2013 Audi Q5 Quattro engine fastener tightening specifications

in your garage to make future searches easy.

Condition	Value

expand_moreAir intake system

expand_moreIntake manifold

expand_moreAll Audi diesel V6 3.0 L CDUD engines


First stage	Screw in screw(s) by hand.
Second stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Third stage	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m

expand_moreAll Audi diesel straight-4 2.0 L CNHA engines

Figure 1. Air intake system, Intake manifold, Audi diesel straight-4 2.0 L CNHA.


First stage	Screw in new screw(s) hand-tight.
See figure 1.
Second stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Third stage	90°90°90°

expand_moreAll Audi gasoline straight-4 2.0 L CPMB engines


First stage	2.21 lbf⋅ft2.21 lbf⋅ft3 N⋅m
Second stage	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m

expand_moreAll Audi diesel V6 3.0 L CTBA engines


First stage	Screw in screw(s) by hand.
Second stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Third stage	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m


All other modifications	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m

expand_moreIntake manifold support

expand_moreAll Audi gasoline straight-4 2.0 L CNCD engines


Nuts	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Screws	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreAll Audi diesel straight-4 2.0 L CNHA engines


First stage	screw in manually up to stop
Second stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreAll Audi gasoline straight-4 2.0 L CPMB engines


Nuts	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Screws	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreAuxiliary assemblies

expand_moreAuxiliary drive belt deflection pulley


All Audi gasoline straight-4 2.0 L CAEB engines	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreAll Audi diesel straight-4 2.0 L CAHB engines


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Second stage	90°90°90°


All Audi gasoline V6 3.2 L CALB engines	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
All Audi diesel V6 3.0 L CCWA engines	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m
All Audi diesel V6 3.0 L CCWB engines	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m
All Audi gasoline straight-4 2.0 L CDNB engines	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
All Audi gasoline straight-4 2.0 L CDNC engines	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
All Audi diesel V6 3.0 L CDUD engines	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m
All Audi gasoline straight-4 2.0 L CNCB engines	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
All Audi gasoline straight-4 2.0 L CPMA engines	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
All Audi diesel V6 3.0 L CPNB engines	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m
All Audi diesel V6 3.0 L CTBA engines	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m
All Audi gasoline V6 3.0 L CTUC engines	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
All Audi gasoline V6 3.0 L CTVA engines	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m

expand_moreAll other modifications


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Use new screw.
Second stage	90°90°90°

expand_moreAuxiliary drive belt tensioner

expand_moreAll Audi diesel straight-4 2.0 L CAGB engines


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Second stage	180°180°180°


All Audi diesel straight-4 2.0 L CAHA engines	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m
All Audi diesel straight-4 2.0 L CAHB engines	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m

expand_moreAll Audi diesel V6 3.0 L CCWB engines

expand_moreM10


First stage	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
Replace screws.
Second stage	90°90°90°


M8	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m

expand_moreAll Audi diesel V6 3.0 L CDUD engines


First stage	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
Replace screws.
Second stage	90°90°90°


All Audi diesel straight-4 2.0 L CGLA engines	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m
All Audi diesel straight-4 2.0 L CGLB engines	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m

expand_moreAll Audi diesel straight-4 2.0 L CGLC engines


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Use new screw.
Second stage	180°180°180°


All Audi diesel straight-4 2.0 L CGLD engines	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m

expand_moreAll Audi diesel straight-4 2.0 L CJCD engines


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Use new screw.
Second stage	180°180°180°


All Audi diesel straight-4 2.0 L CMGA engines	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m

expand_moreAll Audi gasoline straight-4 2.0 L CNCD engines


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Replace screws.
Second stage	45°45°45°

expand_moreAll Audi diesel straight-4 2.0 L CNHA engines


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace screws.
Second stage	90°90°90°


All Audi diesel straight-4 2.0 L CNHC engines	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m

expand_moreAll Audi gasoline straight-4 2.0 L CPMB engines


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Replace screws.
Second stage	45°45°45°

expand_moreAll Audi diesel V6 3.0 L CTBA engines


First stage	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
Replace screws.
Second stage	90°90°90°


All other modifications	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m

expand_moreAir-conditioning compressor


All Audi diesel straight-4 2.0 L CAGA engines	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m
All Audi diesel straight-4 2.0 L CAGB engines	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m

expand_moreAll Audi diesel straight-4 2.0 L CGLC engines

expand_moreAluminium screws


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Replace screws.
Second stage	180°180°180°


Steel screws	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m


All Audi diesel straight-4 2.0 L CJCA engines	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m
All Audi diesel straight-4 2.0 L CJCB engines	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m

expand_moreAll Audi diesel straight-4 2.0 L CJCD engines

expand_moreAluminium screws


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Replace screws.
Second stage	180°180°180°


Steel screws	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m


All Audi diesel straight-4 2.0 L CSUB engines	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m
All other modifications	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m

expand_moreAir-conditioning compressor bracket


All Audi gasoline V6 3.2 L CALB engines	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
All Audi diesel V6 3.0 L CCWA engines	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
All Audi diesel V6 3.0 L CCWB engines	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m

expand_moreAll Audi gasoline straight-4 2.0 L CDNB engines


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll Audi gasoline straight-4 2.0 L CDNC engines


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll Audi diesel V6 3.0 L CDUD engines


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Tighten cross-wise.
Second stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m

expand_moreAll Audi diesel straight-4 2.0 L CGLC engines

expand_moreM10


First stage	Tighten bolt(s) until hand-tight.
Replace screws.
Second stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m

expand_moreM10 × 155 screws


Third stage	180°180°180°

expand_moreM10 × 40 screws


Third stage	60°60°60°

expand_moreM10 × 60 screws


Third stage	60°60°60°

expand_moreAll Audi gasoline straight-4 2.0 L CHJA engines


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Tighten the new screws evenly in several steps.
Second stage	90°90°90°

expand_moreAll Audi diesel straight-4 2.0 L CJCD engines

expand_moreM10


First stage	Tighten bolt(s) until hand-tight.
Replace screws.
Second stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m

expand_moreM10 × 155 screws


Third stage	180°180°180°

expand_moreM10 × 40 screws


Third stage	60°60°60°

expand_moreM10 × 60 screws


Third stage	60°60°60°

expand_moreAll Audi gasoline straight-4 2.0 L CNCD engines


First stage	Tighten bolt(s) until hand-tight.
Replace screws.
Second stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Third stage	90°90°90°

expand_moreAll Audi diesel straight-4 2.0 L CNHA engines

expand_moreM10


First stage	Tighten bolt(s) until hand-tight.
Replace screws.
Second stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m

expand_moreM10 × 115 screws


Third stage	180°180°180°

expand_moreM10 × 175 screws


Third stage	180°180°180°

expand_moreM10 × 35 screws


Third stage	45°45°45°

expand_moreAll Audi gasoline straight-4 2.0 L CPMB engines


First stage	Tighten bolt(s) until hand-tight.
Replace screws.
Second stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Third stage	90°90°90°


All Audi diesel V6 3.0 L CPNB engines	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m

expand_moreAll Audi diesel V6 3.0 L CTBA engines


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Tighten cross-wise.
Second stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m

expand_moreAll other modifications

expand_moreM10 × 155 screws


First stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Replace screws.
Second stage	180°180°180°

expand_moreM10 × 40 screws


First stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Replace screws.
Second stage	60°60°60°

expand_moreM10 × 60 screws


First stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Replace screws.
Second stage	60°60°60°

expand_moreAir-conditioning compressor pressure line


All Audi gasoline straight-4 2.0 L CHJA engines	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m

expand_moreAll other modifications


M6	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
M8	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m


Alternator	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m

expand_moreGenerator bracket

expand_moreAll Audi diesel straight-4 2.0 L CAGB engines

expand_moreM10 × 155 screws


First stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Replace screws.
Second stage	180°180°180°

expand_moreM10 × 40 screws


First stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Replace screws.
Second stage	60°60°60°

expand_moreM10 × 60 screws


First stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Replace screws.
Second stage	60°60°60°


All Audi diesel V6 3.0 L CCWA engines	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
All Audi diesel V6 3.0 L CCWB engines	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m

expand_moreAll Audi gasoline straight-4 2.0 L CDNB engines


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll Audi gasoline straight-4 2.0 L CDNC engines


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll Audi diesel V6 3.0 L CDUD engines


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Tighten cross-wise.
Second stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m

expand_moreAll Audi diesel straight-4 2.0 L CGLC engines

expand_moreM10


First stage	Tighten bolt(s) until hand-tight.
Replace screws.
Second stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m

expand_moreM10 × 155 screws


Third stage	180°180°180°

expand_moreM10 × 40 screws


Third stage	60°60°60°

expand_moreM10 × 60 screws


Third stage	60°60°60°

expand_moreAll Audi diesel straight-4 2.0 L CJCD engines

expand_moreM10


First stage	Tighten bolt(s) until hand-tight.
Replace screws.
Second stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m

expand_moreM10 × 155 screws


Third stage	180°180°180°

expand_moreM10 × 40 screws


Third stage	60°60°60°

expand_moreM10 × 60 screws


Third stage	60°60°60°

expand_moreAll Audi gasoline straight-4 2.0 L CNCD engines


First stage	Tighten bolt(s) until hand-tight.
Replace screws.
Second stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Third stage	90°90°90°

expand_moreAll Audi diesel straight-4 2.0 L CNHA engines

expand_moreM10


First stage	Tighten bolt(s) until hand-tight.
Replace screws.
Second stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m

expand_moreM10 × 115 screws


Third stage	180°180°180°

expand_moreM10 × 175 screws


Third stage	180°180°180°

expand_moreM10 × 35 screws


Third stage	45°45°45°

expand_moreAll Audi gasoline straight-4 2.0 L CPMB engines


First stage	Tighten bolt(s) until hand-tight.
Replace screws.
Second stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Third stage	90°90°90°


All Audi diesel V6 3.0 L CPNB engines	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m

expand_moreAll Audi diesel V6 3.0 L CTBA engines


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Tighten cross-wise.
Second stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m

expand_moreAll other modifications

expand_moreM10 × 155 screws


First stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Replace screws.
Second stage	180°180°180°

expand_moreM10 × 30 screws


First stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Replace screws.
Second stage	45°45°45°

expand_moreM10 × 40 screws


First stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreM10 × 52 screws


First stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreM10 × 60 screws


First stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Replace screws.
Second stage	90°90°90°

expand_morePower steering pump bracket

expand_moreAll Audi gasoline straight-4 2.0 L CDNB engines


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll other modifications

expand_moreM10 × 155 screws


First stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Replace screws.
Second stage	180°180°180°

expand_moreM10 × 40 screws


First stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Replace screws.
Second stage	60°60°60°

expand_moreM10 × 60 screws


First stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Replace screws.
Second stage	60°60°60°

expand_moreHydraulic lines at the servo-steering pump

expand_moreAll Audi diesel V6 3.0 L CCWB engines


Screws	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Union nuts	28.03 lbf⋅ft28.03 lbf⋅ft38 N⋅m
Use new seals.

expand_moreAll Audi diesel V6 3.0 L CDUD engines


Screws	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Union nuts	28.03 lbf⋅ft28.03 lbf⋅ft38 N⋅m
Use new seals.

