in your garage to make future searches easy.

Condition Value
expand_moreAir intake system
expand_moreIntake manifold
All Audi diesel straight-4 2.0 L CGLC engines 2.95 lbf⋅ft
expand_moreAll Audi diesel straight-4 2.0 L CNHA engines
First stage Screw in new screw(s) manually as
far as it goes.
Second stage 14.75 lbf⋅ft
Third stage 90°
All other modifications 6.64 lbf⋅ft
Gradually tighten screws crosswise.
expand_moreIntake manifold support
expand_moreAll Audi gasoline straight-4 2.0 L CNCD engines
Nuts 7.38 lbf⋅ft
Screws 14.75 lbf⋅ft
expand_moreAll Audi diesel straight-4 2.0 L CNHA engines
First stage Screw in screw manually up to stop.
Second stage 14.75 lbf⋅ft
expand_moreAuxiliary assemblies
expand_moreAuxiliary drive belt deflection pulley
expand_moreAll Audi gasoline straight-4 1.8 L CABD engines
CABD engine 14.75 lbf⋅ft
expand_moreAll Audi diesel straight-4 2.0 L CAHB engines
First stage 14.75 lbf⋅ft
Replace screws.
Second stage 90°
All Audi gasoline V6 3.2 L CALA engines 29.5 lbf⋅ft
All Audi gasoline straight-4 1.8 L CDHB engines 14.75 lbf⋅ft
All Audi gasoline straight-4 2.0 L CDNB engines 14.75 lbf⋅ft
All Audi gasoline straight-4 2.0 L CDNC engines 14.75 lbf⋅ft
expand_moreAll Audi diesel straight-4 2.0 L CGLC engines
First stage 14.75 lbf⋅ft
Replace screws.
Second stage 90°
All Audi diesel straight-4 2.0 L CNHA engines 14.75 lbf⋅ft
All other modifications 16.96 lbf⋅ft
expand_moreAuxiliary drive belt tensioner
expand_moreAll Audi gasoline straight-4 1.8 L CABD engines
CABD engine 29.5 lbf⋅ft
expand_moreCJEB engine
First stage 5.9 lbf⋅ft
Second stage 45°
expand_moreAll Audi diesel straight-4 2.0 L CAHB engines
First stage 14.75 lbf⋅ft
Second stage 180°
All Audi gasoline V6 3.2 L CALA engines 29.5 lbf⋅ft
expand_moreAll Audi diesel V6 2.7 L CAMB engines
expand_moreM10
First stage 36.88 lbf⋅ft
Replace screws.
Second stage 90°
M8 16.96 lbf⋅ft
All Audi gasoline straight-4 1.8 L CDHB engines 29.5 lbf⋅ft
All Audi gasoline straight-4 2.0 L CDNB engines 29.5 lbf⋅ft
All Audi gasoline straight-4 2.0 L CDNC engines 29.5 lbf⋅ft
expand_moreAll Audi diesel straight-4 2.0 L CGLC engines
First stage 14.75 lbf⋅ft
Second stage 180°
expand_moreAll Audi diesel V6 3.0 L CLAB engines
First stage 36.88 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreAll Audi gasoline straight-4 2.0 L CNCD engines
First stage 5.9 lbf⋅ft
Replace screws.
Second stage 45°
expand_moreAll Audi diesel straight-4 2.0 L CNHA engines
First stage 14.75 lbf⋅ft
Second stage 90°
expand_moreAir-conditioning compressor
expand_moreAll Audi gasoline straight-4 2.0 L CNCD engines
expand_moreAluminium screws
First stage 5.9 lbf⋅ft
Replace screws.
Second stage 180°
Steel screws 18.44 lbf⋅ft
All other modifications 18.44 lbf⋅ft
expand_moreAir-conditioning compressor bracket
expand_moreAll Audi diesel straight-4 2.0 L CAHB engines
expand_moreM10 × 155 screws
First stage 29.5 lbf⋅ft
Replace screws.
Second stage 180°
expand_moreM10 × 40 screws
First stage 29.5 lbf⋅ft
Replace screws.
Second stage 60°
expand_moreM10 × 60 screws
First stage 29.5 lbf⋅ft
Replace screws.
Second stage 60°
expand_moreAll Audi diesel straight-4 2.0 L CGLC engines
expand_moreM10 × 155 screws
First stage 29.5 lbf⋅ft
Replace screws.
Second stage 180°
expand_moreM10 × 40 screws
First stage 29.5 lbf⋅ft
Replace screws.
Second stage 60°
expand_moreM10 × 60 screws
First stage 29.5 lbf⋅ft
Replace screws.
Second stage 60°
All Audi diesel V6 3.0 L CLAB engines 29.5 lbf⋅ft
expand_moreAll Audi gasoline straight-4 2.0 L CNCD engines
First stage Tighten bolt(s) until hand-tight.
Replace screws.
Second stage 14.75 lbf⋅ft
Third stage 90°
expand_moreAll other modifications
First stage 14.75 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreAir-conditioning compressor pressure line
M6 6.64 lbf⋅ft
M8 18.44 lbf⋅ft
expand_moreAlternator
expand_moreAll Audi gasoline straight-4 2.0 L CNCD engines
expand_moreAluminium screws
First stage 5.9 lbf⋅ft
Use new screws.
Second stage 180°
Steel screws 16.96 lbf⋅ft
All other modifications 16.96 lbf⋅ft
expand_moreGenerator bracket
expand_moreAll Audi diesel straight-4 2.0 L CAHB engines
expand_moreM10 × 155 screws
First stage 29.5 lbf⋅ft
Replace screws.
Second stage 180°
expand_moreM10 × 40 screws
First stage 29.5 lbf⋅ft
Replace screws.
Second stage 60°
expand_moreM10 × 60 screws
First stage 29.5 lbf⋅ft
Replace screws.
Second stage 60°
expand_moreAll Audi diesel straight-4 2.0 L CGLC engines
expand_moreM10 × 155 screws
First stage 29.5 lbf⋅ft
Replace screws.
Second stage 180°
expand_moreM10 × 40 screws
First stage 29.5 lbf⋅ft
Replace screws.
Second stage 60°
expand_moreM10 × 60 screws
First stage 29.5 lbf⋅ft
Replace screws.
Second stage 60°
All Audi diesel V6 3.0 L CLAB engines 29.5 lbf⋅ft
expand_moreAll Audi gasoline straight-4 2.0 L CNCD engines
First stage Tighten bolt(s) until hand-tight.
Replace screws.
Second stage 14.75 lbf⋅ft
Third stage 90°
expand_moreAll Audi diesel straight-4 2.0 L CNHA engines
First stage Screw in screw manually up to stop.
Second stage 29.5 lbf⋅ft
expand_moreMedium screws at the bottom
Third stage 45°
expand_moreTop screws
Fourth stage 180°
expand_moreAll other modifications
First stage 14.75 lbf⋅ft
Replace screws.
Second stage 90°
expand_morePower steering pump bracket
expand_moreAll Audi gasoline straight-4 1.8 L CDHB engines
First stage 14.75 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreAll Audi gasoline straight-4 2.0 L CDNB engines
First stage 14.75 lbf⋅ft
Replace screws.
Second stage 90°
All other modifications 18.44 lbf⋅ft
expand_moreHydraulic lines at the servo-steering pump
M6 6.64 lbf⋅ft
Union nuts 28.03 lbf⋅ft
Servo pump pulley 16.23 lbf⋅ft
Servo steering pump 18.44 lbf⋅ft
Vacuum pump 6.64 lbf⋅ft
2 pieces
expand_moreCarburetion
expand_moreExhaust gas return cooler
expand_more2.0 TDI with diesel straight-4 2.0 L 188 HP engine (2013.9–)
expand_moreOn the engine block
First stage Screw in screw manually up to stop.
Use new seals.
