2005 Audi A8 Quattro D3 Engine Fastener Tightening Specifications
in your garage to make future searches easy.
Condition | Value |
---|
Induction-pipe flap control unit | 6.64 lbf⋅ft |
Intake manifold | 7.38 lbf⋅ft |
Gradually tighten screws crosswise. |
Audi diesel V6 3.0 L BNG 208 HP | 16.96 lbf⋅ft |
Audi diesel V6 3.0 L ASB 229 HP | 16.96 lbf⋅ft |
Audi gasoline V6 3.1 L BPK 256 HP at 6500 RPM, 330 N⋅m at 3250 RPM | 29.5 lbf⋅ft |
Bottom | 16.96 lbf⋅ft |
Top | 33.19 lbf⋅ft |
Audi diesel V8 4.1 L BMC 315 HP | 18.44 lbf⋅ft |
Property class 10.9 |
Class 10.9 | 18.44 lbf⋅ft |
Bottom | 16.96 lbf⋅ft |
Top | 33.19 lbf⋅ft |
All other modifications | 23.6 lbf⋅ft |
M10 | 36.88 lbf⋅ft |
M8 | 16.23 lbf⋅ft |
Audi gasoline V8 4.2 L BFM 330 HP at 6500 RPM, 430 N⋅m at 3500 RPM | 31.72 lbf⋅ft |
All other modifications | 16.96 lbf⋅ft |
First stage | 23.6 lbf⋅ft |
Use new screw. | |
Second stage | 90° |
First stage | 36.88 lbf⋅ft |
Use new screw. | |
Second stage | 90° |
Property class 10.9 |
All other modifications | 36.88 lbf⋅ft |
Property class 10.9 |
Air-conditioning compressor | 18.44 lbf⋅ft |
All Audi gasoline V6 3.1 L BPK engines | 14.75 lbf⋅ft |
All other modifications | 29.5 lbf⋅ft |
Air-conditioning compressor pressure line | 18.44 lbf⋅ft |
Alternator | 16.96 lbf⋅ft |
All Audi gasoline V8 3.7 L BFL engines | 18.44 lbf⋅ft |
All Audi gasoline V8 4.2 L BFM engines | 18.44 lbf⋅ft |
All Audi gasoline V6 3.1 L BPK engines | 29.5 lbf⋅ft |
All other modifications | 23.6 lbf⋅ft |
All Audi gasoline V6 3.1 L BPK engines | 14.75 lbf⋅ft |
All other modifications | 16.96–18.44 lbf⋅ft |
Audi gasoline V6 3.1 L BPK 256 HP at 6500 RPM, 330 N⋅m at 3250 RPM | 14.75 lbf⋅ft |
M12 | 47.94 lbf⋅ft |
M8 | 16.23 lbf⋅ft |
All other modifications | 16.96–18.44 lbf⋅ft |
Vacuum pump | 7.38 lbf⋅ft |
All Audi diesel V8 4.1 L BVN engines | 16.23 lbf⋅ft |
4.2 TDI quattro with diesel V8 4.1 L 322 HP at 3750 RPM, 650 N⋅m at 1600 RPM engine (2005.7–2010.7) | 18.44 lbf⋅ft |
4.2 TDI quattro with diesel V8 4.1 L 322 HP at 3750 RPM, 650 N⋅m at 1600 RPM engine (2005.7–2010.7) | 16.23 lbf⋅ft |
High-pressure pump pulley | 51.63 lbf⋅ft |
Injection hoses | 18.44 lbf⋅ft |
Nuts | 7.38 lbf⋅ft |
Screws | 3.69 lbf⋅ft |
Nuts | 6.64 lbf⋅ft |
Screws | 3.69 lbf⋅ft |
M6 | 6.64 lbf⋅ft |
M8 | 16.23 lbf⋅ft |
All other modifications | 16.23 lbf⋅ft |
All Audi diesel V6 3.0 L ASB engines | 4.43 lbf⋅ft |
Clamps | 4.43 lbf⋅ft |
All Audi diesel V6 3.0 L BNG engines | 4.43 lbf⋅ft |
First stage | 14.75 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 14.75 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
Use hot screw paste |
First stage | 14.75 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
Use hot screw paste |
First stage | 22.13 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
Use hot screw paste |