expand_moreAll Audi diesel V6 3.0 L CTBA engines


Screws	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Union nuts	28.03 lbf⋅ft28.03 lbf⋅ft38 N⋅m
Use new seals.

expand_moreAll Audi gasoline V6 3.0 L CTUC engines


Screws	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Union nuts	28.03 lbf⋅ft28.03 lbf⋅ft38 N⋅m

expand_moreAll other modifications


Screws	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Union nuts	28.03 lbf⋅ft28.03 lbf⋅ft38 N⋅m
Replace sealing rings.

expand_moreServo pump pulley


All Audi gasoline straight-4 2.0 L CAEB engines	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
All Audi gasoline V6 3.2 L CALB engines	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m
All Audi diesel V6 3.0 L CCWA engines	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m
All Audi diesel V6 3.0 L CCWB engines	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m
All Audi gasoline straight-4 2.0 L CDNB engines	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
All Audi gasoline straight-4 2.0 L CDNC engines	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
All Audi diesel V6 3.0 L CDUD engines	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m
All Audi gasoline straight-4 2.0 L CHJA engines	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
All Audi gasoline straight-4 2.0 L CNCB engines	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
All Audi gasoline straight-4 2.0 L CNCD engines	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
All Audi gasoline straight-4 2.0 L CPMA engines	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
All Audi diesel V6 3.0 L CPNB engines	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m
All Audi diesel V6 3.0 L CTBA engines	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m
All Audi diesel straight-6 3.0 L CTBC engines	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m

expand_moreAll other modifications


With a special tool	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Without special tool	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m

expand_moreServo steering pump


All Audi gasoline straight-4 2.0 L CAEB engines	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
All Audi gasoline straight-4 2.0 L CDNB engines	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
All Audi gasoline straight-4 2.0 L CDNC engines	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
All Audi gasoline straight-4 2.0 L CHJA engines	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
All Audi gasoline straight-4 2.0 L CNCB engines	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
All Audi gasoline straight-4 2.0 L CNCD engines	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
All Audi gasoline straight-4 2.0 L CPMA engines	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
All other modifications	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m


Tensioning device for air-conditioning compressor auxiliary drive belt	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Vacuum pump	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m

expand_moreCarburetion

expand_moreInjection pump drive wheel

expand_more3.0 TDI quattro with diesel V6 3.0 L 208 HP engine (2008.11–)


Central camshaft screws	55.32 lbf⋅ft55.32 lbf⋅ft75 N⋅m


Exhaust gas return cooler	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Exhaust gas return valve	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m

expand_moreExhaust recirculation pipe


First stage	Screw in manually up to stop.
Second stage	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Clamps	1.84 lbf⋅ft1.84 lbf⋅ft2.5 N⋅m

expand_moreFuel-distributing pipe


All Audi gasoline straight-4 2.0 L CNCD engines	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
All Audi diesel straight-4 2.0 L CNHA engines	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
All Audi gasoline straight-4 2.0 L CPMB engines	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
All Audi gasoline V6 3.0 L CTUC engines	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
All Audi gasoline V6 3.0 L CTVA engines	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
All other modifications	16.23 lbf⋅ft16.23 lbf⋅ft22 N⋅m

expand_moreHigh-pressure line


All Audi gasoline straight-4 2.0 L CHJA engines	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreAll Audi gasoline straight-4 2.0 L CNCD engines


Union nuts	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m


All Audi diesel straight-4 2.0 L CNHA engines	20.65 lbf⋅ft20.65 lbf⋅ft28 N⋅m
All Audi gasoline straight-4 2.0 L CPMB engines	19.91 lbf⋅ft19.91 lbf⋅ft27 N⋅m
All other modifications	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Oil thread.

expand_moreHigh-pressure pump

expand_moreAll Audi diesel straight-4 2.0 L CAGA engines

expand_moreCAGA engine

expand_moreM8 × 28 screws


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreCJCA engine

expand_moreM8 × 28 screws


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace screws.
Second stage	45°45°45°

expand_moreM8 × 90 screws


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace screws.
Second stage	180°180°180°

expand_moreAll Audi diesel straight-4 2.0 L CAGB engines

expand_moreCAGB engine

expand_moreM8 × 28 screws


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreCJCB engine

expand_moreM8 × 28 screws


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace screws.
Second stage	45°45°45°

expand_moreM8 × 90 screws


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace screws.
Second stage	180°180°180°


All Audi diesel V6 3.0 L CCWA engines	16.23 lbf⋅ft16.23 lbf⋅ft22 N⋅m
All Audi diesel V6 3.0 L CDUD engines	16.23 lbf⋅ft16.23 lbf⋅ft22 N⋅m

expand_moreAll Audi diesel straight-4 2.0 L CGLC engines

expand_moreM8


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace screws.

expand_moreM8 × 28 screws


Second stage	45°45°45°

expand_moreM8 × 90 screws


Second stage	180°180°180°


All Audi gasoline straight-4 2.0 L CHJA engines	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Tighten bolts uniformly in several passes.

expand_moreAll Audi diesel straight-4 2.0 L CJCD engines

expand_moreM8


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace screws.

expand_moreM8 × 28 screws


Second stage	45°45°45°

expand_moreM8 × 90 screws


Second stage	180°180°180°


All Audi gasoline straight-4 2.0 L CNCD engines	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreAll Audi diesel straight-4 2.0 L CNHA engines

expand_moreM8 × 30 screws


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace screws.
Second stage	45°45°45°

expand_moreM8 × 90 screws


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace screws.
Second stage	180°180°180°


All Audi gasoline straight-4 2.0 L CPMB engines	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Tighten bolts uniformly in several passes.
All Audi diesel V6 3.0 L CPNB engines	16.23 lbf⋅ft16.23 lbf⋅ft22 N⋅m
All Audi diesel V6 3.0 L CTBA engines	16.23 lbf⋅ft16.23 lbf⋅ft22 N⋅m

expand_moreAll Audi gasoline V6 3.0 L CTUC engines


First stage	Screw in screw(s) by hand.
Second stage	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m


High-pressure pump drive wheel	55.32 lbf⋅ft55.32 lbf⋅ft75 N⋅m

expand_moreHigh-pressure pump pulley

expand_moreAll Audi diesel straight-4 2.0 L CAGA engines


Central nuts	70.07 lbf⋅ft70.07 lbf⋅ft95 N⋅m
Wheel	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace bolts.

expand_moreAll Audi diesel V6 3.0 L CCWB engines


Central nuts	51.63 lbf⋅ft51.63 lbf⋅ft70 N⋅m


All Audi diesel V6 3.0 L CDUD engines	51.63 lbf⋅ft51.63 lbf⋅ft70 N⋅m

expand_moreAll Audi diesel straight-4 2.0 L CGLC engines


Central nuts	70.07 lbf⋅ft70.07 lbf⋅ft95 N⋅m
Wheel	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace bolts.

expand_moreAll Audi diesel straight-4 2.0 L CJCD engines


Central nuts	70.07 lbf⋅ft70.07 lbf⋅ft95 N⋅m
Wheel	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace bolts.

expand_moreAll Audi diesel straight-4 2.0 L CNHA engines


Central nuts	70.07 lbf⋅ft70.07 lbf⋅ft95 N⋅m


All Audi diesel V6 3.0 L CTBA engines	51.63 lbf⋅ft51.63 lbf⋅ft70 N⋅m

expand_moreAll other modifications


Central nuts	70.07 lbf⋅ft70.07 lbf⋅ft95 N⋅m
Wheel	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace screws.

expand_moreInjection hoses


All Audi diesel straight-4 2.0 L CNHA engines	20.65 lbf⋅ft20.65 lbf⋅ft28 N⋅m
All other modifications	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m

expand_moreInjection nozzle (injector)

expand_moreAll Audi diesel straight-4 2.0 L CAGA engines

expand_moreCAGA engine


Nuts	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Screws	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m

expand_moreCJCA engine


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Use new screw.
Second stage	180°180°180°

expand_moreAll Audi diesel straight-4 2.0 L CAGB engines

expand_moreCAGB engine


Nuts	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Screws	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m

expand_moreCJCB engine


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Use new screw.
Second stage	180°180°180°

expand_moreAll Audi diesel V6 3.0 L CCWA engines


First stage	4.43 lbf⋅ft4.43 lbf⋅ft6 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll Audi diesel V6 3.0 L CDUD engines


First stage	4.43 lbf⋅ft4.43 lbf⋅ft6 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll Audi diesel straight-4 2.0 L CNHA engines


First stage	1.48 lbf⋅ft1.48 lbf⋅ft2 N⋅m
Replace screws.
Second stage	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Third stage	180°180°180°

expand_moreAll Audi diesel V6 3.0 L CTBA engines


First stage	4.43 lbf⋅ft4.43 lbf⋅ft6 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll other modifications


First stage	1.48 lbf⋅ft1.48 lbf⋅ft2 N⋅m
Replace screws.
Second stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Third stage	180°180°180°

expand_moreInjection pump


High-pressure pump	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_morePressure tube connection

expand_moreAll Audi gasoline straight-4 2.0 L CNCD engines


On high-pressure pump	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Replace components.
On rail	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Replace components.


All other modifications	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Replace components.

expand_moreCharging


Charge air pipes	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m

expand_moreCharge air compressor


Nuts	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Stud screws	12.54 lbf⋅ft12.54 lbf⋅ft17 N⋅m

expand_moreTurbo charger

expand_moreAll Audi diesel V6 3.0 L CCWB engines


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll Audi diesel V6 3.0 L CDUD engines


Screws	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m
Replace screws. Use hot screw paste.

expand_moreAll Audi diesel V6 3.0 L CTBA engines


Screws	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m
Replace screws. Use hot screw paste.