Second stage 14.75 lbf⋅ft
expand_moreExhaust gas return valve
2.0 TDI with diesel straight-4 2.0 L 188 HP engine (2013.9–) 14.75 lbf⋅ft
expand_moreFuel-distributing pipe
All Audi gasoline straight-4 1.8 L CABD engines 6.64 lbf⋅ft
All Audi gasoline V6 3.2 L CALA engines 6.64 lbf⋅ft
All Audi gasoline straight-4 1.8 L CJEB engines 6.64 lbf⋅ft
All Audi gasoline straight-4 2.0 L CNCD engines 6.64 lbf⋅ft
All Audi diesel straight-4 2.0 L CNHA engines 14.75 lbf⋅ft
All other modifications 16.23 lbf⋅ft
expand_moreHigh-pressure line
All Audi gasoline V6 3.2 L CALA engines 19.91 lbf⋅ft
All Audi diesel straight-4 2.0 L CGLC engines 18.44 lbf⋅ft
All Audi diesel V6 3.0 L CLAB engines 18.44 lbf⋅ft
expand_moreAll Audi gasoline straight-4 2.0 L CNCD engines
Union nuts 14.75 lbf⋅ft
All Audi diesel straight-4 2.0 L CNHA engines 20.65 lbf⋅ft
expand_moreAll other modifications
Union nuts 19.91 lbf⋅ft
expand_moreHigh-pressure pump
expand_moreAll Audi gasoline straight-4 1.8 L CABD engines
First stage 5.9 lbf⋅ft
Second stage 90°
All Audi gasoline V6 3.2 L CALA engines 6.64 lbf⋅ft
expand_moreAll Audi diesel straight-4 2.0 L CGLC engines
expand_moreM8 × 28 screws
First stage 14.75 lbf⋅ft
Replace screws.
Second stage 45°
expand_moreM8 × 90 screws
First stage 14.75 lbf⋅ft
Replace screws.
Second stage 180°
All Audi diesel V6 3.0 L CLAB engines 16.23 lbf⋅ft
All Audi gasoline straight-4 2.0 L CNCD engines 14.75 lbf⋅ft
expand_moreAll Audi diesel straight-4 2.0 L CNHA engines
First stage 14.75 lbf⋅ft
Long screws 180°
expand_moreShort screws
Second stage 45°
expand_moreAll other modifications
expand_moreM8 × 28 screws
First stage 14.75 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreM8 × 90 screws
First stage 14.75 lbf⋅ft
Replace screws.
Second stage 180°
expand_moreHigh-pressure pump pulley
All Audi diesel V6 2.7 L CAMA engines 51.63 lbf⋅ft
All Audi diesel V6 2.7 L CGKA engines 51.63 lbf⋅ft
expand_moreAll Audi diesel straight-4 2.0 L CGLC engines
Central nuts 70.07 lbf⋅ft
Screws 14.75 lbf⋅ft
Replace screws.
expand_moreAll Audi diesel V6 3.0 L CLAB engines
Central nuts 51.63 lbf⋅ft
All Audi diesel straight-4 2.0 L CNHA engines 70.07 lbf⋅ft
expand_moreAll other modifications
Central nuts 70.07 lbf⋅ft
Wheel 14.75 lbf⋅ft
Replace screws.
Injection hoses 18.44 lbf⋅ft
expand_moreInjection nozzle (injector)
expand_moreAll Audi diesel straight-4 2.0 L CGLC engines
First stage 5.9 lbf⋅ft
Replace screws.
Second stage 180°
expand_moreAll Audi diesel V6 3.0 L CLAB engines
Retaining clamp 10.33 lbf⋅ft
expand_moreAll Audi diesel straight-4 2.0 L CNHA engines
First stage 1.48 lbf⋅ft
Use new screws.
Second stage 6.64 lbf⋅ft
Third stage 180°
expand_moreAll other modifications
Nuts 7.38 lbf⋅ft
Screws 3.69 lbf⋅ft
expand_moreInjection pump
All Audi diesel straight-4 2.0 L CAHA engines 14.75 lbf⋅ft
expand_moreAll Audi diesel V6 2.7 L CAMA engines
M6 6.64 lbf⋅ft
M8 16.96 lbf⋅ft
expand_moreAll Audi gasoline straight-4 1.8 L CDHB engines
High-pressure pump 7.38 lbf⋅ft
Replace screws.
expand_moreAll other modifications
High-pressure pump 14.75 lbf⋅ft
expand_morePressure tube connection
All Audi gasoline straight-4 1.8 L CDHB engines 18.44 lbf⋅ft
expand_moreAll Audi gasoline straight-4 2.0 L CNCD engines
On high-pressure pump 29.5 lbf⋅ft
Replace components.
On rail 29.5 lbf⋅ft
Replace components.
All other modifications 29.5 lbf⋅ft
expand_moreCharging
expand_moreCharge air pipes
All Audi diesel V6 2.7 L CAMA engines 6.64 lbf⋅ft
All Audi diesel V6 2.7 L CGKA engines 6.64 lbf⋅ft
All Audi diesel straight-4 2.0 L CNHA engines 5.9 lbf⋅ft
expand_moreTurbo charger
expand_moreAll Audi gasoline straight-4 1.8 L CABD engines
CJEB engine 18.44 lbf⋅ft
Replace nuts.
All Audi diesel straight-4 2.0 L CGLC engines 17.7 lbf⋅ft
Replace nuts.
All Audi gasoline straight-4 2.0 L CNCD engines 18.44 lbf⋅ft
Replace screws. Use hot screw paste.
expand_moreAll other modifications
First stage 22.13 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreTurbocharger bracket
All Audi gasoline straight-4 2.0 L CNCD engines 22.13 lbf⋅ft
expand_moreAll Audi diesel straight-4 2.0 L CNHA engines
First stage Screw in new screw(s) manually as
far as it goes.
Second stage 14.75 lbf⋅ft
expand_moreTurbocharger coolant feed line
2.0 TFSI with gasoline straight-4 2.0 L 221 HP at 4500 RPM, 350 N⋅m at 1500 RPM engine (2013.5–) 6.64 lbf⋅ft
expand_moreTurbocharger coolant return line
2.0 TFSI with gasoline straight-4 2.0 L 221 HP at 4500 RPM, 350 N⋅m at 1500 RPM engine (2013.5–) 6.64 lbf⋅ft
expand_moreTurbocharger oil feed line
All Audi gasoline straight-4 2.0 L CNCD engines 6.64 lbf⋅ft
expand_moreAll Audi diesel straight-4 2.0 L CNHA engines
At the turbocharger 16.23 lbf⋅ft
On the engine block 22.13 lbf⋅ft
expand_moreTurbocharger oil return line
expand_moreAll Audi gasoline straight-4 2.0 L CNCD engines
M6 6.64 lbf⋅ft
M8 18.44 lbf⋅ft
expand_moreAll Audi diesel straight-4 2.0 L CNHA engines
At the turbocharger 10.33 lbf⋅ft
On the engine block 7.38 lbf⋅ft
expand_moreCooling system
expand_moreCoolant pump
All Audi diesel straight-4 2.0 L CAHA engines 11.06 lbf⋅ft
All Audi diesel straight-4 2.0 L CAHB engines 11.06 lbf⋅ft
All Audi diesel straight-4 2.0 L CGLC engines 11.06 lbf⋅ft
All Audi diesel straight-4 2.0 L CGLD engines 11.06 lbf⋅ft
expand_moreAll Audi diesel straight-4 2.0 L CNHA engines
First stage 14.75 lbf⋅ft
Replace screws.
Second stage 45°
All other modifications 6.64 lbf⋅ft
Gradually tighten screws crosswise.
expand_moreCoolant pump pulley
All Audi gasoline V6 3.2 L CALA engines 14.75 lbf⋅ft
All other modifications 16.96 lbf⋅ft
expand_moreCoolant pump drive wheel
expand_more2.0 TFSI with gasoline straight-4 2.0 L 221 HP at 4500 RPM, 350 N⋅m at 1500 RPM engine (2013.5–)
First stage 7.38 lbf⋅ft
Use new screw. (left-hand thread)
Second stage 90°
expand_moreFan wheel
All Audi gasoline straight-4 2.0 L CNCD engines 2.21 lbf⋅ft
All Audi diesel straight-4 2.0 L CNHA engines 3.69 lbf⋅ft
Radiator mounting 2.58 lbf⋅ft
expand_moreCylinder head
expand_moreCamshaft bearing
expand_moreAll Audi gasoline straight-4 1.8 L CABD engines
expand_moreBearing casing
First stage 5.9 lbf⋅ft
Tighten new screws in inside-to-outside order.
