2015 Audi A5 Sportback engine fastener tightening specifications

in your garage to make future searches easy.

Condition	Value

expand_moreAir intake system

expand_moreIntake manifold


All Audi diesel straight-4 2.0 L CGLC engines	2.95 lbf⋅ft2.95 lbf⋅ft4 N⋅m

expand_moreAll Audi diesel straight-4 2.0 L CNHA engines


First stage	Screw in new screw(s) manually as far as it goes.
Second stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Third stage	90°90°90°


All other modifications	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m

expand_moreIntake manifold support

expand_moreAll Audi gasoline straight-4 2.0 L CNCD engines


Nuts	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Screws	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreAll Audi diesel straight-4 2.0 L CNHA engines


First stage	Screw in screw manually up to stop.
Second stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreAuxiliary assemblies

expand_moreAuxiliary drive belt deflection pulley

expand_moreAll Audi diesel straight-4 2.0 L CAGA engines


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Second stage	90°90°90°


All Audi gasoline straight-4 1.8 L CDHB engines	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
All Audi gasoline straight-4 2.0 L CDNB engines	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
All Audi gasoline straight-4 2.0 L CDNC engines	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
All Audi diesel V6 2.7 L CGKA engines	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m
All Audi diesel V6 2.7 L CGKB engines	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m

expand_moreAll Audi diesel straight-4 2.0 L CJCD engines


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Use new screw.
Second stage	90°90°90°


All Audi diesel V6 3.0 L CLAB engines	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m
All Audi diesel straight-4 2.0 L CNHA engines	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreAll other modifications


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAuxiliary drive belt tensioner


All Audi diesel straight-4 2.0 L CAGA engines	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m
All Audi diesel straight-4 2.0 L CAHA engines	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m
All Audi gasoline straight-4 1.8 L CDHB engines	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
All Audi gasoline straight-4 2.0 L CDNB engines	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
All Audi gasoline straight-4 2.0 L CDNC engines	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m

expand_moreAll Audi diesel V6 2.7 L CGKB engines

expand_moreM10


First stage	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
Replace screws.
Second stage	90°90°90°


M8	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m


All Audi diesel straight-4 2.0 L CJCA engines	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m

expand_moreAll Audi gasoline straight-4 1.8 L CJEB engines


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Second stage	45°45°45°

expand_moreAll Audi gasoline straight-4 1.8 L CJED engines


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Second stage	45°45°45°

expand_moreAll Audi diesel V6 3.0 L CLAB engines


First stage	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
Replace screws.
Second stage	90°90°90°


All Audi diesel straight-4 2.0 L CMEA engines	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m
All Audi diesel straight-4 2.0 L CMFA engines	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m

expand_moreAll Audi gasoline straight-4 2.0 L CNCD engines


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Replace screws.
Second stage	45°45°45°

expand_moreAll Audi diesel straight-4 2.0 L CNHA engines


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Second stage	90°90°90°

expand_moreAll other modifications


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Second stage	180°180°180°

expand_moreAir-conditioning compressor

expand_moreAll Audi diesel straight-4 2.0 L CJCD engines

expand_moreAluminium screws


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Second stage	180°180°180°


Steel screws	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m

expand_moreAll Audi gasoline straight-4 2.0 L CNCD engines

expand_moreAluminium screws


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Replace screws.
Second stage	180°180°180°


Steel screws	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m


All other modifications	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m

expand_moreAir-conditioning compressor bracket

expand_moreAll Audi gasoline straight-4 1.8 L CDHB engines


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace screws.
Second stage	90°90°90°


All Audi diesel V6 2.7 L CGKA engines	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
All Audi diesel V6 2.7 L CGKB engines	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m

expand_moreAll Audi diesel straight-4 2.0 L CJCD engines

expand_moreM10 × 155 screws


First stage	Tighten by hand
Replace screws.
Second stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Third stage	180°180°180°

expand_moreM10 × 40 screws


First stage	Tighten by hand
Replace screws.
Second stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Third stage	60°60°60°

expand_moreM10 × 60 screws


First stage	Tighten by hand
Replace screws.
Second stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Third stage	60°60°60°

expand_moreAll Audi gasoline straight-4 1.8 L CJEB engines


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll Audi gasoline straight-4 1.8 L CJED engines


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace screws.
Second stage	90°90°90°


All Audi diesel V6 3.0 L CLAB engines	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m

expand_moreAll Audi gasoline straight-4 2.0 L CNCD engines


First stage	Tighten bolt(s) until hand-tight.
Replace screws.
Second stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Third stage	90°90°90°

expand_moreAll other modifications

expand_moreM10 × 155 screws


First stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Replace screws.
Second stage	180°180°180°

expand_moreM10 × 40 screws


First stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Replace screws.
Second stage	60°60°60°

expand_moreM10 × 60 screws


First stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Replace screws.
Second stage	60°60°60°

expand_moreAir-conditioning compressor pressure line


M6	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
M8	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m

expand_moreAlternator

expand_moreAll Audi gasoline straight-4 2.0 L CNCD engines

expand_moreAluminium screws


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Use new screws.
Second stage	180°180°180°


Steel screws	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m


All other modifications	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m

expand_moreGenerator bracket

expand_moreAll Audi diesel straight-4 2.0 L CAGB engines

expand_moreM10 × 155 screws


First stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Replace screws.
Second stage	180°180°180°

expand_moreM10 × 40 screws


First stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Replace screws.
Second stage	60°60°60°

expand_moreM10 × 60 screws


First stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Replace screws.
Second stage	60°60°60°

expand_moreAll Audi gasoline straight-4 1.8 L CDHB engines


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace screws.
Second stage	90°90°90°


All Audi diesel V6 2.7 L CGKA engines	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
All Audi diesel V6 2.7 L CGKB engines	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m

expand_moreAll Audi diesel straight-4 2.0 L CGLC engines

expand_moreM10 × 155 screws


First stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Replace screws.
Second stage	180°180°180°

expand_moreM10 × 40 screws


First stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Replace screws.
Second stage	60°60°60°

expand_moreM10 × 60 screws


First stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Replace screws.
Second stage	60°60°60°

expand_moreAll Audi diesel straight-4 2.0 L CJCD engines

expand_moreM10 × 155 screws


First stage	Tighten by hand
Replace screws.
Second stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Third stage	180°180°180°

expand_moreM10 × 40 screws


First stage	Tighten by hand
Replace screws.
Second stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Third stage	60°60°60°

expand_moreM10 × 60 screws


First stage	Tighten by hand
Replace screws.
Second stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Third stage	60°60°60°

expand_moreAll Audi gasoline straight-4 1.8 L CJEB engines


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll Audi gasoline straight-4 1.8 L CJED engines


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace screws.
Second stage	90°90°90°


All Audi diesel V6 3.0 L CLAB engines	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m

expand_moreAll Audi gasoline straight-4 2.0 L CNCD engines


First stage	Tighten bolt(s) until hand-tight.
Replace screws.
Second stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Third stage	90°90°90°

expand_moreAll Audi diesel straight-4 2.0 L CNHA engines


First stage	Screw in screw manually up to stop.
Second stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m

expand_moreMedium screws at the bottom


Third stage	45°45°45°

expand_moreTop screws


Fourth stage	180°180°180°

expand_moreAll other modifications

expand_moreM10 × 155 screws


First stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Replace screws.
Second stage	180°180°180°

expand_moreM10 × 30 screws


First stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Replace screws.
Second stage	45°45°45°

expand_moreM10 × 40 screws


First stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreM10 × 52 screws


First stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreM10 × 60 screws


First stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Replace screws.
Second stage	90°90°90°

expand_morePower steering pump bracket

expand_moreAll Audi gasoline straight-4 1.8 L CDHB engines


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace screws.
Second stage	90°90°90°


All Audi diesel V6 2.7 L CGKA engines	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
All Audi diesel V6 2.7 L CGKB engines	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m

expand_moreHydraulic lines at the servo-steering pump


M6	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Union nuts	28.03 lbf⋅ft28.03 lbf⋅ft38 N⋅m


Servo pump pulley	16.23 lbf⋅ft16.23 lbf⋅ft22 N⋅m
Servo steering pump	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m

expand_moreVacuum pump


All Audi gasoline straight-4 1.8 L CJED engines	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m
All other modifications	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m

expand_moreCarburetion

expand_moreExhaust gas return cooler

expand_more2.0 TDI with diesel straight-4 2.0 L 188 HP engine (2013.9–)

expand_moreOn the engine block


First stage	Screw in screw manually up to stop.
Use new seals.
Second stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreExhaust gas return valve


2.0 TDI with diesel straight-4 2.0 L 188 HP engine (2013.9–)	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreFuel-distributing pipe


