2016 Audi A6 Avant C7 facelift Rear Suspension Fastener Tightening Specifications
in your garage to make future searches easy.
Condition | Value |
---|
Parking brake servomotor | 8.85 lbf⋅ft |
Rear axle brake caliper | 25.81 lbf⋅ft |
Replace screws. |
First stage | 73.76 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
Rear axle brake disc | 7.38 lbf⋅ft |
At the brake caliper | 14.75 lbf⋅ft |
Rear axle brake line | 10.33 lbf⋅ft |
Rear axle wheel speed sensor | 6.64 lbf⋅ft |
At the subframe | 70.07 lbf⋅ft |
Replace screws and nuts. |
First stage | 66.38 lbf⋅ft |
Use new screw. | |
Second stage | 90° |
First stage | 36.88 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 110.63 lbf⋅ft |
Use new screw. | |
Second stage | 180° |
Rear axle shock absorber piston rod | 25.81 lbf⋅ft |
Replace nuts. |
On chassis | 36.88 lbf⋅ft |
Replace screws. | |
Otherwise | 90° |
0BC axle drive | 40.57 lbf⋅ft |
0BF axle drive | 40.57 lbf⋅ft |
0BF axle drive | 70.07 lbf⋅ft |
First stage | 84.82 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 18.44 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 29.5 lbf⋅ft |
Replace screws and nuts. | |
Second stage | 90° |
First stage | 51.63 lbf⋅ft |
Replace screws and nuts. | |
Second stage | 180° |
First stage | 51.63 lbf⋅ft |
Replace screws. | |
Second stage | 180° |
First stage | 88.51 lbf⋅ft |
Tighten only via the screw. | |
Second stage | 360° |
Replace screws and nuts. |
First stage | 51.63 lbf⋅ft |
Replace screws and nuts. | |
Second stage | 180° |
On stub axle | 70.07 lbf⋅ft |
Replace screws and nuts. |
First stage | 147.51 lbf⋅ft |
Use new screw. | |
Second stage | 180° |
First stage | 59 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 147.51 lbf⋅ft |
Use new screw. | |
Second stage | 180° |
First stage | 59 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 147.51 lbf⋅ft |
Use new screw. | |
Second stage | 180° |
Torx screws | 2.95 lbf⋅ft |
Replace the screw. | |
Union nuts | 2.95 lbf⋅ft |
Wheel attachment | 88.51 lbf⋅ft |
Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2016 Audi A6 Avant user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.
Before doing any DIY service please check your insurance policy and Audi warranty policy for your region. In some regions DIY service may invalidate your warranty.
Table of Contents
- Air Conditioning Compressor Oil Capacity
- Air Conditioning Refrigerant Capacity
- Automatic Transmission Fluid Capacity
- Brake Fluid Capacity
- Cooling Fluid Capacity
- Engine Oil Capacity
- Fluid and Lubricant Specifications
- Manual Transmission Oil Capacity
- Brake System Specifications
- Chassis Specifications
- Cooling System Specifications
- Electrical System Specifications
- Emission
- Engine Fastener Tightening Specifications
- Front Suspension Fastener Tightening Specifications
- Rear Suspension Fastener Tightening Specifications
- Transmission Fastener Tightening Specifications
Conquer your fears and never give up!
DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Audi A6 Avant service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.
Doing basic service for your 2016 Audi A6 Avant you're not only saving money, but also also improving your technical skills and learning something new.