in your garage to make future searches easy.
Condition | Value |
---|
Parking brake servomotor | 8.85 lbf⋅ft |
Rear axle bleeder valve | 7.38 lbf⋅ft |
Rear axle brake caliper | 25.81 lbf⋅ft |
Replace screws. |
All Audi diesel straight-4 2.0 L CAHA engines | 103.26 lbf⋅ft |
Replace screws. |
Bottom | 84.82 lbf⋅ft |
Use special tool T 40065. |
Bottom | 84.82 lbf⋅ft |
Use special tool T 40066. |
Top | 103.26 lbf⋅ft |
Rear axle brake disc | 3.69 lbf⋅ft |
At the brake caliper | 8.85 lbf⋅ft |
Rear axle wheel speed sensor | 16.23 lbf⋅ft |
First stage | 62.69 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 62.69 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 110.63 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
Top | 25.81 lbf⋅ft |
First stage | 110.63 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
Top | 25.81 lbf⋅ft |
Rear axle shock absorber piston rod | 18.44 lbf⋅ft |
Rear axle stabilizer mounting | 18.44 lbf⋅ft |
Rear axle stabilizer support at the axle control arm | 47.94 lbf⋅ft |
Rear axle stabilizer support at the stabilizer | 47.94 lbf⋅ft |
Inside | 70.07 lbf⋅ft |
Replace nuts. |
First stage | 62.69 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 62.69 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 62.69 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
Outside | 70.07 lbf⋅ft |
Replace nuts. |
First stage | 59 lbf⋅ft |
Use new screws | |
Second stage | 90° |
Torx screws | 2.95 lbf⋅ft |
Replace the screw. | |
Union nuts | 2.95 lbf⋅ft |
Wheel attachment | 88.51 lbf⋅ft |
Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2008 Audi A6 Avant user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.
Before doing any DIY service please check your insurance policy and Audi warranty policy for your region. In some regions DIY service may invalidate your warranty.
Table of Contents
- Air Conditioning Compressor Oil Capacity
- Air Conditioning Refrigerant Capacity
- Automatic Transmission Fluid Capacity
- Axle Oil Capacity
- Brake Fluid Capacity
- Cooling Fluid Capacity
- Diagnostic Values
- Engine Oil Capacity
- Fluid and Lubricant Specifications
- Gearbox Oil Capacity
- Manual Transmission Oil Capacity
- Steering Fluid Capacity
- Brake System Specifications
- Chassis Specifications
- Cooling System Specifications
- Drive Belts Specifications
- Electrical System Specifications
- Emission
- Engine Fastener Tightening Specifications
- Front Suspension Fastener Tightening Specifications
- Rear Suspension Fastener Tightening Specifications
- Transmission Fastener Tightening Specifications
Conquer your fears and never give up!
DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Audi A6 Avant service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.
Doing basic service for your 2008 Audi A6 Avant you're not only saving money, but also also improving your technical skills and learning something new.
2008 Audi A6 Avant generations
In 2008 Audi offered 2 generations of the A6 Avant. Rear suspension fastener tightening specifications may vary in different generations. Be sure that you are looking at the rigt modification.