2001 Audi A3 S3 First generation facelift Transmission Fastener Tightening Specifications
in your garage to make future searches easy.
Condition | Value |
---|
AWD clutch oil control screws | 22.13 lbf⋅ft |
Replace sealing rings. | |
AWD clutch oil drain plug | 11.06 lbf⋅ft |
Drive shaft heat protection plate | 18.44 lbf⋅ft |
M10 | 51.63 lbf⋅ft |
Gradually tighten screws crosswise. | |
M8 | 29.5 lbf⋅ft |
Gradually tighten screws crosswise. |
First step | 177.01 lbf⋅ft |
Use new screw. | |
Second step | 90° |
Second stage | 90° detach. |
First step | 177.01 lbf⋅ft |
Second step | 90° |
First stage | 140.14 lbf⋅ft |
Replace nuts. | |
Second stage | 90° |
Propeller shaft heat protection plate | 18.44 lbf⋅ft |
Propeller shaft intermediate bearing | 18.44 lbf⋅ft |
M10 | 44.25 lbf⋅ft |
M8 | 29.5 lbf⋅ft |
First stage | 184.39 lbf⋅ft |
Replace nuts. | |
Second stage | 360° detach |
Third stage | 36.88 lbf⋅ft |
Fourth stage | 60° |
M8 | 29.5 lbf⋅ft |
Gradually tighten screws crosswise. |
Clutch master cylinder | 18.44 lbf⋅ft |
Replace nuts. |
Dual-mass flywheel | 9.59 lbf⋅ft |
Flywheel | 14.75 lbf⋅ft |
Flywheel | 16.23 lbf⋅ft |
Clutch slave cylinder | 8.85 lbf⋅ft |
Gearbox shift lever | 18.44 lbf⋅ft |
Selector cable linkage | 16.96 lbf⋅ft |
M10 | 33.19 lbf⋅ft |
Replace screws. | |
M12 | 59 lbf⋅ft |
Replace screws. |
Gearbox oil drain plug | 22.13 lbf⋅ft |
Torx screws | 33.19 lbf⋅ft |
Hexagon head screws | 22.13 lbf⋅ft |
Torx screws | 33.19 lbf⋅ft |
Hexagon head screws | 22.13 lbf⋅ft |
First stage | 44.25 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 44.25 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 2.21 lbf⋅ft |
Cast iron | |
Third stage | 33.19 lbf⋅ft |
Second stage | 25.81 lbf⋅ft |
Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2001 Audi A3 S3 user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.
Before doing any DIY service please check your insurance policy and Audi warranty policy for your region. In some regions DIY service may invalidate your warranty.
Table of Contents
- Air Conditioning Compressor Oil Capacity
- Air Conditioning Refrigerant Capacity
- All-wheel Drive Clutch Oil Capacity
- Axle Oil Capacity
- Brake Fluid Capacity
- Cooling Fluid Capacity
- Diagnostic Values
- Engine Oil Capacity
- Fluid and Lubricant Specifications
- Manual Transmission Oil Capacity
- Steering Fluid Capacity
- Brake System Specifications
- Chassis Specifications
- Cooling System Specifications
- Drive Belts Specifications
- Emission
- Engine Fastener Tightening Specifications
- Front Suspension Fastener Tightening Specifications
- Rear Suspension Fastener Tightening Specifications
- Transmission Fastener Tightening Specifications
Conquer your fears and never give up!
DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Audi A3 S3 service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.
Doing basic service for your 2001 Audi A3 S3 you're not only saving money, but also also improving your technical skills and learning something new.