2006 Audi A6 Allroad C6 Engine Fastener Tightening Specifications
in your garage to make future searches easy.
Condition | Value |
---|
Intake manifold | 6.64 lbf⋅ft |
from inside to outside |
All Audi gasoline V6 3.1 L AUK engines | 29.5 lbf⋅ft |
All other modifications | 16.96 lbf⋅ft |
Property class 10.9 |
All Audi gasoline V6 3.1 L AUK engines | 29.5 lbf⋅ft |
M8 | 16.96 lbf⋅ft |
First stage | 36.88 lbf⋅ft |
Use new screw. | |
Second stage | 90° |
First stage | 36.88 lbf⋅ft |
Use new screw. | |
Second stage | 90° |
First stage | 44.25 lbf⋅ft |
Use new screw. | |
Second stage | 90° |
M8 | 16.96 lbf⋅ft |
Air-conditioning compressor | 18.44 lbf⋅ft |
All Audi gasoline V6 3.1 L AUK engines | 14.75 lbf⋅ft |
All other modifications | 29.5 lbf⋅ft |
All Audi diesel V6 3.0 L ASB engines | 18.44 lbf⋅ft |
All Audi gasoline V6 3.1 L AUK engines | 18.44 lbf⋅ft |
All Audi diesel V6 2.7 L BPP engines | 18.44 lbf⋅ft |
Alternator | 16.96 lbf⋅ft |
Generator bracket | 29.5 lbf⋅ft |
Banjo screws | 36.88 lbf⋅ft |
Servo pump pulley | 16.23 lbf⋅ft |
All Audi gasoline V6 3.1 L AUK engines | 14.75 lbf⋅ft |
All Audi gasoline V8 4.2 L BVJ engines | 14.75 lbf⋅ft |
All other modifications | 16.96 lbf⋅ft |
Vacuum pump | 6.64 lbf⋅ft |
All other modifications | 16.96 lbf⋅ft |
High-pressure line | 18.44 lbf⋅ft |
All Audi diesel V6 3.0 L ASB engines | 16.23 lbf⋅ft |
BNG engine | 16.23 lbf⋅ft |
M6 | 6.64 lbf⋅ft |
M8 | 16.96 lbf⋅ft |
All Audi diesel V6 2.7 L BPP engines | 16.23 lbf⋅ft |
BSG engine | 16.23 lbf⋅ft |
M6 | 6.64 lbf⋅ft |
M8 | 16.96 lbf⋅ft |
M6 | 6.64 lbf⋅ft |
M8 | 16.96 lbf⋅ft |
High-pressure pump drive wheel | 55.32 lbf⋅ft |
High-pressure pump pulley | 51.63 lbf⋅ft |
Injection hoses | 18.44 lbf⋅ft |
Nuts | 3.69 lbf⋅ft |
Screws | 7.38 lbf⋅ft |
Tighten the screws in steps. |
Nuts | 7.38 lbf⋅ft |
Screws | 3.69 lbf⋅ft |
Charge air pipes | 3.69 lbf⋅ft |
First stage | 22.13 lbf⋅ft |
Replace screws. Use hot screw paste. | |
Second stage | 90° |
At the turbocharger | 11.06 lbf⋅ft |
Replace sealing rings. | |
On the engine block | 6.64 lbf⋅ft |
Replace sealing rings. |
At the turbocharger | 11.06 lbf⋅ft |
Replace sealing rings. | |
On the engine block | 6.64 lbf⋅ft |
Replace sealing rings. |
All other modifications | 11.06 lbf⋅ft |
Replace sealing rings. |
Turbocharger oil return line | 6.64 lbf⋅ft |
Replace sealing rings. |
Coolant pump | 6.64 lbf⋅ft |
All Audi gasoline V6 3.1 L AUK engines | 14.75 lbf⋅ft |
All other modifications | 16.96 lbf⋅ft |
All Audi gasoline V6 3.1 L AUK engines | 6.64 lbf⋅ft |
Tighten in steps from inside to outside. | |
All Audi gasoline V8 4.2 L BVJ engines | 5.9 lbf⋅ft |
First stage | Screw in screw(s) by hand. |
Note correct order of tensioning. See figure 1. | |
Second stage | 6.64 lbf⋅ft |
First stage | 29.5 lbf⋅ft |
Use new screws. See figure 2. | |
Second stage | 90° |
Third stage | 90° |
First stage | Tighten by hand |
Use new screws. See figure 3. | |
Second stage | 22.13 lbf⋅ft |
Third stage | 44.25 lbf⋅ft |
Fourth stage | 90° |
Fifth stage | 90° |
First step | 5.9 lbf⋅ft |
Second step | 90° |
Seventh stage | 25.81 lbf⋅ft |
Replace sealing rings. |
First stage | Screw in screw(s) by hand. |
