2016 Audi A5 Cabriolet Quattro First generation facelift Engine Fastener Tightening Specifications
in your garage to make future searches easy.
Condition | Value |
---|
Lower section of intake manifold | 6.64 lbf⋅ft |
Upper section of intake manifold | 5.9 lbf⋅ft |
Lower section of intake manifold | 6.64 lbf⋅ft |
tighten gradually cross-wise | |
Upper section of intake manifold | 6.64 lbf⋅ft |
All Audi diesel straight-4 2.0 L CGLC engines | 2.95 lbf⋅ft |
First stage | Screw in new screw(s) manually as far as it goes. |
Second stage | 14.75 lbf⋅ft |
Third stage | 90° |
First stage | 2.21 lbf⋅ft |
Second stage | 7.38 lbf⋅ft |
All other modifications | 6.64 lbf⋅ft |
Nuts | 7.38 lbf⋅ft |
Screws | 14.75 lbf⋅ft |
First stage | Screw in screw manually up to stop. |
Second stage | 14.75 lbf⋅ft |
Nuts | 7.38 lbf⋅ft |
Screws | 14.75 lbf⋅ft |
All Audi gasoline V6 3.2 L CALA engines | 29.5 lbf⋅ft |
All Audi diesel V6 3.0 L CCWA engines | 16.96 lbf⋅ft |
All Audi diesel V6 3.0 L CDUC engines | 16.96 lbf⋅ft |
First stage | 14.75 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
All Audi diesel V6 3.0 L CKVC engines | 16.96 lbf⋅ft |
Compressor belt | 30.98 lbf⋅ft |
Otherwise | 29.5 lbf⋅ft |
All other modifications | 14.75 lbf⋅ft |
First stage | 36.88 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
M8 | 16.96 lbf⋅ft |
First stage | 36.88 lbf⋅ft |
Use new screw. | |
Second stage | 90° |
First stage | 14.75 lbf⋅ft |
Second stage | 180° |
Compressor belt | 29.5 lbf⋅ft |
Otherwise | 29.5 lbf⋅ft |
First stage | 5.9 lbf⋅ft |
Replace screws. | |
Second stage | 45° |
First stage | 14.75 lbf⋅ft |
Second stage | 90° |
First stage | 5.9 lbf⋅ft |
Replace screws. | |
Second stage | 45° |
All other modifications | 29.5 lbf⋅ft |
First stage | 5.9 lbf⋅ft |
Replace screws. | |
Second stage | 180° |
Steel screws | 18.44 lbf⋅ft |
First stage | 5.9 lbf⋅ft |
Replace screws. | |
Second stage | 180° |
Steel screws | 18.44 lbf⋅ft |
All other modifications | 18.44 lbf⋅ft |
All Audi gasoline V6 3.2 L CALA engines | 14.75 lbf⋅ft |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 180° |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 60° |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 60° |
First stage | Tighten bolt(s) until hand-tight. |
Replace screws. | |
Second stage | 14.75 lbf⋅ft |
Third stage | 90° |
First stage | Tighten bolt(s) until hand-tight. |
Replace screws. | |
Second stage | 14.75 lbf⋅ft |
Third stage | 90° |
All other modifications | 29.5 lbf⋅ft |
M6 | 6.64 lbf⋅ft |
M8 | 18.44 lbf⋅ft |
First stage | 5.9 lbf⋅ft |
Use new screws. | |
Second stage | 180° |
Steel screws | 16.96 lbf⋅ft |
First stage | 5.9 lbf⋅ft |
Use new screws. | |
Second stage | 180° |
Steel screws | 16.96 lbf⋅ft |
All other modifications | 16.96 lbf⋅ft |
First stage | 14.75 lbf⋅ft |
Tighten cross-wise. | |
Second stage | 90° |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 180° |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 60° |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 60° |
First stage | Tighten bolt(s) until hand-tight. |
Replace screws. | |
Second stage | 14.75 lbf⋅ft |
Third stage | 90° |
First stage | Screw in screw manually up to stop. |
Second stage | 29.5 lbf⋅ft |
Third stage | 45° |
Fourth stage | 180° |
First stage | Tighten bolt(s) until hand-tight. |
Replace screws. | |
Second stage | 14.75 lbf⋅ft |
Third stage | 90° |
All other modifications | 29.5 lbf⋅ft |
3.2 FSI quattro with gasoline V6 3.2 L 261 HP engine (2009.3–) | 14.75 lbf⋅ft |
Screws | 6.64 lbf⋅ft |
Union nuts | 28.03 lbf⋅ft |
Servo pump pulley | 16.23 lbf⋅ft |
All Audi gasoline V6 3.2 L CALA engines | 14.75 lbf⋅ft |
All other modifications | 18.44 lbf⋅ft |
Vacuum pump | 6.64 lbf⋅ft |
First stage | Screw in screw manually up to stop. |
Use new seals. | |
Second stage | 14.75 lbf⋅ft |
2.0 TDI quattro with diesel straight-4 2.0 L 188 HP engine (2013.9–) | 14.75 lbf⋅ft |
All Audi gasoline V6 3.2 L CALA engines | 6.64 lbf⋅ft |
