2019 Audi Q3 RS First generation Transmission Fastener Tightening Specifications
in your garage to make future searches easy.
Condition | Value |
---|
0BS axle drive | 11.06 lbf⋅ft |
First stage | 7.38 lbf⋅ft |
Use new screws and tighten them crosswise. |
Second stage | 51.63 lbf⋅ft |
Second stage | 29.5 lbf⋅ft |
First stage | 147.51 lbf⋅ft |
Replace screws. | |
Second stage | 180° |
Propeller shaft intermediate bearing | 18.44 lbf⋅ft |
First stage | 147.51 lbf⋅ft |
Replace screws. | |
Second stage | 180° |
First stage | 7.38 lbf⋅ft |
Use new screws and tighten them crosswise. |
Second stage | 51.63 lbf⋅ft |
Second stage | 29.5 lbf⋅ft |
First stage | 36.88 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
On axle | 44.25 lbf⋅ft |
On transfer case | 44.25 lbf⋅ft |
First stage | 44.25 lbf⋅ft |
Replace screws. | |
Second stage | 180° |
0BS axle drive | 11.06 lbf⋅ft |
M10 | 29.5 lbf⋅ft |
M12 | 59 lbf⋅ft |
0AV transfer case | 11.06 lbf⋅ft |
Use new screw. |
0AV transfer case | 11.06 lbf⋅ft |
Use new screw. |
M24 | 33.19 lbf⋅ft |
Replace sealing rings. | |
Overflow pipe | 2.21 lbf⋅ft |
First stage | 7.38 lbf⋅ft |
Replace sealing rings. | |
Second stage | 30° |
M24 | 33.19 lbf⋅ft |
Replace sealing rings. |
0BH transmission | 14.75 lbf⋅ft |
Replace sealing rings. |
First stage | 44.25 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 44.25 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
RS 2.5 quattro with gasoline straight-5 2.5 L 306 HP, 420 N⋅m at 1500 RPM engine (2013.10–) | 29.5 lbf⋅ft |
Tighten the screws evenly in several steps. |
First stage | Screw in screw(s) by hand. |
Replace screws. | |
Second stage | 29.5 lbf⋅ft |
Third stage | 90° |
Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2019 Audi Q3 RS user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.
Before doing any DIY service please check your insurance policy and Audi warranty policy for your region. In some regions DIY service may invalidate your warranty.
Table of Contents
- Air Conditioning Compressor Oil Capacity
- Air Conditioning Refrigerant Capacity
- All-wheel Drive Clutch Oil Capacity
- Axle Oil Capacity
- Brake Fluid Capacity
- Cooling Fluid Capacity
- Engine Oil Capacity
- Fluid and Lubricant Specifications
- Gearbox Oil Capacity
- Manual Transmission Oil Capacity
- Brake System Specifications
- Chassis Specifications
- Cooling System Specifications
- Electrical System Specifications
- Emission
- Engine Fastener Tightening Specifications
- Front Suspension Fastener Tightening Specifications
- Rear Suspension Fastener Tightening Specifications
- Transmission Fastener Tightening Specifications
Conquer your fears and never give up!
DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Audi Q3 RS service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.
Doing basic service for your 2019 Audi Q3 RS you're not only saving money, but also also improving your technical skills and learning something new.