in your garage to make future searches easy.

Condition Value
expand_moreAir intake system
expand_moreIntake manifold
expand_moreAll Audi diesel straight-4 2.0 L CNHA engines
First stage Screw in new screw(s) manually as
far as it goes.
Second stage 14.75 lbf⋅ft
Third stage 90°
expand_moreAll Audi diesel straight-4 2.0 L CSUD engines
First stage Screw in new screw(s) manually as
far as it goes.
Tighten new screws crosswise in inside-to-outside order.
Second stage 14.75 lbf⋅ft
Third stage 90°
expand_moreAll Audi diesel V6 3.0 L CTCB engines
First stage Screw in new screw(s) manually as
far as it goes.
Gradually tighten screws crosswise.
Second stage 3.69 lbf⋅ft
Third stage 6.64 lbf⋅ft
All other modifications 6.64 lbf⋅ft
Tighten new screws crosswise in inside-to-outside order.
expand_moreIntake manifold support
expand_moreAll Audi diesel straight-4 2.0 L CNHA engines
First stage Screw in screw manually up to stop.
Second stage 14.75 lbf⋅ft
expand_moreAll Audi diesel straight-4 2.0 L CSUD engines
First stage Screw in screw manually up to stop.
Second stage 14.75 lbf⋅ft
expand_moreAll other modifications
On intake manifold 7.38 lbf⋅ft
On the engine block 14.75 lbf⋅ft
expand_moreAuxiliary assemblies
expand_moreAuxiliary drive belt deflection pulley
All Audi gasoline straight-4 2.0 L CDNB engines 14.75 lbf⋅ft
All Audi gasoline V6 2.8 L CHVA engines 29.5 lbf⋅ft
All Audi diesel V6 3.0 L CLAB engines 16.96 lbf⋅ft
All Audi diesel V6 3.0 L CTCB engines 22.13 lbf⋅ft
Replace screws.
All Audi diesel V6 3.0 L CTCC engines 22.13 lbf⋅ft
Replace screws.
All Audi diesel V6 3.0 L CZVB engines 22.13 lbf⋅ft
Replace screws.
All Audi diesel V6 3.0 L CZVD engines 22.13 lbf⋅ft
Replace screws.
expand_moreAll other modifications
First stage 14.75 lbf⋅ft
Use new screw.
Second stage 90°
expand_moreAuxiliary drive belt tensioner
All Audi gasoline straight-4 2.0 L CDNB engines 29.5 lbf⋅ft
All Audi gasoline V6 2.8 L CHVA engines 29.5 lbf⋅ft
expand_moreAll Audi diesel V6 3.0 L CLAB engines
First stage 36.88 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreAll Audi diesel straight-4 2.0 L CNHA engines
First stage 14.75 lbf⋅ft
Second stage 90°
expand_moreAll Audi diesel straight-4 2.0 L CSUD engines
First stage 14.75 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreAll Audi diesel V6 3.0 L CTCB engines
First stage 36.88 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreAll Audi gasoline straight-4 1.8 L CYGA engines
First stage 5.9 lbf⋅ft
Second stage 45°
expand_moreAll Audi gasoline straight-4 2.0 L CYNB engines
First stage 5.9 lbf⋅ft
Replace screws.
Second stage 45°
expand_moreAll other modifications
First stage 14.75 lbf⋅ft
Use new screw.
Second stage 180°
expand_moreAir-conditioning compressor
expand_moreAll Audi diesel straight-4 2.0 L CSUD engines
expand_moreAluminium screws
First stage 5.9 lbf⋅ft
Replace screws.
Second stage 180°
Steel screws 18.44 lbf⋅ft
All other modifications 18.44 lbf⋅ft
expand_moreAir-conditioning compressor bracket
expand_moreAll Audi gasoline straight-4 2.0 L CDNB engines
First stage 14.75 lbf⋅ft
Replace screws.
Second stage 90°
All Audi diesel V6 3.0 L CLAB engines 29.5 lbf⋅ft
expand_moreAll Audi diesel V6 3.0 L CTCB engines
First stage 2.21 lbf⋅ft
Second stage 29.5 lbf⋅ft
Third stage 29.5 lbf⋅ft
Control tensioner
expand_moreAll other modifications
expand_moreM10 × 155 screws
First stage 29.5 lbf⋅ft
Replace screws.
Second stage 180°
expand_moreM10 × 40 screws
First stage 29.5 lbf⋅ft
Use new screw.
Second stage 60°
expand_moreM10 × 60 screws
First stage 29.5 lbf⋅ft
Replace screws.
Second stage 60°
expand_moreAir-conditioning compressor pressure line
expand_moreAll Audi gasoline V6 2.8 L CHVA engines
M8 18.44 lbf⋅ft
expand_moreAll other modifications
M6 6.64 lbf⋅ft
M8 18.44 lbf⋅ft
Alternator 14.75 lbf⋅ft
Alternator pulley 47.94 lbf⋅ft
expand_moreGenerator bracket
expand_moreAll Audi gasoline straight-4 2.0 L CDNB engines
First stage 14.75 lbf⋅ft
Replace screws.
Second stage 90°
All Audi diesel V6 3.0 L CLAB engines 29.5 lbf⋅ft
expand_moreAll Audi diesel straight-4 2.0 L CNHA engines
First stage Screw in screw manually up to stop.
Second stage 29.5 lbf⋅ft
expand_moreMedium screws at the bottom
Third stage 45°
expand_moreTop screws
Fourth stage 180°
expand_moreAll Audi diesel straight-4 2.0 L CSUD engines
Figure 1. Auxiliary assemblies, Generator bracket, Audi diesel straight-4 2.0 L CSUD.
Figure 1. Auxiliary assemblies, Generator bracket, Audi diesel straight-4 2.0 L CSUD.
First stage Screw in screw manually up to stop.
Tighten the screws evenly from inside to outside in several steps. See figure 1.
Second stage 29.5 lbf⋅ft
expand_moreScrews 4 and 5 (M10 × 115 and M10 × 175)
Third stage 180°
expand_moreScrews 1, 2, 3, 6, and 8 (M10 × 35)
First stage 45°
expand_moreAll Audi diesel V6 3.0 L CTCB engines
First stage 2.21 lbf⋅ft
Second stage 29.5 lbf⋅ft
Third stage 29.5 lbf⋅ft
Control tensioner
expand_moreAll other modifications
expand_moreM10 × 155 screws
First stage 29.5 lbf⋅ft
Replace screws.
Second stage 180°
expand_moreM10 × 40 screws
First stage 29.5 lbf⋅ft
Use new screw.
Second stage 60°
expand_moreM10 × 60 screws
First stage 29.5 lbf⋅ft
Replace screws.
Second stage 60°
expand_morePower steering pump bracket
expand_more2.0 TFSI with gasoline straight-4 2.0 L 177 HP at 4000 RPM, 320 N⋅m at 1500 RPM engine (2011.6–)
First stage 14.75 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreHydraulic lines at the servo-steering pump
expand_more2.0 TFSI with gasoline straight-4 2.0 L 177 HP at 4000 RPM, 320 N⋅m at 1500 RPM engine (2011.6–)
expand_moreM6
Screws 6.64 lbf⋅ft
Union nuts 28.03 lbf⋅ft
expand_moreServo pump pulley
2.0 TFSI with gasoline straight-4 2.0 L 177 HP at 4000 RPM, 320 N⋅m at 1500 RPM engine (2011.6–) 16.23 lbf⋅ft
expand_moreServo steering pump
2.0 TFSI with gasoline straight-4 2.0 L 177 HP at 4000 RPM, 320 N⋅m at 1500 RPM engine (2011.6–) 18.44 lbf⋅ft
expand_moreVacuum pump
All Audi gasoline straight-4 2.0 L CDNB engines 6.64 lbf⋅ft
expand_moreAll Audi gasoline straight-4 1.8 L CYGA engines
Support 4.43 lbf⋅ft
expand_moreCarburetion
expand_moreExhaust gas return cooler
expand_moreAll Audi diesel straight-4 2.0 L CNHA engines
expand_moreOn the engine block
First stage Screw in screw manually up to stop.
Use new seals.
Second stage 14.75 lbf⋅ft
expand_moreAll Audi diesel straight-4 2.0 L CSUD engines
First stage Screw in screw manually up to stop.