All Audi gasoline V6 3.0 L CMUA engines | 6.64 lbf⋅ft |
All Audi gasoline straight-4 2.0 L CNCD engines | 6.64 lbf⋅ft |
All Audi diesel straight-4 2.0 L CNHA engines | 14.75 lbf⋅ft |
All Audi gasoline straight-4 2.0 L CPMB engines | 6.64 lbf⋅ft |
All other modifications | 16.23 lbf⋅ft |
All Audi diesel straight-4 2.0 L CGLC engines | 18.44 lbf⋅ft |
Union nuts | 14.75 lbf⋅ft |
All Audi diesel straight-4 2.0 L CNHA engines | 20.65 lbf⋅ft |
All other modifications | 19.91 lbf⋅ft |
All Audi gasoline V6 3.2 L CALA engines | 6.64 lbf⋅ft |
All Audi diesel V6 3.0 L CDUC engines | 16.23 lbf⋅ft |
First stage | 14.75 lbf⋅ft |
Replace screws. | |
Second stage | 45° |
First stage | 14.75 lbf⋅ft |
Replace screws. | |
Second stage | 180° |
All Audi diesel V6 3.0 L CKVC engines | 16.23 lbf⋅ft |
First stage | 14.75 lbf⋅ft |
Long screws | 180° |
Short screws | 45° |
All other modifications | 14.75 lbf⋅ft |
Tighten bolts uniformly in several passes. |
Central nuts | 51.63 lbf⋅ft |
Central nuts | 70.07 lbf⋅ft |
Screws | 14.75 lbf⋅ft |
Replace screws. |
All Audi diesel straight-4 2.0 L CNHA engines | 70.07 lbf⋅ft |
All other modifications | 51.63 lbf⋅ft |
All Audi gasoline V6 3.2 L CALA engines | 19.91 lbf⋅ft |
All other modifications | 18.44 lbf⋅ft |
All Audi diesel V6 3.0 L CDUC engines | 10.33 lbf⋅ft |
First stage | 5.9 lbf⋅ft |
Replace screws. | |
Second stage | 180° |
All Audi diesel V6 3.0 L CKVC engines | 10.33 lbf⋅ft |
First stage | 1.48 lbf⋅ft |
Use new screws. | |
Second stage | 6.64 lbf⋅ft |
Third stage | 180° |
M6 | 6.64 lbf⋅ft |
M8 | 16.96 lbf⋅ft |
High-pressure pump | 14.75 lbf⋅ft |
On high-pressure pump | 29.5 lbf⋅ft |
Replace components. | |
On rail | 29.5 lbf⋅ft |
Replace components. |
All Audi gasoline straight-4 2.0 L CPMB engines | 29.5 lbf⋅ft |
Replace components. |
All Audi diesel V6 3.0 L CCWA engines | 6.64 lbf⋅ft |
All Audi diesel straight-4 2.0 L CNHA engines | 5.9 lbf⋅ft |
Nuts | 14.75 lbf⋅ft |
Stud screws | 12.54 lbf⋅ft |
First stage | 22.13 lbf⋅ft |
Replace bolts. Use mounting lubricant. | |
Second stage | 90° |
All Audi diesel straight-4 2.0 L CGLC engines | 17.7 lbf⋅ft |
Replace nuts. | |
All Audi gasoline straight-4 2.0 L CNCD engines | 18.44 lbf⋅ft |
Replace screws. Use hot screw paste. |
All Audi gasoline straight-4 2.0 L CNCD engines | 22.13 lbf⋅ft |
First stage | Screw in new screw(s) manually as far as it goes. |
Second stage | 14.75 lbf⋅ft |
All Audi gasoline straight-4 2.0 L CPMB engines | 22.13 lbf⋅ft |
All Audi gasoline straight-4 2.0 L CNCD engines | 6.64 lbf⋅ft |
Banjo screws | 25.81 lbf⋅ft |
Replace sealing rings. |
All Audi gasoline straight-4 2.0 L CNCD engines | 6.64 lbf⋅ft |
Banjo screws | 25.81 lbf⋅ft |
Replace sealing rings. |
All Audi gasoline straight-4 2.0 L CNCD engines | 6.64 lbf⋅ft |
At the turbocharger | 16.23 lbf⋅ft |
On the engine block | 22.13 lbf⋅ft |
Banjo screws | 22.13 lbf⋅ft |
Replace sealing rings. | |
Screws | 6.64 lbf⋅ft |
Replace sealing rings. |
M6 | 6.64 lbf⋅ft |
M8 | 18.44 lbf⋅ft |
At the turbocharger | 10.33 lbf⋅ft |
On the engine block | 7.38 lbf⋅ft |
All Audi gasoline straight-4 2.0 L CPMB engines | 6.64 lbf⋅ft |
Replace sealing rings. |
All Audi diesel straight-4 2.0 L CGLC engines | 11.06 lbf⋅ft |
First stage | 14.75 lbf⋅ft |
Replace screws. | |
Second stage | 45° |
All other modifications | 6.64 lbf⋅ft |
Gradually tighten screws crosswise. |
All Audi gasoline V6 3.2 L CALA engines | 14.75 lbf⋅ft |
All Audi gasoline V6 3.0 L CMUA engines | 14.75 lbf⋅ft |
All other modifications | 16.96 lbf⋅ft |
First stage | 7.38 lbf⋅ft |
Use new screw. (left-hand thread) | |
Second stage | 90° |
All Audi gasoline straight-4 2.0 L CNCD engines | 2.21 lbf⋅ft |
All Audi gasoline straight-4 2.0 L CPMB engines | 2.21 lbf⋅ft |
All other modifications | 3.69 lbf⋅ft |
Radiator mounting | 2.58 lbf⋅ft |
First stage | Screw in screw(s) by hand. |
Replace screws. |
First step | 5.9 lbf⋅ft |
Second step | 90° |