Replace screws. See figure 4. | |
Second stage | 25.81 lbf⋅ft |
Third stage | 44.25 lbf⋅ft |
Fourth stage | 90° |
Fifth stage | 90° |
Cylinder head screws shank length (new) | 6.1 in |
Valve cover | 6.64 lbf⋅ft |
Gradually tighten screws crosswise. |
First stage | 11.06 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
Central screws | 44.25 lbf⋅ft |
Wheel | 16.96 lbf⋅ft |
First stage | 44.25 lbf⋅ft |
Replace and lightly oil the screws. | |
Second stage | 90° |
First stage | 22.13 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
All Audi gasoline V6 3.1 L AUK engines | 22.13 lbf⋅ft |
First stage | 11.06 lbf⋅ft |
Replace screws. | |
Second stage | 16.23 lbf⋅ft |
Third stage | 90° |
First stage | 22.13 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 44.25 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 44.25 lbf⋅ft |
Replace screws. | |
Second stage | 180° |
First stage | 44.25 lbf⋅ft |
Replace screws. | |
Second stage | 180° |
First stage | 44.25 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 44.25 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 44.25 lbf⋅ft |
Replace screws. | |
Second stage | 180° |
First stage | 36.88 lbf⋅ft |
Use new screws. | |
Second stage | 90° |
Alternately, first inside and then outside |
Third stage | 16.96 lbf⋅ft |
First stage | 22.13 lbf⋅ft |
Replace screws. See figure 5. |
First step | 36.88 lbf⋅ft |
Second step | 90° |
First stage | 11.06 lbf⋅ft |
Tighten the screws crosswise. | |
Second stage | 16.23 lbf⋅ft |
Replace screws. | |
Third stage | 90° |
First stage | 14.75 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
M6 | 6.64 lbf⋅ft |
M8 | 14.75 lbf⋅ft |
First stage | 3.69 lbf⋅ft |
Replace screws. | |
Second stage | 5.9 lbf⋅ft |
Third stage | 90° |
First stage | 5.9 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
M8 | 16.23 lbf⋅ft |
Tighten cross-wise. |
M6 | 6.64 lbf⋅ft |
M8 | 16.96 lbf⋅ft |
First stage | 3.69 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
All Audi gasoline V6 3.1 L AUK engines | 6.64 lbf⋅ft |
First stage | 3.69 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 3.69 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 59 lbf⋅ft |
Use new screws. | |
Second stage | 90° |
Sprocket wheel | 16.96 lbf⋅ft |
High pressure pump belt | 55.32 lbf⋅ft |
M6 | 6.64 lbf⋅ft |
tighten alternately | |
M8 | 16.23 lbf⋅ft |
First stage | 3.69 lbf⋅ft |
Use new screw. | |
Second stage | 90° |
First stage | 4.43 lbf⋅ft |
Use new screw. | |
Second stage | 45° |
First stage | 3.69 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
All other modifications | 8.85 lbf⋅ft |
First stage | 7.38 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
Use screw-locking compound. |
All other modifications | 8.85 lbf⋅ft |
First stage | 22.13 lbf⋅ft |
Use new screw. | |
Second stage | 90° |
First stage | 4.43 lbf⋅ft |
Use new screw. | |
Second stage | 60° |
Bearing pedestal | 6.64 lbf⋅ft |
First stage | 3.69 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
M10 | 33.19 lbf⋅ft |
First stage | 3.69 lbf⋅ft |
Use new screw. | |
Second stage | 90° |
Bearing pedestal | 6.64 lbf⋅ft |
Central screws | 33.19 lbf⋅ft |
First stage | 3.69 lbf⋅ft |