Second stage 14.75 lbf⋅ft
expand_moreThird stage
At the bracket 14.75 lbf⋅ft
All other modifications 6.64 lbf⋅ft
expand_moreExhaust gas return valve
All Audi diesel straight-4 2.0 L CNHA engines 14.75 lbf⋅ft
All Audi diesel straight-4 2.0 L CZJA engines 14.75 lbf⋅ft
All other modifications 6.64 lbf⋅ft
expand_moreExhaust recirculation pipe
First stage Screw in manually up to stop.
Use new parts.
Second stage 6.64 lbf⋅ft
Clamps 2.58 lbf⋅ft
expand_moreFuel-distributing pipe
All Audi gasoline V6 2.8 L CHVA engines 6.64 lbf⋅ft
All Audi diesel straight-4 2.0 L CNHA engines 14.75 lbf⋅ft
All Audi diesel straight-4 2.0 L CSUD engines 14.75 lbf⋅ft
All Audi gasoline straight-4 1.8 L CYGA engines 6.64 lbf⋅ft
All Audi gasoline straight-4 2.0 L CYNB engines 6.64 lbf⋅ft
All Audi gasoline straight-4 2.0 L CYPA engines 6.64 lbf⋅ft
All Audi diesel straight-4 2.0 L CZJA engines 14.75 lbf⋅ft
All other modifications 16.23 lbf⋅ft
expand_moreHigh-pressure line
All Audi diesel straight-4 2.0 L CNHA engines 20.65 lbf⋅ft
All Audi diesel straight-4 2.0 L CSUD engines 20.65 lbf⋅ft
All Audi gasoline straight-4 1.8 L CYGA engines 19.91 lbf⋅ft
All Audi gasoline straight-4 2.0 L CYNB engines 19.91 lbf⋅ft
oil lightly
All Audi gasoline straight-4 2.0 L CYPA engines 19.91 lbf⋅ft
oil lightly
All Audi diesel straight-4 2.0 L CZJA engines 20.65 lbf⋅ft
All other modifications 18.44 lbf⋅ft
expand_moreHigh-pressure pump
All Audi gasoline straight-4 2.0 L CDNB engines 14.75 lbf⋅ft
expand_moreAll Audi gasoline V6 2.8 L CHVA engines
First stage Screw in manually up to stop.
Replace screws.
Second stage 3.69 lbf⋅ft
Third stage 14.75 lbf⋅ft
All Audi diesel V6 3.0 L CLAB engines 16.23 lbf⋅ft
expand_moreAll Audi diesel straight-4 2.0 L CNHA engines
First stage 14.75 lbf⋅ft
Long screws 180°
expand_moreShort screws
Second stage 45°
expand_moreAll Audi diesel straight-4 2.0 L CSUD engines
expand_moreLong screws
First stage 14.75 lbf⋅ft
Replace screws.
Second stage 180°
expand_moreShort screws
First stage 14.75 lbf⋅ft
Replace screws.
Second stage 45°
All Audi diesel V6 3.0 L CTCB engines 16.23 lbf⋅ft
All Audi diesel V6 3.0 L CTCC engines 16.23 lbf⋅ft
expand_moreAll Audi gasoline straight-4 1.8 L CYGA engines
expand_moreM6
First stage 5.9 lbf⋅ft
Replace screws.
Second stage 90°
M8 14.75 lbf⋅ft
Replace screws.
expand_moreAll Audi gasoline straight-4 2.0 L CYNB engines
expand_moreM6
First stage 5.9 lbf⋅ft
Tighten the new screws evenly in several steps.
Second stage 90°
M8 14.75 lbf⋅ft
Replace screws.
All Audi diesel V6 3.0 L CZVB engines 16.23 lbf⋅ft
All Audi diesel V6 3.0 L CZVD engines 16.23 lbf⋅ft
expand_moreAll other modifications
expand_moreM8 × 28 screws
First stage 14.75 lbf⋅ft
Replace screws.
Second stage 45°
expand_moreM8 × 90 screws
First stage 14.75 lbf⋅ft
Replace screws.
Second stage 180°
expand_moreHigh-pressure pump pulley
expand_moreAll Audi diesel V6 3.0 L CLAB engines
Central nuts 51.63 lbf⋅ft
All Audi diesel straight-4 2.0 L CNHA engines 70.07 lbf⋅ft
All Audi diesel straight-4 2.0 L CSUD engines 70.07 lbf⋅ft
Replace nuts.
All Audi diesel V6 3.0 L CTCB engines 51.63 lbf⋅ft
Replace nuts.
All Audi diesel V6 3.0 L CTCC engines 51.63 lbf⋅ft
Replace nuts.
All Audi diesel straight-4 2.0 L CZJA engines 70.07 lbf⋅ft
All Audi diesel V6 3.0 L CZVB engines 51.63 lbf⋅ft
Replace nuts.
All Audi diesel V6 3.0 L CZVD engines 51.63 lbf⋅ft
Replace nuts.
expand_moreAll other modifications
Central nuts 70.07 lbf⋅ft
Wheel 14.75 lbf⋅ft
Replace screws.
Injection hoses 18.44 lbf⋅ft
expand_moreInjection nozzle (injector)
expand_moreAll Audi diesel V6 3.0 L CLAB engines
Retaining clamp 10.33 lbf⋅ft
expand_moreAll Audi diesel straight-4 2.0 L CNHA engines
First stage 1.48 lbf⋅ft
Use new screws.
Second stage 6.64 lbf⋅ft
Third stage 180°
expand_moreAll Audi diesel straight-4 2.0 L CSUD engines
First stage 1.48 lbf⋅ft
Replace screws.
Second stage 6.64 lbf⋅ft
Third stage 180°
expand_moreAll Audi diesel V6 3.0 L CTCB engines
First stage 4.43 lbf⋅ft
Use new screw.
Second stage 90°
expand_moreAll other modifications
expand_moreRetaining clamp
First stage 5.9 lbf⋅ft
Use new screw.
Second stage 180°
expand_morePressure tube connection
All Audi gasoline V6 2.8 L CHVA engines 19.91 lbf⋅ft
Replace components.
expand_moreAll Audi gasoline straight-4 1.8 L CYGA engines
On high-pressure pump 29.5 lbf⋅ft
Replace components.
On rail 29.5 lbf⋅ft
Replace components.
All other modifications 29.5 lbf⋅ft
Replace components.
expand_moreCharging
Charge air pipes 6.64 lbf⋅ft
expand_moreTurbo charger
expand_moreAll Audi diesel straight-4 2.0 L CSUD engines
First stage 8.11 lbf⋅ft
Tighten nuts and screws crosswise in inside-to-outside order.
Second stage 16.23 lbf⋅ft
Third stage 16.23 lbf⋅ft
Control tensioner
expand_moreAll Audi diesel V6 3.0 L CTCB engines
First stage Screw in manually up to stop.
Use hot screw paste
Second stage 6.64 lbf⋅ft
Third stage 90°
All other modifications 18.44 lbf⋅ft
Replace screws. Use hot screw paste.
expand_moreTurbocharger bracket
expand_moreAll Audi diesel straight-4 2.0 L CNHA engines
First stage Screw in new screw(s) manually as
far as it goes.
Second stage 14.75 lbf⋅ft
expand_moreAll Audi diesel straight-4 2.0 L CSUD engines
First stage 8.11 lbf⋅ft
Replace screws.