First stage | 5.9 lbf⋅ft |
Tighten from inside to outside. | |
Second stage | 90° |
First stage | Screw in screw(s) by hand. |
Note correct order of tensioning. | |
Second stage | 6.64 lbf⋅ft |
All Audi diesel straight-4 2.0 L CGLC engines | 7.38 lbf⋅ft |
Tighten gradually and alternately from inside to outside. |
First stage | Screw in screw(s) by hand. |
Use new screws. |
First step | 5.9 lbf⋅ft |
Second step | 90° |
First stage | Tighten bolt(s) until hand-tight. |
Replace screws. | |
Second stage | 5.9 lbf⋅ft |
Third stage | 90° |
First stage | Tighten bolt(s) until hand-tight. |
Second stage | 5.9 lbf⋅ft |
First stage | Tighten bolt(s) until hand-tight. |
Replace screws. | |
Second stage | 5.9 lbf⋅ft |
Third stage | 90° |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
Third stage | 90° |
Fourth stage | 29.5 lbf⋅ft |
Replace screws. | |
Fifth stage | 90° |
Sixth stage | 90° |
Seventh stage | 6.64 lbf⋅ft |
First stage | 25.81 lbf⋅ft |
Use new screws | |
Second stage | 44.25 lbf⋅ft |
Third stage | 90° |
Fourth stage | 90° |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
Third stage | 90° |
First step | 5.9 lbf⋅ft |
Replace screws. | |
Second step | 90° |
Fifth stage | 29.5 lbf⋅ft |
Replace screws. | |
Sixth stage | 90° |
Seventh stage | 90° |
First stage | Tighten by hand |
Replace screws. | |
Second stage | 25.81 lbf⋅ft |
Third stage | 51.63 lbf⋅ft |
Fourth stage | 90° |
Fifth stage | 90° |
First stage | 22.13 lbf⋅ft |
Replace screws. | |
Second stage | 36.88 lbf⋅ft |
Third stage | 90° |
Fourth stage | 90° |
First step | 2.21 lbf⋅ft |
Replace screws. | |
Second step | 90° |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
Third stage | 90° |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
Third stage | 90° |
Fourth stage | 2.95 lbf⋅ft |
Replace screws. | |
Fifth stage | 90° |
First stage | 22.13 lbf⋅ft |
Replace screws. | |
Second stage | 47.94 lbf⋅ft |
Third stage | 90° |
Fourth stage | 90° |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
Third stage | 90° |
Fourth stage | 5.9 lbf⋅ft |
Replace screws. | |
Fifth stage | 90° |
3.0 TDI quattro with diesel V6 3.0 L 236 HP at 4000 RPM, 500 N⋅m at 1500 RPM engine (2009.3–) | 6.26 in |
First stage | 5.9 lbf⋅ft |
Tighten new screws in inside-to-outside order. | |
Second stage | 90° |
First stage | Screw in screw(s) by hand. |
Replace screws. |
First step | 5.9 lbf⋅ft |
Second step | 90° |
First stage | Tighten by hand |
Tighten cross-wise. | |
Second stage | 6.64 lbf⋅ft |
All other modifications | 6.64 lbf⋅ft |
Tighten the screws cross-wise from inside to outside. |
Valve cover locking screws | 3.69 lbf⋅ft |
Central screws | 44.25 lbf⋅ft |
First stage | 11.06 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
All Audi diesel V6 3.0 L CCWA engines | 16.96 lbf⋅ft |
First stage | 7.38 lbf⋅ft |
Use new screw. (left-hand thread) | |
Second stage | 90° |
On the engine block | 6.64 lbf⋅ft |
Central screws | 44.25 lbf⋅ft |
First stage | 22.13 lbf⋅ft |
Shaft must be replaced when the screw connection has been loosened. | |
Second stage | 90° |
Wheel | 16.96 lbf⋅ft |
First stage | 14.75 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
Central screws | 44.25 lbf⋅ft |
First stage | 11.06 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 2.95 lbf⋅ft |
Replace screws. | |
Second stage | 45° |
Bearing casing | 6.64 lbf⋅ft |
Replace screws. |
First stage | 22.13 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 25.81 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 25.81 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 22.13 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 36.88 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 22.13 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
Oil screw head support and thread. |
First stage | 33.19 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
All Audi gasoline straight-4 2.0 L CNCD engines | 6.64 lbf⋅ft |
Tighten screws crosswise. |
