2008 Audi A6 Avant Quattro C6 facelift Transmission Fastener Tightening Specifications
in your garage to make future searches easy.
Condition | Value |
---|
Drive shaft heat protection plate | 18.44 lbf⋅ft |
At the gearbox | 51.63 lbf⋅ft |
Replace screws. |
First stage | 147.51 lbf⋅ft |
Use new screw. | |
Second stage | 180° |
Propeller shaft heat protection plate | 16.96 lbf⋅ft |
Propeller shaft intermediate bearing | 18.44 lbf⋅ft |
Propeller shaft | 40.57 lbf⋅ft |
Replace screws. |
At the gearbox | 51.63 lbf⋅ft |
Replace screws. |
First stage | 147.51 lbf⋅ft |
Use new screw. | |
Second stage | 180° |
Clutch master cylinder | 14.75 lbf⋅ft |
First stage | 16.23 lbf⋅ft |
Tighten screws clockwise in steps. | |
Second stage | 90° |
Replace screws. |
All other modifications | 16.23 lbf⋅ft |
Gradually tighten screws crosswise. |
Clutch slave cylinder | 18.44 lbf⋅ft |
Use new screw. |
09L gearbox | 25.81 lbf⋅ft |
Replace screws. |
At the subframe | 40.57 lbf⋅ft |
On axle | 29.5 lbf⋅ft |
0AR axle drive | 33.19 lbf⋅ft |
Oil filler screws. |
With manual transmission | 16.96 lbf⋅ft |
With Multitronic | 6.64 lbf⋅ft |
With Multitronic | 16.96 lbf⋅ft |
With manual transmission | 29.5 lbf⋅ft |
M10 | 33.19 lbf⋅ft |
M12 | 47.94 lbf⋅ft |
M10 | 47.94 lbf⋅ft |
M10 × 100 screws | 47.94 lbf⋅ft |
M10 × 80 screws | 33.19 lbf⋅ft |
M12 | 47.94 lbf⋅ft |
M10 | 33.19 lbf⋅ft |
M12 | 47.94 lbf⋅ft |
Torque converter | 62.69 lbf⋅ft |
Replace screws. |
09L gearbox | 25.81 lbf⋅ft |
Use new seal and screws. |
08V axle drive | 25.81 lbf⋅ft |
With Multitronic | 17.7 lbf⋅ft |
With manual transmission | 33.19 lbf⋅ft |
09L gearbox | 8.85 lbf⋅ft |
Use new seal and screws. |
09L gearbox | 8.85 lbf⋅ft |
Use new seal and screws. |
09L gearbox | 8.85 lbf⋅ft |
Use new seal and screws. |
01J Multitronic gearbox | 17.7 lbf⋅ft |
09L gearbox | 8.85 lbf⋅ft |
Use new seal and screws. |
With manual transmission | 33.19 lbf⋅ft |
0A3 gearbox | 29.5 lbf⋅ft |
09L gearbox | 59 lbf⋅ft |
Replace sealing rings. |
02X gearbox | 33.19 lbf⋅ft |
09L gearbox | 59 lbf⋅ft |
Replace sealing rings. |
02X gearbox | 33.19 lbf⋅ft |
0A2 gearbox | 29.5 lbf⋅ft |
09L gearbox | 59 lbf⋅ft |
Replace sealing rings. |
0A2 gearbox | 29.5 lbf⋅ft |
09L gearbox | 59 lbf⋅ft |
Replace sealing rings. |
02X gearbox | 33.19 lbf⋅ft |
09L gearbox | 59 lbf⋅ft |
Replace sealing rings. |
09L gearbox | 59 lbf⋅ft |
Replace sealing rings. |
With Multitronic | 14.75 lbf⋅ft |
With automatic gearbox | 59 lbf⋅ft |
With Multitronic | 14.75 lbf⋅ft |
With automatic gearbox | 59 lbf⋅ft |
08V axle drive | 25.81 lbf⋅ft |
With manual transmission | 33.19 lbf⋅ft |
0AR axle drive | 33.19 lbf⋅ft |
With manual transmission | 33.19 lbf⋅ft |
All Audi gasoline V8 4.2 L BVJ engines | 29.5 lbf⋅ft |
All other modifications | 36.88 lbf⋅ft |
Gearbox mounting | 16.96 lbf⋅ft |
At the gearbox bracket | 29.5 lbf⋅ft |
At the gearbox | 16.96 lbf⋅ft |
At the gearbox | 16.96 lbf⋅ft |
At the gearbox bracket | 29.5 lbf⋅ft |
At the gearbox | 16.96 lbf⋅ft |
At the gearbox | 16.96 lbf⋅ft |
At the gearbox | 16.96 lbf⋅ft |
On chassis | 36.88 lbf⋅ft |
At the gearbox bracket | 29.5 lbf⋅ft |
At the gearbox | 16.96 lbf⋅ft |
At the gearbox | 16.96 lbf⋅ft |
All other modifications | 16.96 lbf⋅ft |
At the gearbox |
Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2008 Audi A6 Avant Quattro user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.
Before doing any DIY service please check your insurance policy and Audi warranty policy for your region. In some regions DIY service may invalidate your warranty.
Table of Contents
- Air Conditioning Compressor Oil Capacity
- Air Conditioning Refrigerant Capacity
- Automatic Transmission Fluid Capacity
- Axle Oil Capacity
- Brake Fluid Capacity
- Cooling Fluid Capacity
- Engine Oil Capacity
- Fluid and Lubricant Specifications
- Gearbox Oil Capacity
- Manual Transmission Oil Capacity
- Steering Fluid Capacity
- Brake System Specifications
- Chassis Specifications
- Cooling System Specifications
- Drive Belts Specifications
- Electrical System Specifications
- Emission
- Engine Fastener Tightening Specifications
- Front Suspension Fastener Tightening Specifications
- Rear Suspension Fastener Tightening Specifications
- Transmission Fastener Tightening Specifications
Conquer your fears and never give up!
DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Audi A6 Avant Quattro service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.
Doing basic service for your 2008 Audi A6 Avant Quattro you're not only saving money, but also also improving your technical skills and learning something new.
2008 Audi A6 Avant Quattro generations
In 2008 Audi offered 2 generations of the A6 Avant Quattro. Transmission fastener tightening specifications may vary in different generations. Be sure that you are looking at the rigt modification.