Second stage 16.23 lbf⋅ft
Third stage 16.23 lbf⋅ft
Control tensioner
All Audi gasoline straight-4 1.8 L CYGA engines 22.13 lbf⋅ft
expand_moreTurbocharger coolant feed line
All Audi gasoline straight-4 1.8 L CYGA engines 6.64 lbf⋅ft
expand_moreAll other modifications
At the turbocharger 18.44 lbf⋅ft
On the engine block 25.81 lbf⋅ft
expand_moreTurbocharger coolant return line
All Audi gasoline straight-4 1.8 L CYGA engines 6.64 lbf⋅ft
expand_moreAll other modifications
At the turbocharger 25.81 lbf⋅ft
On the engine block 18.44 lbf⋅ft
expand_moreTurbocharger oil feed line
expand_moreAll Audi diesel straight-4 2.0 L CNHA engines
At the turbocharger 16.23 lbf⋅ft
On the engine block 22.13 lbf⋅ft
expand_moreAll Audi diesel straight-4 2.0 L CSUD engines
At the turbocharger 16.23 lbf⋅ft
On the engine block 22.13 lbf⋅ft
Replace line.
expand_moreAll Audi gasoline straight-4 1.8 L CYGA engines
At the turbocharger 6.64 lbf⋅ft
expand_moreAll other modifications
At the turbocharger 11.06 lbf⋅ft
On the engine block 11.06 lbf⋅ft
expand_moreTurbocharger oil return line
expand_moreAll Audi diesel straight-4 2.0 L CNHA engines
At the turbocharger 10.33 lbf⋅ft
On the engine block 7.38 lbf⋅ft
expand_moreAll Audi diesel straight-4 2.0 L CSUD engines
At the turbocharger 10.33 lbf⋅ft
On the engine block 7.38 lbf⋅ft
Replace line.
expand_moreAll Audi gasoline straight-4 1.8 L CYGA engines
At the turbocharger 6.64 lbf⋅ft
On the engine block 18.44 lbf⋅ft
expand_moreAll other modifications
At the turbocharger 6.64 lbf⋅ft
On the engine block 6.64 lbf⋅ft
expand_moreCooling system
expand_moreCoolant pump
All Audi diesel straight-4 2.0 L CGLC engines 11.06 lbf⋅ft
All Audi diesel straight-4 2.0 L CGLD engines 11.06 lbf⋅ft
All Audi diesel straight-4 2.0 L CGLE engines 11.06 lbf⋅ft
All Audi diesel straight-4 2.0 L CMGB engines 11.06 lbf⋅ft
expand_moreAll Audi diesel straight-4 2.0 L CNHA engines
First stage 14.75 lbf⋅ft
Replace screws.
Second stage 45°
expand_moreAll Audi diesel straight-4 2.0 L CSUD engines
First stage 14.75 lbf⋅ft
Replace screws.
Second stage 45°
All Audi diesel straight-4 2.0 L CSUE engines 11.06 lbf⋅ft
expand_moreAll Audi diesel V6 3.0 L CTCB engines
expand_moreAluminium screws
First stage 2.21 lbf⋅ft
Second stage 90°
Steel screws 6.64 lbf⋅ft
All other modifications 6.64 lbf⋅ft
Gradually tighten screws crosswise.
expand_moreCoolant pump pulley
All Audi gasoline V6 2.8 L CHVA engines 14.75 lbf⋅ft
All other modifications 16.96 lbf⋅ft
expand_moreCoolant pump drive wheel
expand_more1.8 TFSI with gasoline straight-4 1.8 L 188 HP, 320 N⋅m at 1400 RPM engine (2014.9–)
First stage 7.38 lbf⋅ft
Use new screw. (left-hand thread)
Second stage 90°
Fan wheel 3.69 lbf⋅ft
expand_moreRadiator mounting
All Audi diesel straight-4 2.0 L CGLD engines 2.58 lbf⋅ft
All Audi diesel straight-4 2.0 L CNHA engines 2.58 lbf⋅ft
expand_moreAll Audi gasoline straight-4 2.0 L CYNB engines
Bottom 3.32 lbf⋅ft
All Audi diesel straight-4 2.0 L CZJA engines 2.58 lbf⋅ft
expand_moreAll other modifications
Bottom 3.69 lbf⋅ft
expand_moreCylinder head
expand_moreCamshaft bearing
expand_moreAll Audi gasoline V6 2.8 L CHVA engines
Figure 2. Cylinder head, Camshaft bearing, Audi gasoline V6 2.8 L CHVA.
Figure 2. Cylinder head, Camshaft bearing, Audi gasoline V6 2.8 L CHVA.
First stage Screw in screw(s) by hand.
See figure 2.
Second stage 5.9 lbf⋅ft
Third stage 90°
expand_moreAll Audi diesel V6 3.0 L CLAB engines
Figure 3. Cylinder head, Camshaft bearing, Audi diesel V6 3.0 L CLAB.
Figure 3. Cylinder head, Camshaft bearing, Audi diesel V6 3.0 L CLAB.
First stage Screw in screw(s) by hand.
Note correct order of tensioning. See figure 3.
Second stage 6.64 lbf⋅ft
expand_moreAll Audi diesel straight-4 2.0 L CNHA engines
Figure 4. Cylinder head, Camshaft bearing, Audi diesel straight-4 2.0 L CNHA.
Figure 4. Cylinder head, Camshaft bearing, Audi diesel straight-4 2.0 L CNHA.
First stage Tighten bolt(s) until hand-tight.
See figure 4.
Second stage 5.9 lbf⋅ft
expand_moreAll Audi diesel straight-4 2.0 L CSUD engines
First stage Tighten bolt(s) until hand-tight.
See figure 4.
Second stage 5.9 lbf⋅ft
expand_moreAll Audi diesel V6 3.0 L CTCB engines
expand_moreLeft cylinder head
Figure 5. Cylinder head, Camshaft bearing, Audi diesel V6 3.0 L CTCB, Left cylinder head.
Figure 5. Cylinder head, Camshaft bearing, Audi diesel V6 3.0 L CTCB, Left cylinder head.
First stage Tighten bolt(s) until hand-tight.
See figure 5.
Second stage 6.64 lbf⋅ft
expand_moreRight cylinder head
First stage Screw in screw(s) by hand.
See figure 5.
Second stage 6.64 lbf⋅ft
expand_moreAll Audi gasoline straight-4 1.8 L CYGA engines
Figure 6. Cylinder head, Camshaft bearing, Audi gasoline straight-4 1.8 L CYGA.
Figure 6. Cylinder head, Camshaft bearing, Audi gasoline straight-4 1.8 L CYGA.
First stage Tighten bolt(s) until hand-tight.
See figure 6.
Second stage 5.9 lbf⋅ft
Third stage 90°
expand_moreAll other modifications
Figure 7. Cylinder head, Camshaft bearing, All other modifications.
Figure 7. Cylinder head, Camshaft bearing, All other modifications.
First stage Screw in screw(s) by hand.
Note correct order of tensioning. See figure 7.
Second stage 7.38 lbf⋅ft
expand_moreCylinder head screws
expand_moreAll Audi gasoline straight-4 2.0 L CDNB engines
expand_moreScrews 1 – 8
Figure 8. Cylinder head, Cylinder head screws, Audi gasoline straight-4 2.0 L CDNB, Screws 1 – 8.
Figure 8. Cylinder head, Cylinder head screws, Audi gasoline straight-4 2.0 L CDNB, Screws 1 – 8.
First stage 29.5 lbf⋅ft
Replace screws. See figure 8.
Second stage 90°
Third stage 90°
expand_moreScrews 11 – 14
expand_moreFourth stage
First step 5.9 lbf⋅ft
Replace screws.
Second step 90°
expand_moreScrews 9 – 10
Fifth stage 29.5 lbf⋅ft
Replace screws.
Sixth stage 90°
Seventh stage 90°
expand_moreAll Audi gasoline V6 2.8 L CHVA engines
expand_moreScrews 1 – 7
First stage 29.5 lbf⋅ft
Replace screws.
Second stage 90°
Third stage 90°
expand_moreScrew 8
Fourth stage 29.5 lbf⋅ft
Replace screws.
Fifth stage 90°
Sixth stage 90°
expand_moreScrew 9
expand_moreSeventh stage
First step 2.21 lbf⋅ft
Replace screws.
Second step 180°
expand_moreWithout recess (screws 1 – 8)
Figure 9. Cylinder head, Cylinder head screws, Audi gasoline V6 2.8 L CHVA, Without recess (screws 1 – 8).
Figure 9. Cylinder head, Cylinder head screws, Audi gasoline V6 2.8 L CHVA, Without recess (screws 1 – 8).
First stage 29.5 lbf⋅ft
Replace screws. See figure 9.
Second stage 90°
Third stage 90°
expand_moreWithout recess (screw 9)
expand_moreFourth stage
First step 2.21 lbf⋅ft
Replace screws.
Second step 180°
expand_moreAll Audi diesel V6 3.0 L CLAB engines
Figure 10. Cylinder head, Cylinder head screws, Audi diesel V6 3.0 L CLAB.
Figure 10. Cylinder head, Cylinder head screws, Audi diesel V6 3.0 L CLAB.
First stage Tighten by hand
Replace screws. See figure 10.