On the engine block | 6.64 lbf⋅ft |
Tighten screws crosswise. |
First stage | 132.76 lbf⋅ft |
Use new screw. | |
Second stage | 90° |
Third stage | 45° |
First stage | 132.76 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
Oil screw head support and thread. | |
Third stage | 45° |
First stage | 110.63 lbf⋅ft |
Replace screws and oil sealing rings. | |
Second stage | 90° |
First stage | 14.75 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 44.25 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
All Audi diesel V6 3.0 L CDUC engines | 18.44 lbf⋅ft |
All Audi diesel V6 3.0 L CKVC engines | 18.44 lbf⋅ft |
All Audi gasoline V6 3.0 L CMUA engines | 10.33 lbf⋅ft |
Replace sealing rings. |
First stage | 44.25 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
0B2 gearbox | 44.25 lbf⋅ft |
Replace screws. |
To drive plate | 44.25 lbf⋅ft |
Replace screws. |
First stage | 36.88 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
Screws 17 – 31 | 16.96 lbf⋅ft |
First stage | 22.13 lbf⋅ft |
first tighten crosswise inside, then outside | |
Second stage | 36.88 lbf⋅ft |
Replace screws. | |
Third stage | 90° |
Fourth stage | 14.75 lbf⋅ft |
Fifth stage | 90° |
First stage | Tighten by hand |
Tighten from inside to outside. | |
Second stage | 47.94 lbf⋅ft |
Replace screws. | |
Third stage | 90° |
First stage | 22.13 lbf⋅ft |
Replace screws. |
First step | 36.88 lbf⋅ft |
Second step | 180° |
Fourth stage | 14.75 lbf⋅ft |
First stage | Screw in screw(s) by hand. |
Replace screws. | |
Second stage | 4.43 lbf⋅ft |
Fifth stage | 90° |
Third stage | 9.59 lbf⋅ft |
First stage | 47.94 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First step | 36.88 lbf⋅ft |
Replace screws. | |
Second step | 90° |
Second stage | 16.96 lbf⋅ft |
First stage | Screw in screw(s) by hand. |
Replace screws. |
Second stage | 47.94 lbf⋅ft |
Third stage | 90° |
Fourth stage | 14.75 lbf⋅ft |
Fifth stage | 90° |
All Audi diesel straight-4 2.0 L CNHA engines | Component must not be knocked down. |
First stage | Screw in screw(s) by hand. |
Replace screws. |
Second stage | 47.94 lbf⋅ft |
Third stage | 90° |
Fourth stage | 14.75 lbf⋅ft |
Fifth stage | 90° |
First stage | 7.38 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 7.38 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 14.75 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
Balance shaft timing chain guide rail | 14.75 lbf⋅ft |
Balance shaft timing chain tension rail | 14.75 lbf⋅ft |
First stage | 3.69 lbf⋅ft |
Tighten cross-wise. |
Second stage | 6.64 lbf⋅ft |
Third stage | 16.96 lbf⋅ft |
First stage | 5.9 lbf⋅ft |
Replace screws. | |
Second stage | 45° |
First stage | 5.9 lbf⋅ft |
Replace screws. | |
Second stage | 45° |
First stage | 2.95 lbf⋅ft |
Replace screws. | |
Second stage | 45° |
First stage | 5.9 lbf⋅ft |
Use new screws and tighten them crosswise. | |
Second stage | 45° |
First stage | 59 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 2.95 lbf⋅ft |
Replace screws. | |
Second stage | 180° |
First stage | 2.95 lbf⋅ft |
Replace screws. | |
Second stage | 45° |
Central screws | 25.81 lbf⋅ft |
Left-hand thread |
Bearing casing | 6.64 lbf⋅ft |
Camshaft adjuster valve | 6.64 lbf⋅ft |
Central screws | 25.81 lbf⋅ft |
Use new screw. (left-hand thread) |
First stage | 14.75 lbf⋅ft |
Use new screw. | |
Second stage | 90° |
Bearing casing | 6.64 lbf⋅ft |
Cap | 6.64 lbf⋅ft |
Central screws | 25.81 lbf⋅ft |
Left-hand thread |
First stage | 36.88 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
M8 | 14.75 lbf⋅ft |
Screws | 14.75 lbf⋅ft |
Replace bolt. | |
Stud screws | 11.06 lbf⋅ft |
Replace the stud bolt. | |
Otherwise | 14.75 lbf⋅ft |
Replace nuts. |
Camshaft timing chain guide rail | 14.75 lbf⋅ft |
All Audi gasoline straight-4 2.0 L CAEB engines | 14.75 lbf⋅ft |
All Audi gasoline straight-4 2.0 L CDNC engines | 14.75 lbf⋅ft |