Banjo screws | 11.06 lbf⋅ft |
Replace sealing rings. |
On the engine block | 6.64 lbf⋅ft |
Replace sealing rings. |
Turbocharger oil return line | 6.64 lbf⋅ft |
Replace sealing rings. |
Nuts | 7.38 lbf⋅ft |
Screws | 10.33 lbf⋅ft |
Nuts | 7.38 lbf⋅ft |
Screws | 10.33 lbf⋅ft |
All other modifications | 7.38 lbf⋅ft |
All Audi diesel V6 3.0 L ASB engines | 16.96 lbf⋅ft |
All Audi diesel V6 3.0 L BNG engines | 16.96 lbf⋅ft |
All Audi gasoline V6 3.1 L BPK engines | 14.75 lbf⋅ft |
All other modifications | 5.9 lbf⋅ft |
Fan wheel | 7.38 lbf⋅ft |
Replace screws. | |
Radiator mounting | 4.43 lbf⋅ft |
First stage | Screw in screw(s) by hand. |
Note correct order of tensioning. See figure 1. | |
Second stage | 6.64 lbf⋅ft |
First stage | 3.69 lbf⋅ft |
Use new screws. | |
Second stage | 90° |
First stage | 3.69 lbf⋅ft |
Use new screws. | |
Second stage | 90° |
First stage | 3.69 lbf⋅ft |
Second stage | 45° |
All other modifications | 7.38 lbf⋅ft |
Tighten in steps from inside to outside. |
First stage | 29.5 lbf⋅ft |
Use new screws. See figure 2. | |
Second stage | 90° |
Third stage | 90° |
First stage | 22.13 lbf⋅ft |
Use new screws. See figure 3. | |
Second stage | 44.25 lbf⋅ft |
Third stage | 90° |
Fourth stage | 90° |
First stage | 22.13 lbf⋅ft |
Use new screws. See figure 3. | |
Second stage | 44.25 lbf⋅ft |
Third stage | 90° |
Fourth stage | 90° |
First stage | 22.13 lbf⋅ft |
Use new screws. See figure 3. | |
Second stage | 36.88 lbf⋅ft |
Screw in the short outer screws | |
Third stage | 90° |
Fourth stage | 90° |
First stage | 25.81 lbf⋅ft |
Use new screws. See figure 4. | |
Second stage | 44.25 lbf⋅ft |
Third stage | 90° |
Fourth stage | 90° |
Cylinder head screws shank length (new) | 6.1 in |
First stage | 5.9 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
Gradually tighten screws crosswise. |
First stage | 5.9 lbf⋅ft |
Use new screws and tighten them crosswise. | |
Second stage | 90° |
All other modifications | 7.38 lbf⋅ft |
Gradually tighten screws crosswise. |
Central screws | 44.25 lbf⋅ft |
Wheel | 16.96 lbf⋅ft |
First stage | 11.06 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
All Audi diesel V8 4.1 L BVN engines | 33.19 lbf⋅ft |
First stage | 29.5 lbf⋅ft |
Use new screws. | |
Second stage | 90° |
First stage | 25.81 lbf⋅ft |
Replace and lightly oil the screws. | |
Second stage | 90° |
First stage | 25.81 lbf⋅ft |
Replace and lightly oil the screws. | |
Second stage | 90° |
First stage | 22.13 lbf⋅ft |
Use new screws. | |
Second stage | 90° |
First stage | 73.76 lbf⋅ft |
Use new screw. | |
Second stage | 90° |
First stage | 147.51 lbf⋅ft |
Use new screw. | |
Second stage | 180° |
First stage | 22.13 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
All Audi gasoline V12 6.0 L BHT engines | 22.13 lbf⋅ft |