All Audi gasoline straight-4 1.8 L CJEB engines	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
All Audi gasoline straight-4 1.8 L CJED engines	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
All Audi gasoline straight-4 2.0 L CNCD engines	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
All Audi diesel straight-4 2.0 L CNHA engines	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
All other modifications	16.23 lbf⋅ft16.23 lbf⋅ft22 N⋅m

expand_moreHigh-pressure line

expand_moreAll Audi gasoline straight-4 1.8 L CJEB engines


Union nuts	19.91 lbf⋅ft19.91 lbf⋅ft27 N⋅m

expand_moreAll Audi gasoline straight-4 1.8 L CJED engines


Union nuts	19.91 lbf⋅ft19.91 lbf⋅ft27 N⋅m

expand_moreAll Audi gasoline straight-4 2.0 L CNCD engines


Union nuts	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m


All Audi diesel straight-4 2.0 L CNHA engines	20.65 lbf⋅ft20.65 lbf⋅ft28 N⋅m
All other modifications	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Check compressed air line.

expand_moreHigh-pressure pump


All Audi gasoline straight-4 2.0 L CDNB engines	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreAll Audi diesel straight-4 2.0 L CGLC engines

expand_moreM8 × 28 screws


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace screws.
Second stage	45°45°45°

expand_moreM8 × 90 screws


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace screws.
Second stage	180°180°180°

expand_moreAll Audi diesel straight-4 2.0 L CJCD engines

expand_moreM8 × 28 screws


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace screws.
Second stage	45°45°45°

expand_moreM8 × 90 screws


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace screws.
Second stage	180°180°180°

expand_moreAll Audi gasoline straight-4 1.8 L CJEB engines

expand_moreM6


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Second stage	90°90°90°


M8	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreAll Audi gasoline straight-4 1.8 L CJED engines

expand_moreM6


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Second stage	90°90°90°


M8	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m


All Audi diesel V6 3.0 L CLAB engines	16.23 lbf⋅ft16.23 lbf⋅ft22 N⋅m
All Audi gasoline straight-4 2.0 L CNCD engines	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreAll Audi diesel straight-4 2.0 L CNHA engines


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreSecond stage


Long screws	180°180°180°
Short screws	45°45°45°

expand_moreAll other modifications

expand_moreM8 × 28 screws


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreM8 × 90 screws


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace screws.
Second stage	180°180°180°

expand_moreHigh-pressure pump pulley

expand_moreAll Audi diesel straight-4 2.0 L CAGA engines


Central nuts	70.07 lbf⋅ft70.07 lbf⋅ft95 N⋅m
Wheel	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace bolts.


All Audi diesel V6 2.7 L CGKA engines	51.63 lbf⋅ft51.63 lbf⋅ft70 N⋅m
All Audi diesel V6 2.7 L CGKB engines	51.63 lbf⋅ft51.63 lbf⋅ft70 N⋅m

expand_moreAll Audi diesel straight-4 2.0 L CGLC engines


Central nuts	70.07 lbf⋅ft70.07 lbf⋅ft95 N⋅m
Screws	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace screws.

expand_moreAll Audi diesel straight-4 2.0 L CJCD engines


Central nuts	70.07 lbf⋅ft70.07 lbf⋅ft95 N⋅m
Wheel	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace bolts.

expand_moreAll Audi diesel V6 3.0 L CLAB engines


Central nuts	51.63 lbf⋅ft51.63 lbf⋅ft70 N⋅m


All Audi diesel straight-4 2.0 L CNHA engines	70.07 lbf⋅ft70.07 lbf⋅ft95 N⋅m

expand_moreAll other modifications


Central nuts	70.07 lbf⋅ft70.07 lbf⋅ft95 N⋅m
Wheel	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace screws.


Injection hoses	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Check compressed air line.

expand_moreInjection nozzle (injector)

expand_moreAll Audi diesel straight-4 2.0 L CGLC engines


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Replace screws.
Second stage	180°180°180°

expand_moreAll Audi diesel straight-4 2.0 L CJCD engines


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Replace screws.
Second stage	180°180°180°

expand_moreAll Audi diesel V6 3.0 L CLAB engines


Retaining clamp	10.33 lbf⋅ft10.33 lbf⋅ft14 N⋅m

expand_moreAll Audi diesel straight-4 2.0 L CNHA engines


First stage	1.48 lbf⋅ft1.48 lbf⋅ft2 N⋅m
Use new screws.
Second stage	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Third stage	180°180°180°

expand_moreAll other modifications


Nuts	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Screws	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m

expand_moreInjection pump

expand_moreAll Audi gasoline straight-4 1.8 L CDHB engines


High-pressure pump	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Replace screws.

expand_moreAll Audi gasoline straight-4 2.0 L CDNC engines


High-pressure pump	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_morePressure tube connection


All Audi gasoline straight-4 1.8 L CDHB engines	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m

expand_moreAll Audi gasoline straight-4 1.8 L CJED engines


On rail	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Lightly lubricate the screws thread.

expand_moreAll Audi gasoline straight-4 2.0 L CNCD engines


On high-pressure pump	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Replace components.
On rail	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Replace components.


All other modifications	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m

expand_moreCharging

expand_moreCharge air pipes


All Audi diesel V6 2.7 L CGKA engines	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
All Audi diesel V6 2.7 L CGKB engines	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
All Audi gasoline straight-4 1.8 L CJED engines	4.06 lbf⋅ft4.06 lbf⋅ft5.5 N⋅m
All Audi diesel straight-4 2.0 L CNHA engines	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m

expand_moreTurbo charger

expand_moreAll Audi diesel V6 2.7 L CGKB engines


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Replace screws.
Second stage	90°90°90°
Use hot screw paste


All Audi diesel straight-4 2.0 L CGLC engines	17.7 lbf⋅ft17.7 lbf⋅ft24 N⋅m
Replace nuts.
All Audi diesel straight-4 2.0 L CJCD engines	17.7 lbf⋅ft17.7 lbf⋅ft24 N⋅m
Replace nuts. Use hot screw paste.
All other modifications	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Replace the nuts and use fitting paste

expand_moreTurbocharger bracket

expand_moreAll Audi diesel straight-4 2.0 L CJCD engines


M10	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
M8	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m


All Audi gasoline straight-4 2.0 L CNCD engines	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m

expand_moreAll Audi diesel straight-4 2.0 L CNHA engines


First stage	Screw in new screw(s) manually as far as it goes.
Second stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreTurbocharger coolant feed line


2.0 TFSI with gasoline straight-4 2.0 L 221 HP at 4500 RPM, 350 N⋅m at 1500 RPM engine (2013.5–)	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m

expand_moreTurbocharger coolant return line


2.0 TFSI with gasoline straight-4 2.0 L 221 HP at 4500 RPM, 350 N⋅m at 1500 RPM engine (2013.5–)	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m

expand_moreTurbocharger oil feed line

expand_moreAll Audi diesel straight-4 2.0 L CJCD engines


Banjo screws	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Replace sealing rings.
Union nuts	16.23 lbf⋅ft16.23 lbf⋅ft22 N⋅m

expand_moreAll Audi gasoline straight-4 1.8 L CJED engines


At the turbocharger	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m


All Audi gasoline straight-4 2.0 L CNCD engines	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m

expand_moreAll Audi diesel straight-4 2.0 L CNHA engines


At the turbocharger	16.23 lbf⋅ft16.23 lbf⋅ft22 N⋅m
On the engine block	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m

expand_moreTurbocharger oil return line


All Audi diesel straight-4 2.0 L CJCD engines	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m

expand_moreAll Audi gasoline straight-4 1.8 L CJED engines


At the turbocharger	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
On the engine block	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m

expand_moreAll Audi gasoline straight-4 2.0 L CNCD engines


M6	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
M8	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m

expand_moreAll Audi diesel straight-4 2.0 L CNHA engines


At the turbocharger	10.33 lbf⋅ft10.33 lbf⋅ft14 N⋅m
On the engine block	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m

expand_moreCooling system

expand_moreCoolant pump


All Audi gasoline straight-4 1.8 L CDHB engines	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Tighten cross-wise.
All Audi gasoline straight-4 2.0 L CDNB engines	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Tighten cross-wise.
All Audi gasoline straight-4 2.0 L CDNC engines	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Tighten cross-wise.
All Audi diesel V6 2.7 L CGKA engines	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Gradually tighten screws crosswise.
All Audi diesel V6 2.7 L CGKB engines	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Gradually tighten screws crosswise.
All Audi gasoline straight-4 1.8 L CJEB engines	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Tighten cross-wise.
All Audi gasoline straight-4 1.8 L CJED engines	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Tighten screws crosswise.
All Audi diesel V6 3.0 L CLAB engines	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Gradually tighten screws crosswise.
All Audi gasoline straight-4 2.0 L CNCD engines	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m

expand_moreAll Audi diesel straight-4 2.0 L CNHA engines


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace screws.
Second stage	45°45°45°


