2013 Audi A8 D4 facelift Front Suspension Fastener Tightening Specifications
in your garage to make future searches easy.
Condition | Value |
---|
At the brake caliper | 14.75 lbf⋅ft |
Brake line | 10.33 lbf⋅ft |
Brake lining retaining spring | 16.23 lbf⋅ft |
Guide screws | 40.57 lbf⋅ft |
M14 × 1,5 screws | 144.56 lbf⋅ft |
M14 × 1,5 screws | 144.56 lbf⋅ft |
Wheel speed sensor | 6.64 lbf⋅ft |
Lower steering column joint | 22.13 lbf⋅ft |
Use new screw. |
First stage | 59 lbf⋅ft |
Use new screws and nuts. | |
Second stage | 180° |
Track rod end on stub axle | 95.88 lbf⋅ft |
Replace nuts. | |
Track rod end on track rod | 44.25 lbf⋅ft |
With electric servo-steering | 73.76 lbf⋅ft |
With electric servo-steering | 73.76 lbf⋅ft |
With hydraulic servo-steering | 77.44 lbf⋅ft |
First stage | 29.5 lbf⋅ft |
Replace screws and nuts. | |
Second stage | 180° |
First stage | 66.38 lbf⋅ft |
Replace screws and nuts. | |
Second stage | 90° |
On chassis | 22.13 lbf⋅ft |
Replace the nuts and tighten alternately |
First stage | 147.51 lbf⋅ft |
Replace screws. | |
Second stage | 180° |
M10 | 51.63 lbf⋅ft |
Use new screws. |
First stage | 66.38 lbf⋅ft |
Use new screws. | |
Second stage | 90° |
First stage | 147.51 lbf⋅ft |
Replace screws. | |
Second stage | 180° |
M10 | 51.63 lbf⋅ft |
Use new screws. |
First stage | 66.38 lbf⋅ft |
Use new screws. | |
Second stage | 90° |
M10 | 51.63 lbf⋅ft |
Replace screws. |
First stage | 66.38 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 29.5 lbf⋅ft |
Replace screws and nuts. | |
Second stage | 90° |
Stabilizer mounting at the subframe | 25.81 lbf⋅ft |
Replace nuts. | |
Support joint at the stub axle | 29.5 lbf⋅ft |
Replace screws. | |
Support joint at the transverse control arm | 88.51 lbf⋅ft |
Replace nuts. |
First stage | 51.63 lbf⋅ft |
Replace screws and nuts. | |
Second stage | 180° |
On stub axle | 88.51 lbf⋅ft |
Replace nuts. |
First stage | 51.63 lbf⋅ft |
Replace screws and nuts. | |
Second stage | 180° |
On stub axle | 88.51 lbf⋅ft |
Replace nuts. |
First stage | 36.88 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
On stub axle | 29.5 lbf⋅ft |
Replace nuts. |
First stage | 36.88 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
On stub axle | 29.5 lbf⋅ft |
Replace nuts. |
First stage | 147.51 lbf⋅ft |
Use new screw. | |
Second stage | 180° |
First stage | 59 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
With run-flat tires | 103.26 lbf⋅ft |
Otherwise | 88.51 lbf⋅ft |
Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2013 Audi A8 user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.
Before doing any DIY service please check your insurance policy and Audi warranty policy for your region. In some regions DIY service may invalidate your warranty.
Table of Contents
- Air Conditioning Compressor Oil Capacity
- Air Conditioning Refrigerant Capacity
- Automatic Transmission Fluid Capacity
- Axle Oil Capacity
- Brake Fluid Capacity
- Cooling Fluid Capacity
- Engine Oil Capacity
- Fluid and Lubricant Specifications
- Gearbox Oil Capacity
- Brake System Specifications
- Chassis Specifications
- Cooling System Specifications
- Electrical System Specifications
- Emission
- Engine Fastener Tightening Specifications
- Front Suspension Fastener Tightening Specifications
- Rear Suspension Fastener Tightening Specifications
- Transmission Fastener Tightening Specifications
Conquer your fears and never give up!
DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Audi A8 service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.
Doing basic service for your 2013 Audi A8 you're not only saving money, but also also improving your technical skills and learning something new.
2013 Audi A8 generations
In 2013 Audi offered 2 generations of the A8. Front suspension fastener tightening specifications may vary in different generations. Be sure that you are looking at the rigt modification.