All Audi gasoline V6 3.1 L BPK engines | 10.33 lbf⋅ft |
All Audi gasoline V12 6.0 L BSB engines | 22.13 lbf⋅ft |
All Audi gasoline V12 6.0 L BTE engines | 22.13 lbf⋅ft |
First stage | 22.13 lbf⋅ft |
Use new screw. | |
Second stage | 90° |
First stage | 44.25 lbf⋅ft |
Use new screws. | |
Second stage | 90° |
First stage | 44.25 lbf⋅ft |
Use new screws. | |
Second stage | 180° |
First stage | 44.25 lbf⋅ft |
Use new screws. | |
Second stage | 180° |
First stage | 44.25 lbf⋅ft |
Use new screws. | |
Second stage | 90° |
First stage | 22.13 lbf⋅ft |
Use new screws. | |
Second stage | 90° |
First stage | 22.13 lbf⋅ft |
Tighten the screws cross-wise from inside to outside. | |
Second stage | 36.88 lbf⋅ft |
Use new screws. | |
Third stage | 90° |
First stage | Tighten by hand |
Replace nuts. | |
Second stage | 25.81 lbf⋅ft |
from inside to outside | |
Third stage | 90° |
First stage | 16.23 lbf⋅ft |
Use new screws. | |
Second stage | 90° |
First stage | Tighten by hand |
Replace nuts. | |
Second stage | 25.81 lbf⋅ft |
from inside to outside | |
Third stage | 90° |
First stage | 16.23 lbf⋅ft |
Use new screws. | |
Second stage | 90° |
First stage | 22.13 lbf⋅ft |
Use new screws. | |
Second stage | 36.88 lbf⋅ft |
Tighten the screws cross-wise from inside to outside. | |
Third stage | 90° |
First stage | 14.75 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
Property class 10.9 |
First stage | 16.23 lbf⋅ft |
Replace screws. |
Audi gasoline V6 3.1 L BPK 256 HP at 6500 RPM, 330 N⋅m at 3250 RPM | 22.13 lbf⋅ft |
First stage | 16.23 lbf⋅ft |
Replace screws. |
First stage | 22.13 lbf⋅ft |
Replace screws. | |
Second stage | 45° |
First stage | 22.13 lbf⋅ft |
Replace screws. | |
Second stage | 45° |
All other modifications | 16.96 lbf⋅ft |
M6 | 6.64 lbf⋅ft |
M8 | 16.96 lbf⋅ft |
M6 | 6.64 lbf⋅ft |
Tighten cross-wise. | |
M8 | 14.75 lbf⋅ft |
First stage | 3.69 lbf⋅ft |
Tighten the screws cross-wise from inside to outside. | |
Second stage | 7.38 lbf⋅ft |
Third stage | 16.23 lbf⋅ft |
M6 | 6.64 lbf⋅ft |
M8 | 16.23 lbf⋅ft |
M6 | 6.64 lbf⋅ft |
M8 | 16.23 lbf⋅ft |
M6 | 7.38 lbf⋅ft |
M8 | 14.75 lbf⋅ft |
M10 | 33.19 lbf⋅ft |
M8 | 16.23 lbf⋅ft |
M10 | 33.19 lbf⋅ft |
M8 | 16.23 lbf⋅ft |
First stage | 3.69 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 3.69 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
All other modifications | 11.06 lbf⋅ft |
Audi gasoline V6 3.1 L BPK 256 HP at 6500 RPM, 330 N⋅m at 3250 RPM | 6.64 lbf⋅ft |
Audi diesel V8 3.9 L ASE 271 HP at 3750 RPM, 650 N⋅m at 1800 RPM | 7.38 lbf⋅ft |
Left | 6.64 lbf⋅ft |
Right | 44.25 lbf⋅ft |
First stage | 3.69 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 3.69 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 3.69 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
Left | 14.75 lbf⋅ft |