All other modifications	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Replace the nuts and use fitting paste

expand_moreTurbocharger bracket


All Audi diesel V6 3.0 L CCWA engines	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
All Audi gasoline straight-4 2.0 L CNCD engines	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m

expand_moreAll Audi diesel straight-4 2.0 L CNHA engines


At the turbocharger	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
On the engine block	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m


All Audi gasoline straight-4 2.0 L CPMB engines	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
All Audi diesel V6 3.0 L CPNB engines	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m

expand_moreAll other modifications


M10	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
M8	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreTurbocharger coolant feed line


All Audi gasoline straight-4 2.0 L CNCD engines	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m

expand_moreAll Audi gasoline straight-4 2.0 L CPMB engines


Banjo screws	25.81 lbf⋅ft25.81 lbf⋅ft35 N⋅m
Replace sealing rings.

expand_moreTurbocharger coolant return line


All Audi gasoline straight-4 2.0 L CNCD engines	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m

expand_moreAll Audi gasoline straight-4 2.0 L CPMB engines


Banjo screws	25.81 lbf⋅ft25.81 lbf⋅ft35 N⋅m
Replace sealing rings.

expand_moreTurbocharger oil feed line


All Audi gasoline straight-4 2.0 L CNCD engines	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m

expand_moreAll Audi diesel straight-4 2.0 L CNHA engines


Banjo screws	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Replace sealing rings.
Union nuts	16.23 lbf⋅ft16.23 lbf⋅ft22 N⋅m

expand_moreAll Audi gasoline straight-4 2.0 L CPMB engines


Banjo screws	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Replace sealing rings.
Screws	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Replace sealing rings.

expand_moreAll other modifications


Banjo screws	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Union nuts	16.23 lbf⋅ft16.23 lbf⋅ft22 N⋅m

expand_moreTurbocharger oil return line

expand_moreAll Audi gasoline straight-4 2.0 L CNCD engines


M6	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
M8	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m

expand_moreAll Audi diesel straight-4 2.0 L CNHA engines


At the turbocharger	10.33 lbf⋅ft10.33 lbf⋅ft14 N⋅m
On engine sump	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m


All other modifications	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m

expand_moreCooling system

expand_moreCoolant pump


All Audi gasoline straight-4 2.0 L CAEB engines	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Tighten cross-wise.
All Audi gasoline V6 3.2 L CALB engines	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
All Audi diesel V6 3.0 L CCWA engines	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Gradually tighten screws crosswise.
All Audi diesel V6 3.0 L CCWB engines	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Gradually tighten screws crosswise.
All Audi gasoline straight-4 2.0 L CDNB engines	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Tighten cross-wise.
All Audi gasoline straight-4 2.0 L CDNC engines	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Tighten cross-wise.
All Audi diesel V6 3.0 L CDUD engines	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
All Audi gasoline straight-4 2.0 L CHJA engines	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Gradually tighten screws crosswise.
All Audi gasoline straight-4 2.0 L CNCB engines	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Tighten cross-wise.
All Audi gasoline straight-4 2.0 L CNCD engines	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m

expand_moreAll Audi diesel straight-4 2.0 L CNHA engines


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace screws.
Second stage	45°45°45°


All Audi gasoline straight-4 2.0 L CPMA engines	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Tighten cross-wise.
All Audi gasoline straight-4 2.0 L CPMB engines	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
All Audi diesel V6 3.0 L CPNB engines	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Gradually tighten screws crosswise.
All Audi diesel V6 3.0 L CTBA engines	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
All Audi gasoline V6 3.0 L CTUC engines	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
All Audi gasoline V6 3.0 L CTVA engines	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
All other modifications	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m

expand_moreCoolant pump pulley


All Audi gasoline V6 3.2 L CALB engines	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
All Audi gasoline V6 3.0 L CTUC engines	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
All Audi gasoline V6 3.0 L CTVA engines	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
All other modifications	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m

expand_moreCoolant pump drive wheel


First stage	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Use new screw. (left-hand thread)
Second stage	90°90°90°

expand_moreCylinder head

expand_moreCamshaft bearing

expand_moreAll Audi diesel V6 3.0 L CDUD engines

Figure 2. Cylinder head, Camshaft bearing, Audi diesel V6 3.0 L CDUD.


First stage	Screw in screw(s) by hand.
See figure 2.
Second stage	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m

expand_moreAll Audi diesel straight-4 2.0 L CGLC engines


First stage	Screw in screw(s) by hand.
See figure 2.
Second stage	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m

expand_moreAll Audi gasoline straight-4 2.0 L CHJA engines

expand_moreBearing casing


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Tighten new screws in inside-to-outside order.
Second stage	90°90°90°

expand_moreAll Audi diesel straight-4 2.0 L CJCD engines


First stage	Screw in screw(s) by hand.
See figure 2.
Second stage	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m

expand_moreAll Audi gasoline straight-4 2.0 L CNCD engines

expand_moreBearing casing

Figure 3. Cylinder head, Camshaft bearing, Audi gasoline straight-4 2.0 L CNCD, Bearing casing.


First stage	Tighten bolt(s) until hand-tight.
Replace screws. See figure 3.
Second stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Third stage	90°90°90°

expand_moreAll Audi diesel straight-4 2.0 L CNHA engines

expand_moreBearing casing

Figure 4. Cylinder head, Camshaft bearing, Audi diesel straight-4 2.0 L CNHA, Bearing casing.


First stage	Tighten bolt(s) until hand-tight.
Note correct order of tensioning. See figure 4.
Second stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m

expand_moreAll Audi gasoline straight-4 2.0 L CPMB engines

expand_moreBearing casing

Figure 5. Cylinder head, Camshaft bearing, Audi gasoline straight-4 2.0 L CPMB, Bearing casing.


First stage	Tighten bolt(s) until hand-tight.
Replace screws. See figure 5.
Second stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Third stage	90°90°90°

expand_moreAll Audi diesel V6 3.0 L CTBA engines

Figure 6. Cylinder head, Camshaft bearing, Audi diesel V6 3.0 L CTBA.


First stage	Screw in screw(s) by hand.
See figure 6.
Second stage	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m

expand_moreAll Audi gasoline V6 3.0 L CTUC engines

Figure 7. Cylinder head, Camshaft bearing, Audi gasoline V6 3.0 L CTUC.


First stage	Screw in screw(s) by hand.
Replace screws. See figure 7.
Second stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Third stage	90°90°90°

expand_moreAll other modifications

Figure 8. Cylinder head, Camshaft bearing, All other modifications.


First stage	Tighten by hand
Note correct order of tensioning. See figure 8.
Second stage	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m

expand_moreCylinder head screws

expand_moreAll Audi diesel straight-4 2.0 L CAGA engines

expand_moreCAGA engine

Figure 9. Cylinder head, Cylinder head screws, Audi diesel straight-4 2.0 L CAGA, CAGA engine.


First stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Replace screws. See figure 9.
Second stage	44.25 lbf⋅ft44.25 lbf⋅ft60 N⋅m
Third stage	90°90°90°
Fourth stage	90°90°90°

expand_moreCJCA engine


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Replace screws. See figure 9.
Second stage	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
Third stage	90°90°90°
Fourth stage	90°90°90°

expand_moreAll Audi diesel straight-4 2.0 L CAGB engines

expand_moreCAGB engine


First stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Replace screws. See figure 9.
Second stage	44.25 lbf⋅ft44.25 lbf⋅ft60 N⋅m
Third stage	90°90°90°
Fourth stage	90°90°90°

expand_moreCJCB engine


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Replace screws. See figure 9.
Second stage	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
Third stage	90°90°90°
Fourth stage	90°90°90°

expand_moreAll Audi gasoline V6 3.2 L CALB engines

expand_moreScrews 1 – 7

Figure 10. Cylinder head, Cylinder head screws, Audi gasoline V6 3.2 L CALB, Screws 1 – 7.


First stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Replace screws. See figure 10.
Second stage	90°90°90°
Third stage	90°90°90°

expand_moreScrew 8


Fourth stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Replace screws.
Fifth stage	90°90°90°
Sixth stage	90°90°90°

expand_moreScrew 9


Seventh stage	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m

expand_moreAll Audi diesel V6 3.0 L CCWB engines

Figure 11. Cylinder head, Cylinder head screws, Audi diesel V6 3.0 L CCWB.


First stage	25.81 lbf⋅ft25.81 lbf⋅ft35 N⋅m
Replace screws. See figure 11.
Second stage	44.25 lbf⋅ft44.25 lbf⋅ft60 N⋅m
Third stage	90°90°90°
Fourth stage	90°90°90°

expand_moreAll Audi gasoline straight-4 2.0 L CDNB engines

expand_moreScrews 1 – 8

Figure 12. Cylinder head, Cylinder head screws, Audi gasoline straight-4 2.0 L CDNB, Screws 1 – 8.


First stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Replace screws. See figure 12.
Second stage	90°90°90°
Third stage	90°90°90°

expand_moreScrews 11 – 14

expand_moreFourth stage


First step	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Replace screws.
Second step	90°90°90°

expand_moreScrews 9 – 10


Fifth stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Replace screws.
Sixth stage	90°90°90°
Seventh stage	90°90°90°

expand_moreAll Audi gasoline straight-4 2.0 L CDNC engines

expand_moreScrews 1 – 8


First stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Replace screws. See figure 12.
Second stage	90°90°90°
Third stage	90°90°90°

expand_moreScrews 11 – 14

expand_moreFourth stage


First step	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Replace screws.
Second step	90°90°90°

expand_moreScrews 9 – 10


Fifth stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Replace screws.
Sixth stage	90°90°90°
Seventh stage	90°90°90°

expand_moreAll Audi diesel V6 3.0 L CDUD engines

Figure 13. Cylinder head, Cylinder head screws, Audi diesel V6 3.0 L CDUD.


First stage	Screw in screw(s) by hand.
Replace screws. See figure 13.
Second stage	25.81 lbf⋅ft25.81 lbf⋅ft35 N⋅m
Third stage	51.63 lbf⋅ft51.63 lbf⋅ft70 N⋅m
Fourth stage	90°90°90°
Fifth stage	90°90°90°

expand_moreAll Audi diesel straight-4 2.0 L CGLC engines

expand_moreScrews 1 – 10

Figure 14. Cylinder head, Cylinder head screws, Audi diesel straight-4 2.0 L CGLC, Screws 1 – 10.


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Replace screws. See figure 14.
Second stage	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
Third stage	90°90°90°
Fourth stage	90°90°90°

expand_moreAll Audi gasoline straight-4 2.0 L CHJA engines

expand_moreScrews 1 – 10

Figure 15. Cylinder head, Cylinder head screws, Audi gasoline straight-4 2.0 L CHJA, Screws 1 – 10.


First stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Replace screws. See figure 15.
Second stage	90°90°90°
Third stage	90°90°90°

expand_moreScrew 11


Fourth stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Replace screws.
Fifth stage	90°90°90°

expand_moreAll Audi diesel straight-4 2.0 L CJCD engines

expand_moreScrews 1 – 10

Figure 16. Cylinder head, Cylinder head screws, Audi diesel straight-4 2.0 L CJCD, Screws 1 – 10.


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Replace screws. See figure 16.
Second stage	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
Third stage	90°90°90°
Fourth stage	90°90°90°

expand_moreAll Audi gasoline straight-4 2.0 L CNCD engines

expand_moreScrews 1 – 10

Figure 17. Cylinder head, Cylinder head screws, Audi gasoline straight-4 2.0 L CNCD, Screws 1 – 10.


First stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Replace screws. See figure 17.
Second stage	90°90°90°
Third stage	90°90°90°

expand_moreScrew 11


Fourth stage	2.95 lbf⋅ft2.95 lbf⋅ft4 N⋅m
Replace screws.
Fifth stage	90°90°90°

expand_moreAll Audi diesel straight-4 2.0 L CNHA engines

Figure 18. Cylinder head, Cylinder head screws, Audi diesel straight-4 2.0 L CNHA.


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Replace screws. See figure 18.
Second stage	47.94 lbf⋅ft47.94 lbf⋅ft65 N⋅m
Third stage	90°90°90°
Fourth stage	90°90°90°

expand_moreAll Audi gasoline straight-4 2.0 L CPMB engines

expand_moreScrews 1 – 10

Figure 19. Cylinder head, Cylinder head screws, Audi gasoline straight-4 2.0 L CPMB, Screws 1 – 10.


First stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Replace screws. See figure 19.
Second stage	90°90°90°
Third stage	90°90°90°

expand_moreScrew 11


Fourth stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Replace screws.
Fifth stage	90°90°90°

expand_moreAll Audi diesel V6 3.0 L CTBA engines

Figure 20. Cylinder head, Cylinder head screws, Audi diesel V6 3.0 L CTBA.


