expand_moreM3 3.2 with gasoline straight-6 3.2 L 338 HP engine (2001.4–2007.12)
M6
7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
M7
11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m
expand_moreEngine block
expand_moreConnecting rod bearing
expand_moreM3 3.2 with gasoline straight-6 3.2 L 338 HP engine (2001.4–2007.12)
First stage
3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Replace screws.
Second stage
22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Third stage
70°70°70°
expand_moreCrankshaft pulley
M3 3.2 with gasoline straight-6 3.2 L 338 HP engine (2001.4–2007.12)
16.23 lbf⋅ft16.23 lbf⋅ft22 N⋅m
expand_moreDrive plate
M3 3.2 with gasoline straight-6 3.2 L 338 HP engine (2001.4–2007.12)
88.51 lbf⋅ft88.51 lbf⋅ft120 N⋅m
Replace screws.
expand_moreFlywheel
M3 3.2 with gasoline straight-6 3.2 L 338 HP engine (2001.4–2007.12)
77.44 lbf⋅ft77.44 lbf⋅ft105 N⋅m
Replace screws.
expand_moreMain bearing
expand_moreM3 3.2 with gasoline straight-6 3.2 L 338 HP engine (2001.4–2007.12)
First stage
18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Replace screws, wash and slightly oil.
Second stage
50°50°50°
expand_moreEngine control
expand_moreTiming case cover
expand_moreM3 3.2 with gasoline straight-6 3.2 L 338 HP engine (2001.4–2007.12)
M7
11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m
M8
14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
expand_moreEngine lubrication
expand_moreOil drain plug
M3 3.2 with gasoline straight-6 3.2 L 338 HP engine (2001.4–2007.12)
18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
expand_moreEngine management
expand_moreLambda sensor
M3 3.2 with gasoline straight-6 3.2 L 338 HP engine (2001.4–2007.12)
36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
expand_moreExhaust system
expand_moreExhaust manifold
expand_moreM3 3.2 with gasoline straight-6 3.2 L 338 HP engine (2001.4–2007.12)
M6
7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Replace nuts.
M7
11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m
Replace nuts.
M8
16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m
Replace nuts.
expand_moreIgnition system
expand_moreSpark plugs
expand_moreM3 3.2 with gasoline straight-6 3.2 L 338 HP engine (2001.4–2007.12)
M12
14.75–19.18 lbf⋅ft14.75–19.18 lbf⋅ft20–26 N⋅m
M14
19.91–24.34 lbf⋅ft19.91–24.34 lbf⋅ft27–33 N⋅m
Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2001 BMW 3 Series M3 Convertible user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.
Before doing any DIY service please check your insurance policy and BMW warranty policy for your region. In some regions DIY service may invalidate your warranty.
DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow BMW 3 Series M3 Convertible service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.
Doing basic service for your 2001 BMW 3 Series M3 Convertible you're not only saving money, but also also improving your technical skills and learning something new.
BMW 3 Series M3 Convertible Fourth generation model years