First stage | 3.69 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 3.69 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 3.69 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 2.95 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
All other modifications | 6.64 lbf⋅ft |
First stage | 3.69 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
All other modifications | 14.75 lbf⋅ft |
Central screws | 55.32 lbf⋅ft |
Otherwise | 16.96 lbf⋅ft |
Central screws | 73.76 lbf⋅ft |
Wheel | 18.44 lbf⋅ft |
Central screws | 73.76 lbf⋅ft |
Clamping screws | 6.64 lbf⋅ft |
All other modifications | 16.96 lbf⋅ft |
All Audi gasoline V6 3.2 L CALA engines | 6.64 lbf⋅ft |
All Audi diesel V6 3.0 L CCWA engines | 8.85 lbf⋅ft |
First stage | 3.69 lbf⋅ft |
Use new screw. | |
Second stage | 90° |
All Audi gasoline V6 3.0 L CMUA engines | 6.64 lbf⋅ft |
All other modifications | 47.94 lbf⋅ft |
Screw with bearing bush | 8.85 lbf⋅ft |
Use screw-locking compound. |
All Audi diesel V6 3.0 L CDUC engines | 16.96 lbf⋅ft |
All Audi diesel V6 3.0 L CKVC engines | 16.96 lbf⋅ft |
First stage | 5.9 lbf⋅ft |
Replace screws. | |
Second stage | 45° |
First stage | 22.13 lbf⋅ft |
Use new screw. | |
Second stage | 90° |
First stage | 4.43 lbf⋅ft |
Use new screw. | |
Second stage | 60° |
M10 | 33.19 lbf⋅ft |
First stage | 3.69 lbf⋅ft |
Use new screw. | |
Second stage | 90° |
First stage | 3.69 lbf⋅ft |
Replace screws. | |
Second stage | 60° |
First stage | 5.9 lbf⋅ft |
Replace screws. | |
Second stage | 45° |
First stage | 22.13 lbf⋅ft |
Use new screw. | |
Second stage | 90° |
First stage | 7.38 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
Screw with bearing bush | 8.85 lbf⋅ft |
Use screw-locking compound. |
First stage | 3.69 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 7.38 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 3.69 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
2.0 TFSI quattro with gasoline straight-4 2.0 L 221 HP at 4500 RPM, 350 N⋅m at 1500 RPM engine (2013.5–) | 3.69 lbf⋅ft |
First stage | 7.38 lbf⋅ft |
Replace screws. | |
Second stage | 45° |
First stage | 7.38 lbf⋅ft |
Replace screws. | |
Second stage | 45° |
All other modifications | 62.69 lbf⋅ft |
3.0 TDI quattro with diesel V6 3.0 L 236 HP at 4000 RPM, 500 N⋅m at 1500 RPM engine (2009.3–) | 16.96 lbf⋅ft |
First stage | 59 lbf⋅ft |
Use new screw. | |
Second stage | 90° |
First stage | 66.38 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 7.38 lbf⋅ft |
Replace screw and intermediate wheel when loosening the screw. | |
Second stage | for freedom from play |
Third stage | 18.44 lbf⋅ft |
Fourth stage | 90° |
First stage | 7.38 lbf⋅ft |
Replace screw and intermediate wheel when loosening the screw. | |
Second stage | for freedom from play |
Third stage | 18.44 lbf⋅ft |
Fourth stage | 90° |
First stage | 7.38 lbf⋅ft |
Replace the screws and sprocket wheel. | |
Second stage | for freedom from play |
First step | 18.44 lbf⋅ft |
Second step | 90° |
First stage | 7.38 lbf⋅ft |
Replace screws. | |
Second stage | 45° |
First stage | 3.69 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 7.38 lbf⋅ft |
Replace screws. | |
Second stage | 45° |
All other modifications | 6.64 lbf⋅ft |
First stage | 59 lbf⋅ft |
Use new screw. | |
Second stage | 90° |
First stage | 14.75 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 59 lbf⋅ft |
Use new screw. | |
Second stage | 90° |
All Audi diesel V6 3.0 L CCWA engines | 8.85 lbf⋅ft |
All Audi diesel V6 3.0 L CDUC engines | 16.96 lbf⋅ft |
All Audi diesel V6 3.0 L CKVC engines | 16.96 lbf⋅ft |
First stage | 3.69 lbf⋅ft |
Third stage | 6.64 lbf⋅ft |
Second stage | 6.64 lbf⋅ft |
Tighten cross-wise. |
Fourth stage | 14.75 lbf⋅ft |
Fifth stage | 11.8 lbf⋅ft |
First stage | 6.64 lbf⋅ft |
Second stage | 2.21 lbf⋅ft |
Replace screws. | |
Third stage | 2.21 lbf⋅ft |
Control tensioner | |
Fifth stage | 90° |
Fourth stage | 5.9 lbf⋅ft |
First stage | 2.21 lbf⋅ft |
Replace screws. |
Second stage | 2.21 lbf⋅ft |
Use new screws and tighten them crosswise. |
