2021 Audi Q7 Second generation Front Suspension Fastener Tightening Specifications
in your garage to make future searches easy.
| Condition | Value |
|---|
| Bleed valve | 7.38 lbf⋅ft |
| At the brake caliper | 10.33 lbf⋅ft |
| At the brake hose | 10.33 lbf⋅ft |
| On wheel hub | 144.56 lbf⋅ft |
| Replace screws. | |
| Front axle brake disc | 7.38 lbf⋅ft |
| Wheel speed sensor | 6.64 lbf⋅ft |
| First stage | 14.75 lbf⋅ft |
| Replace screws. | |
| Second stage | 90° |
| Steering column | 14.75 lbf⋅ft |
| Use new screws. | |
| First stage | 59 lbf⋅ft |
| Replace screws. | |
| Second stage | 180° |
| First stage | 22.13 lbf⋅ft |
| Replace screws. | |
| Second stage | 90° |
| Track rod end on stub axle | 103.26 lbf⋅ft |
| Replace nuts. | |
| Track rod end on track rod | 59 lbf⋅ft |
| Track rod on steering gear | 73.76 lbf⋅ft |
| First stage | 14.75 lbf⋅ft |
| Replace screws. | |
| Second stage | 45° |
| With steel suspension | 36.88 lbf⋅ft |
| Replace nuts. | |
| First stage | 29.5 lbf⋅ft |
| Replace screws and nuts. | |
| Second stage | 180° |
| First stage | 29.5 lbf⋅ft |
| Replace screws and nuts. | |
| Second stage | 180° |
| First stage | 147.51 lbf⋅ft |
| Replace screws. | |
| Second stage | 180° |
| Support joint at the stub axle | 29.5 lbf⋅ft |
| Replace screws and nuts. | |
| Support joint bottom down on the wishbone | 88.51 lbf⋅ft |
| Replace nuts. | |
| First stage | 36.88 lbf⋅ft |
| Replace screws and nuts. | |
| Second stage | 90° |
| On stub axle | 29.5 lbf⋅ft |
| Replace screws and nuts. | |
| Front suspension cross-brace | 18.44 lbf⋅ft |
| Use new screws. | |
| First stage | 51.63 lbf⋅ft |
| Replace screws and nuts. | |
| Second stage | 180° |
| On stub axle | 88.51 lbf⋅ft |
| Replace nuts. | |
| First stage | 51.63 lbf⋅ft |
| Replace screws and nuts. | |
| Second stage | 180° |
| On stub axle | 88.51 lbf⋅ft |
| Replace nuts. | |
| First stage | 36.88 lbf⋅ft |
| Replace screws and nuts. | |
| Second stage | 90° |
| On stub axle | 29.5 lbf⋅ft |
| Replace screws and nuts. | |
| First stage | 59 lbf⋅ft |
| Replace screws. | |
| Second stage | 90° |
| Wheel attachment | 118.01 lbf⋅ft |
Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2021 Audi Q7 user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.
Before doing any DIY service please check your insurance policy and Audi warranty policy for your region. In some regions DIY service may invalidate your warranty.
Table of Contents
- Air Conditioning Compressor Oil Capacity
- Air Conditioning Refrigerant Capacity
- Automatic Transmission Fluid Capacity
- Axle Oil Capacity
- Brake Fluid Capacity
- Cooling Fluid Capacity
- Engine Oil Capacity
- Fluid and Lubricant Specifications
- Gearbox Oil Capacity
- Brake System Specifications
- Chassis Specifications
- Cooling System Specifications
- Electrical System Specifications
- Emission
- Chassis and Body Fastener Tightening Specifications
- Engine Fastener Tightening Specifications
- Front Suspension Fastener Tightening Specifications
- Rear Suspension Fastener Tightening Specifications
- Transmission Fastener Tightening Specifications
Conquer your fears and never give up!
DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Audi Q7 service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.
Doing basic service for your 2021 Audi Q7 you're not only saving money, but also also improving your technical skills and learning something new.