Use new screw. | |
Second stage | 90° |
Bearing pedestal | 6.64 lbf⋅ft |
First stage | 3.69 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
M10 | 33.19 lbf⋅ft |
First stage | 3.69 lbf⋅ft |
Use new screw. | |
Second stage | 90° |
First stage | 3.69 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
M10 | 33.19 lbf⋅ft |
First stage | 3.69 lbf⋅ft |
Use new screw. | |
Second stage | 90° |
First stage | 7.38 lbf⋅ft |
Replace screws. | |
Second stage | 30° |
First stage | 7.38 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
M6 × 30 screws | 6.64 lbf⋅ft |
M6 × 35 screws | 8.85 lbf⋅ft |
First stage | 3.69 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
M6 × 35 screws | 8.85 lbf⋅ft |
Bottom | 6.64 lbf⋅ft |
Top | 8.85 lbf⋅ft |
M6 × 30 screws | 6.64 lbf⋅ft |
M6 × 35 screws | 8.85 lbf⋅ft |
First stage | 3.69 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
M6 × 35 screws | 8.85 lbf⋅ft |
First stage | 7.38 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 3.69 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
M6 × 35 screws | 8.85 lbf⋅ft |
All other modifications | 6.64 lbf⋅ft |
High pressure pump belt deflection pulley | 16.96 lbf⋅ft |
High-pressure pump tension roller | 16.96 lbf⋅ft |
First stage | 59 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 4.43 lbf⋅ft |
Replace screws. | |
Second stage | 45° |
All other modifications | 6.64 lbf⋅ft |
First stage | 59 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
Tension rail bearing screws | 8.85 lbf⋅ft |
M6 | 6.64 lbf⋅ft |
M8 | 16.96 lbf⋅ft |
First stage | 3.69 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
All other modifications | 6.64 lbf⋅ft |
First stage | 3.69 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
All other modifications | 6.64 lbf⋅ft |
High pressure pump belt | 6.64 lbf⋅ft |
High pressure pump belt | 16.96 lbf⋅ft |
Replace screws. |
First stage | 3.69 lbf⋅ft |
Replace bolts. | |
Second stage | 90° |
All Audi gasoline V8 4.2 L BVJ engines | 6.64 lbf⋅ft |
Oil cooler | 6.64 lbf⋅ft |
M14 | 22.13 lbf⋅ft |
M24 | 36.88 lbf⋅ft |
CDYB engine | 22.13 lbf⋅ft |
M14 | 22.13 lbf⋅ft |
M24 | 36.88 lbf⋅ft |
M14 | 22.13 lbf⋅ft |
M24 | 36.88 lbf⋅ft |
CAND engine | 22.13 lbf⋅ft |
All Audi gasoline V8 4.2 L BVJ engines | 18.44 lbf⋅ft |
All other modifications | 22.13 lbf⋅ft |
Cap | 18.44 lbf⋅ft |
Otherwise | 9.59 lbf⋅ft |
All Audi gasoline V8 4.2 L BVJ engines | 18.44 lbf⋅ft |
Oil filter housing cap |
Oil filter cover | 25.81 lbf⋅ft |
On the engine block | 6.64 lbf⋅ft |
Banjo screws | 11.06 lbf⋅ft |
M6 | 6.64 lbf⋅ft |
All other modifications | 16.96 lbf⋅ft |
First stage | 22.13 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
Class 10.9 | 47.2 lbf⋅ft |
CDYB engine | 44.25 lbf⋅ft |
Class 10.9 | 47.2 lbf⋅ft |
Class 10.9 | 47.2 lbf⋅ft |
CAND engine | 44.25 lbf⋅ft |
All other modifications | 44.25 lbf⋅ft |
Oil sump lower part | 6.64 lbf⋅ft |
Gradually tighten screws crosswise. | |
Oil sump top part | 11.8 lbf⋅ft |
Gradually tighten screws crosswise. |
Oil sump top part | 33.19 lbf⋅ft |
Oil sump top part | 11.06 lbf⋅ft |
First stage | 5.9 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
Oil sump lower part | 6.64 lbf⋅ft |
