1999 Audi A8 D2 first facelift Transmission Fastener Tightening Specifications
in your garage to make future searches easy.
Condition | Value |
---|
Drive shaft heat protection plate | 16.96 lbf⋅ft |
M10 | 51.63 lbf⋅ft |
M8 | 29.5 lbf⋅ft |
First stage | 140.14 lbf⋅ft |
Use new screw. | |
Second stage | 180° |
Clutch pressure plate | 18.44 lbf⋅ft |
Gradually tighten screws crosswise. |
All Audi diesel V6 2.5 L AFB engines | 14.75 lbf⋅ft |
All Audi diesel V6 2.5 L AKN engines | 14.75 lbf⋅ft |
Hexagon head screws | 18.44 lbf⋅ft |
Use screw-locking compound. | |
Hexagon head screws | 14.75 lbf⋅ft |
Use new screw. |
Clamping screws | 18.44 lbf⋅ft |
At the gearbox | 14.75 lbf⋅ft |
Use new screw. |
Clamping screws | 18.44 lbf⋅ft |
Clamping screws | 29.5 lbf⋅ft |
M10 × 135 screws | 47.94 lbf⋅ft |
M10 × 45 screws | 33.19 lbf⋅ft |
M10 × 50 screws | 33.19 lbf⋅ft |
M12 | 47.94 lbf⋅ft |
01V gearbox | 29.5 lbf⋅ft |
Use new seal and screws. |
01E gearbox | 29.5 lbf⋅ft |
09L gearbox | 59 lbf⋅ft |
Replace sealing rings. |
With manual transmission | 18.44 lbf⋅ft |
01V gearbox | 59 lbf⋅ft |
Replace sealing rings. |
Gearbox mounting | 29.5 lbf⋅ft |
Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 1999 Audi A8 user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.
Before doing any DIY service please check your insurance policy and Audi warranty policy for your region. In some regions DIY service may invalidate your warranty.
Table of Contents
- Air Conditioning Compressor Oil Capacity
- Air Conditioning Refrigerant Capacity
- Automatic Transmission Fluid Capacity
- Axle Oil Capacity
- Brake Fluid Capacity
- Cooling Fluid Capacity
- Engine Oil Capacity
- Fluid and Lubricant Specifications
- Manual Transmission Oil Capacity
- Brake System Specifications
- Chassis Specifications
- Cooling System Specifications
- Drive Belts Specifications
- Emission
- Engine Fastener Tightening Specifications
- Front Suspension Fastener Tightening Specifications
- Rear Suspension Fastener Tightening Specifications
- Transmission Fastener Tightening Specifications
Conquer your fears and never give up!
DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Audi A8 service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.
Doing basic service for your 1999 Audi A8 you're not only saving money, but also also improving your technical skills and learning something new.
1999 Audi A8 generations
In 1999 Audi offered 2 generations of the A8. Transmission fastener tightening specifications may vary in different generations. Be sure that you are looking at the rigt modification.