Audi diesel V8 3.9 L ASE 271 HP at 3750 RPM, 650 N⋅m at 1800 RPM | 110.63 lbf⋅ft |
Left | 40.57 lbf⋅ft |
Replace the screws and lubricate lightly | |
Right | 40.57 lbf⋅ft |
Replace the screws and lubricate lightly |
Auxiliary drive belt side | 110.63 lbf⋅ft |
Sprocket wheel | 17.7 lbf⋅ft |
High pressure pump belt | 55.32 lbf⋅ft |
Left | 40.57 lbf⋅ft |
Replace the screws and lubricate lightly | |
Right | 40.57 lbf⋅ft |
Replace the screws and lubricate lightly |
Sprocket wheel | 16.96 lbf⋅ft |
High pressure pump belt | 55.32 lbf⋅ft |
First stage | 3.69 lbf⋅ft |
Use new screw. | |
Second stage | 90° |
Audi diesel V6 3.0 L BNG 208 HP | 8.85 lbf⋅ft |
Audi diesel V6 3.0 L ASB 229 HP | 8.85 lbf⋅ft |
Audi gasoline V6 3.1 L BPK 256 HP at 6500 RPM, 330 N⋅m at 3250 RPM | 7.38 lbf⋅ft |
Audi diesel V8 3.9 L ASE 271 HP at 3750 RPM, 650 N⋅m at 1800 RPM | 7.38 lbf⋅ft |
Audi gasoline V12 6.0 L BHT 444 HP | 6.64 lbf⋅ft |
Audi gasoline V12 6.0 L BSB 444 HP | 6.64 lbf⋅ft |
Audi gasoline V12 6.0 L BTE 444 HP | 6.64 lbf⋅ft |
First stage | 3.69 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 3.69 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 3.69 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
All other modifications | 8.85 lbf⋅ft |
First stage | 22.13 lbf⋅ft |
Use new screw. | |
Second stage | 90° |
First stage | 4.43 lbf⋅ft |
Use new screw. | |
Second stage | 60° |
First stage | 3.69 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
Wheel | 33.19 lbf⋅ft |
First stage | 3.69 lbf⋅ft |
Use new screw. | |
Second stage | 90° |
First stage | 44.25 lbf⋅ft |
Use new screw. | |
Second stage | 90° |
M10 | 33.19 lbf⋅ft |
First stage | 3.69 lbf⋅ft |
Use new screw. | |
Second stage | 90° |
First stage | 7.38 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 3.69 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 3.69 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
Audi gasoline V12 6.0 L BHT 444 HP | 11.06 lbf⋅ft |
Audi gasoline V12 6.0 L BSB 444 HP | 11.06 lbf⋅ft |
Audi gasoline V12 6.0 L BTE 444 HP | 11.06 lbf⋅ft |
All other modifications | 8.85 lbf⋅ft |
With hydraulic tensioning device | 7.38 lbf⋅ft |
With hydraulic tensioning device | 7.38 lbf⋅ft |
Injection pump drive belt tensioning roller | 16.23 lbf⋅ft |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 59 lbf⋅ft |
Third stage | 90° |
Audi diesel V8 4.1 L BVN 322 HP at 3750 RPM, 650 N⋅m at 1600 RPM | 17.7 lbf⋅ft |
First stage | 44.25 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 4.43 lbf⋅ft |
Replace screws. | |
Second stage | 45° |
First stage | 3.69 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 3.69 lbf⋅ft |
Replace bolts. | |
Second stage | 90° |
M6 | 6.64 lbf⋅ft |
M8 | 14.75 lbf⋅ft |
All other modifications | 6.64 lbf⋅ft |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 59 lbf⋅ft |