All other modifications	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m


Coolant pump pulley	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m

expand_moreCoolant pump drive wheel


First stage	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Use new screw. (left-hand thread)
Second stage	90°90°90°

expand_moreFan wheel


All Audi diesel straight-4 2.0 L CJCD engines	2.95 lbf⋅ft2.95 lbf⋅ft4 N⋅m
All Audi gasoline straight-4 1.8 L CJED engines	2.58 lbf⋅ft2.58 lbf⋅ft3.5 N⋅m
All Audi gasoline straight-4 2.0 L CNCD engines	2.21 lbf⋅ft2.21 lbf⋅ft3 N⋅m
All Audi diesel straight-4 2.0 L CNHA engines	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m

expand_moreRadiator mounting


All Audi diesel straight-4 2.0 L CJCD engines	2.58 lbf⋅ft2.58 lbf⋅ft3.5 N⋅m
All Audi gasoline straight-4 1.8 L CJED engines	3.32 lbf⋅ft3.32 lbf⋅ft4.5 N⋅m
All Audi gasoline straight-4 2.0 L CNCD engines	2.58 lbf⋅ft2.58 lbf⋅ft3.5 N⋅m
All Audi diesel straight-4 2.0 L CNHA engines	2.58 lbf⋅ft2.58 lbf⋅ft3.5 N⋅m

expand_moreCylinder head

expand_moreCamshaft bearing

expand_moreAll Audi diesel straight-4 2.0 L CJCD engines


First stage	Tighten bolt(s) until hand-tight.
Note correct order of tensioning.
Second stage	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m

expand_moreAll Audi gasoline straight-4 1.8 L CJEB engines

expand_moreBearing casing


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Tighten new screws in inside-to-outside order.
Second stage	90°90°90°

expand_moreAll Audi gasoline straight-4 1.8 L CJED engines

expand_moreBearing casing


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Tighten new screws in inside-to-outside order.
Second stage	90°90°90°

expand_moreAll Audi diesel V6 3.0 L CLAB engines


First stage	Screw in screw(s) by hand.
Note correct order of tensioning.
Second stage	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m

expand_moreAll Audi gasoline straight-4 2.0 L CNCD engines

expand_moreBearing casing


First stage	Tighten bolt(s) until hand-tight.
Replace screws.
Second stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Third stage	90°90°90°

expand_moreAll Audi diesel straight-4 2.0 L CNHA engines


First stage	Tighten bolt(s) until hand-tight.
Second stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m


All other modifications	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Tighten gradually and alternately from inside to outside.

expand_moreCylinder head screws

expand_moreAll Audi diesel straight-4 2.0 L CAGA engines

expand_moreCAGA engine


First stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Replace screws.
Second stage	44.25 lbf⋅ft44.25 lbf⋅ft60 N⋅m
Third stage	90°90°90°
Fourth stage	90°90°90°

expand_moreCJCA engine


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Replace screws.
Second stage	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
Third stage	90°90°90°
Fourth stage	90°90°90°

expand_moreCMEA engine


First stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Replace screws.
Second stage	44.25 lbf⋅ft44.25 lbf⋅ft60 N⋅m
Third stage	90°90°90°
Fourth stage	90°90°90°

expand_moreCMFA engine


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Replace screws.
Second stage	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
Third stage	90°90°90°
Fourth stage	90°90°90°

expand_moreAll Audi gasoline straight-4 1.8 L CDHB engines

expand_moreScrews 1 – 10


First stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Replace screws.
Second stage	90°90°90°
Third stage	90°90°90°

expand_moreScrews 11 – 14

expand_moreFourth stage


First step	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Replace screws.
Second step	90°90°90°

expand_moreAll Audi gasoline straight-4 2.0 L CDNB engines

expand_moreScrews 1 – 8


First stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Replace screws.
Second stage	90°90°90°
Third stage	90°90°90°

expand_moreScrews 11 – 14

expand_moreFourth stage


First step	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Replace screws.
Second step	90°90°90°

expand_moreScrews 9 – 10


Fifth stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Replace screws.
Sixth stage	90°90°90°
Seventh stage	90°90°90°

expand_moreAll Audi diesel V6 2.7 L CGKB engines


First stage	Tighten by hand
Use new screws.
Second stage	25.81 lbf⋅ft25.81 lbf⋅ft35 N⋅m
Third stage	44.25 lbf⋅ft44.25 lbf⋅ft60 N⋅m
Fourth stage	90°90°90°
Fifth stage	90°90°90°

expand_moreAll Audi diesel straight-4 2.0 L CGLC engines


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Replace screws.
Second stage	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
Third stage	90°90°90°
Fourth stage	90°90°90°

expand_moreAll Audi diesel straight-4 2.0 L CJCD engines


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Replace screws.
Second stage	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
Third stage	90°90°90°
Fourth stage	90°90°90°

expand_moreAll Audi gasoline straight-4 1.8 L CJEB engines

expand_moreScrews 1 – 10


First stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Replace screws.
Second stage	90°90°90°
Third stage	90°90°90°

expand_moreScrew 11

expand_moreFourth stage


First step	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Replace screws.
Second step	90°90°90°

expand_moreAll Audi gasoline straight-4 1.8 L CJED engines

expand_moreScrews 1 – 10


First stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Replace screws.
Second stage	90°90°90°
Third stage	90°90°90°

expand_moreScrew 11


Fourth stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Replace screws.
Fifth stage	90°90°90°

expand_moreAll Audi diesel V6 3.0 L CLAB engines


First stage	Tighten by hand
Replace screws.
Second stage	25.81 lbf⋅ft25.81 lbf⋅ft35 N⋅m
Third stage	51.63 lbf⋅ft51.63 lbf⋅ft70 N⋅m
Fourth stage	90°90°90°
Fifth stage	90°90°90°

expand_moreAll Audi gasoline straight-4 2.0 L CNCD engines

expand_moreScrews 1 – 10


First stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Replace screws.
Second stage	90°90°90°
Third stage	90°90°90°

expand_moreScrew 11


Fourth stage	2.95 lbf⋅ft2.95 lbf⋅ft4 N⋅m
Replace screws.
Fifth stage	90°90°90°

expand_moreAll Audi diesel straight-4 2.0 L CNHA engines


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Replace screws.
Second stage	47.94 lbf⋅ft47.94 lbf⋅ft65 N⋅m
Third stage	90°90°90°
Fourth stage	90°90°90°

expand_moreAll other modifications


First stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Replace screws.
Second stage	44.25 lbf⋅ft44.25 lbf⋅ft60 N⋅m
Third stage	90°90°90°
Fourth stage	90°90°90°

expand_moreCylinder head screws shank length (new)


All Audi diesel V6 2.7 L CGKA engines	6.26 in6.26 in159 mm
All Audi diesel V6 2.7 L CGKB engines	6.26 in6.26 in159 mm
All other modifications	5.39 in5.39 in137 mm

expand_moreValve cover


All Audi diesel straight-4 2.0 L CAHA engines	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Gradually tighten screws crosswise.

expand_moreAll Audi gasoline straight-4 1.8 L CDHB engines

expand_moreAt the cylinder head

expand_moreBearing casing


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Tighten new screws in inside-to-outside order.
Second stage	90°90°90°


All Audi diesel V6 2.7 L CGKA engines	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
All Audi diesel V6 2.7 L CGKB engines	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m

expand_moreAll Audi diesel straight-4 2.0 L CGLC engines


First stage	Tighten by hand
Tighten cross-wise.
Second stage	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m


All Audi diesel straight-4 2.0 L CJCD engines	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Tighten the screws crosswise.

expand_moreAll Audi gasoline straight-4 1.8 L CJEB engines

expand_moreBearing casing


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Tighten new screws in inside-to-outside order.
Second stage	90°90°90°

expand_moreAll Audi gasoline straight-4 1.8 L CJED engines

expand_moreBearing casing


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Tighten new screws in inside-to-outside order.
Second stage	90°90°90°

expand_moreAll Audi diesel V6 3.0 L CLAB engines


First stage	Screw in screw(s) by hand.
Replace screws.

expand_moreSecond stage


First step	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Second step	90°90°90°


All Audi diesel straight-4 2.0 L CNHA engines	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Tighten the screws cross-wise from inside to outside.

expand_moreAll other modifications


First stage	Tighten by hand
Tighten cross-wise.
Second stage	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m

expand_moreEngine block

expand_moreBalance shaft gear wheel

expand_moreAll Audi diesel straight-4 2.0 L CAHB engines


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll Audi gasoline straight-4 1.8 L CDHB engines

expand_moreCoolant pump


First stage	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Use new screw. (left-hand thread)
Second stage	90°90°90°


