2002 Audi TT Roadster Quattro First generation facelift Rear Suspension Fastener Tightening Specifications
in your garage to make future searches easy.
| Condition | Value |
|---|
| Rear axle brake caliper | 25.81 lbf⋅ft |
| Use new screws. | |
| Rear axle brake caliper mounting support | 47.94 lbf⋅ft |
| Rear axle brake disc | 2.95 lbf⋅ft |
| On chassis | 44.25 lbf⋅ft |
| Use new screw. | |
| On stub axle | 81.13 lbf⋅ft |
| Use new screw. | |
| On chassis | 55.32 lbf⋅ft |
| Replace screws. | |
| First stage | 81.13 lbf⋅ft |
| Replace screws. | |
| Second stage | 90° |
| First step | 177.01 lbf⋅ft |
| Use new screw. | |
| Second step | 90° |
| Second stage | 180° detach. |
| First step | 177.01 lbf⋅ft |
| Second step | 90° |
| With glued wheel hub | 195.45 lbf⋅ft |
| Replace nuts. | |
| First stage | 140.14 lbf⋅ft |
| Replace nuts. | |
| Second stage | 90° |
| At the bearing pedestal | 66.38 lbf⋅ft |
| Replace screws. | |
| On chassis | 55.32 lbf⋅ft |
| Replace screws. | |
| Rear axle stabilizer mounting | 14.75 lbf⋅ft |
| Rear axle stabilizer support at the stabilizer | 18.44 lbf⋅ft |
| Replace nuts. | |
| Rear axle stabilizer support at the stub axle | 81.13 lbf⋅ft |
| First stage | 51.63 lbf⋅ft |
| Replace screws and nuts. | |
| Second stage | 90° |
| First stage | 51.63 lbf⋅ft |
| Replace screws and nuts. | |
| Second stage | 90° |
| First stage | 51.63 lbf⋅ft |
| Replace screws and nuts. | |
| Second stage | 90° |
| First stage | 51.63 lbf⋅ft |
| Replace screws and nuts. | |
| Second stage | 90° |
| First step | 177.01 lbf⋅ft |
| Use new screw. | |
| Second step | 90° |
| Second stage | 180° detach |
| First step | 177.01 lbf⋅ft |
| Second step | 90° |
| With glued wheel hub | 195.45 lbf⋅ft |
| Replace nuts. | |
| First stage | 140.14 lbf⋅ft |
| Replace nuts. | |
| Second stage | 90° |
| Wheel attachment | 88.51 lbf⋅ft |
Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2002 Audi TT Roadster Quattro user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.
Before doing any DIY service please check your insurance policy and Audi warranty policy for your region. In some regions DIY service may invalidate your warranty.
Table of Contents
- Air Conditioning Compressor Oil Capacity
- Air Conditioning Refrigerant Capacity
- All-wheel Drive Clutch Oil Capacity
- Axle Oil Capacity
- Brake Fluid Capacity
- Cooling Fluid Capacity
- Diagnostic Values
- Engine Oil Capacity
- Fluid and Lubricant Specifications
- Gearbox Oil Capacity
- Manual Transmission Oil Capacity
- Steering Fluid Capacity
- Brake System Specifications
- Chassis Specifications
- Cooling System Specifications
- Drive Belts Specifications
- Electrical System Specifications
- Emission
- Engine Fastener Tightening Specifications
- Front Suspension Fastener Tightening Specifications
- Rear Suspension Fastener Tightening Specifications
- Transmission Fastener Tightening Specifications
Conquer your fears and never give up!
DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Audi TT Roadster Quattro service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.
Doing basic service for your 2002 Audi TT Roadster Quattro you're not only saving money, but also also improving your technical skills and learning something new.