in your garage to make future searches easy.

Condition Value
expand_moreFront axle brake
Bleed valve 7.38 lbf⋅ft
expand_moreBrake hose
At the brake caliper 25.81 lbf⋅ft
expand_moreBrake line
Socket unions 10.33 lbf⋅ft
Front axle brake caliper 22.13 lbf⋅ft
Front axle brake caliper mounting support 147.51 lbf⋅ft
Replace screws.
Front axle brake disc 2.95 lbf⋅ft
Wheel speed sensor 5.9 lbf⋅ft
expand_moreFront axle steering
Lower steering column joint 22.13 lbf⋅ft
Replace screws.
Steering column 14.75 lbf⋅ft
expand_moreSteering gear
First stage 36.88 lbf⋅ft
Replace screws.
Second stage 90°
Steering wheel 36.88 lbf⋅ft
Replace nuts.
Track rod end on stub axle 36.88 lbf⋅ft
Replace nuts.
Track rod end on track rod 51.63 lbf⋅ft
Track rod on steering gear 73.76 lbf⋅ft
expand_moreFront axle suspension
Shock-absorber piston rod 44.25 lbf⋅ft
Replace nuts.
expand_moreSuspension strut
expand_moreOn chassis
First stage 11.06 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreOn stub axle
First stage 51.63 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreWheel suspension
expand_moreFront axle drive shaft
expand_moreAt the gearbox
First stage 7.38 lbf⋅ft
Use new screws and tighten them crosswise.
expand_moreM10
Second stage 51.63 lbf⋅ft
expand_moreM8
Second stage 29.5 lbf⋅ft
expand_moreCentral screws
First stage 147.51 lbf⋅ft
Replace screws.
Second stage 180°
Stabiliser mounting at the stabiliser 47.94 lbf⋅ft
Replace nuts.
Stabiliser mounting at suspension strut 47.94 lbf⋅ft
Replace nuts.
expand_moreStabilizer mounting at the subframe
First stage 14.75 lbf⋅ft
Replace screws.
Second stage 90°
Support joint at the stub axle 44.25 lbf⋅ft
Replace nuts.
Support joint at the transverse control arm 73.76 lbf⋅ft
Replace nuts.
expand_moreTransverse control arm
expand_moreM10 × 70 screws
First stage 36.88 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreM12 × 100 screws
First stage 51.63 lbf⋅ft
Replace screws.
Second stage 180°
expand_moreM12 × 110 screws
First stage 51.63 lbf⋅ft
Replace screws.
Second stage 180°
expand_moreWheel hub wheel bearing
expand_moreWheel bearing unit
First stage 51.63 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreWheels and tires
Tire pressure sensors 2.95 lbf⋅ft
Replace bolts.
Wheel attachment 103.26 lbf⋅ft

Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2018 Audi Q3 Quattro user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.

Before doing any DIY service please check your insurance policy and Audi warranty policy for your region. In some regions DIY service may invalidate your warranty.

Conquer your fears and never give up!

DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Audi Q3 Quattro service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.

Doing basic service for your 2018 Audi Q3 Quattro you're not only saving money, but also also improving your technical skills and learning something new.

Audi Q3 Quattro First generation facelift model years

Units:
facebook twitter reddit linkedin messenger whatsapp telegram skype email chat