On the engine block	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m


All Audi diesel V6 2.7 L CGKA engines	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m
All Audi diesel V6 2.7 L CGKB engines	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m

expand_moreAll Audi diesel straight-4 2.0 L CJCD engines


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll Audi gasoline straight-4 1.8 L CJEB engines

expand_moreCoolant pump


First stage	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Use new screw. (left-hand thread)
Second stage	90°90°90°

expand_moreAll Audi gasoline straight-4 1.8 L CJED engines


First stage	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Second stage	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Third stage	90°90°90°

expand_moreAll Audi diesel V6 3.0 L CLAB engines


Central screws	44.25 lbf⋅ft44.25 lbf⋅ft60 N⋅m

expand_moreCentral nuts


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Shaft must be replaced when the screw connection has been loosened.
Second stage	90°90°90°


Wheel	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m

expand_moreAll Audi gasoline straight-4 2.0 L CNCD engines

expand_moreBearing casing


First stage	2.95 lbf⋅ft2.95 lbf⋅ft4 N⋅m
Replace screws.
Second stage	45°45°45°

expand_moreAll other modifications

expand_moreBalance shaft module


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreBalance shaft module

expand_moreAll Audi diesel straight-4 2.0 L CJCD engines

expand_moreScrews 1 – 6


First stage	Screw in screw(s) finger tight.
Replace screws.
Second stage	4.43 lbf⋅ft4.43 lbf⋅ft6 N⋅m
Fifth stage	90°90°90°

expand_moreScrews 1 – 4


Third stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreScrews 5 – 6


Fourth stage	9.59 lbf⋅ft9.59 lbf⋅ft13 N⋅m

expand_moreAll Audi gasoline straight-4 1.8 L CJED engines


First stage	2.95 lbf⋅ft2.95 lbf⋅ft4 N⋅m
Replace screws.
Second stage	45°45°45°

expand_moreConnecting rod bearing

expand_moreAll Audi gasoline straight-4 2.0 L CDNB engines


First stage	33.19 lbf⋅ft33.19 lbf⋅ft45 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll Audi diesel V6 2.7 L CGKB engines


First stage	25.81 lbf⋅ft25.81 lbf⋅ft35 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll Audi diesel V6 3.0 L CLAB engines


First stage	25.81 lbf⋅ft25.81 lbf⋅ft35 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll Audi gasoline straight-4 2.0 L CNCD engines


First stage	33.19 lbf⋅ft33.19 lbf⋅ft45 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll Audi diesel straight-4 2.0 L CNHA engines


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Replace screws.
Second stage	90°90°90°
Oil screw head support and thread.

expand_moreAll other modifications


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Replace screws.
Second stage	90°90°90°


Crankcase ventilation	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Tighten screws crosswise.

expand_moreCrankshaft central screws

expand_moreAll Audi gasoline straight-4 1.8 L CDHB engines


First stage	110.63 lbf⋅ft110.63 lbf⋅ft150 N⋅m
Replace screws and oil sealing rings.
Second stage	90°90°90°

expand_moreAll Audi diesel straight-4 2.0 L CJCD engines


First stage	132.76 lbf⋅ft132.76 lbf⋅ft180 N⋅m
Use new screws.
Second stage	90°90°90°
Third stage	45°45°45°

expand_moreAll Audi gasoline straight-4 1.8 L CJEB engines


First stage	110.63 lbf⋅ft110.63 lbf⋅ft150 N⋅m
Replace screws and oil sealing rings.
Second stage	90°90°90°

expand_moreAll Audi gasoline straight-4 1.8 L CJED engines


First stage	110.63 lbf⋅ft110.63 lbf⋅ft150 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll Audi gasoline straight-4 2.0 L CNCD engines


First stage	110.63 lbf⋅ft110.63 lbf⋅ft150 N⋅m
Replace screws and oil sealing rings.
Second stage	90°90°90°

expand_moreAll Audi diesel straight-4 2.0 L CNHA engines


First stage	132.76 lbf⋅ft132.76 lbf⋅ft180 N⋅m
Replace screws.
Second stage	90°90°90°
Oil screw head support and thread.
Third stage	45°45°45°

expand_moreAll other modifications


First stage	132.76 lbf⋅ft132.76 lbf⋅ft180 N⋅m
Use new screw.
Second stage	90°90°90°
Third stage	45°45°45°

expand_moreDrive plate

expand_moreOn crankshaft


First stage	44.25 lbf⋅ft44.25 lbf⋅ft60 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreEngine block closure screws


3.0 TDI with diesel V6 3.0 L 201 HP at 3750 RPM, 400 N⋅m at 1250 RPM engine (2011.10–)	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m

expand_moreFlywheel

expand_moreAll Audi gasoline straight-4 1.8 L CJED engines


First stage	44.25 lbf⋅ft44.25 lbf⋅ft60 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll Audi gasoline straight-4 1.8 L CJEE engines


First stage	44.25 lbf⋅ft44.25 lbf⋅ft60 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll Audi diesel straight-4 2.0 L CNHA engines


First stage	44.25 lbf⋅ft44.25 lbf⋅ft60 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll other modifications


To drive plate	44.25 lbf⋅ft44.25 lbf⋅ft60 N⋅m
Replace screws.

expand_moreMain bearing

expand_moreAll Audi diesel straight-4 2.0 L CAHA engines


First stage	47.94 lbf⋅ft47.94 lbf⋅ft65 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll Audi gasoline straight-4 1.8 L CDHB engines

expand_moreCenter

expand_moreScrews


First stage	47.94 lbf⋅ft47.94 lbf⋅ft65 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreLateral-fitting screw


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll Audi gasoline straight-4 2.0 L CDNC engines


First stage	Tighten by hand
Replace screws.
Second stage	47.94 lbf⋅ft47.94 lbf⋅ft65 N⋅m
Tighten from inside to outside.
Third stage	90°90°90°

expand_moreLateral-fitting screw


Fourth stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace screws.
Fifth stage	90°90°90°

expand_moreAll Audi diesel straight-4 2.0 L CGLC engines

expand_moreBalance shaft module

expand_moreScrews 1 – 6


First stage	Screw in screw(s) by hand.
Replace screws.
Second stage	4.43 lbf⋅ft4.43 lbf⋅ft6 N⋅m
Fifth stage	90°90°90°

expand_moreScrews 5 – 6


Third stage	9.59 lbf⋅ft9.59 lbf⋅ft13 N⋅m

expand_moreScrews 1 – 4


Fourth stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreBearing cap


First stage	47.94 lbf⋅ft47.94 lbf⋅ft65 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll Audi diesel straight-4 2.0 L CJCD engines


First stage	47.94 lbf⋅ft47.94 lbf⋅ft65 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll Audi gasoline straight-4 1.8 L CJEB engines

expand_moreScrews M8 and M10


First stage	Tighten by hand
Replace screws.

expand_moreScrews (M10)

expand_moreSecond stage


First step	47.94 lbf⋅ft47.94 lbf⋅ft65 N⋅m
Second step	90°90°90°

expand_moreScrews (M8)

expand_moreThird stage


First step	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Second step	90°90°90°

expand_moreAll Audi gasoline straight-4 1.8 L CJED engines

expand_moreScrews M8 and M10


First stage	Tighten by hand
Replace screws.

expand_moreScrews (M10)


Second stage	47.94 lbf⋅ft47.94 lbf⋅ft65 N⋅m
Third stage	90°90°90°

expand_moreScrews (M8)


Fourth stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Fifth stage	90°90°90°

expand_moreAll Audi diesel V6 3.0 L CLAB engines


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Replace screws.

expand_moreSecond stage


First step	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
Second step	180°180°180°

expand_moreAll Audi gasoline straight-4 2.0 L CNCD engines

expand_moreScrews 1 – 11


First stage	Screw in screw(s) by hand.
Replace screws.

expand_moreScrews 1 – 10


Second stage	47.94 lbf⋅ft47.94 lbf⋅ft65 N⋅m
Third stage	90°90°90°

expand_moreScrew 11


Fourth stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Fifth stage	90°90°90°


All Audi diesel straight-4 2.0 L CNHA engines	Component must not be knocked down.

expand_moreAll other modifications

expand_moreBalance shaft module


First stage	4.43 lbf⋅ft4.43 lbf⋅ft6 N⋅m
Replace screws.

expand_moreBalance shaft module (M7)

expand_moreSecond stage


First step	9.59 lbf⋅ft9.59 lbf⋅ft13 N⋅m
Second step	90°90°90°

expand_moreBalance shaft module (M8)

expand_moreSecond stage


First step	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Second step	90°90°90°

expand_moreBearing cap


First stage	47.94 lbf⋅ft47.94 lbf⋅ft65 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreVibration damper

expand_moreAll Audi diesel V6 2.7 L CGKB engines


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll Audi diesel V6 3.0 L CLAB engines