Third stage | 90° |
First stage | 44.25 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
All Audi diesel V6 3.0 L ASB engines | 8.85 lbf⋅ft |
First stage | 3.69 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 3.69 lbf⋅ft |
Second stage | 90° |
Left | 30.98 lbf⋅ft |
Right | 18.44 lbf⋅ft |
M6 | 6.64 lbf⋅ft |
M8 | 16.96 lbf⋅ft |
First stage | 5.9 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
Gradually tighten screws crosswise. |
First stage | 3.69 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 5.9 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 5.9 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
All other modifications | 7.38 lbf⋅ft |
Gradually tighten screws crosswise. |
First stage | 5.9 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
Gradually tighten screws crosswise. |
First stage | 3.69 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 5.9 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 5.9 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
All other modifications | 7.38 lbf⋅ft |
Gradually tighten screws crosswise. |
Rear | 7.38 lbf⋅ft |
Toothed belt guard at the bottom | 7.38 lbf⋅ft |
Left | 7.38 lbf⋅ft |
Left | 7.38 lbf⋅ft |
All Audi diesel V6 3.0 L ASB engines | 16.23 lbf⋅ft |
All Audi diesel V8 3.9 L ASE engines | 16.23 lbf⋅ft |
All other modifications | 33.19 lbf⋅ft |
First stage | 5.9 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
All other modifications | 7.38 lbf⋅ft |
Oil cooler lines | 6.64 lbf⋅ft |
Coolant line. |
M14 | 22.13 lbf⋅ft |
M24 | 36.88 lbf⋅ft |
Audi diesel V8 3.9 L ASE 271 HP at 3750 RPM, 650 N⋅m at 1800 RPM | 36.88 lbf⋅ft |
Audi gasoline V8 3.7 L BFL 276 HP at 6000 RPM, 360 N⋅m at 3750 RPM | 36.88 lbf⋅ft |
Audi diesel V8 4.1 L BMC 315 HP | 36.88 lbf⋅ft |
Audi diesel V8 4.1 L BVN 322 HP at 3750 RPM, 650 N⋅m at 1600 RPM | 36.88 lbf⋅ft |
Audi gasoline V8 4.2 L BFM 330 HP at 6500 RPM, 430 N⋅m at 3500 RPM | 36.88 lbf⋅ft |
All other modifications | 22.13 lbf⋅ft |
Cap | 18.44 lbf⋅ft |
Otherwise | 9.59 lbf⋅ft |
Cap | 25.81 lbf⋅ft |
Otherwise | 7.38 lbf⋅ft |
Cap | 18.44 lbf⋅ft |
Otherwise | 33.19 lbf⋅ft |
Cap | 18.44 lbf⋅ft |
Otherwise | 33.19 lbf⋅ft |
Cap | 18.44 lbf⋅ft |
Otherwise | 16.23 lbf⋅ft |
Cap | 25.81 lbf⋅ft |
Otherwise | 6.64 lbf⋅ft |
Oil lines | 7.38 lbf⋅ft |
All Audi gasoline V8 3.7 L BFL engines | 25.08 lbf⋅ft |
All Audi gasoline V8 4.2 L BFM engines | 25.08 lbf⋅ft |
All Audi diesel V6 3.0 L BNG engines | 47.2 lbf⋅ft |
Property class 10.9 |
First stage | 22.13 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
All other modifications | 45.73 lbf⋅ft |
Property class 10.9 |
Oil sump top part | 33.19 lbf⋅ft |
First stage | 5.9 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
Gradually tighten screws crosswise. |
Oil sump top part | 11.06 lbf⋅ft |
