand_moreSuspension strut


Lower mounting	59.74 lbf⋅ft59.74 lbf⋅ft81 N⋅m
Replace screws.
On chassis	25.08 lbf⋅ft25.08 lbf⋅ft34 N⋅m
Replace nuts.

expand_moreWheel suspension

expand_moreFront axle drive shaft


Central nuts	309.78 lbf⋅ft309.78 lbf⋅ft420 N⋅m
Replace nuts.


Stabiliser mounting at suspension strut	47.94 lbf⋅ft47.94 lbf⋅ft65 N⋅m

expand_moreFront axle suspension

Figure 1. Wheel suspension, Front axle suspension.


1	66.38 lbf⋅ft66.38 lbf⋅ft90 N⋅m
See figure 1.
2	47.94 lbf⋅ft47.94 lbf⋅ft65 N⋅m
Replace nut.
3	43.52 lbf⋅ft43.52 lbf⋅ft59 N⋅m
Replace screws.

expand_moreTransverse control arm

expand_moreAt the subframe


Front	66.38 lbf⋅ft66.38 lbf⋅ft90 N⋅m
Replace nuts.

expand_moreSupport at the subframe


Rear	43.52 lbf⋅ft43.52 lbf⋅ft59 N⋅m
Replace screws.


On stub axle	47.94 lbf⋅ft47.94 lbf⋅ft65 N⋅m
Replace nuts.

expand_moreWheel hub wheel bearing


Central nuts	213.89 lbf⋅ft213.89 lbf⋅ft290 N⋅m

expand_moreWheels and tires

expand_moreTire pressure sensors


Torx screws	2.95 lbf⋅ft2.95 lbf⋅ft4 N⋅m
Replace the screw.
Union nuts	2.95 lbf⋅ft2.95 lbf⋅ft4 N⋅m


Wheel attachment	81.13–95.88 lbf⋅ft81.13–95.88 lbf⋅ft110–130 N⋅m

Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2002 BMW 3 Series Sedan user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.

Before doing any DIY service please check your insurance policy and BMW warranty policy for your region. In some regions DIY service may invalidate your warranty.

Maintenance Items

Engine Fastener Tightening Specifications
Front Suspension Fastener Tightening Specifications
Rear Suspension Fastener Tightening Specifications
Transmission Fastener Tightening Specifications

Service Intervals

Conquer your fears and never give up!

DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow BMW 3 Series Sedan service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.

Doing basic service for your 2002 BMW 3 Series Sedan you're not only saving money, but also also improving your technical skills and learning something new.

2002 BMW 3 Series Sedan Fourth generation LCI Front Suspension Fastener Tightening Specifications

Table of Contents

Conquer your fears and never give up!

BMW 3 Series Sedan Fourth generation LCI model years

Suggest edit