First stage	Screw in screw(s) by hand.
Replace screws. See figure 20.
Second stage	25.81 lbf⋅ft25.81 lbf⋅ft35 N⋅m
Third stage	51.63 lbf⋅ft51.63 lbf⋅ft70 N⋅m
Fourth stage	90°90°90°
Fifth stage	90°90°90°

expand_moreAll Audi gasoline V6 3.0 L CTUC engines


First stage	Screw in screw(s) by hand.
Replace screws. See figure 20.
Second stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Third stage	90°90°90°
Fourth stage	90°90°90°

expand_moreAll other modifications

Figure 21. Cylinder head, Cylinder head screws, All other modifications.


First stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Replace screws. See figure 21.
Second stage	44.25 lbf⋅ft44.25 lbf⋅ft60 N⋅m
Third stage	90°90°90°
Fourth stage	90°90°90°

expand_moreCylinder head screws shank length (new)


All Audi diesel V6 3.0 L CCWA engines	6.26 in6.26 in159 mm
All Audi diesel V6 3.0 L CCWB engines	6.26 in6.26 in159 mm
All Audi diesel V6 3.0 L CPNB engines	6.26 in6.26 in159 mm
All other modifications	5.39 in5.39 in137 mm

expand_moreValve cover

expand_moreAll Audi diesel straight-4 2.0 L CAGA engines


First stage	Tighten by hand
Gradually tighten screws crosswise.

expand_moreCAGA engine


Second stage	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m

expand_moreCJCA engine


Second stage	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m

expand_moreAll Audi diesel straight-4 2.0 L CAGB engines


First stage	Tighten by hand
Gradually tighten screws crosswise.

expand_moreCAGB engine


Second stage	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m

expand_moreCJCB engine


Second stage	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m

expand_moreAll Audi diesel straight-4 2.0 L CAHB engines


First stage	Tighten by hand
Tighten cross-wise.
Second stage	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m

expand_moreAll Audi gasoline straight-4 2.0 L CDNB engines

expand_moreAt the cylinder head

expand_moreBearing casing


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Tighten new screws in inside-to-outside order.
Second stage	90°90°90°

expand_moreAll Audi gasoline straight-4 2.0 L CDNC engines

expand_moreAt the cylinder head

expand_moreBearing casing


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Tighten new screws in inside-to-outside order.
Second stage	90°90°90°

expand_moreAll Audi diesel V6 3.0 L CDUD engines

Figure 22. Cylinder head, Valve cover, Audi diesel V6 3.0 L CDUD.


First stage	Screw in screw(s) by hand.
Replace screws. See figure 22.
Second stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Third stage	90°90°90°

expand_moreAll Audi gasoline straight-4 2.0 L CHJA engines

expand_moreBearing casing


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Tighten new screws in inside-to-outside order.
Second stage	90°90°90°

expand_moreAll Audi diesel V6 3.0 L CTBA engines


First stage	Screw in screw(s) by hand.
Replace screws. See figure 22.
Second stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Third stage	90°90°90°


All other modifications	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Tighten gradually and alternately from inside to outside.


Valve cover locking screws	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m

expand_moreEngine block

expand_moreBalance shaft gear wheel

expand_moreAll Audi gasoline V6 3.2 L CALB engines


First stage	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m
Replace screws.
Second stage	90°90°90°


All Audi diesel V6 3.0 L CCWA engines	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m
All Audi diesel V6 3.0 L CCWB engines	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m

expand_moreAll Audi gasoline straight-4 2.0 L CDNB engines

expand_moreCoolant pump


First stage	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Use new screw. (left-hand thread)
Second stage	90°90°90°


On the engine block	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m

expand_moreAll Audi gasoline straight-4 2.0 L CDNC engines

expand_moreCoolant pump


First stage	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Use new screw. (left-hand thread)
Second stage	90°90°90°


On the engine block	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m

expand_moreAll Audi diesel V6 3.0 L CDUD engines


Central screws	44.25 lbf⋅ft44.25 lbf⋅ft60 N⋅m

expand_moreCentral nuts


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Shaft must be replaced when the screw connection has been loosened.
Second stage	90°90°90°


Wheel	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m

expand_moreAll Audi diesel straight-4 2.0 L CGLC engines


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll Audi gasoline straight-4 2.0 L CHJA engines


Bearing casing	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m

expand_moreAll Audi diesel straight-4 2.0 L CJCD engines


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll Audi gasoline straight-4 2.0 L CNCD engines

expand_moreBearing casing


First stage	2.95 lbf⋅ft2.95 lbf⋅ft4 N⋅m
Replace screws.
Second stage	45°45°45°

expand_moreAll Audi gasoline straight-4 2.0 L CPMB engines


Bearing casing	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Replace screws.


All Audi diesel V6 3.0 L CPNB engines	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m

expand_moreAll Audi diesel V6 3.0 L CTBA engines


Central screws	44.25 lbf⋅ft44.25 lbf⋅ft60 N⋅m

expand_moreCentral nuts


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Shaft must be replaced when the screw connection has been loosened.
Second stage	90°90°90°


Wheel	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m

expand_moreAll Audi gasoline V6 3.0 L CTUC engines


Central screws	44.25 lbf⋅ft44.25 lbf⋅ft60 N⋅m

expand_moreWheel


First stage	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll other modifications

expand_moreBalance shaft module


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreBalance shaft module

expand_moreScrews 1 – 4


Third stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreScrews 1 – 6

Figure 23. Engine block, Balance shaft module, Screws 1 – 6.


First stage	Screw in screw(s) finger tight.
Replace screws. See figure 23.
Second stage	4.43 lbf⋅ft4.43 lbf⋅ft6 N⋅m
Fifth stage	90°90°90°

expand_moreScrews 5 – 6


Fourth stage	9.59 lbf⋅ft9.59 lbf⋅ft13 N⋅m

expand_moreConnecting rod bearing

expand_moreAll Audi diesel V6 3.0 L CCWB engines


First stage	25.81 lbf⋅ft25.81 lbf⋅ft35 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll Audi gasoline straight-4 2.0 L CDNB engines


First stage	33.19 lbf⋅ft33.19 lbf⋅ft45 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll Audi gasoline straight-4 2.0 L CDNC engines


First stage	33.19 lbf⋅ft33.19 lbf⋅ft45 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll Audi diesel V6 3.0 L CDUD engines


First stage	25.81 lbf⋅ft25.81 lbf⋅ft35 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll Audi gasoline straight-4 2.0 L CHJA engines


First stage	33.19 lbf⋅ft33.19 lbf⋅ft45 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll Audi gasoline straight-4 2.0 L CNCD engines


First stage	33.19 lbf⋅ft33.19 lbf⋅ft45 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll Audi gasoline straight-4 2.0 L CPMB engines


First stage	33.19 lbf⋅ft33.19 lbf⋅ft45 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll Audi diesel V6 3.0 L CTBA engines


First stage	25.81 lbf⋅ft25.81 lbf⋅ft35 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll Audi gasoline V6 3.0 L CTUC engines


First stage	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll other modifications


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreCrankshaft central screws

expand_moreAll Audi gasoline straight-4 2.0 L CDNB engines


First stage	110.63 lbf⋅ft110.63 lbf⋅ft150 N⋅m
Replace screws and oil sealing rings.
Second stage	90°90°90°

expand_moreAll Audi gasoline straight-4 2.0 L CDNC engines


First stage	110.63 lbf⋅ft110.63 lbf⋅ft150 N⋅m
Use new screw.
Second stage	90°90°90°

expand_moreAll Audi gasoline straight-4 2.0 L CHJA engines


First stage	110.63 lbf⋅ft110.63 lbf⋅ft150 N⋅m
Replace screws and oil sealing rings.
Second stage	90°90°90°

expand_moreAll Audi diesel straight-4 2.0 L CJCD engines


First stage	132.76 lbf⋅ft132.76 lbf⋅ft180 N⋅m
Use new screws.
Second stage	90°90°90°
Third stage	45°45°45°

expand_moreAll Audi gasoline straight-4 2.0 L CNCD engines


First stage	110.63 lbf⋅ft110.63 lbf⋅ft150 N⋅m
Replace screws and oil sealing rings.
Second stage	90°90°90°

expand_moreAll Audi diesel straight-4 2.0 L CNHA engines


First stage	132.76 lbf⋅ft132.76 lbf⋅ft180 N⋅m
Replace screws.
Second stage	90°90°90°
Oil screw head support and thread.
Third stage	45°45°45°

expand_moreAll Audi gasoline straight-4 2.0 L CPMB engines


First stage	110.63 lbf⋅ft110.63 lbf⋅ft150 N⋅m
Replace screws and oil sealing rings.
Second stage	90°90°90°

expand_moreAll other modifications


First stage	132.76 lbf⋅ft132.76 lbf⋅ft180 N⋅m
Use new screw.
Second stage	90°90°90°
Third stage	45°45°45°

expand_moreDrive plate

expand_moreOn crankshaft


First stage	44.25 lbf⋅ft44.25 lbf⋅ft60 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreEngine block closure screws


All Audi gasoline V6 3.0 L CTUC engines	10.33 lbf⋅ft10.33 lbf⋅ft14 N⋅m
Replace sealing rings.
All Audi gasoline V6 3.0 L CTVA engines	10.33 lbf⋅ft10.33 lbf⋅ft14 N⋅m
Replace sealing rings.
All other modifications	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m

expand_moreFlywheel


To drive plate	44.25 lbf⋅ft44.25 lbf⋅ft60 N⋅m
Use new screws.

expand_moreMain bearing

expand_moreAll Audi diesel straight-4 2.0 L CAGB engines

expand_moreBalance shaft module


First stage	4.43 lbf⋅ft4.43 lbf⋅ft6 N⋅m
Replace screws.

expand_moreM7

expand_moreSecond stage


First step	9.59 lbf⋅ft9.59 lbf⋅ft13 N⋅m
Second step	90°90°90°

expand_moreM8

expand_moreSecond stage


First step	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Second step	90°90°90°

expand_moreBearing cap


First stage	47.94 lbf⋅ft47.94 lbf⋅ft65 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll Audi diesel V6 3.0 L CCWA engines

Figure 24. Engine block, Main bearing, Audi diesel V6 3.0 L CCWA.