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll other modifications


First stage	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreEngine control


Balance shaft timing chain guide rail	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Balance shaft timing chain tension rail	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreBottom part of the control unit housing

expand_moreAll Audi gasoline straight-4 2.0 L CNCD engines

expand_moreScrews 1 – 8


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Replace screws.
Second stage	45°45°45°

expand_moreAll other modifications


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Use new screws and tighten them crosswise.
Second stage	45°45°45°

expand_moreCamshaft adjuster

expand_moreAll Audi gasoline straight-4 1.8 L CDHB engines


Bearing casing	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Cap	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m

expand_moreInlet camshaft


Central screws	25.81 lbf⋅ft25.81 lbf⋅ft35 N⋅m
Left-hand thread

expand_moreOutlet camshaft

expand_moreCentral screws


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Use new screw.
Second stage	90°90°90°

expand_moreAll Audi gasoline straight-4 1.8 L CJEB engines

expand_moreBearing casing


First stage	2.95 lbf⋅ft2.95 lbf⋅ft4 N⋅m
Replace screws.
Second stage	180°180°180°


Cap	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m

expand_moreExhaust side


Central screws	25.81 lbf⋅ft25.81 lbf⋅ft35 N⋅m
Left-hand thread

expand_moreIntake-side


Central screws	25.81 lbf⋅ft25.81 lbf⋅ft35 N⋅m
Left-hand thread

expand_moreAll Audi gasoline straight-4 2.0 L CNCD engines

expand_moreBearing casing


First stage	2.95 lbf⋅ft2.95 lbf⋅ft4 N⋅m
Replace screws.
Second stage	180°180°180°

expand_moreCamshaft adjuster valve


First stage	2.95 lbf⋅ft2.95 lbf⋅ft4 N⋅m
Replace screws.
Second stage	45°45°45°


Central screws	25.81 lbf⋅ft25.81 lbf⋅ft35 N⋅m
Left-hand thread

expand_moreAll other modifications


Bearing casing	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Cap	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Central screws	25.81 lbf⋅ft25.81 lbf⋅ft35 N⋅m
Left-hand thread

expand_moreCamshaft drive belt deflection pulley

expand_moreAll Audi diesel straight-4 2.0 L CJCD engines

expand_moreM10


First stage	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
Use new screw.
Second stage	90°90°90°


M8	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreAll Audi diesel straight-4 2.0 L CNHA engines


Screws	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace bolt.
Stud screws	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m
Replace the stud bolt.
Otherwise	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace nuts.

expand_moreAll other modifications

expand_moreM10


First stage	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
Replace screws.
Second stage	90°90°90°


M8	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreCamshaft timing chain guide rail


2.0 TFSI with gasoline straight-4 2.0 L 221 HP at 4500 RPM, 350 N⋅m at 1500 RPM engine (2013.5–)	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreCamshaft timing chain slip rail

expand_moreAll Audi diesel V6 2.7 L CGKB engines


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll Audi diesel V6 3.0 L CLAB engines


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Replace screws.
Second stage	90°90°90°


All other modifications	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreCamshaft timing chain tensioner

expand_moreAll Audi diesel V6 2.7 L CGKB engines


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Use new screw.
Second stage	90°90°90°

expand_moreAll Audi gasoline straight-4 1.8 L CJED engines


First stage	2.95 lbf⋅ft2.95 lbf⋅ft4 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll Audi diesel V6 3.0 L CLAB engines


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll Audi gasoline straight-4 2.0 L CNCD engines


First stage	2.95 lbf⋅ft2.95 lbf⋅ft4 N⋅m
Replace screws.
Second stage	90°90°90°


All other modifications	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m

expand_moreCamshaft timing chain tensioning rail

expand_moreAll Audi diesel V6 2.7 L CGKB engines


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Replace screws.
Second stage	90°90°90°


All other modifications	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreCamshaft timing gear

expand_moreAll Audi diesel V6 2.7 L CGKB engines

expand_moreHigh pressure pump belt


Central screws	55.32 lbf⋅ft55.32 lbf⋅ft75 N⋅m


Otherwise	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m

expand_moreAll Audi diesel straight-4 2.0 L CGLC engines


Central screws	73.76 lbf⋅ft73.76 lbf⋅ft100 N⋅m
Wheel	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m

expand_moreAll Audi diesel straight-4 2.0 L CJCD engines


Central screws	73.76 lbf⋅ft73.76 lbf⋅ft100 N⋅m
Wheel	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Replace screws. Use screw-locking compound.


All Audi diesel V6 3.0 L CLAB engines	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m

expand_moreAll Audi diesel straight-4 2.0 L CNHA engines


Central screws	73.76 lbf⋅ft73.76 lbf⋅ft100 N⋅m
Clamping screws	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m

expand_moreAll other modifications


Central screws	73.76 lbf⋅ft73.76 lbf⋅ft100 N⋅m

expand_moreWheel


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace screws.
Second stage	45°45°45°

expand_moreControl drive chain tensioner


All Audi diesel V6 2.7 L CGKA engines	8.85 lbf⋅ft8.85 lbf⋅ft12 N⋅m
All Audi diesel V6 2.7 L CGKB engines	8.85 lbf⋅ft8.85 lbf⋅ft12 N⋅m

expand_moreAll Audi diesel V6 3.0 L CLAB engines


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Use new screw.
Second stage	90°90°90°


All other modifications	47.94 lbf⋅ft47.94 lbf⋅ft65 N⋅m

expand_moreControl drive chain tensioning rail


All Audi gasoline straight-4 2.0 L CDNB engines	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
All Audi gasoline straight-4 2.0 L CDNC engines	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
All Audi gasoline straight-4 1.8 L CJED engines	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
All Audi diesel V6 3.0 L CLAB engines	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m

expand_moreControl drive sprocket wheel


Left	33.19 lbf⋅ft33.19 lbf⋅ft45 N⋅m

expand_moreRight


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Use new screw.
Second stage	90°90°90°

expand_moreControl drive timing chain slip rail

expand_moreAll Audi diesel V6 2.7 L CGKB engines

expand_moreRight


Bottom	8.85 lbf⋅ft8.85 lbf⋅ft12 N⋅m

expand_moreTop


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Second stage	90°90°90°

expand_moreTop on the right side


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Second stage	90°90°90°

expand_moreAll Audi diesel V6 3.0 L CLAB engines


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Replace screws.
Second stage	90°90°90°


All other modifications	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreControl unit for intake valve timing


All Audi gasoline straight-4 1.8 L CJED engines	25.81 lbf⋅ft25.81 lbf⋅ft35 N⋅m
Use new screw. (left-hand thread)
All Audi gasoline straight-4 2.0 L CNCD engines	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m


Drive chain balance shaft tensioner	62.69 lbf⋅ft62.69 lbf⋅ft85 N⋅m
Use screw-locking compound.
Injection pump drive belt tensioning roller	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m

expand_moreIntermediate shaft chain sprocket

expand_moreAll Audi diesel straight-4 2.0 L CAHB engines


First stage	66.38 lbf⋅ft66.38 lbf⋅ft90 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll Audi gasoline straight-4 1.8 L CDHB engines


First stage	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Replace the screws and sprocket wheel.
Second stage	for freedom from play

expand_moreThird stage


First step	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Second step	90°90°90°

expand_moreAll Audi diesel straight-4 2.0 L CJCD engines


First stage	66.38 lbf⋅ft66.38 lbf⋅ft90 N⋅m
Replace the screws and sprocket wheel.
Second stage	90°90°90°

expand_moreAll Audi gasoline straight-4 1.8 L CJEB engines


First stage	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Replace screw and intermediate wheel when loosening the screw.
Second stage	for freedom from play

expand_moreThird stage


First step	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Second step	90°90°90°

expand_moreAll Audi gasoline straight-4 2.0 L CNCD engines


First stage	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Replace screw and intermediate wheel when loosening the screw.
Second stage	for freedom from play
Third stage	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Fourth stage	90°90°90°

expand_moreAll other modifications

expand_moreBalance shaft module


First stage	66.38 lbf⋅ft66.38 lbf⋅ft90 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreOil pump camshaft timing chain guide rail


1.8 TFSI with gasoline straight-4 1.8 L 142 HP engine (2014.9–)	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreOil pump drive chain tensioner


All Audi gasoline straight-4 1.8 L CJED engines	62.69 lbf⋅ft62.69 lbf⋅ft85 N⋅m

expand_moreAll Audi diesel V6 3.0 L CLAB engines


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Replace screws.
Second stage	90°90°90°


