in your garage to make future searches easy.

Condition Value
expand_moreFront axle brake
expand_moreBleed valve
FNR 42 AL brake calipers 7.38 lbf⋅ft
expand_moreBrake line
At the brake hose 8.85 lbf⋅ft
At the brake caliper 14.01 lbf⋅ft
M10 8.85 lbf⋅ft
M12 8.85 lbf⋅ft
M14 11.8 lbf⋅ft
expand_moreFront axle brake caliper
FNR 42 AL brake calipers 22.13 lbf⋅ft
expand_moreFront axle brake caliper mounting support
FNR 42 AL brake calipers 140.14 lbf⋅ft
Clean the ribbing
Front axle brake disc 3.69 lbf⋅ft
Wheel speed sensor 6.64 lbf⋅ft
expand_moreFront axle steering
Lower steering column joint 22.13 lbf⋅ft
expand_moreSteering gear
expand_moreM10
First stage 36.88 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreM12
First stage 66.38 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreTrack rod end on stub axle
expand_moreScrews (M10)
Aluminium stub axle 33.19 lbf⋅ft
Replace nuts.
Steel stub axle 29.5 lbf⋅ft
Replace nuts.
expand_moreM8
Screws 3.69 lbf⋅ft
Replace screws.
Track rod end on track rod 40.57 lbf⋅ft
Track rod on steering gear 73.76 lbf⋅ft
expand_moreFront axle suspension
expand_moreSuspension strut bearing pedestal
On chassis 55.32 lbf⋅ft
Shock-absorber piston rod 36.88 lbf⋅ft
Replace nuts.
expand_moreSuspension strut
expand_moreAt the bearing pedestal
With air suspension 16.96 lbf⋅ft
Replace screws.
Otherwise 14.75 lbf⋅ft
Replace nuts.
expand_moreBottom
First stage 66.38 lbf⋅ft
Replace screws and nuts.
Second stage 90°
expand_moreWheel suspension
expand_moreFront axle drive shaft
At the gearbox 51.63 lbf⋅ft
Replace screws.
expand_moreCentral screws
First stage 147.51 lbf⋅ft
Use new screw.
Second stage 180°
expand_moreStabiliser mounting at the axle control arm
First stage 29.5 lbf⋅ft
Replace nuts.
Second stage 90°
expand_moreStabiliser mounting at the stabiliser
First stage 29.5 lbf⋅ft
Replace screws.
Second stage 90°
Stabilizer mounting at the subframe 18.44 lbf⋅ft
Support joint at the stub axle 81.13 lbf⋅ft
Replace nuts.
expand_moreLower front transverse control arm
expand_moreInside
First stage 51.63 lbf⋅ft
Replace screws and nuts.
Second stage 180°
Outside 81.13 lbf⋅ft
Replace nuts.
expand_moreLower rear transverse control arm
expand_moreInside
First stage 51.63 lbf⋅ft
Replace screws and nuts.
Second stage 180°
Outside 81.13 lbf⋅ft
Replace nuts.
expand_moreUpper front transverse control arm
expand_moreInside
First stage 36.88 lbf⋅ft
Replace screws and nuts.
Second stage 90°
Outside 33.19 lbf⋅ft
Replace screws and nuts.
expand_moreUpper rear transverse control arm
expand_moreInside
First stage 36.88 lbf⋅ft
Replace screws and nuts.
Second stage 90°
Outside 33.19 lbf⋅ft
Replace screws and nuts.
expand_moreWheel hub wheel bearing
expand_moreCentral screws
First stage 147.51 lbf⋅ft
Use new screw.
Second stage 180°
expand_moreWheel bearing unit
First stage 59 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreWheels and tires
expand_moreTire pressure sensors
Torx screws 2.95 lbf⋅ft
Replace the screw.
Union nuts 2.95 lbf⋅ft
Wheel attachment 88.51 lbf⋅ft

Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2006 Audi A6 S6 user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.

Before doing any DIY service please check your insurance policy and Audi warranty policy for your region. In some regions DIY service may invalidate your warranty.

Conquer your fears and never give up!

DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Audi A6 S6 service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.

Doing basic service for your 2006 Audi A6 S6 you're not only saving money, but also also improving your technical skills and learning something new.

Audi A6 S6 C6 model years

Units:
facebook twitter reddit linkedin messenger whatsapp telegram skype email chat