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Replace screws. See figure 24.
Second stage	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
Third stage	180°180°180°

expand_moreAll Audi gasoline straight-4 2.0 L CDNB engines

expand_moreCenter

expand_moreScrews


First stage	47.94 lbf⋅ft47.94 lbf⋅ft65 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreLateral-fitting screw


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll Audi gasoline straight-4 2.0 L CDNC engines

expand_moreM10


First stage	Tighten by hand
Replace screws.
Second stage	47.94 lbf⋅ft47.94 lbf⋅ft65 N⋅m
Third stage	90°90°90°

expand_moreLateral-fitting (M8)


Fourth stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace screws.
Fifth stage	90°90°90°

expand_moreAll Audi diesel V6 3.0 L CDUD engines


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Replace screws. See figure 24.
Second stage	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
Third stage	180°180°180°

expand_moreAll Audi diesel straight-4 2.0 L CGLC engines


First stage	47.94 lbf⋅ft47.94 lbf⋅ft65 N⋅m
Replace screws.
Second stage	60°60°60°

expand_moreAll Audi gasoline straight-4 2.0 L CHJA engines

expand_moreScrews M8 and M10


First stage	Tighten by hand
Replace screws.

expand_moreScrews (M10)


Second stage	47.94 lbf⋅ft47.94 lbf⋅ft65 N⋅m
Third stage	90°90°90°

expand_moreScrews (M8)


Fourth stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Fifth stage	90°90°90°

expand_moreAll Audi diesel straight-4 2.0 L CJCD engines


First stage	47.94 lbf⋅ft47.94 lbf⋅ft65 N⋅m
Replace screws.
Second stage	60°60°60°

expand_moreAll Audi gasoline straight-4 2.0 L CNCD engines

expand_moreScrews 1 – 11

Figure 25. Engine block, Main bearing, Audi gasoline straight-4 2.0 L CNCD, Screws 1 – 11.


First stage	Screw in screw(s) by hand.
Replace screws. See figure 25.

expand_moreScrews 1 – 10


Second stage	47.94 lbf⋅ft47.94 lbf⋅ft65 N⋅m
Third stage	90°90°90°

expand_moreScrew 11


Fourth stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Fifth stage	90°90°90°


All Audi diesel straight-4 2.0 L CNHA engines	Component must not be knocked down.

expand_moreAll Audi gasoline straight-4 2.0 L CPMB engines

expand_moreScrews 1 – 11


First stage	Screw in screw(s) by hand.
Replace screws. See figure 25.

expand_moreScrews 1 – 10


Second stage	47.94 lbf⋅ft47.94 lbf⋅ft65 N⋅m
Third stage	90°90°90°

expand_moreScrew 11


Fourth stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Fifth stage	90°90°90°

expand_moreAll Audi diesel V6 3.0 L CTBA engines

Figure 26. Engine block, Main bearing, Audi diesel V6 3.0 L CTBA.


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Replace screws. See figure 26.
Second stage	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
Third stage	180°180°180°

expand_moreAll Audi gasoline V6 3.0 L CTUC engines

expand_moreScrews 1 – 16


First stage	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreScrews 17 – 31


Third stage	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m

expand_moreAll other modifications


First stage	47.94 lbf⋅ft47.94 lbf⋅ft65 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreVibration damper

expand_moreAll Audi diesel V6 3.0 L CCWB engines


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll Audi diesel V6 3.0 L CDUD engines


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll Audi diesel V6 3.0 L CTBA engines


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll other modifications


First stage	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreEngine control


Balance shaft timing chain guide rail	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Balance shaft timing chain tension rail	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreBottom part of the control unit housing

expand_moreAll Audi diesel V6 3.0 L CDUD engines

expand_moreScrews 1 – 4

Figure 27. Engine control, Bottom part of the control unit housing, Audi diesel V6 3.0 L CDUD, Screws 1 – 4.


First stage	Screw in screw(s) by hand.
See figure 27.
Second stage	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m

expand_moreScrews 5 – 10


Fifth stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m

expand_moreScrews 5 – 24


Third stage	2.21 lbf⋅ft2.21 lbf⋅ft3 N⋅m
Replace screws.
Fourth stage	2.21 lbf⋅ft2.21 lbf⋅ft3 N⋅m
Sixth stage	90°90°90°

expand_moreAll Audi gasoline straight-4 2.0 L CHJA engines

Figure 28. Engine control, Bottom part of the control unit housing, Audi gasoline straight-4 2.0 L CHJA.

expand_moreVariant 1
See figure 28.


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Replace screws.
Second stage	45°45°45°

Figure 29. Engine control, Bottom part of the control unit housing, Audi gasoline straight-4 2.0 L CHJA.

expand_moreVariant 2
See figure 29.


First stage	2.95 lbf⋅ft2.95 lbf⋅ft4 N⋅m
Replace screws.
Second stage	45°45°45°

expand_moreAll Audi gasoline straight-4 2.0 L CNCD engines

expand_moreScrews 1 – 8


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Replace screws. See figure 29.
Second stage	45°45°45°

expand_moreAll Audi gasoline straight-4 2.0 L CPMB engines

expand_moreScrews 1 – 15

Figure 30. Engine control, Bottom part of the control unit housing, Audi gasoline straight-4 2.0 L CPMB, Screws 1 – 15.


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Replace screws. See figure 30.
Second stage	45°45°45°

expand_moreScrews 1 – 8

Figure 31. Engine control, Bottom part of the control unit housing, Audi gasoline straight-4 2.0 L CPMB, Screws 1 – 8.


First stage	2.95 lbf⋅ft2.95 lbf⋅ft4 N⋅m
Replace screws. See figure 31.
Second stage	45°45°45°

expand_moreAll Audi diesel V6 3.0 L CTBA engines

expand_moreScrews 1 – 4

Figure 32. Engine control, Bottom part of the control unit housing, Audi diesel V6 3.0 L CTBA, Screws 1 – 4.


First stage	Screw in screw(s) by hand.
See figure 32.
Second stage	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m

expand_moreScrews 5 – 24


Third stage	2.21 lbf⋅ft2.21 lbf⋅ft3 N⋅m
Replace screws.
Fourth stage	2.21 lbf⋅ft2.21 lbf⋅ft3 N⋅m
Sixth stage	90°90°90°

expand_moreScrews 5 – 10


Fifth stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m

expand_moreAll Audi gasoline V6 3.0 L CTUC engines

expand_moreScrew 1

Figure 33. Engine control, Bottom part of the control unit housing, Audi gasoline V6 3.0 L CTUC, Screw 1.


First stage	2.21 lbf⋅ft2.21 lbf⋅ft3 N⋅m
See figure 33.
Fourth stage	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m

expand_moreScrews 2 – 11


Second stage	2.21 lbf⋅ft2.21 lbf⋅ft3 N⋅m
Use new screws and tighten them crosswise.

expand_moreScrews 2, 3, 5, 6, and 8


Third stage	90°90°90°

expand_moreScrews 9, 10, and 11


Fifth stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Sixth stage	90°90°90°

expand_moreScrew 4


Seventh stage	11.8 lbf⋅ft11.8 lbf⋅ft16 N⋅m

expand_moreScrew 7


Eighth stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Ninth stage	180°180°180°

expand_moreAll other modifications


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Use new screws and tighten them crosswise.
Second stage	45°45°45°

expand_moreCamshaft adjuster

expand_moreAll Audi gasoline straight-4 2.0 L CHJA engines

expand_moreBearing casing


M6	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m

expand_moreInlet camshaft


Central screws	25.81 lbf⋅ft25.81 lbf⋅ft35 N⋅m
Left-hand thread

expand_moreM6


Cap	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m

expand_moreOutlet camshaft

expand_moreCentral screws


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Use new screw.
Second stage	90°90°90°

expand_moreAll Audi gasoline straight-4 2.0 L CNCD engines

expand_moreBearing casing


First stage	2.95 lbf⋅ft2.95 lbf⋅ft4 N⋅m
Replace screws.
Second stage	180°180°180°

expand_moreCamshaft adjuster valve


First stage	2.95 lbf⋅ft2.95 lbf⋅ft4 N⋅m
Replace screws.
Second stage	45°45°45°

expand_moreInlet camshaft


Central screws	25.81 lbf⋅ft25.81 lbf⋅ft35 N⋅m
Left-hand thread

expand_moreOutlet camshaft


Central screws	25.81 lbf⋅ft25.81 lbf⋅ft35 N⋅m
Left-hand thread

expand_moreAll Audi diesel straight-4 2.0 L CNHA engines


Camshaft adjuster valve	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Cap	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Central screws	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m

expand_moreAll Audi gasoline straight-4 2.0 L CPMB engines


Bearing casing	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Camshaft adjuster valve	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m

expand_moreInlet camshaft


Central screws	25.81 lbf⋅ft25.81 lbf⋅ft35 N⋅m
Use new screw. (left-hand thread)

expand_moreOutlet camshaft central screws


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Use new screw.
Second stage	90°90°90°

expand_moreAll other modifications


Bearing casing	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Cap	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Central screws	25.81 lbf⋅ft25.81 lbf⋅ft35 N⋅m
Left-hand thread

expand_moreCamshaft drive belt deflection pulley

expand_moreAll Audi diesel straight-4 2.0 L CAGB engines

expand_moreM10


First stage	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
Use new screw.
Second stage	90°90°90°


M8	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreAll Audi diesel straight-4 2.0 L CGLC engines

expand_moreScrews (M10)


First stage	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
Use new screw.
Second stage	90°90°90°

expand_moreM8


Nuts	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Screws	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Stud screws	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m

expand_moreAll Audi diesel straight-4 2.0 L CJCD engines

expand_moreScrews (M10)


First stage	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
Use new screw.
Second stage	90°90°90°

expand_moreM8


Nuts	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Screws	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Stud screws	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m


All Audi diesel straight-4 2.0 L CNHA engines	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreAll other modifications

expand_moreM10


First stage	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
Replace screws.
Second stage	90°90°90°


M8	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m


Camshaft timing chain guide rail	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreCamshaft timing chain slip rail

expand_moreAll Audi diesel V6 3.0 L CDUD engines


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll Audi diesel V6 3.0 L CTBA engines


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Replace screws.
Second stage	90°90°90°


All other modifications	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreCamshaft timing chain tensioner

expand_moreAll Audi diesel V6 3.0 L CCWB engines


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll Audi diesel V6 3.0 L CDUD engines


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll Audi gasoline straight-4 2.0 L CNCD engines


First stage	2.95 lbf⋅ft2.95 lbf⋅ft4 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll Audi diesel V6 3.0 L CTBA engines


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll Audi gasoline V6 3.0 L CTUC engines


First cylinder row	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Second cylinder row	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m


All other modifications	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m

expand_moreCamshaft timing chain tensioning rail

expand_moreAll Audi diesel V6 3.0 L CCWB engines


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Replace screws.
Second stage	90°90°90°


All Audi diesel V6 3.0 L CDUD engines	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m
All Audi diesel V6 3.0 L CTBA engines	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m
All other modifications	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreCamshaft timing gear

expand_moreAll Audi diesel straight-4 2.0 L CAGA engines


Central screws	73.76 lbf⋅ft73.76 lbf⋅ft100 N⋅m

expand_moreCAGA engine

expand_moreWheel


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace screws.
Second stage	45°45°45°

expand_moreCJCA engine


Wheel	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m

expand_moreAll Audi diesel straight-4 2.0 L CAGB engines


Central screws	73.76 lbf⋅ft73.76 lbf⋅ft100 N⋅m

expand_moreCAGB engine

expand_moreWheel


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace screws.
Second stage	45°45°45°

expand_moreCJCB engine


Wheel	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m

expand_moreAll Audi diesel straight-4 2.0 L CAHA engines


Central screws	73.76 lbf⋅ft73.76 lbf⋅ft100 N⋅m

expand_moreWheel


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace bolts.
Second stage	45°45°45°

expand_moreAll Audi diesel straight-4 2.0 L CAHB engines


Central screws	73.76 lbf⋅ft73.76 lbf⋅ft100 N⋅m

expand_moreWheel


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Second stage	45°45°45°

expand_moreAll Audi diesel V6 3.0 L CCWB engines


Inlet camshaft	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m


All Audi diesel V6 3.0 L CDUD engines	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m

expand_moreAll Audi diesel straight-4 2.0 L CNHA engines


Central screws	73.76 lbf⋅ft73.76 lbf⋅ft100 N⋅m
Clamping screws	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m