All other modifications	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m

expand_moreOutlet camshaft wheel

expand_moreCentral screws


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreTension rail bearing screws


All Audi diesel V6 2.7 L CGKA engines	8.85 lbf⋅ft8.85 lbf⋅ft12 N⋅m
All Audi diesel V6 2.7 L CGKB engines	8.85 lbf⋅ft8.85 lbf⋅ft12 N⋅m
All Audi diesel V6 3.0 L CLAB engines	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m

expand_moreTensioning chain of oil pump drive chain


1.8 TFSI with gasoline straight-4 1.8 L 142 HP engine (2014.9–)	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreTiming case cover

expand_more3.0 TDI with diesel V6 3.0 L 201 HP at 3750 RPM, 400 N⋅m at 1250 RPM engine (2011.10–)

expand_moreScrews 1 – 4


First stage	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m

expand_moreScrews 5 – 24


Second stage	2.21 lbf⋅ft2.21 lbf⋅ft3 N⋅m
Replace screws.
Third stage	2.21 lbf⋅ft2.21 lbf⋅ft3 N⋅m
Control tensioner
Fifth stage	90°90°90°

expand_moreScrews 5 – 10


Fourth stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m

expand_moreTiming case cover first cylinder row

expand_more3.0 TDI with diesel V6 3.0 L 201 HP at 3750 RPM, 400 N⋅m at 1250 RPM engine (2011.10–)


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Replace bolts and tighten crosswise.
Second stage	90°90°90°

expand_moreTiming case cover second cylinder row

expand_more3.0 TDI with diesel V6 3.0 L 201 HP at 3750 RPM, 400 N⋅m at 1250 RPM engine (2011.10–)


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Replace bolts and tighten crosswise.
Second stage	90°90°90°

expand_moreToothed belt guard


All Audi diesel straight-4 2.0 L CJCD engines	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
All Audi gasoline straight-4 1.8 L CJED engines	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m

expand_moreAll other modifications


Coolant pump	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m

expand_moreToothed belt guard at the bottom


All Audi diesel straight-4 2.0 L CJCD engines	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
All Audi diesel straight-4 2.0 L CNHA engines	8.85 lbf⋅ft8.85 lbf⋅ft12 N⋅m
All other modifications	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m

expand_moreToothed belt guard at the top


2.0 TDI with diesel straight-4 2.0 L 188 HP engine (2013.9–)	8.85 lbf⋅ft8.85 lbf⋅ft12 N⋅m


Toothed belt guard center	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m

expand_moreToothed belt tensioning roller

expand_moreAll Audi diesel V6 2.7 L CGKB engines

expand_moreHigh pressure pump belt


Central screws	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m

expand_moreAll Audi diesel straight-4 2.0 L CJCD engines


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Second stage	45°45°45°

expand_moreAll Audi diesel V6 3.0 L CLAB engines

expand_moreHigh pressure pump belt


Central screws	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m

expand_moreAll Audi diesel straight-4 2.0 L CNHA engines


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace nuts.
Second stage	45°45°45°
Stud screws	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m
Replace the stud bolt.

expand_moreAll other modifications


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace nuts.
Second stage	45°45°45°


Top part of control unit housing	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Tighten cross-wise.

expand_moreEngine lubrication

expand_moreOil cooler


All Audi gasoline straight-4 1.8 L CDHB engines	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m

expand_moreAll Audi gasoline straight-4 2.0 L CDNB engines


Heat-exchanger on oil filter housing	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m


All Audi gasoline straight-4 2.0 L CDNC engines	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m
All Audi diesel V6 2.7 L CGKA engines	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m
All Audi diesel V6 2.7 L CGKB engines	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m
All Audi diesel straight-4 2.0 L CGLC engines	8.11 lbf⋅ft8.11 lbf⋅ft11 N⋅m
All Audi diesel straight-4 2.0 L CJCD engines	8.11 lbf⋅ft8.11 lbf⋅ft11 N⋅m

expand_moreAll Audi gasoline straight-4 1.8 L CJEB engines


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Second stage	45°45°45°

expand_moreAll Audi gasoline straight-4 1.8 L CJED engines


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Second stage	45°45°45°


All Audi diesel V6 3.0 L CLAB engines	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m

expand_moreAll Audi gasoline straight-4 2.0 L CNCD engines


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Replace screws.
Second stage	45°45°45°


All Audi diesel straight-4 2.0 L CNHA engines	Component must not be knocked down.
All other modifications	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m

expand_moreOil drain plug

expand_moreAll Audi gasoline straight-4 2.0 L CNCD engines


Plastic oil sump	Tighten screw up to the stop.
Replace sealing rings.
Sheet-steel sump	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Replace sealing rings.


All other modifications	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Replace sealing rings.

expand_moreOil filter


All Audi gasoline straight-4 2.0 L CDNB engines	14.75–17.7 lbf⋅ft14.75–17.7 lbf⋅ft20–24 N⋅m
All Audi gasoline straight-4 2.0 L CDNC engines	14.75–17.7 lbf⋅ft14.75–17.7 lbf⋅ft20–24 N⋅m

expand_moreAll Audi diesel straight-4 2.0 L CNHA engines


Oil filter cover	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m

expand_moreAll other modifications


Oil filter cover	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Slightly oil sealing lips.

expand_moreOil filter housing

expand_moreAll Audi diesel straight-4 2.0 L CAHA engines


Cap	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m

expand_moreOn the engine block


First stage	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m
Tighten alternately starting from the top left
Second stage	90°90°90°
Replace screws.

expand_moreAll Audi diesel straight-4 2.0 L CAHB engines


Oil filter cover	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m

expand_moreOn the engine block


First stage	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m
Tighten alternately starting from the top left
Second stage	90°90°90°

expand_moreAll Audi diesel V6 2.7 L CGKB engines


Cap	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Otherwise	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m

expand_moreAll Audi diesel straight-4 2.0 L CGLC engines


Oil filter cover	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m

expand_moreOn the engine block


First stage	10.33 lbf⋅ft10.33 lbf⋅ft14 N⋅m
Tighten alternately starting from the top left
Second stage	90°90°90°

expand_moreAll Audi diesel straight-4 2.0 L CJCD engines

expand_moreOn the engine block


First stage	10.33 lbf⋅ft10.33 lbf⋅ft14 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll Audi gasoline straight-4 1.8 L CJEB engines


Oil filter cover	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m

expand_moreAll Audi gasoline straight-4 1.8 L CJED engines


First stage	Tighten by hand
Second stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Third stage	90°90°90°

expand_moreAll Audi diesel V6 3.0 L CLAB engines


Oil filter cover	25.81 lbf⋅ft25.81 lbf⋅ft35 N⋅m
On the engine block	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m

expand_moreAll Audi gasoline straight-4 2.0 L CNCD engines


First stage	Screw in screws by hand.
Use new screws and tighten them crosswise.
Second stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Third stage	90°90°90°

expand_moreAll Audi diesel straight-4 2.0 L CNHA engines


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Use new screws and tighten them crosswise.
Second stage	90°90°90°

expand_moreAll other modifications


Oil filter cover	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m

expand_moreOn the engine block


First stage	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m
Use new screws and tighten them crosswise.
Second stage	90°90°90°


Oil pressure sensor	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreOil pump


All Audi gasoline straight-4 1.8 L CDHB engines	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
All Audi gasoline straight-4 2.0 L CDNB engines	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
All Audi diesel straight-4 2.0 L CJCD engines	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m

expand_moreAll Audi gasoline straight-4 1.8 L CJED engines


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Second stage	90°90°90°

expand_moreAll Audi diesel straight-4 2.0 L CNHA engines


First stage	8.85 lbf⋅ft8.85 lbf⋅ft12 N⋅m
Replace screws.
Second stage	180°180°180°

expand_moreAll other modifications


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreOil pump chain wheel


All Audi diesel V6 2.7 L CGKA engines	47.2 lbf⋅ft47.2 lbf⋅ft64 N⋅m
All Audi diesel V6 2.7 L CGKB engines	47.2 lbf⋅ft47.2 lbf⋅ft64 N⋅m

expand_moreAll Audi diesel V6 3.0 L CLAB engines


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Replace screws.
Second stage	45°45°45°

expand_moreOil sump

expand_moreAll Audi diesel straight-4 2.0 L CAHA engines

expand_moreAt the gearbox


First stage	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreOn the engine block


M10	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
M7	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m
Gradually tighten screws crosswise.

expand_moreAll Audi gasoline straight-4 1.8 L CDHB engines

expand_moreOil sump lower part


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Replace screws.
Second stage	45°45°45°

expand_moreOil sump top part


First stage	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll Audi gasoline straight-4 2.0 L CDNC engines

expand_moreOil sump lower part


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Use new screws and tighten them crosswise.
Second stage	45°45°45°

expand_moreOil sump top part


First stage	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll Audi diesel V6 2.7 L CGKB engines

expand_moreAt the gearbox (M10)