Second stage 90°
expand_moreAll Audi gasoline V6 3.2 L CALA engines
First stage Screw in screw(s) by hand.
Replace screws.
expand_moreSecond stage
First step 5.9 lbf⋅ft
Second step 90°
expand_moreAll Audi diesel V6 2.7 L CAMB engines
First stage Tighten by hand
Tighten gradually and alternately from inside to outside.
Second stage 6.64 lbf⋅ft
expand_moreAll Audi diesel V6 3.0 L CLAB engines
First stage Screw in screw(s) by hand.
Note correct order of tensioning.
Second stage 6.64 lbf⋅ft
expand_moreAll Audi gasoline straight-4 2.0 L CNCD engines
expand_moreBearing casing
First stage Tighten bolt(s) until hand-tight.
Replace screws.
Second stage 5.9 lbf⋅ft
Third stage 90°
expand_moreAll Audi diesel straight-4 2.0 L CNHA engines
First stage Tighten bolt(s) until hand-tight.
Second stage 5.9 lbf⋅ft
All other modifications 7.38 lbf⋅ft
Tighten gradually and alternately from inside to outside.
expand_moreCylinder head screws
expand_moreAll Audi gasoline straight-4 1.8 L CABD engines
expand_moreCABD engine
expand_moreScrews 1 – 10
First stage 29.5 lbf⋅ft
Replace screws.
Second stage 90°
Third stage 90°
expand_moreScrews 11 – 14
expand_moreFourth stage
First step 5.9 lbf⋅ft
Replace screws.
Second step 90°
expand_moreCJEB engine
expand_moreScrews 1 – 10
First stage 29.5 lbf⋅ft
Replace screws.
Second stage 90°
Third stage 90°
expand_moreScrew 11
expand_moreFourth stage
First step 5.9 lbf⋅ft
Replace screws.
Second step 90°
expand_moreAll Audi diesel straight-4 2.0 L CAHB engines
First stage 29.5 lbf⋅ft
Replace screws.
Second stage 44.25 lbf⋅ft
Third stage 90°
Fourth stage 90°
expand_moreAll Audi gasoline V6 3.2 L CALA engines
expand_moreScrews 1 – 7
First stage 29.5 lbf⋅ft
Replace screws.
Second stage 90°
Third stage 90°
expand_moreScrew 8
Fourth stage 29.5 lbf⋅ft
Replace screws.
Fifth stage 90°
Sixth stage 90°
expand_moreScrew 9
Seventh stage 6.64 lbf⋅ft
expand_moreAll Audi diesel V6 2.7 L CAMB engines
First stage 25.81 lbf⋅ft
Use new screws.
Second stage 44.25 lbf⋅ft
Third stage 90°
Fourth stage 90°
expand_moreAll Audi gasoline straight-4 1.8 L CDHB engines
expand_moreScrews 1 – 10
First stage 29.5 lbf⋅ft
Replace screws.
Second stage 90°
Third stage 90°
expand_moreScrews 11 – 14
expand_moreFourth stage
First step 5.9 lbf⋅ft
Replace screws.
Second step 90°
expand_moreAll Audi gasoline straight-4 2.0 L CDNB engines
expand_moreScrews 1 – 8
First stage 29.5 lbf⋅ft
Replace screws.
Second stage 90°
Third stage 90°
expand_moreScrews 11 – 14
expand_moreFourth stage
First step 5.9 lbf⋅ft
Replace screws.
Second step 90°
expand_moreScrews 9 – 10
Fifth stage 29.5 lbf⋅ft
Replace screws.
Sixth stage 90°
Seventh stage 90°
expand_moreAll Audi diesel straight-4 2.0 L CGLC engines
First stage 22.13 lbf⋅ft
Replace screws.
Second stage 36.88 lbf⋅ft
Third stage 90°
Fourth stage 90°
expand_moreAll Audi diesel V6 3.0 L CLAB engines
First stage Tighten by hand
Replace screws.
Second stage 25.81 lbf⋅ft
Third stage 51.63 lbf⋅ft
Fourth stage 90°
Fifth stage 90°
expand_moreAll Audi gasoline straight-4 2.0 L CNCD engines
expand_moreScrews 1 – 10
First stage 29.5 lbf⋅ft
Replace screws.
Second stage 90°
Third stage 90°
expand_moreScrew 11
Fourth stage 2.95 lbf⋅ft
Replace screws.
Fifth stage 90°
expand_moreAll Audi diesel straight-4 2.0 L CNHA engines
First stage 22.13 lbf⋅ft
Replace screws.
Second stage 47.94 lbf⋅ft
Third stage 90°
Fourth stage 90°
expand_moreCylinder head screws shank length (new)
All Audi diesel straight-4 2.0 L CAHA engines 5.39 in
All Audi diesel V6 2.7 L CAMA engines 6.1 in
All Audi diesel V6 2.7 L CGKA engines 6.1 in
expand_moreValve cover
expand_moreAll Audi gasoline straight-4 1.8 L CABD engines
expand_moreBearing casing
First stage 5.9 lbf⋅ft
Tighten new screws in inside-to-outside order.
Second stage 90°
expand_moreAll Audi diesel straight-4 2.0 L CAHB engines
First stage Tighten by hand
Tighten cross-wise.
Second stage 7.38 lbf⋅ft
expand_moreAll Audi gasoline straight-4 1.8 L CDHB engines
expand_moreAt the cylinder head
expand_moreBearing casing
First stage 5.9 lbf⋅ft
Tighten new screws in inside-to-outside order.
Second stage 90°
expand_moreAll Audi gasoline straight-4 2.0 L CDNB engines
expand_moreAt the cylinder head
expand_moreBearing casing
First stage 5.9 lbf⋅ft
Tighten new screws in inside-to-outside order.
Second stage 90°
expand_moreAll Audi diesel V6 3.0 L CLAB engines
First stage Screw in screw(s) by hand.
Replace screws.
expand_moreSecond stage
First step 5.9 lbf⋅ft
Second step 90°
All other modifications 6.64 lbf⋅ft
Tighten the screws cross-wise from inside to outside.
Valve cover locking screws 3.69 lbf⋅ft
expand_moreEngine block
expand_moreBalance shaft gear wheel
expand_moreAll Audi gasoline straight-4 1.8 L CABD engines
expand_moreCoolant pump
First stage 7.38 lbf⋅ft
Use new screw. (left-hand thread)
Second stage 90°
expand_moreAll Audi gasoline V6 3.2 L CALA engines
Central screws 44.25 lbf⋅ft
expand_moreWheel
First stage 11.06 lbf⋅ft
Replace screws.
Second stage 90°
All Audi diesel V6 2.7 L CAMA engines 16.96 lbf⋅ft
All Audi diesel V6 2.7 L CAMB engines 16.96 lbf⋅ft
expand_moreAll Audi gasoline straight-4 1.8 L CDHB engines
expand_moreCoolant pump
First stage 7.38 lbf⋅ft
Use new screw. (left-hand thread)
Second stage 90°
On the engine block 6.64 lbf⋅ft
expand_moreAll Audi gasoline straight-4 2.0 L CDNB engines
expand_moreCoolant pump
First stage 7.38 lbf⋅ft
Use new screw. (left-hand thread)
Second stage 90°
On the engine block 6.64 lbf⋅ft
All Audi diesel V6 2.7 L CGKA engines 16.96 lbf⋅ft
All Audi diesel V6 2.7 L CGKB engines 16.96 lbf⋅ft
expand_moreAll Audi diesel V6 3.0 L CLAB engines
Central screws 44.25 lbf⋅ft
expand_moreCentral nuts
First stage 22.13 lbf⋅ft
Shaft must be replaced when the screw connection has been loosened.