Gradually tighten screws crosswise. |
Oil sump lower part | 6.64 lbf⋅ft |
Gradually tighten screws crosswise. | |
Oil sump top part | 11.8 lbf⋅ft |
Gradually tighten screws crosswise. |
Oil sump central section | 7.38 lbf⋅ft |
Gradually tighten screws crosswise. | |
Oil sump lower part | 7.38 lbf⋅ft |
Gradually tighten screws crosswise. | |
Oil sump top part | 11.06 lbf⋅ft |
Gradually tighten screws crosswise. |
At the gearbox | 47.94 lbf⋅ft |
M7 | 10.33 lbf⋅ft |
Gradually tighten screws crosswise. | |
M8 | 16.23 lbf⋅ft |
Oil sump lower part | 7.38 lbf⋅ft |
Gradually tighten screws crosswise. |
First stage | 5.9 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 5.9 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 7.38 lbf⋅ft |
Replace screws. | |
Second stage | 180° |
First stage | 5.9 lbf⋅ft |
Use new screws and tighten them crosswise. | |
Second stage | 90° |
First stage | 7.38 lbf⋅ft |
Use new screws and tighten them crosswise. | |
Second stage | 90° |
At the gearbox | 47.94 lbf⋅ft |
M7 | 10.33 lbf⋅ft |
Gradually tighten screws crosswise. | |
M8 | 16.23 lbf⋅ft |
Oil sump lower part | 7.38 lbf⋅ft |
Gradually tighten screws crosswise. |
At the gearbox | 33.19 lbf⋅ft |
M6 | 6.64 lbf⋅ft |
Tighten the screws in steps. | |
M8 | 14.75 lbf⋅ft |
Oil sump lower part | 6.64 lbf⋅ft |
Gradually tighten screws crosswise. |
Camshaft sensor | 7.38 lbf⋅ft |
Charge air pressure sensor | 7.38 lbf⋅ft |
All Audi diesel V8 3.9 L ASE engines | 13.28 lbf⋅ft |
All Audi diesel V8 4.1 L BMC engines | 12.54 lbf⋅ft |
All Audi diesel V8 4.1 L BVN engines | 12.54 lbf⋅ft |
Ceramic glow plug | 8.85 lbf⋅ft |
maximum torque | |
Metal glow plug | 12.54 lbf⋅ft |
Audi gasoline V8 3.7 L BFL 276 HP at 6000 RPM, 360 N⋅m at 3750 RPM | 36.88 lbf⋅ft |
Audi gasoline V8 4.2 L BFM 330 HP at 6500 RPM, 430 N⋅m at 3500 RPM | 36.88 lbf⋅ft |
All other modifications | 40.57 lbf⋅ft |
On the engine block | 29.5 lbf⋅ft |
Audi gasoline V8 3.7 L BFL 276 HP at 6000 RPM, 360 N⋅m at 3750 RPM | 29.5 lbf⋅ft |
At the subframe | 16.96 lbf⋅ft |
On engine bracket | 29.5 lbf⋅ft |
Audi gasoline V8 4.2 L BFM 330 HP at 6500 RPM, 430 N⋅m at 3500 RPM | 29.5 lbf⋅ft |
All other modifications | 16.96 lbf⋅ft |
M10 | 50.15 lbf⋅ft |
First stage | 110.63 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
Audi diesel V6 3.0 L ASB 229 HP | 31.72 lbf⋅ft |
Audi diesel V8 3.9 L ASE 271 HP at 3750 RPM, 650 N⋅m at 1800 RPM | 31.72 lbf⋅ft |
Audi gasoline V8 3.7 L BFL 276 HP at 6000 RPM, 360 N⋅m at 3750 RPM | 31.72 lbf⋅ft |
On the engine block | 30.98 lbf⋅ft |
M10 | 29.5 lbf⋅ft |
M8 | 16.96 lbf⋅ft |
Audi gasoline V8 4.2 L BFM 330 HP at 6500 RPM, 430 N⋅m at 3500 RPM | 31.72 lbf⋅ft |
All other modifications | 29.5 lbf⋅ft |
Audi diesel V6 3.0 L BNG 208 HP | 19.91 lbf⋅ft |
Replace nuts. Use hot screw paste. | |