Second stage 25.81 lbf⋅ft
Third stage 51.63 lbf⋅ft
Fourth stage 90°
Fifth stage 90°
expand_moreAll Audi diesel straight-4 2.0 L CNHA engines
Figure 11. Cylinder head, Cylinder head screws, Audi diesel straight-4 2.0 L CNHA.
Figure 11. Cylinder head, Cylinder head screws, Audi diesel straight-4 2.0 L CNHA.
First stage 22.13 lbf⋅ft
Replace screws. See figure 11.
Second stage 47.94 lbf⋅ft
Third stage 90°
Fourth stage 90°
expand_moreAll Audi diesel straight-4 2.0 L CSUD engines
First stage 22.13 lbf⋅ft
Replace screws. See figure 11.
Second stage 47.94 lbf⋅ft
Third stage 90°
Fourth stage 90°
expand_moreAll Audi diesel V6 3.0 L CTCB engines
Figure 12. Cylinder head, Cylinder head screws, Audi diesel V6 3.0 L CTCB.
Figure 12. Cylinder head, Cylinder head screws, Audi diesel V6 3.0 L CTCB.
First stage Screw in screw(s) by hand.
Replace screws. See figure 12.
Second stage 25.81 lbf⋅ft
Third stage 36.88 lbf⋅ft
Fourth stage 90°
Fifth stage 90°
Sixth stage 90°
expand_moreAll Audi gasoline straight-4 1.8 L CYGA engines
expand_moreScrews 1 – 10
Figure 13. Cylinder head, Cylinder head screws, Audi gasoline straight-4 1.8 L CYGA, Screws 1 – 10.
Figure 13. Cylinder head, Cylinder head screws, Audi gasoline straight-4 1.8 L CYGA, Screws 1 – 10.
First stage 29.5 lbf⋅ft
Replace screws. See figure 13.
Second stage 90°
Third stage 90°
expand_moreScrew 11
Fourth stage 2.95 lbf⋅ft
Fifth stage 90°
expand_moreAll other modifications
Figure 14. Cylinder head, Cylinder head screws, All other modifications.
Figure 14. Cylinder head, Cylinder head screws, All other modifications.
First stage 22.13 lbf⋅ft
Replace screws. See figure 14.
Second stage 36.88 lbf⋅ft
Third stage 90°
Fourth stage 90°
expand_moreValve cover
expand_moreAll Audi gasoline straight-4 2.0 L CDNB engines
expand_moreAt the cylinder head
expand_moreBearing casing
First stage 5.9 lbf⋅ft
Tighten new screws in inside-to-outside order.
Second stage 90°
expand_moreAll Audi diesel V6 3.0 L CLAB engines
Figure 15. Cylinder head, Valve cover, Audi diesel V6 3.0 L CLAB.
Figure 15. Cylinder head, Valve cover, Audi diesel V6 3.0 L CLAB.
First stage Screw in screw(s) by hand.
Replace screws. See figure 15.
expand_moreSecond stage
First step 5.9 lbf⋅ft
Second step 90°
expand_moreAll Audi diesel V6 3.0 L CTCB engines
First stage Screw in screw(s) by hand.
Tighten screws crosswise.
Second stage 6.64 lbf⋅ft
All other modifications 6.64 lbf⋅ft
Tighten gradually and alternately from inside to outside.
expand_moreEngine block
expand_moreBalance shaft gear wheel
expand_moreAll Audi gasoline straight-4 2.0 L CDNB engines
expand_moreCoolant pump
First stage 7.38 lbf⋅ft
Use new screw. (left-hand thread)
Second stage 90°
On the engine block 6.64 lbf⋅ft
expand_moreAll Audi gasoline V6 2.8 L CHVA engines
expand_moreSprocket wheel
First stage 22.13 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreAll Audi diesel V6 3.0 L CLAB engines
Central screws 44.25 lbf⋅ft
expand_moreCentral nuts
First stage 22.13 lbf⋅ft
Shaft must be replaced when the screw connection has been loosened.
Second stage 90°
Wheel 16.96 lbf⋅ft
All Audi diesel V6 3.0 L CTCB engines 16.96 lbf⋅ft
Replace screws.
All Audi diesel V6 3.0 L CTCC engines 16.96 lbf⋅ft
Replace screws.
All Audi diesel V6 3.0 L CZVB engines 16.96 lbf⋅ft
Replace screws.
All Audi diesel V6 3.0 L CZVD engines 16.96 lbf⋅ft
Replace screws.
expand_moreAll other modifications
First stage 14.75 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreBalance shaft module
expand_moreAll Audi gasoline straight-4 1.8 L CYGA engines
First stage 2.95 lbf⋅ft
Second stage 45°
expand_moreAll other modifications
expand_moreBalance weight
First stage 14.75 lbf⋅ft
Replace screws.
Second stage 90°
On the engine block 6.64 lbf⋅ft
Replace screws.
expand_moreConnecting rod bearing
expand_moreAll Audi gasoline straight-4 2.0 L CDNB engines
First stage 33.19 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreAll Audi diesel V6 3.0 L CLAB engines
First stage 25.81 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreAll Audi diesel straight-4 2.0 L CNHA engines
First stage 22.13 lbf⋅ft
Replace screws.
Second stage 90°
Oil screw head support and thread.
expand_moreAll Audi diesel V6 3.0 L CTCB engines
First stage 25.81 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreAll Audi gasoline straight-4 1.8 L CYGA engines
First stage 33.19 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreAll other modifications
First stage 22.13 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreCrankcase ventilation
All Audi gasoline V6 2.8 L CHVA engines 6.64 lbf⋅ft
expand_moreAll Audi gasoline straight-4 1.8 L CYGA engines
First stage Screw in screw(s) by hand
Tighten screws crosswise.
Second stage 6.64 lbf⋅ft
All Audi gasoline straight-4 2.0 L CYNB engines 6.64 lbf⋅ft
Tighten screws crosswise.
All Audi gasoline straight-4 2.0 L CYPA engines 6.64 lbf⋅ft
Tighten screws crosswise.
expand_moreCrankshaft central screws
expand_moreAll Audi gasoline straight-4 2.0 L CDNB engines
First stage 110.63 lbf⋅ft
Replace screws and oil sealing rings.
Second stage 90°
expand_moreAll Audi diesel straight-4 2.0 L CGLD engines
First stage 132.76 lbf⋅ft
Use new screw.
Second stage 90°
Third stage 45°
expand_moreAll Audi diesel straight-4 2.0 L CGLE engines
First stage 88.51 lbf⋅ft
Use new screw.
Second stage 90°
expand_moreAll Audi diesel straight-4 2.0 L CNHA engines
First stage 132.76 lbf⋅ft
Replace screws.
Second stage 90°
Oil screw head support and thread.
Third stage 45°
expand_moreAll Audi diesel straight-4 2.0 L CSUD engines
First stage 132.76 lbf⋅ft
Replace screws.
Second stage 90°
Third stage 45°
expand_moreAll other modifications
First stage 110.63 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreDrive plate
expand_moreOn crankshaft
First stage 44.25 lbf⋅ft
Replace screws.
Second stage 90°
Engine block closure screws 18.44 lbf⋅ft
expand_moreFlywheel
To drive plate 44.25 lbf⋅ft
Replace screws.
expand_moreMain bearing
expand_moreAll Audi gasoline straight-4 2.0 L CDNB engines
expand_moreCenter
expand_moreScrews
First stage 47.94 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreLateral-fitting screw
First stage 14.75 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreAll Audi gasoline V6 2.8 L CHVA engines
expand_moreScrews 1 – 16
First stage 36.88 lbf⋅ft
Use new screws.
Second stage 90°
expand_moreScrews 17 – 31
Third stage 14.75 lbf⋅ft
Replace screws.
Fourth stage 90°
expand_moreAll Audi diesel V6 3.0 L CLAB engines
Figure 16. Engine block, Main bearing, Audi diesel V6 3.0 L CLAB.
Figure 16. Engine block, Main bearing, Audi diesel V6 3.0 L CLAB.
First stage 22.13 lbf⋅ft
Replace screws. See figure 16.
expand_moreSecond stage
First step 36.88 lbf⋅ft
Second step 180°
All Audi diesel straight-4 2.0 L CNHA engines Component must not be knocked down.
