in your garage to make future searches easy.

Condition Value
expand_moreRear axle brake
Rear axle brake caliper 25.81 lbf⋅ft
Use new screws.
Rear axle brake caliper mounting support 103.26 lbf⋅ft
Use new screws.
Rear axle brake line 10.33 lbf⋅ft
Rear axle wheel speed sensor 13.28 lbf⋅ft
expand_moreRear axle steering
expand_moreRear axle track rod
At the subframe 70.07 lbf⋅ft
Replace nuts.
expand_moreOn stub axle
First stage 55.32 lbf⋅ft
Replace nuts.
Second stage 45°
expand_moreRear axle suspension
expand_moreRear axle suspension strut
expand_moreAll Audi gasoline V6 3.0 L ASN engines
expand_moreAt the transverse control arm
First stage 59 lbf⋅ft
Replace nuts.
Second stage 90°
On chassis 20.65 lbf⋅ft
expand_moreAll Audi gasoline V6 3.0 L BBJ engines
expand_moreAt the transverse control arm
First stage 59 lbf⋅ft
Replace nuts.
Second stage 90°
On chassis 20.65 lbf⋅ft
expand_moreRear axle wheel suspension
expand_moreRear axle carrier
expand_moreSubframe
First stage 110.63 lbf⋅ft
Replace screws.
Second stage 90°
Rear axle stabilizer mounting 18.44 lbf⋅ft
expand_moreRear axle stabilizer support at the axle control arm
First stage 36.88 lbf⋅ft
Use new screws and nuts.
Second stage 90°
expand_moreRear axle stabilizer support at the stabilizer
First stage 47.94 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreTrack control arm lower
expand_moreAt the subframe
First stage 59 lbf⋅ft
Use new screws and nuts.
Second stage 90°
expand_moreOn stub axle
First stage 59 lbf⋅ft
Use new screws and nuts.
Second stage 90°
expand_moreTrack control arm upper
expand_moreAt the subframe
First stage 59 lbf⋅ft
Use new screws and nuts.
Second stage 90°
On stub axle 70.07 lbf⋅ft
Replace nuts.
expand_moreWheel hub wheel bearing
expand_moreCentral screws
First stage 147.51 lbf⋅ft
Use new screw.
Second stage 180°
expand_moreWheel bearing unit
expand_moreFirst stage
First step 59 lbf⋅ft
Replace screws.
Second step 135°
Second stage 360° detach
expand_moreThird stage
First step 59 lbf⋅ft
Second step 90°
expand_moreWheels and tires
expand_moreTire pressure sensors
Torx screws 2.95 lbf⋅ft
Replace the screw.
Union nuts 2.95 lbf⋅ft
expand_moreWheel attachment
With run-flat tires 103.26 lbf⋅ft
Otherwise 88.51 lbf⋅ft

Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2003 Audi A8 user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.

Before doing any DIY service please check your insurance policy and Audi warranty policy for your region. In some regions DIY service may invalidate your warranty.

Conquer your fears and never give up!

DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Audi A8 service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.

Doing basic service for your 2003 Audi A8 you're not only saving money, but also also improving your technical skills and learning something new.

Audi A8 D3 model years

Units:
facebook twitter reddit linkedin messenger whatsapp telegram skype email chat