First stage	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m
Replace screws.
Second stage	105°105°105°

expand_moreOil sump lower part


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Tighten the screws crosswise.
Second stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Replace screws.
Third stage	90°90°90°

expand_moreOil sump top part


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Replace screws.
Second stage	90°90°90°
Locking screws	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
TDC marking.

expand_moreOil sump top part on the engine block


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Tighten cross-wise.
Second stage	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m

expand_moreAll Audi diesel straight-4 2.0 L CGLC engines


M10	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
M7	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m
Gradually tighten screws crosswise.

expand_moreAll Audi diesel straight-4 2.0 L CJCD engines

expand_moreAt the gearbox (M10)


Second stage	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m
Third stage	90°90°90°

expand_moreOn the engine block


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
tighten gradually cross-wise

expand_moreOn the engine block (M10)


Fifth stage	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m

expand_moreOn the engine block (M7)


Fourth stage	9.59 lbf⋅ft9.59 lbf⋅ft13 N⋅m
tighten gradually cross-wise

expand_moreAll Audi gasoline straight-4 1.8 L CJEB engines

expand_moreOil sump top part

expand_moreScrews 1 – 14


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Replace screws.

expand_moreScrews 1 – 2


Second stage	180°180°180°

expand_moreScrews 3 – 9


Third stage	45°45°45°

expand_moreScrew 10


Fourth stage	180°180°180°

expand_moreScrews 11 – 14


Fifth stage	90°90°90°

expand_moreOil sump lower part

expand_morePlastic oil sump


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreSheet-steel sump


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll Audi gasoline straight-4 1.8 L CJED engines

expand_moreOil sump top part

expand_moreScrews 1 – 14


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Replace screws.

expand_moreScrews 1 – 2


Second stage	180°180°180°

expand_moreScrews 3 – 9


Third stage	45°45°45°

expand_moreScrew 10


Fourth stage	180°180°180°

expand_moreScrews 11 – 14


Fifth stage	90°90°90°

expand_moreOil sump lower part

expand_morePlastic oil sump


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreSheet-steel sump


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll Audi diesel V6 3.0 L CLAB engines

expand_moreAt the gearbox (M10)


First stage	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m
Replace screws.
Second stage	105°105°105°

expand_moreOil sump lower part


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Tighten the screws crosswise.
Second stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Replace screws.
Third stage	90°90°90°

expand_moreOil sump top part


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Replace screws.
Second stage	90°90°90°
Locking screws	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
TDC marking.

expand_moreOil sump top part on the engine block


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Tighten cross-wise.
Second stage	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m

expand_moreAll Audi gasoline straight-4 2.0 L CNCD engines

expand_moreOil sump lower part

expand_moreFrom sheet metal


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreWith plastic housing


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreOil sump top part

expand_moreScrews 1 – 14


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Replace screws.

expand_moreScrews 1 – 2


Second stage	180°180°180°

expand_moreScrews 3 – 9


Third stage	45°45°45°

expand_moreScrew 10


Fourth stage	180°180°180°

expand_moreScrews 11 – 14


Fifth stage	90°90°90°

expand_moreAll Audi diesel straight-4 2.0 L CNHA engines

expand_moreOn the engine block


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Second stage	9.59 lbf⋅ft9.59 lbf⋅ft13 N⋅m

expand_moreAt the gearbox


Third stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m

expand_moreAll other modifications

expand_moreAt the gearbox

expand_moreM10


First stage	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreOn the engine block


M10	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
M7	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m
Gradually tighten screws crosswise.

expand_moreEngine management


Camshaft sensor	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Use new screw.

expand_moreCharge air pressure sensor


All Audi diesel straight-4 2.0 L CNHA engines	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
All other modifications	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m

expand_moreCrankshaft sensor


All Audi diesel V6 2.7 L CGKA engines	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
All Audi diesel V6 2.7 L CGKB engines	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
All Audi gasoline straight-4 1.8 L CJEB engines	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
All Audi gasoline straight-4 1.8 L CJED engines	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
All Audi diesel V6 3.0 L CLAB engines	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
All Audi gasoline straight-4 2.0 L CNCD engines	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
All other modifications	3.32 lbf⋅ft3.32 lbf⋅ft4.5 N⋅m

expand_moreExhaust gas temperature sensor

expand_moreAll Audi diesel straight-4 2.0 L CJCD engines


At the turbocharger	33.19 lbf⋅ft33.19 lbf⋅ft45 N⋅m
On particle filter	44.25 lbf⋅ft44.25 lbf⋅ft60 N⋅m

expand_moreAll Audi diesel straight-4 2.0 L CNHA engines


On exhaust manifold	33.19 lbf⋅ft33.19 lbf⋅ft45 N⋅m
On particle filter	44.25 lbf⋅ft44.25 lbf⋅ft60 N⋅m

expand_moreGlow plugs

expand_moreAll Audi diesel straight-4 2.0 L CNHA engines


With combustion chamber pressure sensor	8.85 lbf⋅ft8.85 lbf⋅ft12 N⋅m
Without combustion chamber pressure sensor	12.54 lbf⋅ft12.54 lbf⋅ft17 N⋅m


All other modifications	12.54 lbf⋅ft12.54 lbf⋅ft17 N⋅m

expand_moreKnock sensor

expand_moreAll Audi gasoline straight-4 1.8 L CJED engines


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Second stage	90°90°90°

expand_moreAll Audi gasoline straight-4 2.0 L CNCD engines


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Replace screws.
Second stage	90°90°90°


All other modifications	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreLambda sensor


All Audi gasoline straight-4 1.8 L CDHB engines	40.57 lbf⋅ft40.57 lbf⋅ft55 N⋅m
All Audi gasoline straight-4 2.0 L CDNB engines	40.57 lbf⋅ft40.57 lbf⋅ft55 N⋅m
All Audi gasoline straight-4 2.0 L CDNC engines	40.57 lbf⋅ft40.57 lbf⋅ft55 N⋅m
All Audi diesel straight-4 2.0 L CGLC engines	40.57 lbf⋅ft40.57 lbf⋅ft55 N⋅m
All Audi diesel straight-4 2.0 L CJCD engines	40.57 lbf⋅ft40.57 lbf⋅ft55 N⋅m
All Audi gasoline straight-4 1.8 L CJEB engines	40.57 lbf⋅ft40.57 lbf⋅ft55 N⋅m
All Audi gasoline straight-4 1.8 L CJED engines	44.25 lbf⋅ft44.25 lbf⋅ft60 N⋅m
Use hot screw paste
All Audi diesel V6 3.0 L CLAB engines	40.57 lbf⋅ft40.57 lbf⋅ft55 N⋅m
All Audi gasoline straight-4 2.0 L CNCD engines	44.25 lbf⋅ft44.25 lbf⋅ft60 N⋅m
All Audi diesel straight-4 2.0 L CNHA engines	40.57 lbf⋅ft40.57 lbf⋅ft55 N⋅m
All other modifications	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m

expand_moreNOx sensor


2.0 TDI with diesel straight-4 2.0 L 188 HP engine (2013.9–)	40.57 lbf⋅ft40.57 lbf⋅ft55 N⋅m

expand_moreEngine mounting

expand_moreEngine bracket


On the engine block	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m

expand_moreEngine mounting

expand_moreAll Audi diesel straight-4 2.0 L CGLC engines


At the subframe	40.57 lbf⋅ft40.57 lbf⋅ft55 N⋅m

expand_moreOn engine bracket


First stage	66.38 lbf⋅ft66.38 lbf⋅ft90 N⋅m
Use new screw.
Second stage	90°90°90°

expand_moreAll other modifications


At the subframe	40.57 lbf⋅ft40.57 lbf⋅ft55 N⋅m

expand_moreOn engine bracket


First stage	66.38 lbf⋅ft66.38 lbf⋅ft90 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreSubframe

expand_moreAll Audi gasoline straight-4 1.8 L CDHB engines

expand_moreOn chassis


First stage	84.82 lbf⋅ft84.82 lbf⋅ft115 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll Audi diesel straight-4 2.0 L CGLC engines

expand_moreOn chassis


First stage	84.82 lbf⋅ft84.82 lbf⋅ft115 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll other modifications