All Audi diesel straight-4 2.0 L CSUD engines Component must not be knocked down.
expand_moreAll Audi diesel V6 3.0 L CTCB engines
First stage 22.13 lbf⋅ft
Replace screws. See figure 16.
Second stage 36.88 lbf⋅ft
Third stage 180°
expand_moreAll Audi gasoline straight-4 1.8 L CYGA engines
Figure 17. Engine block, Main bearing, Audi gasoline straight-4 1.8 L CYGA.
Figure 17. Engine block, Main bearing, Audi gasoline straight-4 1.8 L CYGA.
First stage Tighten by hand
Replace screws. See figure 17.
expand_moreScrews 1 – 10
Second stage 47.94 lbf⋅ft
Third stage 90°
expand_moreScrew 11
Fourth stage 11.06 lbf⋅ft
Fifth stage 90°
All Audi diesel straight-4 2.0 L CZJA engines Component must not be knocked down.
expand_moreAll other modifications
expand_moreBalance shaft module screws 1 – 6
Figure 18. Engine block, Main bearing, All other modifications, Balance shaft module screws 1 – 6.
Figure 18. Engine block, Main bearing, All other modifications, Balance shaft module screws 1 – 6.
First stage Screw in screw(s) by hand.
Replace screws. See figure 18.
Second stage 4.43 lbf⋅ft
Fifth stage 90°
expand_moreBalance shaft module screws 5 – 6
Third stage 9.59 lbf⋅ft
expand_moreBalance shaft module screws 1 – 4
Fourth stage 14.75 lbf⋅ft
expand_moreBearing cap
First stage 47.94 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreVibration damper
expand_moreAll Audi gasoline V6 2.8 L CHVA engines
First stage 14.75 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreAll Audi diesel V6 3.0 L CLAB engines
First stage 14.75 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreAll other modifications
First stage 7.38 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreEngine control
expand_moreBalance shaft timing chain guide rail
All Audi gasoline straight-4 2.0 L CDNB engines 14.75 lbf⋅ft
expand_moreAll Audi gasoline straight-4 1.8 L CYGA engines
Bearing screws 14.75 lbf⋅ft
expand_moreBalance shaft timing chain tension rail
All Audi gasoline straight-4 2.0 L CDNB engines 14.75 lbf⋅ft
expand_moreAll Audi gasoline straight-4 1.8 L CYGA engines
Bearing screws 14.75 lbf⋅ft
expand_moreBottom part of the control unit housing
expand_moreAll Audi gasoline straight-4 2.0 L CDNB engines
First stage 5.9 lbf⋅ft
Use new screws and tighten them crosswise.
Second stage 45°
expand_moreAll Audi gasoline V6 2.8 L CHVA engines
expand_moreScrews 1 – 9
Second stage 2.21 lbf⋅ft
Third stage 90°
expand_moreScrew 10
First stage 2.21 lbf⋅ft
Fourth stage 6.64 lbf⋅ft
expand_moreScrews 6 – 8
Fifth stage 5.9 lbf⋅ft
Sixth stage 90°
expand_moreScrew 9
Sixth stage 14.75 lbf⋅ft
Seventh stage 180°
expand_moreAll other modifications
Figure 19. Engine control, Bottom part of the control unit housing, All other modifications.
Figure 19. Engine control, Bottom part of the control unit housing, All other modifications.
First stage 5.9 lbf⋅ft
Note correct order of tensioning. See figure 19.
Second stage 45°
expand_moreCamshaft adjuster
expand_moreAll Audi gasoline straight-4 2.0 L CDNB engines
Bearing casing 6.64 lbf⋅ft
Cap 6.64 lbf⋅ft
Central screws 25.81 lbf⋅ft
Left-hand thread
expand_moreAll Audi gasoline V6 2.8 L CHVA engines
First stage 59 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreCamshaft drive belt deflection pulley
expand_moreAll Audi diesel straight-4 2.0 L CNHA engines
Screws 14.75 lbf⋅ft
Replace bolt.
Stud screws 11.06 lbf⋅ft
Replace the stud bolt.
Otherwise 14.75 lbf⋅ft
Replace nuts.
All Audi diesel straight-4 2.0 L CSUD engines 14.75 lbf⋅ft
Use new parts.
expand_moreAll other modifications
expand_moreM10
First stage 36.88 lbf⋅ft
Replace screws.
Second stage 90°
M8 14.75 lbf⋅ft
expand_moreCamshaft timing chain slip rail
All Audi gasoline straight-4 2.0 L CDNB engines 14.75 lbf⋅ft
expand_moreAll other modifications
First stage 3.69 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreCamshaft timing chain tensioner
All Audi gasoline straight-4 2.0 L CDNB engines 6.64 lbf⋅ft
expand_moreAll other modifications
First stage 3.69 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreCamshaft timing chain tensioning rail
2.0 TFSI with gasoline straight-4 2.0 L 177 HP at 4000 RPM, 320 N⋅m at 1500 RPM engine (2011.6–) 14.75 lbf⋅ft
expand_moreCamshaft timing gear
All Audi diesel V6 3.0 L CLAB engines 16.96 lbf⋅ft
expand_moreAll Audi diesel straight-4 2.0 L CNHA engines
Central screws 73.76 lbf⋅ft
Clamping screws 6.64 lbf⋅ft
expand_moreAll Audi diesel straight-4 2.0 L CSUD engines
Central camshaft screws 73.76 lbf⋅ft
Replace screws.
Otherwise 6.64 lbf⋅ft
expand_moreAll other modifications
Central screws 73.76 lbf⋅ft
Wheel 18.44 lbf⋅ft
expand_moreControl drive chain tensioner
All Audi gasoline straight-4 2.0 L CDNB engines 47.94 lbf⋅ft
expand_moreAll Audi gasoline straight-4 1.8 L CYGA engines
First stage 2.95 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreControl drive chain tensioning rail
All Audi gasoline straight-4 2.0 L CDNB engines 14.75 lbf⋅ft
expand_moreAll Audi gasoline straight-4 1.8 L CYGA engines
Bearing screws 14.75 lbf⋅ft
Replace screws.
expand_moreAll other modifications
First stage 3.69 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreControl drive sprocket wheel
expand_more2.8 FSI with gasoline V6 2.8 L 201 HP at 5250 RPM, 280 N⋅m at 3000 RPM engine (2011.5–2015.4)
expand_moreM10
First stage 22.13 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreM6
First stage 3.69 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreControl drive timing chain slip rail
All Audi gasoline straight-4 2.0 L CDNB engines 14.75 lbf⋅ft
expand_moreAll Audi gasoline V6 2.8 L CHVA engines
First stage 7.38 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreAll Audi gasoline straight-4 1.8 L CYGA engines
Bearing screws 14.75 lbf⋅ft
Replace screws.
expand_moreAll other modifications
First stage 3.69 lbf⋅ft
Replace screws.
Second stage 90°
Control unit for intake valve timing 25.81 lbf⋅ft
expand_moreDrive chain balance shaft tensioner
expand_moreAll Audi gasoline V6 2.8 L CHVA engines
First stage 11.06 lbf⋅ft
Replace screws.
Second stage 90°
All other modifications 62.69 lbf⋅ft
Inlet camshaft wheel 16.96 lbf⋅ft
Replace screws.
expand_moreIntermediate shaft chain sprocket
expand_moreAll Audi gasoline straight-4 2.0 L CDNB engines
First stage 7.38 lbf⋅ft
Replace the screws and sprocket wheel.
Second stage for freedom from play
expand_moreThird stage
First step 18.44 lbf⋅ft
Second step 90°
expand_moreAll Audi gasoline straight-4 1.8 L CYGA engines
First stage 7.38 lbf⋅ft
Replace screws.
Second stage 18.44 lbf⋅ft
Third stage 90°
expand_moreAll other modifications
First stage 66.38 lbf⋅ft
Replace the screws and sprocket wheel.
Second stage 90°
expand_moreOil pump drive chain tensioner
All Audi gasoline straight-4 2.0 L CDNB engines 6.64 lbf⋅ft
All Audi gasoline V6 2.8 L CHVA engines 14.75 lbf⋅ft
Replace screws.