Third stage | 90° |
First step | 5.9 lbf⋅ft |
Second step | 90° |
Fifth stage | 11.8 lbf⋅ft |
First step | 14.75 lbf⋅ft |
Second step | 90° |
First stage | 3.69 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 5.9 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 3.69 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 3.69 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 5.9 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 3.69 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
Coolant pump | 6.64 lbf⋅ft |
All Audi diesel straight-4 2.0 L CGLC engines | 7.38 lbf⋅ft |
All Audi diesel straight-4 2.0 L CNHA engines | 8.85 lbf⋅ft |
2.0 TDI quattro with diesel straight-4 2.0 L 188 HP engine (2013.9–) | 8.85 lbf⋅ft |
2.0 TDI quattro with diesel straight-4 2.0 L 174 HP at 4200 RPM, 380 N⋅m at 1750 RPM engine (2012.1–) | 7.38 lbf⋅ft |
First stage | 14.75 lbf⋅ft |
Replace nuts. | |
Second stage | 45° |
First stage | 14.75 lbf⋅ft |
Replace nuts. | |
Second stage | 45° |
Stud screws | 11.06 lbf⋅ft |
Replace the stud bolt. |
Central screws | 16.96 lbf⋅ft |
First stage | 3.69 lbf⋅ft |
Replace bolts. | |
Second stage | 90° |
First stage | 3.69 lbf⋅ft |
Replace bolts. | |
Second stage | 5.9 lbf⋅ft |
Tighten cross-wise. | |
Third stage | 90° |
First stage | 3.69 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
All other modifications | 6.64 lbf⋅ft |
Tighten cross-wise. |
All Audi gasoline straight-4 2.0 L CAEB engines | 11.06 lbf⋅ft |
All Audi gasoline straight-4 2.0 L CDNC engines | 11.06 lbf⋅ft |
All Audi diesel straight-4 2.0 L CGLC engines | 8.11 lbf⋅ft |
First stage | 5.9 lbf⋅ft |
Replace screws. | |
Second stage | 45° |
All Audi diesel straight-4 2.0 L CNHA engines | Component must not be knocked down. |
All Audi gasoline straight-4 2.0 L CPMB engines | 16.96 lbf⋅ft |
All other modifications | 6.64 lbf⋅ft |
Plastic oil sump | Tighten screw up to the stop. |
Replace sealing rings. | |
Sheet-steel sump | 22.13 lbf⋅ft |
Replace sealing rings. |
All other modifications | 22.13 lbf⋅ft |
Use new screw. |
Oil filter cover | 18.44 lbf⋅ft |
Slightly oil sealing lips. |
Oil filter cover | 18.44 lbf⋅ft |
All Audi gasoline straight-4 2.0 L CPMB engines | 16.23 lbf⋅ft |
Oil filter cover | 18.44 lbf⋅ft |
On the engine block | 9.59 lbf⋅ft |
Cap | 25.81 lbf⋅ft |
Otherwise | 6.64 lbf⋅ft |
Oil filter cover | 25.81 lbf⋅ft |
On the engine block | 6.64 lbf⋅ft |
Oil filter cover | 18.44 lbf⋅ft |
First stage | 10.33 lbf⋅ft |
Tighten alternately starting from the top left | |
Second stage | 90° |
Cap | 18.44 lbf⋅ft |
On the engine block | 9.59 lbf⋅ft |
First stage | Screw in screws by hand. |
Use new screws and tighten them crosswise. | |
Second stage | 14.75 lbf⋅ft |
Third stage | 90° |
First stage | 14.75 lbf⋅ft |
Use new screws and tighten them crosswise. | |
Second stage | 90° |
First stage | Tighten by hand |
Use new screws and tighten them crosswise. | |
Second stage | 14.75 lbf⋅ft |
Third stage | 90° |
Oil pressure sensor | 14.75 lbf⋅ft |
First stage | 5.9 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 5.9 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 8.85 lbf⋅ft |
Replace screws. | |
Second stage | 180° |
All other modifications | 14.75 lbf⋅ft |
First stage | 22.13 lbf⋅ft |
Use new screw. | |
Second stage | 90° |
All Audi diesel V6 3.0 L CCWA engines | 44.25 lbf⋅ft |
First stage | 22.13 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 22.13 lbf⋅ft |
Replace screws. | |
Second stage | 45° |
First stage | 3.69 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 3.69 lbf⋅ft |
Tighten cross-wise. | |
Second stage | 11.8 lbf⋅ft |
First stage | 5.9 lbf⋅ft |
Replace screws. | |
Second stage | 45° |
Tighten cross-wise. |
First stage | 11.06 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
M10 | 29.5 lbf⋅ft |
M7 | 11.06 lbf⋅ft |
Gradually tighten screws crosswise. |
First stage | 2.21 lbf⋅ft |
Use new screws and tighten them crosswise. | |
Second stage | 90° |
