2003 Audi A6 RS6 Avant C5 Engine Fastener Tightening Specifications
in your garage to make future searches easy.
Condition | Value |
---|
Intake manifold | 7.38 lbf⋅ft |
Tighten the screws cross-wise from inside to outside. |
Bottom | 16.96 lbf⋅ft |
Top | 7.38 lbf⋅ft |
Central screws | 16.23 lbf⋅ft |
Use screw-locking compound. |
Auxiliary drive belt tensioner | 31.72 lbf⋅ft |
Air-conditioning compressor | 16.23 lbf⋅ft |
Air-conditioning compressor bracket | 29.5 lbf⋅ft |
Air-conditioning compressor pressure line | 18.44 lbf⋅ft |
M10 | 33.19 lbf⋅ft |
M8 | 16.23 lbf⋅ft |
Servo pump pulley | 16.23 lbf⋅ft |
Servo steering pump | 16.23 lbf⋅ft |
Turbo charger | 36.88 lbf⋅ft |
Replace nuts. |
Coolant pump | 10.33 lbf⋅ft |
Property class 10.9 |
First stage | 3.69 lbf⋅ft |
Use new screws. | |
Second stage | 90° |
First stage | 22.13 lbf⋅ft |
Use new screws. See figure 1. | |
Second stage | 44.25 lbf⋅ft |
Third stage | 90° |
Fourth stage | 90° |
Valve cover | 7.38 lbf⋅ft |
Alternately, first inside and then outside |
First stage | 22.13 lbf⋅ft |
Use new screws. | |
Second stage | 90° |
First stage | 147.51 lbf⋅ft |
Use new screws. | |
Second stage | 90° |
Third stage | 90° |
Crankshaft pulley | 16.23 lbf⋅ft |
Engine block closure screws | 25.81 lbf⋅ft |
Oil sump top part |
First stage | 22.13 lbf⋅ft |
Use new screw. | |
Second stage | 90° |
Fourth stage | 16.23 lbf⋅ft |
Fifth stage | 90° |
First stage | Tighten by hand |
Replace screws and nuts. | |
Second stage | 25.81 lbf⋅ft |
Third stage | 90° |
Vibration damper | 16.23 lbf⋅ft |
First stage | 3.69 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
Camshaft drive belt deflection pulley | 33.19 lbf⋅ft |
Left | 40.57 lbf⋅ft |
Use new screw. | |
Right | 40.57 lbf⋅ft |
Use new screw. |
Drive belt tensioner device | 7.38 lbf⋅ft |
Oil pump drive chain tensioner | 7.38 lbf⋅ft |
Toothed belt guard | 7.38 lbf⋅ft |
Use screw-locking compound. | |
Toothed belt tensioning roller | 29.5 lbf⋅ft |
Oil cooler | 2.95 lbf⋅ft |
Oil drain plug | 36.88 lbf⋅ft |
M12 | 18.44 lbf⋅ft |
M14 | 25.81 lbf⋅ft |
M8 | 14.75 lbf⋅ft |
Screws | 7.38 lbf⋅ft |
Otherwise | 22.13 lbf⋅ft |
Oil pump chain wheel | 25.08 lbf⋅ft |
Oil sump top part | 47.94 lbf⋅ft |
Oil sump top part | 10.33 lbf⋅ft |
Oil sump top part | 16.23 lbf⋅ft |
Oil sump lower part | 7.38 lbf⋅ft |
Gradually tighten screws crosswise. |
Knock sensor | 14.75 lbf⋅ft |
Lambda sensor | 40.57 lbf⋅ft |
Engine mounting | 16.96 lbf⋅ft |
M10 | 29.5 lbf⋅ft |
M8 | 22.13 lbf⋅ft |
First stage | 44.25 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
Exhaust manifold | 18.44 lbf⋅ft |
Replace nuts. | |
Exhaust pipe | 36.88 lbf⋅ft |
Replace nuts. | |
Exhaust pipe bracket | 18.44 lbf⋅ft |
Fuel filter bracket | 10.62 lbf⋅in |
Spark plugs | 22.13 lbf⋅ft |
M10 | 33.19 lbf⋅ft |
M12 | 47.94 lbf⋅ft |
Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2003 Audi A6 RS6 Avant user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.
Before doing any DIY service please check your insurance policy and Audi warranty policy for your region. In some regions DIY service may invalidate your warranty.
Table of Contents
- Air Conditioning Compressor Oil Capacity
- Air Conditioning Refrigerant Capacity
- Automatic Transmission Fluid Capacity
- Axle Oil Capacity
- Brake Fluid Capacity
- Cooling Fluid Capacity
- Engine Oil Capacity
- Fluid and Lubricant Specifications
- Gearbox Oil Capacity
- Steering Fluid Capacity
- Brake System Specifications
- Chassis Specifications
- Cooling System Specifications
- Drive Belts Specifications
- Electrical System Specifications
- Emission
- Engine Fastener Tightening Specifications
- Front Suspension Fastener Tightening Specifications
- Rear Suspension Fastener Tightening Specifications
- Transmission Fastener Tightening Specifications
Conquer your fears and never give up!
DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Audi A6 RS6 Avant service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.
Doing basic service for your 2003 Audi A6 RS6 Avant you're not only saving money, but also also improving your technical skills and learning something new.