All Audi gasoline straight-4 1.8 L CYGA engines 6.64 lbf⋅ft
All Audi gasoline straight-4 2.0 L CYNB engines 6.64 lbf⋅ft
All Audi gasoline straight-4 2.0 L CYPA engines 6.64 lbf⋅ft
expand_moreAll other modifications
First stage 3.69 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreOutlet camshaft wheel
expand_moreAll Audi gasoline straight-4 2.0 L CDNB engines
expand_moreCentral screws
First stage 14.75 lbf⋅ft
Replace screws.
Second stage 90°
All other modifications 16.96 lbf⋅ft
Replace screws.
expand_moreTension rail bearing screws
3.0 TDI with diesel V6 3.0 L 201 HP at 3750 RPM, 400 N⋅m at 1250 RPM engine (2011.5–) 16.96 lbf⋅ft
expand_moreTiming case cover
expand_moreAll Audi diesel V6 3.0 L CLAB engines
expand_moreScrews 1 – 4
Figure 20. Engine control, Timing case cover, Audi diesel V6 3.0 L CLAB, Screws 1 – 4.
Figure 20. Engine control, Timing case cover, Audi diesel V6 3.0 L CLAB, Screws 1 – 4.
First stage 6.64 lbf⋅ft
See figure 20.
expand_moreScrews 5 – 24
Second stage 2.21 lbf⋅ft
Replace screws.
Third stage 2.21 lbf⋅ft
Control tensioner
Fifth stage 90°
expand_moreScrews 5 – 10
Fourth stage 5.9 lbf⋅ft
expand_moreAll other modifications
First stage 1.48 lbf⋅ft
Second stage 5.9 lbf⋅ft
Third stage 90°
expand_moreTiming case cover first cylinder row
expand_moreAll Audi gasoline V6 2.8 L CHVA engines
First stage 3.69 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreAll Audi diesel V6 3.0 L CLAB engines
First stage 5.9 lbf⋅ft
Replace bolts and tighten crosswise.
Second stage 90°
expand_moreAll other modifications
First stage Screw in screw(s) by hand.
Second stage 5.9 lbf⋅ft
Third stage 5.9 lbf⋅ft
Control tensioner
Fourth stage 90°
expand_moreTiming case cover second cylinder row
expand_moreAll Audi gasoline V6 2.8 L CHVA engines
First stage 3.69 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreAll Audi diesel V6 3.0 L CLAB engines
First stage 5.9 lbf⋅ft
Replace bolts and tighten crosswise.
Second stage 90°
expand_moreAll other modifications
First stage Screw in screw(s) by hand.
Second stage 5.9 lbf⋅ft
Third stage 5.9 lbf⋅ft
Control tensioner
Fourth stage 90°
expand_moreToothed belt guard
expand_moreAll Audi gasoline straight-4 2.0 L CDNB engines
Coolant pump 6.64 lbf⋅ft
All Audi gasoline straight-4 1.8 L CYGA engines 6.64 lbf⋅ft
expand_moreAll Audi gasoline straight-4 2.0 L CYNB engines
Coolant pump 6.64 lbf⋅ft
expand_moreToothed belt guard at the bottom
All Audi diesel straight-4 2.0 L CNHA engines 8.85 lbf⋅ft
All Audi diesel straight-4 2.0 L CSUD engines 8.85 lbf⋅ft
All Audi diesel straight-4 2.0 L CZJA engines 8.85 lbf⋅ft
All other modifications 6.64 lbf⋅ft
expand_moreToothed belt guard at the top
All Audi diesel straight-4 2.0 L CNHA engines 8.85 lbf⋅ft
All Audi diesel straight-4 2.0 L CSUD engines 3.69 lbf⋅ft
All Audi diesel straight-4 2.0 L CZJA engines 8.85 lbf⋅ft
Toothed belt guard center 6.64 lbf⋅ft
expand_moreToothed belt tensioning roller
expand_moreAll Audi diesel straight-4 2.0 L CNHA engines
First stage 14.75 lbf⋅ft
Replace nuts.
Second stage 45°
Stud screws 11.06 lbf⋅ft
Replace the stud bolt.
expand_moreAll Audi diesel straight-4 2.0 L CSUD engines
First stage 14.75 lbf⋅ft
Replace nuts.
Second stage 45°
expand_moreAll other modifications
First stage 14.75 lbf⋅ft
Second stage 45°
Top part of control unit housing 6.64 lbf⋅ft
Tighten screws crosswise.
expand_moreEngine lubrication
expand_moreOil cooler
expand_moreAll Audi gasoline straight-4 2.0 L CDNB engines
Heat-exchanger on oil filter housing 16.96 lbf⋅ft
expand_moreAll Audi gasoline V6 2.8 L CHVA engines
First stage 2.21 lbf⋅ft
Second stage 90°
All Audi diesel V6 3.0 L CLAB engines 6.64 lbf⋅ft
All Audi diesel straight-4 2.0 L CNHA engines Component must not be knocked down.
All Audi diesel straight-4 2.0 L CSUD engines Component must not be knocked down.
expand_moreAll Audi diesel V6 3.0 L CTCB engines
First stage 1.48 lbf⋅ft
Gradually tighten screws crosswise.
Second stage 6.64 lbf⋅ft
expand_moreAll Audi gasoline straight-4 1.8 L CYGA engines
First stage 5.9 lbf⋅ft
Replace screws.
Second stage 45°
All Audi diesel straight-4 2.0 L CZJA engines Component must not be knocked down.
All other modifications 8.11 lbf⋅ft
expand_moreOil drain plug
Plastic oil sump Tighten screw up to the stop.
Replace sealing rings.
Sheet-steel sump 22.13 lbf⋅ft
Replace sealing rings.
expand_moreOil filter
All Audi gasoline straight-4 2.0 L CDNB engines 14.7517.7 lbf⋅ft
expand_moreAll Audi diesel V6 3.0 L CTCB engines
Oil filter cover 25.81 lbf⋅ft
Slightly oil sealing lips.
expand_moreAll other modifications
Oil filter cover 18.44 lbf⋅ft
expand_moreOil filter housing
All Audi gasoline V6 2.8 L CHVA engines 9.59 lbf⋅ft
expand_moreAll Audi diesel V6 3.0 L CLAB engines
Oil filter cover 25.81 lbf⋅ft
On the engine block 6.64 lbf⋅ft
expand_moreAll Audi diesel straight-4 2.0 L CNHA engines
First stage 14.75 lbf⋅ft
Use new screws and tighten them crosswise.
Second stage 90°
expand_moreAll Audi diesel straight-4 2.0 L CSUD engines
First stage 14.75 lbf⋅ft
Second stage 90°
All Audi diesel V6 3.0 L CTCB engines 6.64 lbf⋅ft
All Audi diesel V6 3.0 L CTCC engines 6.64 lbf⋅ft
expand_moreAll Audi gasoline straight-4 1.8 L CYGA engines
First stage Tighten by hand
Second stage 14.75 lbf⋅ft
Third stage 90°
expand_moreAll Audi gasoline straight-4 2.0 L CYNB engines
expand_moreOn the engine block
First stage Tighten by hand
Second stage 14.75 lbf⋅ft
Third stage 90°
All Audi diesel V6 3.0 L CZVB engines 6.64 lbf⋅ft
All Audi diesel V6 3.0 L CZVD engines 6.64 lbf⋅ft
expand_moreAll other modifications
Oil filter cover 18.44 lbf⋅ft
expand_moreOn the engine block
First stage 10.33 lbf⋅ft
Use new screws and tighten them crosswise.
Second stage 90°
expand_moreOil pressure sensor
expand_moreAll Audi diesel V6 3.0 L CTCB engines
First stage 2.21 lbf⋅ft
Replace sealing rings.
Second stage 90°
All other modifications 14.75 lbf⋅ft
expand_moreOil pump
All Audi gasoline straight-4 2.0 L CDNB engines 14.75 lbf⋅ft
All Audi gasoline V6 2.8 L CHVA engines 14.75 lbf⋅ft
expand_moreAll Audi diesel straight-4 2.0 L CNHA engines
First stage 8.85 lbf⋅ft
Replace screws.
Second stage 180°
expand_moreAll Audi diesel straight-4 2.0 L CSUD engines
First stage 8.85 lbf⋅ft
Second stage 180°
expand_moreAll Audi diesel V6 3.0 L CTCB engines
First stage Screw in screw(s) by hand
Replace screws.
