in your garage to make future searches easy.

Condition Value
expand_moreAxle drive
expand_moreDrive shaft heat protection plate
Rear 16.96 lbf⋅ft
expand_moreFront axle drive shaft
First stage 147.51 lbf⋅ft
Replace screws.
Second stage 180°
Propeller shaft intermediate bearing 14.75 lbf⋅ft
expand_moreRear axle drive shaft
First stage 147.51 lbf⋅ft
Replace screws.
Second stage 180°
expand_moreTransfer case propeller shaft rear axle
First stage 22.13 lbf⋅ft
Replace screws and nuts.
Second stage 90°
expand_moreDifferential
Front axle differential oil drain plug 7.38 lbf⋅ft
Front axle differential oil filler plug 22.13 lbf⋅ft
expand_moreRear axle differential
expand_moreAt the front side at the subframe
First stage 95.88 lbf⋅ft
Replace screws.
Second stage 180°
expand_moreAt the subframe on the rear side
First stage 66.38 lbf⋅ft
Replace screws.
Second stage 90°
Rear axle differential oil drain plug 11.06 lbf⋅ft
Rear axle differential oil filler screws 11.06 lbf⋅ft
expand_moreGearbox
expand_moreGearbox flange connection at engine
M10 × 50 screws 47.94 lbf⋅ft
expand_moreM10 × 75 and M10 × 95 screws
First stage 11.06 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreM12
First stage 22.13 lbf⋅ft
Replace screws.
Second stage 90°
Torque converter 44.25 lbf⋅ft
Replace screws.
expand_moreGearbox lubrication
Distributor gearbox oil drain plug 8.85 lbf⋅ft
Distributor gearbox oil filler screws 19.91 lbf⋅ft
Gear oil cooler lines 14.75 lbf⋅ft
Gearbox oil filler plug 22.13 lbf⋅ft
Transmission-oil cooler 5.9 lbf⋅ft
expand_moreGearbox mounting
Gearbox cross support 40.57 lbf⋅ft
expand_moreGearbox mounting
First stage 14.75 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreGearbox support
At the gearbox bracket 14.75 lbf⋅ft
At the gearbox 29.5 lbf⋅ft
expand_moreTransfer case
expand_moreTransfer box onto transmission flange connection
First stage 2.21 lbf⋅ft
Use new screws and tighten them crosswise.
Second stage 7.38 lbf⋅ft
Third stage 90°

Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2023 Audi Q7 user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.

Before doing any DIY service please check your insurance policy and Audi warranty policy for your region. In some regions DIY service may invalidate your warranty.

Conquer your fears and never give up!

DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Audi Q7 service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.

Doing basic service for your 2023 Audi Q7 you're not only saving money, but also also improving your technical skills and learning something new.

Units:
facebook twitter reddit linkedin messenger whatsapp telegram skype email chat