First stage	84.82 lbf⋅ft84.82 lbf⋅ft115 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreSubframe diagonal strut

expand_moreAll Audi diesel straight-4 2.0 L CAHA engines

expand_moreM12 × 42 screws


First stage	66.38 lbf⋅ft66.38 lbf⋅ft90 N⋅m
Use new screws.
Second stage	135°135°135°

expand_moreM12 × 50 screws


First stage	66.38 lbf⋅ft66.38 lbf⋅ft90 N⋅m
Use new screws.
Second stage	90°90°90°

expand_moreAll Audi diesel straight-4 2.0 L CJCD engines


First stage	66.38 lbf⋅ft66.38 lbf⋅ft90 N⋅m
Use new screw.
Second stage	90°90°90°

expand_moreAll Audi gasoline straight-4 2.0 L CNCE engines


First stage	66.38 lbf⋅ft66.38 lbf⋅ft90 N⋅m
Use new screw.
Second stage	90°90°90°

expand_moreAll other modifications

expand_moreFirst stage


With electric servo-steering	66.38 lbf⋅ft66.38 lbf⋅ft90 N⋅m
Use new screw.
With hydraulic servo-steering	66.38 lbf⋅ft66.38 lbf⋅ft90 N⋅m
Use new screw.

expand_moreSecond stage


With electric servo-steering	90°90°90°
With hydraulic servo-steering	135°135°135°

expand_moreTorque arm


All Audi gasoline straight-4 2.0 L CDNB engines	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
All Audi gasoline straight-4 2.0 L CDNC engines	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m

expand_moreAll Audi diesel straight-4 2.0 L CJCD engines


At the subframe	40.57 lbf⋅ft40.57 lbf⋅ft55 N⋅m
On engine	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m

expand_moreAll Audi gasoline straight-4 1.8 L CJEB engines


On chassis	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
On engine sump	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m

expand_moreAll Audi gasoline straight-4 1.8 L CJED engines


On chassis	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
On engine sump	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m

expand_moreAll other modifications

expand_moreOn chassis


Cross support	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m


On the engine block	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m

expand_moreExhaust system

expand_moreCatalytic converter


All Audi gasoline straight-4 2.0 L CDNB engines	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Replace the nuts and use fitting paste
All Audi gasoline straight-4 2.0 L CDNC engines	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Replace the nuts and use fitting paste
All Audi gasoline straight-4 1.8 L CJED engines	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
All Audi gasoline straight-4 2.0 L CNCD engines	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Replace nuts. Use hot screw paste.
All other modifications	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m
Replace the nuts and use fitting paste


Catalytic converter bracket	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m

expand_moreDiesel particulate filter


All Audi diesel V6 2.7 L CGKA engines	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m
All Audi diesel straight-4 2.0 L CJCD engines	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m
Replace nuts. Use hot screw paste.

expand_moreAll Audi diesel straight-4 2.0 L CNHA engines


First stage	1.48 lbf⋅ft1.48 lbf⋅ft2 N⋅m
Second stage	5.16 lbf⋅ft5.16 lbf⋅ft7 N⋅m

expand_moreDifferential pressure sensor lines


2.0 TDI with diesel straight-4 2.0 L 188 HP engine (2013.9–)	33.19 lbf⋅ft33.19 lbf⋅ft45 N⋅m

expand_moreExhaust manifold

expand_moreAll Audi gasoline straight-4 1.8 L CDHB engines

expand_moreNuts


Bottom	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Replace nuts.

expand_moreTop nuts


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Replace nuts.
Second stage	8.85 lbf⋅ft8.85 lbf⋅ft12 N⋅m
Tighten cross-wise.
Third stage	11.8 lbf⋅ft11.8 lbf⋅ft16 N⋅m
Fourth stage	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m

expand_moreAll Audi gasoline straight-4 2.0 L CDNC engines


Bottom	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Replace the nuts and use fitting paste

expand_moreTop


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Replace nuts.
Second stage	8.85 lbf⋅ft8.85 lbf⋅ft12 N⋅m
Third stage	11.8 lbf⋅ft11.8 lbf⋅ft16 N⋅m
Fourth stage	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m

expand_moreAll Audi diesel V6 3.0 L CLAB engines


At the cylinder head	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Replace nuts. Use hot screw paste.

expand_moreAt the turbocharger


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Replace screws. Use hot screw paste.
Second stage	90°90°90°

expand_moreAll Audi diesel straight-4 2.0 L CNHA engines


First stage	8.11 lbf⋅ft8.11 lbf⋅ft11 N⋅m
Tighten screws from the inside outwards.
Second stage	16.23 lbf⋅ft16.23 lbf⋅ft22 N⋅m
Third stage	16.23 lbf⋅ft16.23 lbf⋅ft22 N⋅m
Control tensioner


All other modifications	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Replace the nuts and use fitting paste

expand_moreExhaust manifold heat shields


All Audi diesel straight-4 2.0 L CJCD engines	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
All Audi gasoline straight-4 1.8 L CJED engines	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
All Audi gasoline straight-4 2.0 L CNCD engines	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
All Audi diesel straight-4 2.0 L CNHA engines	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m

expand_moreExhaust pipe


All Audi gasoline straight-4 1.8 L CDHB engines	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Replace nuts.
All Audi gasoline straight-4 2.0 L CDNB engines	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Replace nuts.
All Audi gasoline straight-4 2.0 L CDNC engines	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Replace nuts.

expand_moreAll Audi diesel V6 2.7 L CGKB engines

expand_moreAt the exhaust manifold


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Replace nuts.
Second stage	90°90°90°

expand_moreAll Audi gasoline straight-4 1.8 L CJED engines


Clamps	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m

expand_moreAll Audi gasoline straight-4 2.0 L CNCD engines


Clamps	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Replace nuts.


All other modifications	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m
Replace nuts.


Exhaust pipe bracket	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m

expand_moreExhaust pipe rear


All Audi diesel straight-4 2.0 L CJCD engines	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m

expand_moreAll Audi gasoline straight-4 1.8 L CJED engines


Clamps	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m

expand_moreAll Audi gasoline straight-4 2.0 L CNCD engines


Clamps	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m


All Audi diesel straight-4 2.0 L CNHA engines	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m

expand_moreParticle filter bracket

expand_more2.0 TDI with diesel straight-4 2.0 L 188 HP engine (2013.9–)


First stage	1.48 lbf⋅ft1.48 lbf⋅ft2 N⋅m
Second stage	90°90°90°
slacken
Third stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_morePrimary catalytic converter


2.0 TDI with diesel straight-4 2.0 L 188 HP engine (2013.9–)	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m
Replace nuts.

expand_moreFuel supply


Fuel filter bracket	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m

expand_moreFuel lines

expand_moreAll Audi gasoline straight-4 1.8 L CDHB engines

expand_moreHigh-pressure side


Union nuts	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreAll Audi gasoline straight-4 2.0 L CDNB engines

expand_moreHigh-pressure side


Union nuts	19.91 lbf⋅ft19.91 lbf⋅ft27 N⋅m

expand_moreAll Audi gasoline straight-4 2.0 L CDNC engines


High-pressure side	19.91 lbf⋅ft19.91 lbf⋅ft27 N⋅m

expand_moreFuel pump

expand_more2.0 TDI with diesel straight-4 2.0 L 188 HP engine (2013.9–)


Preliminary feed pump	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m

expand_moreIgnition system


Spark plugs	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m

expand_moreStart system

expand_moreStarter

expand_moreAll Audi gasoline straight-4 1.8 L CDHB engines


M10 × 50 screws	47.94 lbf⋅ft47.94 lbf⋅ft65 N⋅m

expand_moreAll Audi diesel straight-4 2.0 L CJCD engines


M10	47.94 lbf⋅ft47.94 lbf⋅ft65 N⋅m

expand_moreM12 × 100 screws


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Second stage	90°90°90°

expand_moreAll Audi diesel V6 3.0 L CLAB engines


M10	47.94 lbf⋅ft47.94 lbf⋅ft65 N⋅m

expand_moreM12


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Second stage	90°90°90°

expand_moreAll Audi diesel straight-4 2.0 L CNHA engines


M10 × 50 screws	47.94 lbf⋅ft47.94 lbf⋅ft65 N⋅m

expand_moreAll other modifications


M10	47.94 lbf⋅ft47.94 lbf⋅ft65 N⋅m
Property class 10.9

expand_moreM12


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Replace screws.
Second stage	90°90°90°

Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2015 Audi A5 Sportback user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.

Before doing any DIY service please check your insurance policy and Audi warranty policy for your region. In some regions DIY service may invalidate your warranty.

Maintenance Items

Engine Fastener Tightening Specifications
Front Suspension Fastener Tightening Specifications
Rear Suspension Fastener Tightening Specifications
Transmission Fastener Tightening Specifications

Service Intervals

Conquer your fears and never give up!

DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Audi A5 Sportback service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.

Doing basic service for your 2015 Audi A5 Sportback you're not only saving money, but also also improving your technical skills and learning something new.

2015 Audi A5 Sportback First generation facelift Engine Fastener Tightening Specifications

Table of Contents

Conquer your fears and never give up!

Audi A5 Sportback First generation facelift model years

Suggest edit