Second stage 5.9 lbf⋅ft
Third stage 90°
expand_moreAll other modifications
First stage 5.9 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreOil pump chain wheel
expand_moreAll Audi gasoline V6 2.8 L CHVA engines
First stage 22.13 lbf⋅ft
Use new screw.
Second stage 90°
expand_moreAll other modifications
First stage 22.13 lbf⋅ft
Replace screws.
Second stage 45°
expand_moreOil sump
expand_moreAll Audi gasoline straight-4 2.0 L CDNB engines
expand_moreOil sump lower part
First stage 5.9 lbf⋅ft
Replace screws.
Second stage 45°
expand_moreOil sump top part
First stage 11.06 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreAll Audi gasoline V6 2.8 L CHVA engines
Oil sump lower part 14.75 lbf⋅ft
expand_moreOil sump top part
First stage 5.9 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreAll Audi diesel V6 3.0 L CLAB engines
Figure 21. Engine lubrication, Oil sump, Audi diesel V6 3.0 L CLAB.
Figure 21. Engine lubrication, Oil sump, Audi diesel V6 3.0 L CLAB.
expand_moreOil sump lower part
See figure 21.
First stage 2.21 lbf⋅ft
Replace screws.
Second stage 90°
Figure 22. Engine lubrication, Oil sump, Audi diesel V6 3.0 L CLAB.
Figure 22. Engine lubrication, Oil sump, Audi diesel V6 3.0 L CLAB.
expand_moreOil sump top part
See figure 22.
First stage 3.69 lbf⋅ft
Replace screws.
Second stage 90°
Locking screws 18.44 lbf⋅ft
TDC marking.
expand_moreAll Audi diesel straight-4 2.0 L CNHA engines
expand_moreAt the gearbox
Third stage 29.5 lbf⋅ft
expand_moreOn the engine block
First stage 3.69 lbf⋅ft
Second stage 9.59 lbf⋅ft
expand_moreAll Audi diesel straight-4 2.0 L CSUD engines
expand_moreScrews at the gearbox (M10 × 75)
Second stage 11.06 lbf⋅ft
Third stage 90°
expand_moreM8
Fourth stage 29.5 lbf⋅ft
expand_moreOn the engine block
First stage 3.69 lbf⋅ft
Gradually tighten screws crosswise.
Fourth stage 9.59 lbf⋅ft
expand_moreAll Audi diesel V6 3.0 L CTCB engines
expand_moreOil sump lower part
Figure 23. Engine lubrication, Oil sump, Audi diesel V6 3.0 L CTCB, Oil sump lower part.
Figure 23. Engine lubrication, Oil sump, Audi diesel V6 3.0 L CTCB, Oil sump lower part.
First stage 1.48 lbf⋅ft
See figure 23.
Second stage 2.21 lbf⋅ft
Third stage 45°
expand_moreOil sump top part
First stage 1.48 lbf⋅ft
Second stage 3.69 lbf⋅ft
Third stage 180°
expand_moreAll Audi gasoline straight-4 1.8 L CYGA engines
expand_moreOil sump top part
Figure 24. Engine lubrication, Oil sump, Audi gasoline straight-4 1.8 L CYGA, Oil sump top part.
Figure 24. Engine lubrication, Oil sump, Audi gasoline straight-4 1.8 L CYGA, Oil sump top part.
First stage 5.9 lbf⋅ft
Replace screws. See figure 24.
expand_moreScrews 1 – 2
Second stage 180°
expand_moreScrews 3 – 9
Third stage 45°
expand_moreScrew 10
Fourth stage 180°
expand_moreScrews 11 – 14
Fifth stage 90°
expand_moreOil sump lower part
expand_morePlastic oil sump
Figure 25. Engine lubrication, Oil sump, Audi gasoline straight-4 1.8 L CYGA, Oil sump lower part, Plastic oil sump.
Figure 25. Engine lubrication, Oil sump, Audi gasoline straight-4 1.8 L CYGA, Oil sump lower part, Plastic oil sump.
First stage 5.9 lbf⋅ft
See figure 25.
Second stage 90°
expand_moreSheet-steel sump
Figure 26. Engine lubrication, Oil sump, Audi gasoline straight-4 1.8 L CYGA, Oil sump lower part, Sheet-steel sump.
Figure 26. Engine lubrication, Oil sump, Audi gasoline straight-4 1.8 L CYGA, Oil sump lower part, Sheet-steel sump.
First stage 5.9 lbf⋅ft
See figure 26.
Second stage 90°
expand_moreAll other modifications
At the gearbox 29.5 lbf⋅ft
On the engine block 9.59 lbf⋅ft
expand_moreEngine management
expand_moreCamshaft sensor
All Audi diesel V6 3.0 L CTCB engines 5.53 lbf⋅ft
All Audi diesel V6 3.0 L CTCC engines 5.53 lbf⋅ft
All Audi diesel V6 3.0 L CZVB engines 5.53 lbf⋅ft
All Audi diesel V6 3.0 L CZVD engines 5.53 lbf⋅ft
All other modifications 6.64 lbf⋅ft
expand_moreCharge air pressure sensor
All Audi diesel straight-4 2.0 L CNHA engines 5.9 lbf⋅ft
All Audi diesel straight-4 2.0 L CSUD engines 5.9 lbf⋅ft
All Audi diesel V6 3.0 L CTCB engines 5.53 lbf⋅ft
All Audi diesel V6 3.0 L CTCC engines 5.53 lbf⋅ft
All Audi diesel straight-4 2.0 L CZJA engines 5.9 lbf⋅ft
All Audi diesel V6 3.0 L CZVB engines 5.53 lbf⋅ft
All Audi diesel V6 3.0 L CZVD engines 5.53 lbf⋅ft
All other modifications 3.69 lbf⋅ft
expand_moreCrankshaft sensor
All Audi gasoline straight-4 2.0 L CDNB engines 3.32 lbf⋅ft
All Audi diesel straight-4 2.0 L CGLC engines 3.32 lbf⋅ft
All Audi diesel straight-4 2.0 L CGLD engines 3.32 lbf⋅ft
All Audi diesel straight-4 2.0 L CGLE engines 3.32 lbf⋅ft
All Audi diesel straight-4 2.0 L CMGB engines 3.32 lbf⋅ft
All Audi diesel straight-4 2.0 L CNHA engines 3.32 lbf⋅ft
All Audi diesel straight-4 2.0 L CSUD engines 3.32 lbf⋅ft
All Audi diesel straight-4 2.0 L CSUE engines 3.32 lbf⋅ft
All Audi diesel straight-4 2.0 L CZJA engines 3.32 lbf⋅ft
All other modifications 6.64 lbf⋅ft
expand_moreExhaust gas temperature sensor
expand_moreAll Audi diesel straight-4 2.0 L CNHA engines
On exhaust manifold 33.19 lbf⋅ft
On particle filter 44.25 lbf⋅ft
expand_moreAll Audi diesel straight-4 2.0 L CSUD engines
Downstream of catalytic converter 44.25 lbf⋅ft
Use hot screw paste
Upstream of catalytic converter 33.19 lbf⋅ft
Use hot screw paste
All other modifications 33.19 lbf⋅ft
Use hot screw paste
expand_moreGlow plugs
expand_moreAll Audi diesel straight-4 2.0 L CNHA engines
With combustion chamber pressure sensor 8.85 lbf⋅ft
Without combustion chamber pressure sensor 12.54 lbf⋅ft
expand_moreAll Audi diesel straight-4 2.0 L CSUD engines
With combustion chamber pressure sensor 8.85 lbf⋅ft
Without combustion chamber pressure sensor 12.54 lbf⋅ft
All Audi diesel V6 3.0 L CTCB engines 8.85 lbf⋅ft
All Audi diesel V6 3.0 L CTCC engines 8.85 lbf⋅ft
All Audi diesel V6 3.0 L CZVB engines 8.85 lbf⋅ft
All Audi diesel V6 3.0 L CZVD engines 8.85 lbf⋅ft
All other modifications 12.54 lbf⋅ft
expand_moreKnock sensor
All Audi gasoline straight-4 2.0 L CDNB engines 14.75 lbf⋅ft
All Audi gasoline V6 2.8 L CHVA engines 18.44 lbf⋅ft
expand_moreAll Audi gasoline straight-4 1.8 L CYGA engines
First stage 5.9 lbf⋅ft
Second stage 90°
expand_moreAll other modifications
First stage 5.9 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreLambda sensor
All Audi diesel straight-4 2.0 L CSUD engines 44.25 lbf⋅ft
Use hot screw paste
All Audi gasoline straight-4 1.8 L CYGA engines 44.25 lbf⋅ft
Use hot screw paste
All Audi gasoline straight-4 2.0 L CYNB engines 44.25 lbf⋅ft
Use hot screw paste
All Audi gasoline straight-4 2.0 L CYPA engines 44.25 lbf⋅ft
Use hot screw paste
All other modifications 40.57 lbf⋅ft
Use hot screw paste
NOx sensor 40.57 lbf⋅ft
expand_moreEngine mounting
expand_moreEngine bracket
On the engine block 29.5 lbf⋅ft
expand_moreEngine mounting
At the subframe 40.57 lbf⋅ft
expand_moreOn engine bracket
First stage 66.38 lbf⋅ft
Use new screw.