All Audi diesel V6 3.0 L CTBA engines	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m

expand_moreAll other modifications


Central screws	73.76 lbf⋅ft73.76 lbf⋅ft100 N⋅m
Wheel	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m

expand_moreControl drive chain tensioner


All Audi gasoline V6 3.2 L CALB engines	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
All Audi diesel V6 3.0 L CCWA engines	8.85 lbf⋅ft8.85 lbf⋅ft12 N⋅m
All Audi diesel V6 3.0 L CCWB engines	8.85 lbf⋅ft8.85 lbf⋅ft12 N⋅m
All Audi diesel V6 3.0 L CPNB engines	8.85 lbf⋅ft8.85 lbf⋅ft12 N⋅m
All Audi gasoline V6 3.0 L CTUC engines	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
All Audi gasoline V6 3.0 L CTVA engines	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
All other modifications	47.94 lbf⋅ft47.94 lbf⋅ft65 N⋅m

expand_moreControl drive chain tensioning rail


All Audi diesel V6 3.0 L CCWA engines	8.85 lbf⋅ft8.85 lbf⋅ft12 N⋅m
Replace screws.
All Audi diesel V6 3.0 L CCWB engines	8.85 lbf⋅ft8.85 lbf⋅ft12 N⋅m
Replace screws.
All Audi diesel V6 3.0 L CPNB engines	8.85 lbf⋅ft8.85 lbf⋅ft12 N⋅m
Replace screws.
All other modifications	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreControl drive sprocket wheel

expand_moreAll Audi gasoline V6 3.2 L CALB engines

expand_moreM10


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Use new screw.
Second stage	90°90°90°

expand_moreM8


First stage	4.43 lbf⋅ft4.43 lbf⋅ft6 N⋅m
Use new screw.
Second stage	60°60°60°

expand_moreAll Audi diesel V6 3.0 L CCWB engines


M10	33.19 lbf⋅ft33.19 lbf⋅ft45 N⋅m

expand_moreM6


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Use new screw.
Second stage	90°90°90°

expand_moreControl drive timing chain slip rail

expand_moreAll Audi gasoline V6 3.2 L CALB engines


First stage	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll Audi diesel V6 3.0 L CCWB engines


Bottom	8.85 lbf⋅ft8.85 lbf⋅ft12 N⋅m
Use screw-locking compound.

expand_moreTop


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll Audi gasoline V6 3.0 L CTUC engines


First stage	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Replace screws.
Second stage	90°90°90°


All other modifications	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreDrive chain balance shaft tensioner

expand_moreAll Audi gasoline V6 3.2 L CALB engines


First stage	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Replace screws.
Second stage	45°45°45°


All Audi diesel V6 3.0 L CCWA engines	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
All Audi diesel V6 3.0 L CCWB engines	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
All Audi diesel V6 3.0 L CPNB engines	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
All other modifications	62.69 lbf⋅ft62.69 lbf⋅ft85 N⋅m


High-pressure pump tension roller	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m
Injection pump drive belt tensioning roller	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m

expand_moreInlet camshaft wheel

expand_moreAll Audi gasoline V6 3.2 L CALB engines


First stage	59 lbf⋅ft59 lbf⋅ft80 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll Audi gasoline V6 3.0 L CTUC engines


First stage	59 lbf⋅ft59 lbf⋅ft80 N⋅m
Replace screws.
Second stage	90°90°90°


All other modifications	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m

expand_moreIntermediate shaft chain sprocket

expand_moreAll Audi gasoline straight-4 2.0 L CDNB engines


First stage	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Replace the screws and sprocket wheel.
Second stage	for freedom from play

expand_moreThird stage


First step	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Second step	90°90°90°

expand_moreAll Audi gasoline straight-4 2.0 L CDNC engines


First stage	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Replace the screws and sprocket wheel.
Second stage	for freedom from play

expand_moreThird stage


First step	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Second step	90°90°90°

expand_moreAll Audi diesel straight-4 2.0 L CGLC engines


First stage	66.38 lbf⋅ft66.38 lbf⋅ft90 N⋅m
Replace screw and intermediate wheel when loosening the screw.
Second stage	90°90°90°

expand_moreAll Audi gasoline straight-4 2.0 L CHJA engines


First stage	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Replace screw and intermediate wheel when loosening the screw.
Second stage	for freedom from play

expand_moreThird stage


First step	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Second step	90°90°90°

expand_moreAll Audi diesel straight-4 2.0 L CJCD engines


First stage	66.38 lbf⋅ft66.38 lbf⋅ft90 N⋅m
Replace screw and intermediate wheel when loosening the screw.
Second stage	90°90°90°

expand_moreAll Audi gasoline straight-4 2.0 L CNCD engines


First stage	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Replace screw and intermediate wheel when loosening the screw.
Second stage	for freedom from play
Third stage	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Fourth stage	90°90°90°

expand_moreAll Audi gasoline straight-4 2.0 L CPMB engines


First stage	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Replace screw and intermediate wheel when loosening the screw.
Second stage	for freedom from play
Third stage	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Fourth stage	90°90°90°

expand_moreAll Audi gasoline V6 3.0 L CTUC engines

expand_moreFirst cylinder row


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreSecond cylinder row


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreBearing pedestal second cylinder row


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Replace screws.
Second stage	45°45°45°

expand_moreAll other modifications

expand_moreBalance shaft module


First stage	66.38 lbf⋅ft66.38 lbf⋅ft90 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreOil pump camshaft timing chain guide rail


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreOil pump drive chain tensioner

expand_moreAll Audi diesel V6 3.0 L CDUD engines


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll Audi diesel V6 3.0 L CTBA engines


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll Audi gasoline V6 3.0 L CTUC engines


First stage	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Replace screws.
Second stage	45°45°45°


All other modifications	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m

expand_moreOutlet camshaft wheel

expand_moreAll Audi gasoline V6 3.2 L CALB engines


First stage	59 lbf⋅ft59 lbf⋅ft80 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll Audi gasoline V6 3.0 L CTUC engines


First stage	59 lbf⋅ft59 lbf⋅ft80 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll other modifications

expand_moreCentral screws


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreTension rail bearing screws


All Audi diesel V6 3.0 L CCWA engines	8.85 lbf⋅ft8.85 lbf⋅ft12 N⋅m
All Audi diesel V6 3.0 L CCWB engines	8.85 lbf⋅ft8.85 lbf⋅ft12 N⋅m
All Audi diesel V6 3.0 L CDUD engines	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m
All Audi diesel V6 3.0 L CPNB engines	8.85 lbf⋅ft8.85 lbf⋅ft12 N⋅m

expand_moreTiming case cover first cylinder row

expand_moreAll Audi gasoline V6 3.2 L CALB engines


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll Audi diesel V6 3.0 L CDUD engines


First stage	Screw in screw(s) by hand.
Replace screws.
Second stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Third stage	90°90°90°

expand_moreAll Audi diesel V6 3.0 L CTBA engines


First stage	Screw in screw(s) by hand.
Replace screws.
Second stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Third stage	90°90°90°

expand_moreAll Audi gasoline V6 3.0 L CTUC engines


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll other modifications

expand_moreM6 × 20 screws


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Replace bolts and tighten crosswise.
Third stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Fourth stage	90°90°90°

expand_moreM6 × 30 screws


Second stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m

expand_moreTiming case cover second cylinder row

expand_moreAll Audi gasoline V6 3.2 L CALB engines


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll Audi diesel V6 3.0 L CDUD engines


First stage	Screw in screw(s) by hand.
Replace screws.
Second stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Third stage	90°90°90°

expand_moreAll Audi diesel V6 3.0 L CTBA engines


First stage	Screw in screw(s) by hand.
Replace screws.
Second stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Third stage	90°90°90°

expand_moreAll Audi gasoline V6 3.0 L CTUC engines


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll other modifications

expand_moreM6 × 20 screws


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Replace bolts and tighten crosswise.
Third stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Fourth stage	90°90°90°

expand_moreM6 × 30 screws


Second stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m

expand_moreToothed belt guard


Coolant pump	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m


Toothed belt guard at the bottom	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Toothed belt guard center	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m

expand_moreToothed belt tensioning roller


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace nuts.
Second stage	45°45°45°


Top part of control unit housing	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Tighten cross-wise.

expand_moreEngine lubrication

expand_moreOil cooler

expand_moreAll Audi diesel straight-4 2.0 L CAGA engines


CAGA engine	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
CJCA engine	8.11 lbf⋅ft8.11 lbf⋅ft11 N⋅m

expand_moreAll Audi diesel straight-4 2.0 L CAGB engines


CAGB engine	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
CJCB engine	8.11 lbf⋅ft8.11 lbf⋅ft11 N⋅m


All Audi gasoline V6 3.2 L CALB engines	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
All Audi diesel V6 3.0 L CCWA engines	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
All Audi diesel V6 3.0 L CCWB engines	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m

expand_moreAll Audi gasoline straight-4 2.0 L CDNB engines


Heat-exchanger on oil filter housing	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m


All Audi diesel straight-4 2.0 L CGLC engines	8.11 lbf⋅ft8.11 lbf⋅ft11 N⋅m
Replace sealing rings.
All Audi diesel straight-4 2.0 L CJCD engines	8.11 lbf⋅ft8.11 lbf⋅ft11 N⋅m
Replace sealing rings.
All Audi diesel straight-4 2.0 L CMGB engines	8.11 lbf⋅ft8.11 lbf⋅ft11 N⋅m
Replace sealing rings.

expand_moreAll Audi gasoline straight-4 2.0 L CNCD engines


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Replace screws.
Second stage	45°45°45°


All Audi diesel V6 3.0 L CPNB engines	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
All Audi diesel straight-4 2.0 L CSUA engines	8.11 lbf⋅ft8.11 lbf⋅ft11 N⋅m
Replace sealing rings.

expand_moreAll Audi gasoline V6 3.0 L CTUC engines


First stage	2.21 lbf⋅ft2.21 lbf⋅ft3 N⋅m
Replace screws.
Second stage	90°90°90°


All other modifications	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m

expand_moreOil drain plug

expand_moreAll Audi gasoline straight-4 2.0 L CNCD engines


Plastic oil sump	Tighten screw up to the stop.
Replace sealing rings.
Sheet-steel sump	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Replace sealing rings.