Second stage 90°
Wheel 16.96 lbf⋅ft
expand_moreAll Audi gasoline straight-4 2.0 L CNCD engines
expand_moreBearing casing
First stage 2.95 lbf⋅ft
Replace screws.
Second stage 45°
expand_moreAll other modifications
expand_moreBalance shaft module
First stage 14.75 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreConnecting rod bearing
expand_moreAll Audi diesel V6 2.7 L CAMB engines
First stage 25.81 lbf⋅ft
Use new screws.
Second stage 90°
expand_moreAll Audi gasoline straight-4 2.0 L CDNB engines
First stage 33.19 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreAll Audi diesel V6 3.0 L CLAB engines
First stage 25.81 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreAll Audi gasoline straight-4 2.0 L CNCD engines
First stage 33.19 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreAll other modifications
First stage 22.13 lbf⋅ft
Replace screws.
Second stage 90°
Oil screw head support and thread.
expand_moreCrankcase ventilation
2.0 TFSI with gasoline straight-4 2.0 L 221 HP at 4500 RPM, 350 N⋅m at 1500 RPM engine (2013.5–) 6.64 lbf⋅ft
Tighten screws crosswise.
expand_moreCrankshaft central screws
expand_moreAll Audi gasoline straight-4 1.8 L CABD engines
First stage 110.63 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreAll Audi diesel straight-4 2.0 L CAHB engines
First stage 132.76 lbf⋅ft
Use new screw.
Second stage 90°
Third stage 45°
expand_moreAll Audi diesel straight-4 2.0 L CGLC engines
First stage 132.76 lbf⋅ft
Use new screw.
Second stage 90°
Third stage 45°
expand_moreAll Audi diesel straight-4 2.0 L CNHA engines
First stage 132.76 lbf⋅ft
Replace screws.
Second stage 90°
Oil screw head support and thread.
Third stage 45°
expand_moreAll other modifications
First stage 110.63 lbf⋅ft
Replace screws and oil sealing rings.
Second stage 90°
expand_moreCrankshaft pulley
expand_moreAll Audi diesel straight-4 2.0 L CAHA engines
First stage 7.38 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreAll other modifications
First stage 14.75 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreDrive plate
expand_moreOn crankshaft
First stage 44.25 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreEngine block closure screws
3.0 TDI with diesel V6 3.0 L 201 HP at 3750 RPM, 400 N⋅m at 1250 RPM engine (2011.10–) 18.44 lbf⋅ft
expand_moreFlywheel
expand_moreAll Audi gasoline straight-4 1.8 L CJEE engines
First stage 44.25 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreAll Audi diesel straight-4 2.0 L CNHA engines
First stage 44.25 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreAll other modifications
To drive plate 44.25 lbf⋅ft
Replace screws.
expand_moreMain bearing
expand_moreAll Audi gasoline straight-4 1.8 L CABD engines
expand_moreScrews M8 and M10
First stage Tighten by hand
Replace screws.
expand_moreScrews (M10)
expand_moreSecond stage
First step 47.94 lbf⋅ft
Second step 90°
expand_moreScrews (M8)
expand_moreThird stage
First step 14.75 lbf⋅ft
Second step 90°
expand_moreAll Audi diesel straight-4 2.0 L CAHB engines
expand_moreBalance shaft module
First stage 4.43 lbf⋅ft
Replace screws.
expand_moreBalance shaft module (M7)
expand_moreSecond stage
First step 9.59 lbf⋅ft
Second step 90°
expand_moreBalance shaft module (M8)
expand_moreSecond stage
First step 14.75 lbf⋅ft
Second step 90°
expand_moreBearing cap
First stage 47.94 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreAll Audi gasoline V6 3.2 L CALA engines
expand_moreScrews 1 – 16
First stage 36.88 lbf⋅ft
Replace screws.
Second stage 90°
Screws 17 – 31 16.96 lbf⋅ft
expand_moreAll Audi diesel V6 2.7 L CAMB engines
First stage 22.13 lbf⋅ft
Alternately, first inside and then outside
Second stage 36.88 lbf⋅ft
Use new screws.
Third stage 90°
expand_moreAll Audi gasoline straight-4 1.8 L CDHB engines
expand_moreCenter
expand_moreScrews
First stage 47.94 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreLateral-fitting screw
First stage 14.75 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreAll Audi gasoline straight-4 2.0 L CDNB engines
expand_moreCenter
expand_moreScrews
First stage 47.94 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreLateral-fitting screw
First stage 14.75 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreAll Audi gasoline straight-4 2.0 L CDNC engines
expand_moreM10
First stage Tighten by hand
Replace screws.
Second stage 47.94 lbf⋅ft
Third stage 90°
expand_moreLateral-fitting screws (M8)
Fourth stage 14.75 lbf⋅ft
Replace screws.
Fifth stage 90°
expand_moreAll Audi diesel straight-4 2.0 L CGLC engines
expand_moreBalance shaft module
expand_moreScrews 1 – 6
First stage Screw in screw(s) by hand.
Replace screws.
Second stage 4.43 lbf⋅ft
Fifth stage 90°
expand_moreScrews 5 – 6
Third stage 9.59 lbf⋅ft
expand_moreScrews 1 – 4
Fourth stage 14.75 lbf⋅ft
expand_moreBearing cap
First stage 47.94 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreAll Audi diesel V6 3.0 L CLAB engines
First stage 22.13 lbf⋅ft
Replace screws.
expand_moreSecond stage
First step 36.88 lbf⋅ft
Second step 180°
expand_moreAll Audi gasoline straight-4 2.0 L CNCD engines
expand_moreScrews 1 – 11
First stage Screw in screw(s) by hand.
Replace screws.
expand_moreScrews 1 – 10
Second stage 47.94 lbf⋅ft
Third stage 90°
expand_moreScrew 11
Fourth stage 14.75 lbf⋅ft
Fifth stage 90°
All Audi diesel straight-4 2.0 L CNHA engines Component must not be knocked down.
expand_moreVibration damper
expand_moreAll Audi diesel V6 2.7 L CAMA engines
First stage 14.75 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreAll Audi diesel V6 3.0 L CLAB engines
First stage 14.75 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreAll other modifications
First stage 7.38 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreEngine control
Balance shaft timing chain guide rail 14.75 lbf⋅ft
Balance shaft timing chain tension rail 14.75 lbf⋅ft
expand_moreBottom part of the control unit housing
expand_moreAll Audi diesel V6 2.7 L CAMB engines
First stage 3.69 lbf⋅ft
Tighten the screws cross-wise from inside to outside.
expand_moreM6
Second stage 6.64 lbf⋅ft
expand_moreM8
Third stage 16.96 lbf⋅ft
expand_moreAll other modifications
First stage 5.9 lbf⋅ft
Use new screws and tighten them crosswise.
Second stage 45°
expand_moreCamshaft adjuster
expand_moreAll Audi gasoline V6 3.2 L CALA engines
First stage 59 lbf⋅ft
Second stage 90°
expand_moreAll Audi gasoline straight-4 1.8 L CDHB engines
Bearing casing 6.64 lbf⋅ft
Cap 6.64 lbf⋅ft
expand_moreInlet camshaft
Central screws 25.81 lbf⋅ft
Left-hand thread
expand_moreOutlet camshaft
expand_moreCentral screws
First stage 5.9 lbf⋅ft
Use new screw.
Second stage 90°
expand_moreAll Audi gasoline straight-4 2.0 L CDNB engines
Bearing casing 6.64 lbf⋅ft
Cap 6.64 lbf⋅ft
Central screws 25.81 lbf⋅ft
Left-hand thread
expand_moreAll Audi gasoline straight-4 2.0 L CNCD engines
expand_moreBearing casing
First stage 2.95 lbf⋅ft
Replace screws.
Second stage 180°
expand_moreCamshaft adjuster valve
First stage 2.95 lbf⋅ft
Replace screws.
Second stage 45°
Central screws 25.81 lbf⋅ft
Left-hand thread
expand_moreAll other modifications
Cap 6.64 lbf⋅ft
expand_moreCABD engine
Bearing casing 6.64 lbf⋅ft
expand_moreExhaust side
expand_moreCentral screws
First stage 5.9 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreCJEB engine
expand_moreBearing casing
First stage 2.95 lbf⋅ft
Replace screws.