Second stage 90°
expand_moreExtension cross support on subframe
On chassis 18.44 lbf⋅ft
Replace screws.
expand_moreSubframe
expand_moreAll Audi diesel straight-4 2.0 L CGLD engines
expand_moreM12 × 100 screws
First stage 84.82 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreAll Audi diesel straight-4 2.0 L CGLE engines
expand_moreM12 × 100 screws
First stage 84.82 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreAll other modifications
expand_moreM12 × 100 screws
First stage 84.82 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreM12 × 35 screws
First stage 66.38 lbf⋅ft
Replace screws.
Second stage 180°
expand_moreM12 × 55 screws
First stage 66.38 lbf⋅ft
Replace screws.
Second stage 180°
expand_moreSubframe diagonal strut
expand_moreM12 × 35 screws
First stage 66.38 lbf⋅ft
Use new screws.
Second stage 180°
expand_moreM12 × 55 screws
First stage 66.38 lbf⋅ft
Use new screws.
Second stage 180°
expand_moreTorque arm
expand_moreAll Audi diesel straight-4 2.0 L CNHA engines
On engine sump 18.44 lbf⋅ft
expand_moreAll other modifications
On engine sump 29.5 lbf⋅ft
expand_moreTorque support bracket
expand_moreAll Audi diesel straight-4 2.0 L CNHA engines
On chassis 29.5 lbf⋅ft
expand_moreAll other modifications
On chassis 18.44 lbf⋅ft
expand_moreExhaust system
expand_moreCatalytic converter
All Audi gasoline straight-4 2.0 L CDNB engines 29.5 lbf⋅ft
Replace the nuts and use fitting paste
All Audi gasoline V6 2.8 L CHVA engines 16.96 lbf⋅ft
All Audi gasoline straight-4 1.8 L CYGA engines 29.5 lbf⋅ft
Use hot screw paste
expand_moreAll Audi gasoline straight-4 2.0 L CYNB engines
At the turbocharger 29.5 lbf⋅ft
Replace nuts.
All other modifications 17.7 lbf⋅ft
Replace nuts. Use hot screw paste.
expand_moreCatalytic converter bracket
2.8 FSI with gasoline V6 2.8 L 201 HP at 5250 RPM, 280 N⋅m at 3000 RPM engine (2011.5–2015.4) 16.96 lbf⋅ft
expand_moreDiesel particulate filter
expand_moreAll Audi diesel straight-4 2.0 L CNHA engines
First stage 1.48 lbf⋅ft
Second stage 5.16 lbf⋅ft
expand_moreAll Audi diesel straight-4 2.0 L CSUD engines
expand_moreClamps
First stage 1.48 lbf⋅ft
Use new parts.
Second stage 5.16 lbf⋅ft
expand_moreAll Audi diesel V6 3.0 L CTCB engines
At the turbocharger 11.06 lbf⋅ft
Otherwise 16.96 lbf⋅ft
All other modifications 16.96 lbf⋅ft
Replace nuts.
Differential pressure sensor lines 33.19 lbf⋅ft
Use hot screw paste
expand_moreExhaust manifold
expand_moreAll Audi gasoline straight-4 2.0 L CDNB engines
expand_moreNuts
Bottom 22.13 lbf⋅ft
Replace nuts.
expand_moreTop nuts
First stage 3.69 lbf⋅ft
Replace nuts.
Second stage 8.85 lbf⋅ft
Tighten cross-wise.
Third stage 11.8 lbf⋅ft
Fourth stage 18.44 lbf⋅ft
expand_moreAll Audi diesel V6 3.0 L CLAB engines
At the cylinder head 18.44 lbf⋅ft
Replace nuts. Use hot screw paste.
expand_moreAt the turbocharger
First stage 22.13 lbf⋅ft
Replace screws. Use hot screw paste.
Second stage 90°
expand_moreAll Audi diesel straight-4 2.0 L CNHA engines
First stage 8.11 lbf⋅ft
Tighten screws from the inside outwards.
Second stage 16.23 lbf⋅ft
Third stage 16.23 lbf⋅ft
Control tensioner
expand_moreAll Audi diesel straight-4 2.0 L CSUD engines
First stage 8.11 lbf⋅ft
Tighten nuts and screws crosswise in inside-to-outside order.
Second stage 16.23 lbf⋅ft
Third stage 16.23 lbf⋅ft
Control tensioner
All other modifications 18.44 lbf⋅ft
Tighten new nuts evenly in several steps.
Exhaust manifold heat shields 7.388.85 lbf⋅ft
expand_moreExhaust pipe
expand_moreAll Audi gasoline straight-4 2.0 L CDNB engines
At the turbocharger 18.44 lbf⋅ft
Replace nuts.
Clamps 16.96 lbf⋅ft
All other modifications 16.96 lbf⋅ft
Replace screws and nuts.
Exhaust pipe bracket 16.96 lbf⋅ft
expand_moreExhaust pipe rear
expand_moreAll Audi gasoline straight-4 1.8 L CYGA engines
Clamps 29.5 lbf⋅ft
expand_moreAll other modifications
Clamps 16.96 lbf⋅ft
expand_moreParticle filter bracket
expand_moreAll Audi diesel straight-4 2.0 L CNHA engines
First stage 1.48 lbf⋅ft
Second stage 90°
slacken
Third stage 14.75 lbf⋅ft
expand_moreAll Audi diesel straight-4 2.0 L CSUD engines
First stage 1.48 lbf⋅ft
Replace screws.
Second stage 90°
slacken
Third stage 14.75 lbf⋅ft
expand_moreAll other modifications
First stage Screw in manually up to stop.
Second stage 6.64 lbf⋅ft
Primary catalytic converter 16.96 lbf⋅ft
Replace nuts.
expand_moreFuel supply
Fuel filter bracket 1.48 lbf⋅ft
Fuel pump 81.13 lbf⋅ft
expand_moreIgnition system
Spark plugs 22.13 lbf⋅ft
expand_moreStart system
expand_moreStarter
expand_moreAll Audi gasoline straight-4 2.0 L CDNB engines
M10 × 50 screws 47.94 lbf⋅ft
expand_moreAll Audi gasoline V6 2.8 L CHVA engines
M10 × 50 screws 47.94 lbf⋅ft
expand_moreM12 × 100 screws
First stage 22.13 lbf⋅ft
Reuse screws only 1 times.
Second stage 90°
expand_moreAll Audi diesel straight-4 2.0 L CNHA engines
M10 × 50 screws 47.94 lbf⋅ft
expand_moreAll Audi diesel straight-4 2.0 L CSUD engines
M10 × 50 screws 47.94 lbf⋅ft
expand_moreAll other modifications
M10 47.94 lbf⋅ft
expand_moreM12
First stage 22.13 lbf⋅ft
Second stage 90°

Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2014 Audi A6 Avant user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.

Before doing any DIY service please check your insurance policy and Audi warranty policy for your region. In some regions DIY service may invalidate your warranty.

Conquer your fears and never give up!

DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Audi A6 Avant service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.

Doing basic service for your 2014 Audi A6 Avant you're not only saving money, but also also improving your technical skills and learning something new.

2014 Audi A6 Avant generations

In 2014 Audi offered 2 generations of the A6 Avant. Engine fastener tightening specifications may vary in different generations. Be sure that you are looking at the rigt modification.

Audi A6 Avant C7 facelift model years

Units:
facebook twitter reddit linkedin messenger whatsapp telegram skype email chat