All other modifications	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Replace sealing rings.

expand_moreOil filter housing

expand_moreAll Audi diesel straight-4 2.0 L CAGA engines

expand_moreCAGA engine

expand_moreOn the engine block


First stage	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m
Use new screws and tighten them crosswise.
Second stage	90°90°90°

expand_moreCJCA engine

expand_moreOn the engine block


First stage	10.33 lbf⋅ft10.33 lbf⋅ft14 N⋅m
Use new screws and tighten them crosswise.
Second stage	90°90°90°


Oil filter cover	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m

expand_moreAll Audi diesel straight-4 2.0 L CAGB engines

expand_moreCAGB engine

expand_moreOn the engine block


First stage	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m
Use new screws and tighten them crosswise.
Second stage	90°90°90°

expand_moreCJCB engine

expand_moreOn the engine block


First stage	10.33 lbf⋅ft10.33 lbf⋅ft14 N⋅m
Use new screws and tighten them crosswise.
Second stage	90°90°90°


Oil filter cover	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m

expand_moreAll Audi gasoline V6 3.2 L CALB engines


Cap	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m

expand_moreAll Audi diesel V6 3.0 L CCWB engines


Cap	25.81 lbf⋅ft25.81 lbf⋅ft35 N⋅m
Otherwise	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m

expand_moreAll Audi diesel V6 3.0 L CDUD engines


Oil filter cover	25.81 lbf⋅ft25.81 lbf⋅ft35 N⋅m
Replace sealing rings.
On timing case cover	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Replace sealing rings.

expand_moreAll Audi diesel straight-4 2.0 L CGLC engines


Oil filter cover	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Replace sealing rings.

expand_moreOn the engine block


First stage	10.33 lbf⋅ft10.33 lbf⋅ft14 N⋅m
Replace sealing rings.
Second stage	90°90°90°

expand_moreAll Audi gasoline straight-4 2.0 L CHJA engines


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Use new screws and tighten them crosswise.
Second stage	90°90°90°

expand_moreAll Audi diesel straight-4 2.0 L CJCD engines


Oil filter cover	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Replace sealing rings.

expand_moreOn the engine block


First stage	10.33 lbf⋅ft10.33 lbf⋅ft14 N⋅m
Replace sealing rings.
Second stage	90°90°90°

expand_moreAll Audi gasoline straight-4 2.0 L CNCD engines


Oil filter cover	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Replace sealing rings.

expand_moreAll Audi diesel straight-4 2.0 L CNHA engines


Oil filter cover	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Replace sealing rings.

expand_moreOn the engine block

Figure 34. Engine lubrication, Oil filter housing, Audi diesel straight-4 2.0 L CNHA, On the engine block.


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace screws. See figure 34.
Second stage	90°90°90°

expand_moreAll Audi diesel V6 3.0 L CTBA engines


Oil filter cover	25.81 lbf⋅ft25.81 lbf⋅ft35 N⋅m
Replace sealing rings.
On timing case cover	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Replace sealing rings.

expand_moreAll Audi gasoline V6 3.0 L CTUC engines


Oil filter cover	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Replace sealing rings.
On the engine block	9.59 lbf⋅ft9.59 lbf⋅ft13 N⋅m
Replace sealing rings.

expand_moreAll other modifications


Cap	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m

expand_moreOn the engine block


First stage	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m
Replace screws.
Second stage	90°90°90°
Tighten alternately starting from the top left


Oil pressure sensor	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreOil pump

expand_moreAll Audi diesel straight-4 2.0 L CAGA engines


CAGB engine	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
CJCA engine	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m

expand_moreAll Audi diesel straight-4 2.0 L CAGB engines


CAGB engine	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
CJCB engine	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m

expand_moreAll Audi diesel V6 3.0 L CDUD engines


First stage	Screw in screw(s) by hand
Replace screws.
Second stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Third stage	90°90°90°


All Audi diesel straight-4 2.0 L CGLC engines	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
All Audi diesel straight-4 2.0 L CJCD engines	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
All Audi diesel straight-4 2.0 L CMGB engines	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m

expand_moreAll Audi gasoline straight-4 2.0 L CNCD engines


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll Audi diesel straight-4 2.0 L CNHA engines


First stage	8.85 lbf⋅ft8.85 lbf⋅ft12 N⋅m
Replace screws.
Second stage	180°180°180°


All Audi diesel straight-4 2.0 L CSUA engines	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m

expand_moreAll Audi diesel V6 3.0 L CTBA engines


First stage	Screw in screw(s) by hand
Replace screws.
Second stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Third stage	90°90°90°


All other modifications	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreOil pump chain wheel

expand_moreAll Audi gasoline V6 3.2 L CALB engines


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll Audi diesel V6 3.0 L CDUD engines


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Replace screws.
Second stage	45°45°45°

expand_moreAll Audi diesel V6 3.0 L CTBA engines


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Replace screws.
Second stage	45°45°45°

expand_moreAll Audi gasoline V6 3.0 L CTUC engines


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Replace screws.
Second stage	90°90°90°


All other modifications	44.25 lbf⋅ft44.25 lbf⋅ft60 N⋅m

expand_moreOil sump

expand_moreAll Audi diesel straight-4 2.0 L CAGB engines

expand_moreAt the gearbox


First stage	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m
Replace screws.
Second stage	90°90°90°


M10	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
M7	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m
Gradually tighten screws crosswise.

expand_moreAll Audi gasoline V6 3.2 L CALB engines

expand_moreOil sump lower part


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Tighten cross-wise.
Second stage	90°90°90°
Replace screws.

expand_moreOil sump top part


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Tighten cross-wise.
Second stage	11.8 lbf⋅ft11.8 lbf⋅ft16 N⋅m

expand_moreAll Audi diesel V6 3.0 L CCWB engines

expand_moreAt the gearbox

expand_moreOil sump top part


First stage	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreOil sump lower part


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Replace bolts and tighten crosswise.
Second stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Third stage	90°90°90°

expand_moreOil sump top part on the engine block


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Second stage	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m

expand_moreAll Audi gasoline straight-4 2.0 L CDNB engines

expand_moreOil sump lower part


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Replace screws.
Second stage	45°45°45°

expand_moreOil sump top part


First stage	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll Audi gasoline straight-4 2.0 L CDNC engines

expand_moreOil sump lower part


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Use new screws and tighten them crosswise.
Second stage	45°45°45°

expand_moreOil sump top part


First stage	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll Audi diesel V6 3.0 L CDUD engines

expand_moreOil sump lower part

Figure 35. Engine lubrication, Oil sump, Audi diesel V6 3.0 L CDUD, Oil sump lower part.


First stage	1.48 lbf⋅ft1.48 lbf⋅ft2 N⋅m
Replace screws. See figure 35.
Second stage	2.21 lbf⋅ft2.21 lbf⋅ft3 N⋅m
Third stage	90°90°90°

expand_moreOil sump top part

Figure 36. Engine lubrication, Oil sump, Audi diesel V6 3.0 L CDUD, Oil sump top part.


First stage	1.48 lbf⋅ft1.48 lbf⋅ft2 N⋅m
Replace screws. See figure 36.
Second stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Third stage	90°90°90°

expand_moreAll Audi diesel straight-4 2.0 L CGLC engines

expand_moreOn the engine block


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Tighten the screws crosswise.

expand_moreAt the gearbox


Second stage	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m
Replace screws.
Third stage	90°90°90°

expand_moreOn the engine block (M8)


Fourth stage	9.59 lbf⋅ft9.59 lbf⋅ft13 N⋅m
Gradually tighten screws crosswise.

expand_moreOn the engine block (M10)


Fifth stage	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m

expand_moreAll Audi gasoline straight-4 2.0 L CHJA engines

expand_moreOil sump lower part


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Replace screws.
Second stage	45°45°45°

expand_moreOil sump top part


First stage	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll Audi diesel straight-4 2.0 L CJCD engines

expand_moreOn the engine block


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Tighten the screws crosswise.

expand_moreAt the gearbox


Second stage	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m
Replace screws.
Third stage	90°90°90°

expand_moreOn the engine block (M8)


Fourth stage	9.59 lbf⋅ft9.59 lbf⋅ft13 N⋅m
Gradually tighten screws crosswise.

expand_moreOn the engine block (M10)


Fifth stage	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m

expand_moreAll Audi gasoline straight-4 2.0 L CNCD engines

expand_moreOil sump lower part

expand_moreFrom sheet metal

Figure 37. Engine lubrication, Oil sump, Audi gasoline straight-4 2.0 L CNCD, Oil sump lower part, From sheet metal.


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Replace screws. See figure 37.
Second stage	90°90°90°

expand_moreWith plastic housing

Figure 38. Engine lubrication, Oil sump, Audi gasoline straight-4 2.0 L CNCD, Oil sump lower part, With plastic housing.


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Replace screws. See figure 38.
Second stage	90°90°90°

expand_moreOil sump top part

expand_moreScrews 1 – 14

Figure 39. Engine lubrication, Oil sump, Audi gasoline straight-4 2.0 L CNCD, Oil sump top part, Screws 1 – 14.


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Replace screws. See figure 39.

expand_moreScrews 1 – 2


Second stage	180°180°180°

expand_moreScrews 3 – 9


Third stage	45°45°45°

expand_moreScrew 10


Fourth stage	180°180°180°

expand_moreScrews 11 – 14


Fifth stage	90°90°90°

expand_moreAll Audi diesel straight-4 2.0 L CNHA engines

expand_moreOn the engine block

Figure 40. Engine lubrication, Oil sump, Audi diesel straight-4 2.0 L CNHA, On the engine block.


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
See figure 40.

expand_moreAt the gearbox


Second stage	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m
Third stage	90°90°90°

expand_moreOn the engine block (M7)


Fourth stage	9.59 lbf⋅ft9.59 lbf⋅ft13 N⋅m

expand_moreOn the engine block (M10)


Fifth stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m

expand_moreAll Audi gasoline straight-4 2.0 L CPMB engines

expand_moreOil sump lower part


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Replace screws.
Second stage	45°45°45°

expand_moreOil sump top part

Figure 41. Engine lubrication, Oil sump, Audi gasoline straight-4 2.0 L CPMB, Oil sump top part.


First stage	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m
Replace screws. See figure 41.
Second stage	90°90°90°

expand_moreAll Audi diesel V6 3.0 L CTBA engines

expand_moreOil sump lower part

Figure 42. Engine lubrication, Oil sump, Audi diesel V6 3.0 L CTBA, Oil sump lower part.


First stage	1.48 lbf⋅ft1.48 lbf⋅ft2 N⋅m
Replace screws. See figure 42.
Second stage	2.21 lbf⋅ft2.21 lbf⋅ft3 N⋅m
Third stage	90°90°90°

expand_moreOil sump top part

Figure 43. Engine lubrication, Oil sump, Audi diesel V6 3.0 L CTBA, Oil sump top part.