First stage | 5.9 lbf⋅ft |
Use new screws and tighten them crosswise. | |
Second stage | 90° |
First stage | 5.9 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 5.9 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 5.9 lbf⋅ft |
Replace screws. |
Second stage | 180° |
Third stage | 45° |
Fourth stage | 180° |
Fifth stage | 90° |
First stage | 3.69 lbf⋅ft |
Second stage | 9.59 lbf⋅ft |
Third stage | 29.5 lbf⋅ft |
First stage | 5.9 lbf⋅ft |
Replace screws. | |
Second stage | 45° |
First stage | 11.06 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 11.06 lbf⋅ft |
Replace screws. | |
Second stage | 105° |
First stage | 3.69 lbf⋅ft |
Tighten the screws crosswise. | |
Second stage | 5.9 lbf⋅ft |
Replace screws. | |
Third stage | 90° |
First stage | 3.69 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
Locking screws | 18.44 lbf⋅ft |
TDC marking. |
First stage | 3.69 lbf⋅ft |
Tighten cross-wise. | |
Second stage | 11.06 lbf⋅ft |
Camshaft sensor | 6.64 lbf⋅ft |
All Audi gasoline straight-4 2.0 L CAEB engines | 3.69 lbf⋅ft |
All Audi diesel V6 3.0 L CCWA engines | 3.69 lbf⋅ft |
All Audi gasoline straight-4 2.0 L CDNC engines | 3.69 lbf⋅ft |
All Audi diesel straight-4 2.0 L CNHA engines | 5.9 lbf⋅ft |
All Audi gasoline straight-4 2.0 L CAEB engines | 3.32 lbf⋅ft |
All Audi gasoline straight-4 2.0 L CDNC engines | 3.32 lbf⋅ft |
All Audi diesel straight-4 2.0 L CGLC engines | 3.32 lbf⋅ft |
All Audi diesel straight-4 2.0 L CNHA engines | 3.32 lbf⋅ft |
All Audi gasoline straight-4 2.0 L CPMB engines | 3.32 lbf⋅ft |
All other modifications | 6.64 lbf⋅ft |
On exhaust manifold | 33.19 lbf⋅ft |
On particle filter | 44.25 lbf⋅ft |
With combustion chamber pressure sensor | 8.85 lbf⋅ft |
Without combustion chamber pressure sensor | 12.54 lbf⋅ft |
All other modifications | 12.54 lbf⋅ft |
First stage | 5.9 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
All other modifications | 14.75 lbf⋅ft |
All Audi diesel V6 3.0 L CCWA engines | 36.88 lbf⋅ft |
All Audi gasoline straight-4 2.0 L CNCD engines | 44.25 lbf⋅ft |
All Audi diesel straight-4 2.0 L CNHA engines | 38.35 lbf⋅ft |
All other modifications | 40.57 lbf⋅ft |
2.0 TDI quattro with diesel straight-4 2.0 L 188 HP engine (2013.9–) | 40.57 lbf⋅ft |
On the engine block | 29.5 lbf⋅ft |
At the subframe | 40.57 lbf⋅ft |
First stage | 66.38 lbf⋅ft |
Use new screw. | |
Second stage | 90° |
At the subframe | 40.57 lbf⋅ft |
First stage | 66.38 lbf⋅ft |
Use new screw. | |
Second stage | 90° |
At the subframe | 40.57 lbf⋅ft |
First stage | 66.38 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 84.82 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 84.82 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 84.82 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 36.88 lbf⋅ft |
Use new screws. | |
Second stage | 90° |
First stage | 66.38 lbf⋅ft |
Use new screws. | |
Second stage | 135° |
First stage | 66.38 lbf⋅ft |
Use new screws. | |
Second stage | 90° |
First stage | 36.88 lbf⋅ft |
Use new screws. | |
Second stage | 90° |
First stage | 66.38 lbf⋅ft |
Use new screws. | |
Second stage | 135° |
First stage | 66.38 lbf⋅ft |
Use new screws. | |
Second stage | 90° |
First stage | 66.38 lbf⋅ft |
Use new screw. | |
Second stage | 90° |
First stage | 66.38 lbf⋅ft |
Use new screw. | |
Second stage | 90° |
With electric servo-steering | 66.38 lbf⋅ft |
Use new screw. | |
With hydraulic servo-steering | 66.38 lbf⋅ft |
Use new screw. |
With electric servo-steering | 90° |
With hydraulic servo-steering | 135° |
Cross support | 29.5 lbf⋅ft |
On the engine block | 18.44 lbf⋅ft |
At the subframe | 40.57 lbf⋅ft |
On engine | 29.5 lbf⋅ft |
All Audi gasoline V6 3.2 L CALA engines | 16.96 lbf⋅ft |
Replace nut. | |
All Audi diesel V6 3.0 L CCWA engines | 16.96 lbf⋅ft |
Replace the nuts and use fitting paste | |
All Audi gasoline V6 3.0 L CMUA engines | 16.96 lbf⋅ft |
All other modifications | 29.5 lbf⋅ft |