Second stage 180°
expand_moreExhaust side
Central screws 25.81 lbf⋅ft
Left-hand thread
expand_moreIntake-side
Central screws 25.81 lbf⋅ft
Left-hand thread
expand_moreCamshaft drive belt deflection pulley
expand_moreAll Audi diesel straight-4 2.0 L CNHA engines
Screws 14.75 lbf⋅ft
Replace bolt.
Stud screws 11.06 lbf⋅ft
Replace the stud bolt.
Otherwise 14.75 lbf⋅ft
Replace nuts.
expand_moreAll other modifications
expand_moreM10
First stage 36.88 lbf⋅ft
Replace screws.
Second stage 90°
M8 14.75 lbf⋅ft
expand_moreCamshaft timing chain guide rail
2.0 TFSI with gasoline straight-4 2.0 L 221 HP at 4500 RPM, 350 N⋅m at 1500 RPM engine (2013.5–) 14.75 lbf⋅ft
expand_moreCamshaft timing chain slip rail
expand_moreAll Audi diesel V6 2.7 L CAMB engines
First stage 3.69 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreAll Audi diesel V6 3.0 L CLAB engines
First stage 3.69 lbf⋅ft
Replace screws.
Second stage 90°
All other modifications 14.75 lbf⋅ft
expand_moreCamshaft timing chain tensioner
expand_moreAll Audi diesel V6 2.7 L CAMB engines
First stage 3.69 lbf⋅ft
Use new screw.
Second stage 90°
expand_moreAll Audi diesel V6 3.0 L CLAB engines
First stage 3.69 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreAll Audi gasoline straight-4 2.0 L CNCD engines
First stage 2.95 lbf⋅ft
Replace screws.
Second stage 90°
All other modifications 6.64 lbf⋅ft
expand_moreCamshaft timing chain tensioning rail
expand_moreAll Audi diesel V6 2.7 L CAMB engines
First stage 3.69 lbf⋅ft
Replace screws.
Second stage 90°
All other modifications 14.75 lbf⋅ft
expand_moreCamshaft timing gear
expand_moreAll Audi diesel straight-4 2.0 L CAHB engines
Central screws 73.76 lbf⋅ft
expand_moreWheel
First stage 14.75 lbf⋅ft
Replace screws.
Second stage 45°
expand_moreAll Audi diesel straight-4 2.0 L CGLC engines
Central screws 73.76 lbf⋅ft
Wheel 18.44 lbf⋅ft
All Audi diesel V6 3.0 L CLAB engines 16.96 lbf⋅ft
expand_moreAll Audi diesel straight-4 2.0 L CNHA engines
Central screws 73.76 lbf⋅ft
Clamping screws 6.64 lbf⋅ft
expand_moreAll other modifications
expand_moreHigh pressure pump belt
Central screws 55.32 lbf⋅ft
Otherwise 16.96 lbf⋅ft
expand_moreControl drive chain guide rail
expand_more3.2 FSI with gasoline V6 3.2 L 261 HP engine (2007.6–)
First stage 7.38 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreControl drive chain tensioner
All Audi gasoline V6 3.2 L CALA engines 6.64 lbf⋅ft
All Audi gasoline straight-4 2.0 L CDNB engines 47.94 lbf⋅ft
All Audi gasoline straight-4 2.0 L CDNC engines 47.94 lbf⋅ft
expand_moreAll Audi diesel V6 3.0 L CLAB engines
First stage 3.69 lbf⋅ft
Use new screw.
Second stage 90°
All other modifications 8.85 lbf⋅ft
expand_moreControl drive chain tensioning rail
All Audi gasoline straight-4 2.0 L CDNB engines 14.75 lbf⋅ft
All Audi gasoline straight-4 2.0 L CDNC engines 14.75 lbf⋅ft
All Audi diesel V6 3.0 L CLAB engines 16.96 lbf⋅ft
All other modifications 8.85 lbf⋅ft
expand_moreControl drive sprocket wheel
expand_moreAll Audi gasoline V6 3.2 L CALA engines
expand_moreBearing pedestal
First stage 5.9 lbf⋅ft
Replace screws.
Second stage 45°
expand_moreM10
First stage 22.13 lbf⋅ft
Use new screw.
Second stage 90°
expand_moreM6
First stage 4.43 lbf⋅ft
Use new screw.
Second stage 60°
expand_moreAll other modifications
Left 33.19 lbf⋅ft
expand_moreRight
First stage 3.69 lbf⋅ft
Use new screw.
Second stage 90°
expand_moreControl drive timing chain slip rail
expand_moreAll Audi gasoline V6 3.2 L CALA engines
First stage 7.38 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreAll Audi diesel V6 2.7 L CAMB engines
expand_moreRight
Bottom 8.85 lbf⋅ft
expand_moreTop
First stage 3.69 lbf⋅ft
Second stage 90°
expand_moreAll Audi diesel V6 3.0 L CLAB engines
First stage 3.69 lbf⋅ft
Replace screws.
Second stage 90°
All other modifications 14.75 lbf⋅ft
expand_moreControl unit for intake valve timing
2.0 TFSI with gasoline straight-4 2.0 L 221 HP at 4500 RPM, 350 N⋅m at 1500 RPM engine (2013.5–) 3.69 lbf⋅ft
expand_moreDrive chain balance shaft tensioner
expand_moreAll Audi gasoline V6 3.2 L CALA engines
First stage 7.38 lbf⋅ft
Replace screws.
Second stage 45°
All other modifications 62.69 lbf⋅ft
Injection pump drive belt tensioning roller 16.96 lbf⋅ft
expand_moreInlet camshaft wheel
expand_moreAll Audi gasoline V6 3.2 L CALA engines
First stage 59 lbf⋅ft
Use new screw.
Second stage 90°
All other modifications 16.96 lbf⋅ft
expand_moreIntermediate shaft chain sprocket
expand_moreAll Audi gasoline straight-4 1.8 L CABD engines
First stage 7.38 lbf⋅ft
Replace screw and intermediate wheel when loosening the screw.
Second stage for freedom from play
expand_moreThird stage
First step 18.44 lbf⋅ft
Second step 90°
expand_moreAll Audi gasoline straight-4 1.8 L CDHB engines
First stage 7.38 lbf⋅ft
Replace the screws and sprocket wheel.
Second stage for freedom from play
expand_moreThird stage
First step 18.44 lbf⋅ft
Second step 90°
expand_moreAll Audi gasoline straight-4 2.0 L CDNB engines
First stage 7.38 lbf⋅ft
Replace the screws and sprocket wheel.
Second stage for freedom from play
expand_moreThird stage
First step 18.44 lbf⋅ft
Second step 90°
expand_moreAll Audi gasoline straight-4 2.0 L CNCD engines
First stage 7.38 lbf⋅ft
Replace screw and intermediate wheel when loosening the screw.
Second stage for freedom from play
Third stage 18.44 lbf⋅ft
Fourth stage 90°
expand_moreAll other modifications
expand_moreBalance shaft module
First stage 66.38 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreOil pump drive chain tensioner
expand_moreAll Audi gasoline V6 3.2 L CALA engines
First stage 7.38 lbf⋅ft
Replace screws.
Second stage 45°
expand_moreAll Audi diesel V6 3.0 L CLAB engines
First stage 3.69 lbf⋅ft
Replace screws.
Second stage 90°
All other modifications 6.64 lbf⋅ft
expand_moreOutlet camshaft wheel
expand_moreAll Audi gasoline V6 3.2 L CALA engines
First stage 59 lbf⋅ft
Use new screw.
