in your garage to make future searches easy.

Condition Value
expand_moreAxle drive
expand_moreDrive shaft heat protection plate
On rear axle differential 14.75 lbf⋅ft
expand_moreFront axle drive shaft
expand_moreAt the gearbox
M10 51.63 lbf⋅ft
Use new screws.
expand_moreCentral screws
First stage 147.51 lbf⋅ft
Use new screw.
Second stage 180°
Propeller shaft intermediate bearing 14.75 lbf⋅ft
expand_morePropeller shaft
First stage 22.13 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreRear axle drive flange
First stage 36.88 lbf⋅ft
Replace screws.
Second stage 180°
expand_moreRear axle drive shaft
expand_moreAt the gearbox
M10 51.63 lbf⋅ft
Use new screws.
expand_moreCentral screws
First stage 147.51 lbf⋅ft
Use new screw.
Second stage 180°
expand_moreDifferential
Front axle differential oil drain plug 7.38 lbf⋅ft
Front axle differential oil filler plug 19.91 lbf⋅ft
Rear axle automatic locking differential oil control screws 11.06 lbf⋅ft
Rear axle automatic locking differential oil drain plug 11.06 lbf⋅ft
expand_moreRear axle differential
M12 70.07 lbf⋅ft
expand_moreRear axle differential bracket
expand_moreAt the subframe
M12 70.07 lbf⋅ft
expand_moreOn axle
M10 40.57 lbf⋅ft
expand_moreGearbox
expand_moreGearbox flange connection at engine
expand_moreM10
First stage 11.06 lbf⋅ft
Second stage 90°
M10 × 50 screws 47.94 lbf⋅ft
expand_moreM12
First stage 22.13 lbf⋅ft
Second stage 90°
expand_moreTorque converter
M10 29.5 lbf⋅ft
M12 47.94 lbf⋅ft
M6 6.64 lbf⋅ft
M7 11.06 lbf⋅ft
M8 14.75 lbf⋅ft
expand_moreGearbox lubrication
expand_moreDistributor gearbox oil drain plug
0BK gearbox 8.85 lbf⋅ft
Replace screws.
expand_moreDistributor gearbox oil filler screws
0BK gearbox 19.91 lbf⋅ft
Replace screws.
Gear oil cooler lines 14.75 lbf⋅ft
expand_moreGearbox oil drain plug
0BK gearbox 8.85 lbf⋅ft
Replace screws.
expand_moreGearbox oil filler plug
0BK gearbox 22.13 lbf⋅ft
Replace screws.
expand_moreGearbox oil sump
First stage Screw in manually up to stop.
Replace screws.
Second stage 2.95 lbf⋅ft
Third stage 45°
Transmission-oil cooler 5.9 lbf⋅ft
expand_moreGearbox mounting
expand_moreGearbox cross support
M10 × 40 screws 51.63 lbf⋅ft
M10 × 55 screws 29.5 lbf⋅ft
expand_moreGearbox mounting
At the crossmember 14.75 lbf⋅ft
Otherwise 29.5 lbf⋅ft
expand_moreGearbox support
At the gearbox 29.5 lbf⋅ft
expand_moreTransfer case
expand_moreTransfer box onto transmission flange connection
First stage 2.21 lbf⋅ft
Second stage 7.38 lbf⋅ft
Third stage 90°

Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2020 Audi A6 RS6 Avant user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.

Before doing any DIY service please check your insurance policy and Audi warranty policy for your region. In some regions DIY service may invalidate your warranty.

Conquer your fears and never give up!

DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Audi A6 RS6 Avant service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.

Doing basic service for your 2020 Audi A6 RS6 Avant you're not only saving money, but also also improving your technical skills and learning something new.

Units:
facebook twitter reddit linkedin messenger whatsapp telegram skype email chat