2027 Audi Q5 SQ5 First generation Engine Fastener Tightening Specifications
in your garage to make future searches easy.
Condition | Value |
---|
First stage | Screw in screw(s) by hand. |
Second stage | 3.69 lbf⋅ft |
Third stage | 6.64 lbf⋅ft |
All Audi diesel V6 3.0 L CGQB engines | 16.96 lbf⋅ft |
All Audi diesel V6 3.0 L CVUC engines | 16.96 lbf⋅ft |
First stage | 36.88 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 5.9 lbf⋅ft |
Replace screws. | |
Second stage | 180° |
Steel screws | 18.44 lbf⋅ft |
First stage | 3.69 lbf⋅ft |
Tighten cross-wise. | |
Second stage | 29.5 lbf⋅ft |
M6 | 6.64 lbf⋅ft |
M8 | 18.44 lbf⋅ft |
Alternator | 16.96 lbf⋅ft |
First stage | 3.69 lbf⋅ft |
Tighten cross-wise. | |
Second stage | 29.5 lbf⋅ft |
Screws | 6.64 lbf⋅ft |
Union nuts | 28.03 lbf⋅ft |
Use new seals. |
Servo pump pulley | 16.96 lbf⋅ft |
Servo steering pump | 16.96 lbf⋅ft |
Tensioning device for air-conditioning compressor auxiliary drive belt | 29.5 lbf⋅ft |
All Audi diesel V6 3.0 L CGQB engines | 16.23 lbf⋅ft |
All Audi diesel V6 3.0 L CVUC engines | 16.23 lbf⋅ft |
High-pressure line | 18.44 lbf⋅ft |
All Audi diesel V6 3.0 L CGQB engines | 16.23 lbf⋅ft |
All Audi diesel V6 3.0 L CVUC engines | 16.23 lbf⋅ft |
High-pressure pump pulley | 51.63 lbf⋅ft |
Injection hoses | 18.44 lbf⋅ft |
First stage | 4.43 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
Nuts | 14.75 lbf⋅ft |
Stud screws | 12.54 lbf⋅ft |
Screws | 16.96 lbf⋅ft |
Replace screws. Use hot screw paste. |
Coolant pump | 6.64 lbf⋅ft |
All Audi diesel V6 3.0 L CGQB engines | 16.96 lbf⋅ft |
All Audi diesel V6 3.0 L CVUC engines | 16.96 lbf⋅ft |
First stage | Screw in screw(s) by hand. |
Second stage | 6.64 lbf⋅ft |
First stage | Screw in screw(s) by hand. |
Replace screws. See figure 1. | |
Second stage | 25.81 lbf⋅ft |
Third stage | 51.63 lbf⋅ft |
Fourth stage | 90° |
Fifth stage | 90° |
First stage | Screw in screw(s) by hand. |
Replace screws. See figure 2. | |
Second stage | 5.9 lbf⋅ft |
Third stage | 90° |
Central screws | 44.25 lbf⋅ft |
First stage | 22.13 lbf⋅ft |
Shaft must be replaced when the screw connection has been loosened. | |
Second stage | 90° |
Wheel | 16.96 lbf⋅ft |
First stage | 25.81 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 44.25 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
All Audi diesel V6 3.0 L CGQB engines | 18.44 lbf⋅ft |
All Audi diesel V6 3.0 L CVUC engines | 18.44 lbf⋅ft |
First stage | 22.13 lbf⋅ft |
Replace screws. See figure 3. | |
Second stage | 36.88 lbf⋅ft |
Third stage | 180° |
First stage | 14.75 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | Screw in screw(s) by hand. |
See figure 4. | |
Second stage | 6.64 lbf⋅ft |
Third stage | 2.21 lbf⋅ft |
Replace screws. | |
Fourth stage | 2.21 lbf⋅ft |
Sixth stage | 90° |
Fifth stage | 5.9 lbf⋅ft |
First stage | 3.69 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 3.69 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
Camshaft timing chain tensioning rail | 16.96 lbf⋅ft |
Camshaft timing gear | 16.96 lbf⋅ft |
Control drive chain tensioner | 6.64 lbf⋅ft |
First stage | 7.38 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 59 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 22.13 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 3.69 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 5.9 lbf⋅ft |