Replace the nuts and use fitting paste |
Catalytic converter bracket | 16.96 lbf⋅ft |
All Audi diesel V6 3.0 L CCWA engines | 16.96 lbf⋅ft |
All Audi diesel V6 3.0 L CDUC engines | 16.96 lbf⋅ft |
Replace nuts. Use hot screw paste. | |
All Audi diesel V6 3.0 L CKVC engines | 16.96 lbf⋅ft |
Replace nuts. Use hot screw paste. |
First stage | 1.48 lbf⋅ft |
Second stage | 5.16 lbf⋅ft |
2.0 TDI quattro with diesel straight-4 2.0 L 188 HP engine (2013.9–) | 33.19 lbf⋅ft |
First stage | 11.06 lbf⋅ft |
Replace nuts. | |
Second stage | 18.44 lbf⋅ft |
Bottom | 22.13 lbf⋅ft |
Replace the nuts and use fitting paste |
First stage | 3.69 lbf⋅ft |
Replace nuts. | |
Second stage | 8.85 lbf⋅ft |
Third stage | 11.8 lbf⋅ft |
Fourth stage | 18.44 lbf⋅ft |
At the cylinder head | 18.44 lbf⋅ft |
Replace nuts. Use hot screw paste. |
First stage | 22.13 lbf⋅ft |
Replace screws. Use hot screw paste. | |
Second stage | 90° |
First stage | 8.11 lbf⋅ft |
Tighten screws from the inside outwards. | |
Second stage | 16.23 lbf⋅ft |
Third stage | 16.23 lbf⋅ft |
Control tensioner |
Bottom | 22.13 lbf⋅ft |
Replace nuts. Use hot screw paste. |
First stage | 3.69 lbf⋅ft |
Replace nuts. Use hot screw paste. | |
Second stage | 8.85 lbf⋅ft |
Third stage | 11.8 lbf⋅ft |
Fourth stage | 18.44 lbf⋅ft |
All other modifications | 18.44 lbf⋅ft |
Replace the nuts and use fitting paste |
All Audi gasoline straight-4 2.0 L CNCD engines | 6.64 lbf⋅ft |
All Audi diesel straight-4 2.0 L CNHA engines | 7.38 lbf⋅ft |
First stage | 22.13 lbf⋅ft |
Replace screws and nuts. | |
Second stage | 90° |
Clamps | 18.44 lbf⋅ft |
Replace nuts. |
All Audi gasoline straight-4 2.0 L CPMB engines | 18.44 lbf⋅ft |
Replace nuts. | |
All other modifications | 16.96 lbf⋅ft |
Replace nuts. |
Exhaust pipe bracket | 16.96 lbf⋅ft |
Clamps | 16.96 lbf⋅ft |
All Audi diesel straight-4 2.0 L CNHA engines | 16.96 lbf⋅ft |
All Audi gasoline straight-4 2.0 L CPMB engines | 18.44 lbf⋅ft |
First stage | 1.48 lbf⋅ft |
Second stage | 90° |
slacken | |
Third stage | 14.75 lbf⋅ft |
2.0 TDI quattro with diesel straight-4 2.0 L 188 HP engine (2013.9–) | 16.96 lbf⋅ft |
Replace nuts. |
Fuel filter bracket | 5.9 lbf⋅ft |
Preliminary feed pump | 5.9 lbf⋅ft |
Spark plugs | 22.13 lbf⋅ft |
M10 | 47.94 lbf⋅ft |
First stage | 22.13 lbf⋅ft |
Second stage | 90° |
M10 × 50 screws | 47.94 lbf⋅ft |
First stage | 22.13 lbf⋅ft |
Second stage | 90° |
M10 | 47.94 lbf⋅ft |
First stage | 22.13 lbf⋅ft |
Second stage | 90° |
M10 × 50 screws | 47.94 lbf⋅ft |
M10 | 47.94 lbf⋅ft |
First stage | 22.13 lbf⋅ft |
Second stage | 90° |
M10 | 47.94 lbf⋅ft |
Property class 10.9 |
First stage | 22.13 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2016 Audi A5 Cabriolet Quattro user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.
Before doing any DIY service please check your insurance policy and Audi warranty policy for your region. In some regions DIY service may invalidate your warranty.
Table of Contents
- Air Conditioning Compressor Oil Capacity
- Air Conditioning Refrigerant Capacity
- Automatic Transmission Fluid Capacity
- Axle Oil Capacity
- Brake Fluid Capacity
- Cooling Fluid Capacity
- Engine Oil Capacity
- Fluid and Lubricant Specifications
- Gearbox Oil Capacity
- Manual Transmission Oil Capacity
- Brake System Specifications
- Chassis Specifications
- Cooling System Specifications
- Drive Belts Specifications
- Electrical System Specifications
- Emission
- Engine Fastener Tightening Specifications
- Front Suspension Fastener Tightening Specifications
- Rear Suspension Fastener Tightening Specifications
- Transmission Fastener Tightening Specifications
Conquer your fears and never give up!
DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Audi A5 Cabriolet Quattro service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.
Doing basic service for your 2016 Audi A5 Cabriolet Quattro you're not only saving money, but also also improving your technical skills and learning something new.