Second stage 90°
expand_moreAll Audi gasoline straight-4 2.0 L CDNB engines
expand_moreCentral screws
First stage 14.75 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreTension rail bearing screws
All Audi diesel V6 3.0 L CLAB engines 16.96 lbf⋅ft
All other modifications 8.85 lbf⋅ft
expand_moreTiming case cover
expand_moreAll Audi gasoline V6 3.2 L CALA engines
expand_moreScrew 1
First stage 3.69 lbf⋅ft
Third stage 6.64 lbf⋅ft
expand_moreScrews 2 – 11
Second stage 6.64 lbf⋅ft
Tighten cross-wise.
expand_moreScrews 9 – 11
Fourth stage 14.75 lbf⋅ft
expand_moreScrew 4
Fifth stage 11.8 lbf⋅ft
expand_moreAll Audi diesel V6 3.0 L CLAB engines
expand_moreScrews 1 – 4
First stage 6.64 lbf⋅ft
expand_moreScrews 5 – 24
Second stage 2.21 lbf⋅ft
Replace screws.
Third stage 2.21 lbf⋅ft
Control tensioner
Fifth stage 90°
expand_moreScrews 5 – 10
Fourth stage 5.9 lbf⋅ft
expand_moreTiming case cover cylinder row 1
expand_moreAll Audi gasoline V6 3.2 L CALA engines
First stage 3.69 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreAll Audi diesel V6 3.0 L CLAB engines
First stage 5.9 lbf⋅ft
Replace bolts and tighten crosswise.
Second stage 90°
expand_moreTiming case cover cylinder row 2
expand_moreAll Audi gasoline V6 3.2 L CALA engines
First stage 3.69 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreAll Audi diesel V6 3.0 L CLAB engines
First stage 5.9 lbf⋅ft
Replace bolts and tighten crosswise.
Second stage 90°
expand_moreToothed belt guard
Coolant pump 6.64 lbf⋅ft
expand_moreToothed belt guard at the bottom
All Audi diesel straight-4 2.0 L CNHA engines 8.85 lbf⋅ft
All other modifications 7.38 lbf⋅ft
expand_moreToothed belt guard at the top
2.0 TDI with diesel straight-4 2.0 L 188 HP engine (2013.9–) 8.85 lbf⋅ft
Toothed belt guard center 7.38 lbf⋅ft
expand_moreToothed belt tensioning roller
expand_moreAll Audi diesel straight-4 2.0 L CAHB engines
First stage 14.75 lbf⋅ft
Replace nuts.
Second stage 45°
expand_moreAll Audi diesel straight-4 2.0 L CGLC engines
First stage 14.75 lbf⋅ft
Replace nuts.
Second stage 45°
expand_moreAll Audi diesel straight-4 2.0 L CNHA engines
First stage 14.75 lbf⋅ft
Replace nuts.
Second stage 45°
Stud screws 11.06 lbf⋅ft
Replace the stud bolt.
expand_moreAll other modifications
expand_moreHigh pressure pump belt
Central screws 16.96 lbf⋅ft
expand_moreTop part of control unit housing
expand_moreAll Audi gasoline V6 3.2 L CALA engines
First stage 3.69 lbf⋅ft
Replace bolts.
Second stage 90°
expand_moreAll Audi diesel V6 2.7 L CAMB engines
First stage 3.69 lbf⋅ft
Tighten cross-wise.
Second stage 5.9 lbf⋅ft
Third stage 90°
All other modifications 6.64 lbf⋅ft
Tighten cross-wise.
expand_moreEngine lubrication
expand_moreOil cooler
expand_moreAll Audi gasoline straight-4 1.8 L CABD engines
CABD engine 16.96 lbf⋅ft
expand_moreCJEB engine
First stage 5.9 lbf⋅ft
Second stage 45°
All Audi diesel straight-4 2.0 L CAHA engines 18.44 lbf⋅ft
All Audi diesel straight-4 2.0 L CAHB engines 18.44 lbf⋅ft
All Audi gasoline straight-4 1.8 L CDHB engines 16.96 lbf⋅ft
expand_moreAll Audi gasoline straight-4 2.0 L CDNB engines
Heat-exchanger on oil filter housing 16.96 lbf⋅ft
All Audi gasoline straight-4 2.0 L CDNC engines 16.96 lbf⋅ft
All Audi diesel straight-4 2.0 L CGLC engines 8.11 lbf⋅ft
All Audi diesel straight-4 2.0 L CGLD engines 18.44 lbf⋅ft
expand_moreAll Audi gasoline straight-4 2.0 L CNCD engines
First stage 5.9 lbf⋅ft
Replace screws.
Second stage 45°
All Audi diesel straight-4 2.0 L CNHA engines Component must not be knocked down.
All other modifications 6.64 lbf⋅ft
Oil drain plug 22.13 lbf⋅ft
Replace screws.
expand_moreOil filter
expand_moreAll Audi gasoline straight-4 2.0 L CNCD engines
Oil filter cover 18.44 lbf⋅ft
Slightly oil sealing lips.
expand_moreAll Audi diesel straight-4 2.0 L CNHA engines
Oil filter cover 18.44 lbf⋅ft
All other modifications 14.7517.7 lbf⋅ft
expand_moreOil filter housing
expand_moreAll Audi gasoline straight-4 1.8 L CABD engines
expand_moreCJEB engine
Oil filter cover 18.44 lbf⋅ft
expand_moreAll Audi diesel straight-4 2.0 L CAHB engines
Oil filter cover 18.44 lbf⋅ft
expand_moreOn the engine block
First stage 11.06 lbf⋅ft
Tighten alternately starting from the top left
Second stage 90°
expand_moreAll Audi gasoline V6 3.2 L CALA engines
Oil filter cover 18.44 lbf⋅ft
On the engine block 9.59 lbf⋅ft
expand_moreAll Audi diesel straight-4 2.0 L CGLC engines
Oil filter cover 18.44 lbf⋅ft
expand_moreOn the engine block
First stage 10.33 lbf⋅ft
Tighten alternately starting from the top left
Second stage 90°
expand_moreAll Audi diesel V6 3.0 L CLAB engines
Oil filter cover 25.81 lbf⋅ft
On the engine block 6.64 lbf⋅ft
expand_moreAll Audi gasoline straight-4 2.0 L CNCD engines
First stage Screw in screws by hand.
Use new screws and tighten them crosswise.
Second stage 14.75 lbf⋅ft
Third stage 90°
expand_moreAll Audi diesel straight-4 2.0 L CNHA engines
First stage 14.75 lbf⋅ft
Use new screws and tighten them crosswise.
Second stage 90°
expand_moreAll other modifications
Cap 25.81 lbf⋅ft
Otherwise 6.64 lbf⋅ft
Oil pressure sensor 14.75 lbf⋅ft
expand_moreOil pump
expand_moreAll Audi gasoline straight-4 1.8 L CABD engines
CABD engine 14.75 lbf⋅ft
expand_moreCJEB engine
First stage 5.9 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreAll Audi diesel V6 3.0 L CLAB engines
First stage 5.9 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreAll Audi gasoline straight-4 2.0 L CNCD engines
First stage 5.9 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreAll Audi diesel straight-4 2.0 L CNHA engines
First stage 8.85 lbf⋅ft
Replace screws.
Second stage 180°
All other modifications 14.75 lbf⋅ft
expand_moreOil pump chain wheel
expand_moreAll Audi gasoline V6 3.2 L CALA engines
First stage 22.13 lbf⋅ft
Use new screw.
Second stage 90°
expand_moreAll Audi diesel V6 3.0 L CLAB engines
First stage 22.13 lbf⋅ft
Replace screws.
Second stage 45°
All other modifications 47.2 lbf⋅ft
expand_moreOil sump
expand_moreAll Audi gasoline straight-4 1.8 L CABD engines
expand_moreCABD engine
expand_moreOil sump lower part
First stage 5.9 lbf⋅ft
Replace screws.
Second stage 45°
expand_moreOil sump top part
First stage 11.06 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreCJEB engine
expand_moreOil sump top part
expand_moreScrews 1 – 14
First stage 5.9 lbf⋅ft
Replace screws.
expand_moreScrews 1 – 2
Second stage 180°
expand_moreScrews 3 – 9
Third stage 45°
expand_moreScrew 10
Fourth stage 180°
expand_moreScrews 11 – 14
Fifth stage 90°
expand_moreOil sump lower part
expand_morePlastic oil sump
First stage 5.9 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreSheet-steel sump
First stage 5.9 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreAll Audi diesel straight-4 2.0 L CAHB engines
expand_moreAt the gearbox
expand_moreM10
First stage 11.06 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreOn the engine block
M10 29.5 lbf⋅ft
M7 11.06 lbf⋅ft
Gradually tighten screws crosswise.
expand_moreAll Audi gasoline V6 3.2 L CALA engines
expand_moreOil sump lower part
First stage 3.69 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreOil sump top part
First stage 3.69 lbf⋅ft
Tighten cross-wise.