First stage	1.48 lbf⋅ft1.48 lbf⋅ft2 N⋅m
Replace screws. See figure 43.
Second stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Third stage	90°90°90°

expand_moreAll Audi gasoline V6 3.0 L CTUC engines

expand_moreOil sump lower part


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Replace screws.
Second stage	90°90°90°


Oil sump top part	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreAll other modifications


At the gearbox	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
On the engine block	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m
Gradually tighten screws crosswise.

expand_moreEngine management


Camshaft sensor	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m

expand_moreCharge air pressure sensor


All Audi gasoline V6 3.0 L CTUC engines	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
All Audi gasoline V6 3.0 L CTVA engines	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
All other modifications	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m

expand_moreCrankshaft sensor


All Audi gasoline V6 3.2 L CALB engines	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
All Audi diesel V6 3.0 L CCWA engines	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
All Audi diesel V6 3.0 L CCWB engines	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
All Audi diesel V6 3.0 L CDUD engines	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
All Audi gasoline straight-4 2.0 L CNCD engines	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
All Audi diesel V6 3.0 L CPNB engines	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
All Audi diesel V6 3.0 L CTBA engines	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
All Audi gasoline V6 3.0 L CTUC engines	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
All Audi gasoline V6 3.0 L CTVA engines	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
All other modifications	3.32 lbf⋅ft3.32 lbf⋅ft4.5 N⋅m

expand_moreExhaust gas temperature sensor

expand_moreAll Audi diesel straight-4 2.0 L CGLC engines


At the turbocharger	33.19 lbf⋅ft33.19 lbf⋅ft45 N⋅m
On particle filter	44.25 lbf⋅ft44.25 lbf⋅ft60 N⋅m

expand_moreAll Audi diesel straight-4 2.0 L CJCD engines


At the turbocharger	33.19 lbf⋅ft33.19 lbf⋅ft45 N⋅m
On particle filter	44.25 lbf⋅ft44.25 lbf⋅ft60 N⋅m

expand_moreAll Audi diesel straight-4 2.0 L CNHA engines


On exhaust manifold	33.19 lbf⋅ft33.19 lbf⋅ft45 N⋅m
On particle filter	44.25 lbf⋅ft44.25 lbf⋅ft60 N⋅m


All other modifications	33.19 lbf⋅ft33.19 lbf⋅ft45 N⋅m
Use hot screw paste

expand_moreGlow plugs


All Audi diesel V6 3.0 L CDUD engines	8.85 lbf⋅ft8.85 lbf⋅ft12 N⋅m

expand_moreAll Audi diesel straight-4 2.0 L CNHA engines


With combustion chamber pressure sensor	8.85 lbf⋅ft8.85 lbf⋅ft12 N⋅m
Without combustion chamber pressure sensor	12.54 lbf⋅ft12.54 lbf⋅ft17 N⋅m


All Audi diesel V6 3.0 L CTBA engines	8.85 lbf⋅ft8.85 lbf⋅ft12 N⋅m
All other modifications	12.54 lbf⋅ft12.54 lbf⋅ft17 N⋅m

expand_moreKnock sensor

expand_moreAll Audi gasoline straight-4 2.0 L CNCD engines


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Replace screws.
Second stage	90°90°90°


All Audi gasoline V6 3.0 L CTUC engines	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
All Audi gasoline V6 3.0 L CTVA engines	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
All other modifications	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreLambda sensor


All Audi diesel straight-4 2.0 L CAGA engines	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
All Audi diesel straight-4 2.0 L CAGB engines	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
All Audi diesel straight-4 2.0 L CAHA engines	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
All Audi diesel straight-4 2.0 L CAHB engines	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
All Audi diesel V6 3.0 L CCWA engines	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
All Audi diesel V6 3.0 L CCWB engines	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
All Audi diesel straight-4 2.0 L CGLA engines	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
All Audi diesel straight-4 2.0 L CGLB engines	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
All Audi diesel straight-4 2.0 L CGLD engines	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
All Audi diesel straight-4 2.0 L CJCA engines	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
All Audi diesel straight-4 2.0 L CJCB engines	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
All Audi diesel straight-4 2.0 L CMGA engines	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
All Audi gasoline straight-4 2.0 L CNCD engines	44.25 lbf⋅ft44.25 lbf⋅ft60 N⋅m
All Audi diesel straight-4 2.0 L CNHA engines	38.35 lbf⋅ft38.35 lbf⋅ft52 N⋅m
All Audi diesel straight-4 2.0 L CNHC engines	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
All Audi diesel V6 3.0 L CPNB engines	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
All Audi diesel straight-4 2.0 L CSUB engines	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
All other modifications	40.57 lbf⋅ft40.57 lbf⋅ft55 N⋅m

expand_moreEngine mounting

expand_moreEngine bracket


On the engine block	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m

expand_moreEngine mounting


At the subframe	40.57 lbf⋅ft40.57 lbf⋅ft55 N⋅m

expand_moreOn engine bracket


First stage	66.38 lbf⋅ft66.38 lbf⋅ft90 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreSubframe

expand_moreM12 × 100 screws


First stage	84.82 lbf⋅ft84.82 lbf⋅ft115 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreSubframe diagonal strut

expand_moreM12 × 42 screws


First stage	66.38 lbf⋅ft66.38 lbf⋅ft90 N⋅m
Replace screws.
Second stage	135°135°135°

expand_moreM12 × 51 screws


First stage	66.38 lbf⋅ft66.38 lbf⋅ft90 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreTorque arm

expand_moreAll Audi diesel straight-4 2.0 L CAGA engines

expand_moreOn chassis


Cross support	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m


On the engine block	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m


All other modifications	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m

expand_moreExhaust system

expand_moreCatalytic converter


All Audi gasoline straight-4 2.0 L CAEB engines	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Replace the nuts and use fitting paste
All Audi gasoline straight-4 2.0 L CDNC engines	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Replace the nuts and use fitting paste
All Audi gasoline straight-4 2.0 L CNCD engines	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Replace nuts. Use hot screw paste.
All Audi gasoline straight-4 2.0 L CPMA engines	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Replace the nuts and use fitting paste
All Audi gasoline straight-4 2.0 L CPMB engines	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Replace nuts. Use hot screw paste.
All other modifications	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m
Replace the nuts and use fitting paste


Catalytic converter bracket	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m

expand_moreDiesel particulate filter

expand_moreAll Audi diesel straight-4 2.0 L CNHA engines

expand_moreAt the turbocharger


Clamps	5.16 lbf⋅ft5.16 lbf⋅ft7 N⋅m
Use new parts.


All other modifications	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m
Replace nuts. Use hot screw paste.


Differential pressure sensor lines	33.19 lbf⋅ft33.19 lbf⋅ft45 N⋅m
Use hot screw paste

expand_moreExhaust manifold

expand_moreAll Audi gasoline V6 3.2 L CALB engines


First stage	Tighten by hand
Replace nuts.
Second stage	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m
Tighten from inside to outside.
Third stage	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m

expand_moreAll Audi gasoline straight-4 2.0 L CDNB engines

expand_moreNuts


Bottom	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Replace nuts.

expand_moreTop nuts


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Replace nuts.
Second stage	8.85 lbf⋅ft8.85 lbf⋅ft12 N⋅m
Tighten cross-wise.
Third stage	11.8 lbf⋅ft11.8 lbf⋅ft16 N⋅m
Fourth stage	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m

expand_moreAll Audi gasoline straight-4 2.0 L CDNC engines


Bottom	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Replace the nuts and use fitting paste

expand_moreTop


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Replace nuts.
Second stage	8.85 lbf⋅ft8.85 lbf⋅ft12 N⋅m
Third stage	11.8 lbf⋅ft11.8 lbf⋅ft16 N⋅m
Fourth stage	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m

expand_moreAll Audi gasoline straight-4 2.0 L CHJA engines

expand_moreNuts


Bottom	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Replace nuts. Use hot screw paste.

expand_moreTop nuts


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Replace nuts. Use hot screw paste.
Second stage	8.85 lbf⋅ft8.85 lbf⋅ft12 N⋅m
Third stage	11.8 lbf⋅ft11.8 lbf⋅ft16 N⋅m
Fourth stage	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m

expand_moreAll Audi diesel straight-4 2.0 L CNHA engines


First stage	8.11 lbf⋅ft8.11 lbf⋅ft11 N⋅m
Tighten crosswise from inside to outside.
Second stage	16.23 lbf⋅ft16.23 lbf⋅ft22 N⋅m
Third stage	16.23 lbf⋅ft16.23 lbf⋅ft22 N⋅m
Control tensioner

expand_moreAll Audi gasoline straight-4 2.0 L CPMB engines


Bottom	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Replace nuts. Use hot screw paste.

expand_moreTop

Figure 44. Exhaust system, Exhaust manifold, Audi gasoline straight-4 2.0 L CPMB, Top.


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Replace nuts. Use hot screw paste. See figure 44.
Second stage	8.85 lbf⋅ft8.85 lbf⋅ft12 N⋅m
Third stage	11.8 lbf⋅ft11.8 lbf⋅ft16 N⋅m
Fourth stage	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m


All other modifications	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Replace the nuts and use fitting paste

expand_moreExhaust manifold heat shields


All Audi gasoline straight-4 2.0 L CNCD engines	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
All Audi diesel straight-4 2.0 L CNHA engines	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m
All other modifications	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m


Exhaust pipe	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Replace nuts.
Exhaust pipe bracket	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m
Exhaust pipe rear	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Particle filter bracket	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m
Replace nuts.

expand_moreFuel supply


Fuel filter bracket	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m

expand_moreFuel lines


High-pressure side	19.91 lbf⋅ft19.91 lbf⋅ft27 N⋅m

expand_moreIgnition system


Spark plugs	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m

expand_moreStart system

expand_moreStarter

expand_moreAll Audi diesel straight-4 2.0 L CAGB engines


M10	47.94 lbf⋅ft47.94 lbf⋅ft65 N⋅m

expand_moreM12


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll Audi gasoline straight-4 2.0 L CDNB engines


M10 × 50 screws	47.94 lbf⋅ft47.94 lbf⋅ft65 N⋅m

expand_moreAll Audi diesel straight-4 2.0 L CGLC engines


M10	47.94 lbf⋅ft47.94 lbf⋅ft65 N⋅m

expand_moreM12


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Second stage	90°90°90°

expand_moreAll Audi diesel straight-4 2.0 L CJCD engines


M10	47.94 lbf⋅ft47.94 lbf⋅ft65 N⋅m

expand_moreM12


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Second stage	90°90°90°

expand_moreAll Audi gasoline straight-4 2.0 L CNCD engines


M10	47.94 lbf⋅ft47.94 lbf⋅ft65 N⋅m

expand_moreM12 × 100 screws


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Second stage	90°90°90°

expand_moreAll Audi gasoline straight-4 2.0 L CPMB engines


M10	47.94 lbf⋅ft47.94 lbf⋅ft65 N⋅m

expand_moreM12 × 100 screws


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Second stage	90°90°90°


All other modifications	47.94 lbf⋅ft47.94 lbf⋅ft65 N⋅m

Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2013 Audi Q5 Quattro user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.

Before doing any DIY service please check your insurance policy and Audi warranty policy for your region. In some regions DIY service may invalidate your warranty.

Maintenance Items

Engine Fastener Tightening Specifications
Front Suspension Fastener Tightening Specifications
Rear Suspension Fastener Tightening Specifications
Transmission Fastener Tightening Specifications

Service Intervals

Conquer your fears and never give up!

DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Audi Q5 Quattro service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.

Doing basic service for your 2013 Audi Q5 Quattro you're not only saving money, but also also improving your technical skills and learning something new.

2013 Audi Q5 Quattro First generation facelift Engine Fastener Tightening Specifications

Table of Contents

Conquer your fears and never give up!

Audi Q5 Quattro First generation facelift model years

Suggest edit