2017 BMW 2 Series M2 Convertible First generation Front Suspension Fastener Tightening Specifications
in your garage to make future searches easy.
| Condition | Value |
|---|
| Code range 11 mm | 7.38 lbf⋅ft |
| At the brake caliper | 17.7 lbf⋅ft |
| At the brake hose | 12.54 lbf⋅ft |
| Hexagon socket screws | 20.65 lbf⋅ft |
| M12 × 1,5 screws | 81.13 lbf⋅ft |
| Replace screws. | |
| Front axle brake disc | 11.8 lbf⋅ft |
| Replace screws. | |
| M8 | 17.7 lbf⋅ft |
| Clean thread, use new screws and do not retighten screws any further. | |
| At the subframe | 41.3 lbf⋅ft |
| Replace screws. | |
| Heat shields | 5.9 lbf⋅ft |
| M14 | 45.73 lbf⋅ft |
| M14 | 129.07 lbf⋅ft |
| Replace nuts. | |
| Track rod end on track rod | 23.6 lbf⋅ft |
| Track rod on steering gear | 77.44 lbf⋅ft |
| M12 | 47.2 lbf⋅ft |
| Replace nuts. | |
| First stage | 41.3 lbf⋅ft |
| Replace screws. | |
| Second stage | 90° |
| First stage | 20.65 lbf⋅ft |
| Replace screws. | |
| Second stage | 90° |
| First stage | 32.45 lbf⋅ft |
| Replace nuts. | |
| Second stage | 90° |
| First stage | 154.89 lbf⋅ft |
| Replace collar screw and pressure spring. | |
| Second stage | 90° |
| M8 | 20.65 lbf⋅ft |
| Replace nuts. | |
| M10 | 41.3 lbf⋅ft |
| Replace nuts. | |
| M10 | 41.3 lbf⋅ft |
| Replace nuts. | |
| M8 | 20.65 lbf⋅ft |
| Replace nuts. | |
| M14 | 129.07 lbf⋅ft |
| First stage | 41.3 lbf⋅ft |
| Use new screws. | |
| Second stage | 90° |
| First stage | 73.76 lbf⋅ft |
| Replace screws and nuts. | |
| Second stage | 90° |
| M14 | 129.07 lbf⋅ft |
| Replace nuts. | |
| First stage | 73.76 lbf⋅ft |
| Replace screws and nuts. | |
| Second stage | 90° |
| M14 | 129.07 lbf⋅ft |
| Replace nuts. | |
| First stage | 59 lbf⋅ft |
| Replace screws. | |
| Second stage | 90° |
| Union nuts | 5.9 lbf⋅ft |
| M14 × 1,5 screws | 103.26 lbf⋅ft |
| Tighten screws crosswise. | |
Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2017 BMW 2 Series M2 Convertible user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.
Before doing any DIY service please check your insurance policy and BMW warranty policy for your region. In some regions DIY service may invalidate your warranty.
Table of Contents
- Air Conditioning Compressor Oil Capacity
- Air Conditioning Refrigerant Capacity
- Automatic Transmission Fluid Capacity
- Brake Fluid Capacity
- Cooling Fluid Capacity
- Engine Oil Capacity
- Fluid and Lubricant Specifications
- Manual Transmission Oil Capacity
- Brake System Specifications
- Chassis Specifications
- Cooling System Specifications
- Electrical System Specifications
- Emission
- Engine Fastener Tightening Specifications
- Front Suspension Fastener Tightening Specifications
- Rear Suspension Fastener Tightening Specifications
- Transmission Fastener Tightening Specifications
Conquer your fears and never give up!
DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow BMW 2 Series M2 Convertible service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.
Doing basic service for your 2017 BMW 2 Series M2 Convertible you're not only saving money, but also also improving your technical skills and learning something new.