Replace screws. | |
Second stage | 45° |
First stage | 3.69 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 3.69 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 59 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
Tension rail bearing screws | 16.96 lbf⋅ft |
First stage | Screw in screw(s) by hand. |
Replace screws. | |
Second stage | 5.9 lbf⋅ft |
Third stage | 90° |
First stage | Screw in screw(s) by hand. |
Replace screws. | |
Second stage | 5.9 lbf⋅ft |
Third stage | 90° |
First stage | 2.21 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
Oil drain plug | 22.13 lbf⋅ft |
Replace sealing rings. |
Oil filter cover | 25.81 lbf⋅ft |
Replace sealing rings. | |
On timing case cover | 6.64 lbf⋅ft |
Replace sealing rings. |
First stage | Screw in screw(s) by hand |
Replace screws. | |
Second stage | 5.9 lbf⋅ft |
Third stage | 90° |
First stage | 22.13 lbf⋅ft |
Replace screws. | |
Second stage | 45° |
Camshaft sensor | 6.64 lbf⋅ft |
Charge air pressure sensor | 7.38 lbf⋅ft |
Crankshaft sensor | 6.64 lbf⋅ft |
Exhaust gas temperature sensor | 33.19 lbf⋅ft |
Glow plugs | 8.85 lbf⋅ft |
Knock sensor | 18.44 lbf⋅ft |
Lambda sensor | 40.57 lbf⋅ft |
Engine bracket | 29.5 lbf⋅ft |
At the subframe | 40.57 lbf⋅ft |
First stage | 66.38 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 84.82 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 66.38 lbf⋅ft |
Replace screws. | |
Second stage | 135° |
First stage | 66.38 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
On the engine block | 51.63 lbf⋅ft |
At the crossmember | 22.13 lbf⋅ft |
On chassis | 14.75 lbf⋅ft |
Catalytic converter | 16.96 lbf⋅ft |
Replace nuts. Use hot screw paste. | |
Catalytic converter bracket | 16.96 lbf⋅ft |
Diesel particulate filter | 16.96 lbf⋅ft |
Replace nuts. | |
Exhaust manifold | 18.44 lbf⋅ft |
Replace nuts. Use hot screw paste. | |
Exhaust pipe | 16.96 lbf⋅ft |
Replace nuts. | |
Exhaust pipe bracket | 16.96 lbf⋅ft |
Exhaust pipe rear | 18.44 lbf⋅ft |
Spark plugs | 22.13 lbf⋅ft |
M10 | 47.94 lbf⋅ft |
First stage | 22.13 lbf⋅ft |
Second stage | 90° |
Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2027 Audi Q5 SQ5 user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.
Before doing any DIY service please check your insurance policy and Audi warranty policy for your region. In some regions DIY service may invalidate your warranty.
Table of Contents
- Air Conditioning Compressor Oil Capacity
- Air Conditioning Refrigerant Capacity
- Automatic Transmission Fluid Capacity
- Axle Oil Capacity
- Brake Fluid Capacity
- Cooling Fluid Capacity
- Engine Oil Capacity
- Fluid and Lubricant Specifications
- Gearbox Oil Capacity
- Engine Fastener Tightening Specifications
- Front Suspension Fastener Tightening Specifications
- Rear Suspension Fastener Tightening Specifications
- Transmission Fastener Tightening Specifications
Conquer your fears and never give up!
DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Audi Q5 SQ5 service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.
Doing basic service for your 2027 Audi Q5 SQ5 you're not only saving money, but also also improving your technical skills and learning something new.