Audi diesel V6 3.0 L ASB 229 HP | 19.91 lbf⋅ft |
Replace nuts. Use hot screw paste. | |
Audi diesel V8 4.1 L BVN 322 HP at 3750 RPM, 650 N⋅m at 1600 RPM | 18.44 lbf⋅ft |
Replace nuts. |
All other modifications | 18.44 lbf⋅ft |
Replace nuts. |
Audi diesel V6 3.0 L BNG 208 HP | 19.91 lbf⋅ft |
With catalytic converter | |
Audi diesel V6 3.0 L ASB 229 HP | 19.91 lbf⋅ft |
With catalytic converter | |
All other modifications | 18.44 lbf⋅ft |
Replace nuts. |
Nuts | 13.28 lbf⋅ft |
Screws | 16.23 lbf⋅ft |
Nuts | 13.28 lbf⋅ft |
Screws | 16.23 lbf⋅ft |
All other modifications | 18.44 lbf⋅ft |
Replace nuts. |
Clamps | 2.21 lbf⋅ft |
Otherwise | 1.11 lbf⋅ft |
Clamps | 2.21 lbf⋅ft |
Otherwise | 1.11 lbf⋅ft |
Clamps | 2.21 lbf⋅ft |
Otherwise | 1.11 lbf⋅ft |
Clamps | 2.21 lbf⋅ft |
Nuts | 1.11 lbf⋅ft |
All other modifications | 7.38 lbf⋅ft |
All Audi diesel V8 3.9 L ASE engines | 16.23 lbf⋅ft |
All Audi diesel V8 4.1 L BMC engines | 18.44 lbf⋅ft |
All Audi diesel V8 4.1 L BVN engines | 18.44 lbf⋅ft |
Spark plugs | 22.13 lbf⋅ft |
Audi diesel V8 3.9 L ASE 271 HP at 3750 RPM, 650 N⋅m at 1800 RPM | 30.98 lbf⋅ft |
M10 | 33.19 lbf⋅ft |
M12 | 47.94 lbf⋅ft |
Audi diesel V8 4.1 L BMC 315 HP | 30.98 lbf⋅ft |
Audi diesel V8 4.1 L BVN 322 HP at 3750 RPM, 650 N⋅m at 1600 RPM | 30.98 lbf⋅ft |
M10 | 33.19 lbf⋅ft |
M12 | 47.94 lbf⋅ft |
M10 | 47.94 lbf⋅ft |
Property class 10.9 | |
M12 | 33.19 lbf⋅ft |
All other modifications | 47.94 lbf⋅ft |
Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2005 Audi A8 Quattro user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.
Before doing any DIY service please check your insurance policy and Audi warranty policy for your region. In some regions DIY service may invalidate your warranty.
Table of Contents
- Air Conditioning Compressor Oil Capacity
- Air Conditioning Refrigerant Capacity
- Automatic Transmission Fluid Capacity
- Axle Oil Capacity
- Brake Fluid Capacity
- Cooling Fluid Capacity
- Engine Oil Capacity
- Fluid and Lubricant Specifications
- Gearbox Oil Capacity
- Brake System Specifications
- Chassis Specifications
- Cooling System Specifications
- Drive Belts Specifications
- Electrical System Specifications
- Emission
Conquer your fears and never give up!
DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Audi A8 Quattro service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.
Doing basic service for your 2005 Audi A8 Quattro you're not only saving money, but also also improving your technical skills and learning something new.
2005 Audi A8 Quattro generations
In 2005 Audi offered 2 generations of the A8 Quattro. Engine fastener tightening specifications may vary in different generations. Be sure that you are looking at the rigt modification.
Audi A8 Quattro D3 model years
logo_audi 2002logo_audi 2003logo_audi 2004-
logo_audi 2005