First stage | 3.69 lbf⋅ft |
Tighten the screws crosswise. | |
Second stage | 10.33 lbf⋅ft |
Oil sump top part | 33.19 lbf⋅ft |
First stage | 5.9 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
Gradually tighten screws crosswise. |
Locking screws | 25.81 lbf⋅ft |
Oil sump top part | 11.06 lbf⋅ft |
Gradually tighten screws crosswise. |
Camshaft sensor | 6.64 lbf⋅ft |
Charge air pressure sensor | 3.69 lbf⋅ft |
Metal glow plug | 12.54 lbf⋅ft |
Knock sensor | 14.75 lbf⋅ft |
Lambda sensor | 40.57 lbf⋅ft |
Engine bracket | 29.5 lbf⋅ft |
Bearing casing | 55.32 lbf⋅ft |
On bearing casing | 29.5 lbf⋅ft |
On engine bracket | 29.5 lbf⋅ft |
First stage | 84.82 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
Subframe stiffening plate | 40.57 lbf⋅ft |
At the crossmember | 16.96 lbf⋅ft |
On the engine block | 29.5 lbf⋅ft |
All other modifications | 29.5 lbf⋅ft |
Torque support bracket | 29.5 lbf⋅ft |
All other modifications | 16.96 lbf⋅ft |
Use hot screw paste |
Diesel particulate filter | 16.96 lbf⋅ft |
All Audi diesel V6 3.0 L ASB engines | 18.44 lbf⋅ft |
Replace the nuts and use fitting paste | |
All Audi gasoline V6 3.1 L AUK engines | 18.44 lbf⋅ft |
Replace the nuts and use fitting paste | |
All Audi diesel V6 2.7 L BPP engines | 18.44 lbf⋅ft |
Replace the nuts and use fitting paste |
First stage | Tighten by hand |
Replace nuts. | |
Second stage | 14.75 lbf⋅ft |
Third stage | 22.13 lbf⋅ft |
At the cylinder head | 18.44 lbf⋅ft |
Replace nuts. Use hot screw paste. |
Exhaust pipe | 16.96 lbf⋅ft |
Replace nuts. | |
Exhaust pipe bracket | 16.96 lbf⋅ft |
At the turbocharger | 19.91 lbf⋅ft |
Replace nuts. Use hot screw paste. |
All Audi gasoline V6 3.1 L AUK engines | 10.62 lbf⋅in |
All other modifications | 5.9 lbf⋅ft |
Banjo screws | 18.44 lbf⋅ft |
Spark plugs | 22.13 lbf⋅ft |
Starter | 47.94 lbf⋅ft |
Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2006 Audi A6 Allroad user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.
Before doing any DIY service please check your insurance policy and Audi warranty policy for your region. In some regions DIY service may invalidate your warranty.
Table of Contents
- Air Conditioning Compressor Oil Capacity
- Air Conditioning Refrigerant Capacity
- Automatic Transmission Fluid Capacity
- Axle Oil Capacity
- Brake Fluid Capacity
- Cooling Fluid Capacity
- Engine Oil Capacity
- Fluid and Lubricant Specifications
- Gearbox Oil Capacity
- Manual Transmission Oil Capacity
- Steering Fluid Capacity
- Brake System Specifications
- Chassis Specifications
- Cooling System Specifications
- Drive Belts Specifications
- Electrical System Specifications
- Emission
- Engine Fastener Tightening Specifications
- Front Suspension Fastener Tightening Specifications
- Rear Suspension Fastener Tightening Specifications
- Transmission Fastener Tightening Specifications
Conquer your fears and never give up!
DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Audi A6 Allroad service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.
Doing basic service for your 2006 Audi A6 Allroad you're not only saving money, but also also improving your technical skills and learning something new.