Second stage 11.8 lbf⋅ft
expand_moreAll Audi gasoline straight-4 1.8 L CDHB engines
expand_moreOil sump lower part
First stage 5.9 lbf⋅ft
Replace screws.
Second stage 45°
expand_moreOil sump top part
First stage 11.06 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreAll Audi gasoline straight-4 2.0 L CDNB engines
expand_moreOil sump lower part
First stage 5.9 lbf⋅ft
Replace screws.
Second stage 45°
expand_moreOil sump top part
First stage 11.06 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreAll Audi gasoline straight-4 2.0 L CDNC engines
expand_moreOil sump lower part
First stage 5.9 lbf⋅ft
Use new screws and tighten them crosswise.
Second stage 45°
expand_moreOil sump top part
First stage 11.06 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreAll Audi diesel straight-4 2.0 L CGLC engines
M10 29.5 lbf⋅ft
M7 11.06 lbf⋅ft
Gradually tighten screws crosswise.
expand_moreAll Audi gasoline straight-4 2.0 L CNCD engines
expand_moreOil sump lower part
expand_moreFrom sheet metal
First stage 5.9 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreWith plastic housing
First stage 5.9 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreOil sump top part
expand_moreScrews 1 – 14
First stage 5.9 lbf⋅ft
Replace screws.
expand_moreScrews 1 – 2
Second stage 180°
expand_moreScrews 3 – 9
Third stage 45°
expand_moreScrew 10
Fourth stage 180°
expand_moreScrews 11 – 14
Fifth stage 90°
expand_moreAll Audi diesel straight-4 2.0 L CNHA engines
expand_moreOn the engine block
First stage 3.69 lbf⋅ft
Second stage 9.59 lbf⋅ft
expand_moreAt the gearbox
Third stage 29.5 lbf⋅ft
expand_moreAll other modifications
expand_moreAt the gearbox (M10)
First stage 11.06 lbf⋅ft
Replace screws.
Second stage 105°
expand_moreOil sump lower part
First stage 3.69 lbf⋅ft
Tighten the screws crosswise.
Second stage 5.9 lbf⋅ft
Replace screws.
Third stage 90°
expand_moreOil sump top part
First stage 3.69 lbf⋅ft
Replace screws.
Second stage 90°
Locking screws 18.44 lbf⋅ft
TDC marking.
expand_moreOil sump top part on the engine block
First stage 3.69 lbf⋅ft
Tighten cross-wise.
Second stage 11.06 lbf⋅ft
expand_moreEngine management
Camshaft sensor 7.38 lbf⋅ft
Use new screw.
expand_moreCharge air pressure sensor
All Audi diesel straight-4 2.0 L CNHA engines 5.9 lbf⋅ft
All other modifications 3.69 lbf⋅ft
expand_moreCrankshaft sensor
expand_moreAll Audi gasoline straight-4 1.8 L CABD engines
CJEB engine 7.38 lbf⋅ft
All Audi gasoline V6 3.2 L CALA engines 6.64 lbf⋅ft
All Audi diesel V6 2.7 L CAMA engines 6.64 lbf⋅ft
All Audi gasoline straight-4 1.8 L CDHB engines 2.95 lbf⋅ft
All Audi diesel V6 2.7 L CGKA engines 6.64 lbf⋅ft
All Audi diesel V6 3.0 L CLAB engines 6.64 lbf⋅ft
All Audi gasoline straight-4 2.0 L CNCD engines 6.64 lbf⋅ft
All other modifications 3.32 lbf⋅ft
expand_moreExhaust gas temperature sensor
expand_more2.0 TDI with diesel straight-4 2.0 L 188 HP engine (2013.9–)
On exhaust manifold 33.19 lbf⋅ft
On particle filter 44.25 lbf⋅ft
expand_moreGlow plugs
expand_moreAll Audi diesel straight-4 2.0 L CNHA engines
With combustion chamber pressure sensor 8.85 lbf⋅ft
Without combustion chamber pressure sensor 12.54 lbf⋅ft
All other modifications 12.54 lbf⋅ft
expand_moreKnock sensor
expand_moreAll Audi gasoline straight-4 2.0 L CNCD engines
First stage 5.9 lbf⋅ft
Replace screws.
Second stage 90°
All other modifications 14.75 lbf⋅ft
expand_moreLambda sensor
All Audi diesel straight-4 2.0 L CAHA engines 36.88 lbf⋅ft
All Audi gasoline straight-4 2.0 L CNCD engines 44.25 lbf⋅ft
All Audi diesel straight-4 2.0 L CNHA engines 38.35 lbf⋅ft
All other modifications 40.57 lbf⋅ft
expand_moreNOx sensor
2.0 TDI with diesel straight-4 2.0 L 188 HP engine (2013.9–) 40.57 lbf⋅ft
expand_moreEngine mounting
expand_moreEngine bracket
On the engine block 29.5 lbf⋅ft
expand_moreEngine mounting
expand_moreAll Audi diesel straight-4 2.0 L CGLC engines
At the subframe 40.57 lbf⋅ft
expand_moreOn engine bracket
First stage 66.38 lbf⋅ft
Use new screw.
Second stage 90°
expand_moreAll other modifications
At the subframe 40.57 lbf⋅ft
expand_moreOn engine bracket
First stage 66.38 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreSubframe
expand_moreAll Audi diesel V6 2.7 L CAMB engines
First stage 84.82 lbf⋅ft
Replace screws.
Second stage 90°
Tighten alternately first at the front, then at the rear.
expand_moreAll Audi gasoline straight-4 1.8 L CDHB engines
expand_moreOn chassis
First stage 84.82 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreAll Audi diesel straight-4 2.0 L CGLC engines
expand_moreOn chassis
First stage 84.82 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreAll other modifications
First stage 84.82 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreSubframe diagonal strut
expand_moreAll Audi diesel straight-4 2.0 L CAHA engines
expand_moreM12 × 42 screws
First stage 66.38 lbf⋅ft
Use new screws.
Second stage 135°
expand_moreM12 × 50 screws
First stage 66.38 lbf⋅ft
Use new screws.
Second stage 90°
expand_moreAll Audi diesel V6 2.7 L CAMB engines
expand_moreM12 × 42 screws
First stage 66.38 lbf⋅ft
Use new screws.
Second stage 135°
expand_moreM12 × 50 screws
First stage 66.38 lbf⋅ft
Use new screws.
Second stage 90°
expand_moreAll Audi gasoline straight-4 2.0 L CNCD engines
First stage 66.38 lbf⋅ft
Use new screw.
Second stage 90°
expand_moreAll Audi gasoline straight-4 2.0 L CNCE engines
First stage 66.38 lbf⋅ft
Use new screw.
Second stage 90°
expand_moreAll Audi diesel straight-4 2.0 L CNHA engines
First stage 66.38 lbf⋅ft
Use new screw.
Second stage 90°
expand_moreAll other modifications
expand_moreFirst stage
With electric servo-steering 66.38 lbf⋅ft
Use new screw.
With hydraulic servo-steering 66.38 lbf⋅ft
Use new screw.
expand_moreSecond stage
With electric servo-steering 90°
With hydraulic servo-steering 135°
expand_moreTorque arm
expand_moreAll Audi diesel V6 3.0 L CLAB engines
On chassis 18.44 lbf⋅ft
On engine sump 29.5 lbf⋅ft
expand_moreAll Audi diesel straight-4 2.0 L CNHA engines
At the subframe 40.57 lbf⋅ft
On engine 29.5 lbf⋅ft
expand_moreAll other modifications
expand_moreOn chassis
Cross support 29.5 lbf⋅ft
On the engine block 18.44 lbf⋅ft
expand_moreTorque support bracket
2.0 TDI with diesel straight-4 2.0 L 168 HP at 4200 RPM, 350 N⋅m at 1750 RPM engine (2008.8–) 18.44 lbf⋅ft
expand_moreExhaust system
expand_moreCatalytic converter
All Audi diesel straight-4 2.0 L CAHA engines 16.96 lbf⋅ft
Replace the nuts and use fitting paste
All Audi gasoline V6 3.2 L CALA engines 16.96 lbf⋅ft
Replace nut.
All other modifications 29.5 lbf⋅ft
Replace the nuts and use fitting paste
expand_moreCatalytic converter bracket
2.0 TFSI with gasoline straight-4 2.0 L 221 HP at 4500 RPM, 350 N⋅m at 1500 RPM engine (2013.5–) 16.96 lbf⋅ft
expand_moreDiesel particulate filter
All Audi diesel V6 2.7 L CAMA engines 16.96 lbf⋅ft
All Audi diesel V6 2.7 L CGKA engines 16.96 lbf⋅ft
expand_moreAll Audi diesel straight-4 2.0 L CNHA engines
First stage 1.48 lbf⋅ft
Second stage 5.16 lbf⋅ft
expand_moreDifferential pressure sensor lines
2.0 TDI with diesel straight-4 2.0 L 188 HP engine (2013.9–) 33.19 lbf⋅ft
expand_moreExhaust manifold
expand_moreAll Audi gasoline straight-4 1.8 L CABD engines
expand_moreCABD engine
Upper nuts 22.13 lbf⋅ft
Replace nuts.
expand_moreCABD engine lower nuts
First stage 3.69 lbf⋅ft
Replace nuts.
Second stage 8.85 lbf⋅ft
Third stage 11.8 lbf⋅ft
Fourth stage 18.44 lbf⋅ft
expand_moreAll Audi gasoline V6 3.2 L CALA engines
First stage 11.06 lbf⋅ft
Replace nuts.
Second stage 18.44 lbf⋅ft
expand_moreAll Audi gasoline straight-4 1.8 L CDHB engines
expand_moreNuts
Bottom 22.13 lbf⋅ft
Replace nuts.
expand_moreTop nuts
First stage 3.69 lbf⋅ft
Replace nuts.
Second stage 8.85 lbf⋅ft
Tighten cross-wise.
Third stage 11.8 lbf⋅ft
Fourth stage 18.44 lbf⋅ft
expand_moreAll Audi gasoline straight-4 2.0 L CDNB engines
expand_moreNuts
Bottom 22.13 lbf⋅ft
Replace nuts.
expand_moreTop nuts
First stage 3.69 lbf⋅ft
Replace nuts.
Second stage 8.85 lbf⋅ft
Tighten cross-wise.
Third stage 11.8 lbf⋅ft
Fourth stage 18.44 lbf⋅ft
expand_moreAll Audi gasoline straight-4 2.0 L CDNC engines
Bottom 22.13 lbf⋅ft
Replace the nuts and use fitting paste
expand_moreTop
First stage 3.69 lbf⋅ft
Replace nuts.
Second stage 8.85 lbf⋅ft
Third stage 11.8 lbf⋅ft
Fourth stage 18.44 lbf⋅ft
expand_moreAll Audi diesel V6 3.0 L CLAB engines
At the cylinder head 18.44 lbf⋅ft
Replace nuts. Use hot screw paste.
expand_moreAt the turbocharger
First stage 22.13 lbf⋅ft
Replace screws. Use hot screw paste.
Second stage 90°
expand_moreAll Audi diesel straight-4 2.0 L CNHA engines
First stage 8.11 lbf⋅ft
Tighten screws from the inside outwards.
Second stage 16.23 lbf⋅ft
Third stage 16.23 lbf⋅ft
Control tensioner
All other modifications 18.44 lbf⋅ft
Replace the nuts and use fitting paste
expand_moreExhaust manifold heat shields
All Audi gasoline straight-4 2.0 L CNCD engines 6.64 lbf⋅ft
All Audi diesel straight-4 2.0 L CNHA engines 7.38 lbf⋅ft
expand_moreExhaust pipe
expand_moreAll Audi diesel V6 2.7 L CAMB engines
First stage 22.13 lbf⋅ft
Replace screws and nuts.
Second stage 90°
All other modifications 18.44 lbf⋅ft
Replace nuts.
expand_moreExhaust pipe bracket
All Audi gasoline straight-4 2.0 L CNCD engines 16.96 lbf⋅ft
All Audi diesel straight-4 2.0 L CNHA engines 16.96 lbf⋅ft
All other modifications 14.75 lbf⋅ft
expand_moreExhaust pipe rear
expand_moreAll Audi gasoline straight-4 2.0 L CNCD engines
Clamps 16.96 lbf⋅ft
All Audi diesel straight-4 2.0 L CNHA engines 16.96 lbf⋅ft
expand_moreParticle filter bracket
expand_more2.0 TDI with diesel straight-4 2.0 L 188 HP engine (2013.9–)
First stage 1.48 lbf⋅ft
Second stage 90°
slacken
Third stage 14.75 lbf⋅ft
expand_morePrimary catalytic converter
2.0 TDI with diesel straight-4 2.0 L 188 HP engine (2013.9–) 16.96 lbf⋅ft
Replace nuts.
expand_moreFuel supply
Fuel filter bracket 5.9 lbf⋅ft
expand_moreFuel lines
expand_moreAll Audi gasoline straight-4 1.8 L CDHB engines
expand_moreHigh-pressure side
Union nuts 14.75 lbf⋅ft
expand_moreAll Audi gasoline straight-4 2.0 L CDNB engines
expand_moreHigh-pressure side
Union nuts 19.91 lbf⋅ft
expand_moreAll Audi gasoline straight-4 2.0 L CDNC engines
High-pressure side 19.91 lbf⋅ft
expand_moreFuel pump
expand_more2.0 TDI with diesel straight-4 2.0 L 188 HP engine (2013.9–)
Preliminary feed pump 5.9 lbf⋅ft
expand_moreIgnition system
Spark plugs 22.13 lbf⋅ft
expand_moreStart system
expand_moreStarter
expand_moreAll Audi gasoline V6 3.2 L CALA engines
expand_moreM12
First stage 22.13 lbf⋅ft
Replace screws.
Second stage 105°
expand_moreClass 10.9
M10 47.94 lbf⋅ft
expand_moreAll Audi diesel V6 2.7 L CAMA engines
M10 × 50 screws 47.94 lbf⋅ft
expand_moreM12
First stage 22.13 lbf⋅ft
Replace screws.
Second stage 105°
expand_moreAll Audi gasoline straight-4 1.8 L CDHB engines
M10 × 50 screws 47.94 lbf⋅ft
expand_moreAll Audi gasoline straight-4 2.0 L CDNB engines
M10 × 50 screws 47.94 lbf⋅ft
expand_moreAll Audi diesel V6 3.0 L CLAB engines
M10 47.94 lbf⋅ft
expand_moreM12
First stage 22.13 lbf⋅ft
Second stage 90°
expand_moreAll Audi gasoline straight-4 2.0 L CNCD engines
M10 47.94 lbf⋅ft
expand_moreM12 × 100 screws
First stage 22.13 lbf⋅ft
Second stage 90°
expand_moreAll Audi diesel straight-4 2.0 L CNHA engines
M10 × 50 screws 47.94 lbf⋅ft
expand_moreAll other modifications
M10 47.94 lbf⋅ft
Property class 10.9
expand_moreM12
First stage 22.13 lbf⋅ft
Replace screws.
Second stage 90°

Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2019 Audi A5 user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.

Before doing any DIY service please check your insurance policy and Audi warranty policy for your region. In some regions DIY service may invalidate your warranty.

Conquer your fears and never give up!

DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Audi A5 service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.

Doing basic service for your 2019 Audi A5 you're not only saving money, but also also improving your technical skills and learning something new.

Units:
facebook twitter reddit linkedin messenger whatsapp telegram skype email chat