in your garage to make future searches easy.
Condition | Value |
---|
All Audi gasoline straight-4 2.0 L ALT engines | 7.38 lbf⋅ft |
All Audi gasoline straight-4 1.6 L ALZ engines | 14.75 lbf⋅ft |
All Audi diesel straight-4 1.9 L AVF engines | 18.44 lbf⋅ft |
All Audi gasoline straight-4 1.8 L AVJ engines | 7.38 lbf⋅ft |
All Audi diesel straight-4 1.9 L AWX engines | 18.44 lbf⋅ft |
All other modifications | 7.38 lbf⋅ft |
Gradually tighten screws crosswise. |
First stage | 14.75 lbf⋅ft |
Use new screw. | |
Second stage | 90° |
All other modifications | 18.44 lbf⋅ft |
All Audi gasoline straight-4 2.0 L ALT engines | 18.44 lbf⋅ft |
M10 | 29.5 lbf⋅ft |
M8 | 16.96 lbf⋅ft |
All other modifications | 16.96 lbf⋅ft |
All Audi diesel straight-4 1.9 L AVF engines | 18.44 lbf⋅ft |
Use new screw. | |
All Audi diesel straight-4 1.9 L AWX engines | 18.44 lbf⋅ft |
Use new screw. | |
All other modifications | 16.23 lbf⋅ft |
Air-conditioning compressor | 18.44 lbf⋅ft |
use only property class 10.9 |
All Audi gasoline straight-4 2.0 L ALT engines | 29.5 lbf⋅ft |
All Audi gasoline V6 3.0 L ASN engines | 16.96 lbf⋅ft |
All Audi diesel straight-4 1.9 L AVF engines | 33.19 lbf⋅ft |
All Audi gasoline V6 3.0 L AVK engines | 16.96 lbf⋅ft |
All Audi diesel straight-4 1.9 L AWX engines | 33.19 lbf⋅ft |
All other modifications | 29.5 lbf⋅ft |
Use screw-locking compound. |
M6 | 7.38 lbf⋅ft |
M8 | 18.44 lbf⋅ft |
All Audi gasoline straight-4 2.0 L ALT engines | 16.96 lbf⋅ft |
All Audi gasoline straight-4 1.6 L ALZ engines | 16.96 lbf⋅ft |
All Audi diesel straight-4 1.9 L AVF engines | 18.44 lbf⋅ft |
All Audi gasoline straight-4 1.8 L AVJ engines | 14.75 lbf⋅ft |
All Audi diesel straight-4 1.9 L AWX engines | 18.44 lbf⋅ft |
M10 | 33.19 lbf⋅ft |
M8 | 16.23 lbf⋅ft |
Power steering pump bracket | 16.23 lbf⋅ft |
Servo pump pulley | 16.96 lbf⋅ft |
All Audi gasoline straight-4 2.0 L ALT engines | 18.44 lbf⋅ft |
All Audi gasoline straight-4 1.8 L AVJ engines | 14.75 lbf⋅ft |
All other modifications | 16.96 lbf⋅ft |
All other modifications | 18.44 lbf⋅ft |
M6 | 7.38 lbf⋅ft |
M8 | 14.75 lbf⋅ft |
Injection hoses | 22.13 lbf⋅ft |
First stage | 8.85 lbf⋅ft |
Replace screws. | |
Second stage | 270° |
M6 | 7.38 lbf⋅ft |
M8 | 14.75 lbf⋅ft |
Injection pump pulley | 16.23 lbf⋅ft |
Do not loosen the middle nut. |
On exhaust manifold | 25.81 lbf⋅ft |
Replace screws. Use hot screw paste. |
All other modifications | 18.44 lbf⋅ft |
Replace nuts. |
At the turbocharger | 14.75 lbf⋅ft |
On the engine block | 29.5 lbf⋅ft |
At the turbocharger | 14.75 lbf⋅ft |
On engine mounting | 18.44 lbf⋅ft |
At the turbocharger | 22.13 lbf⋅ft |
On the engine block | 18.44 lbf⋅ft |
Banjo screws | 25.81 lbf⋅ft |
Replace sealing rings. |
Union nuts | 22.13 lbf⋅ft |
Banjo screws | 22.13 lbf⋅ft |
Union nuts | 16.96 lbf⋅ft |
Support | 7.38 lbf⋅ft |
Union nuts | 16.23 lbf⋅ft |
At the turbocharger | 11.06 lbf⋅ft |
Replace sealing rings. |
Union nuts | 29.5 lbf⋅ft |
All other modifications | 7.38 lbf⋅ft |
Replace sealing rings. |
All Audi gasoline V6 3.0 L ASN engines | 7.38 lbf⋅ft |
All Audi gasoline V6 3.0 L AVK engines | 7.38 lbf⋅ft |
All other modifications | 11.06 lbf⋅ft |
All Audi diesel straight-4 1.9 L AVF engines | 7.38 lbf⋅ft |
Replace screws. | |
All Audi diesel straight-4 1.9 L AWX engines | 7.38 lbf⋅ft |
Replace screws. |
With twin fan | 3.69 lbf⋅ft |
Otherwise | 2.21 lbf⋅ft |
M10 | 33.19 lbf⋅ft |
Ribbed screw head. | 20.65 lbf⋅ft |
All Audi gasoline straight-4 2.0 L ALT engines | 5.9 lbf⋅ft |
cross-wise from inside to outside | |
All Audi gasoline straight-4 1.6 L ALZ engines | 16.96 lbf⋅ft |
First tighten bearing covers 2 and 4 alternately and in steps | |
All Audi gasoline V6 3.0 L ASN engines | 7.38 lbf⋅ft |
Tighten in steps from inside to outside. |
First stage | 5.9 lbf⋅ft |
Use new screws. | |
Second stage | 90° |
First tighten bearing covers 2 and 4 alternately and in steps |
All Audi gasoline V6 3.0 L AVK engines | 7.38 lbf⋅ft |
Tighten in steps from inside to outside. | |
All other modifications | 7.38 lbf⋅ft |
First tighten bearing covers 2 and 4 alternately and in steps |
Third stage | 90° |
First stage | 29.5 lbf⋅ft |
Use new screws. | |
Second stage | 44.25 lbf⋅ft |
Fourth stage | 90° |
First stage | 29.5 lbf⋅ft |
Use new screws. | |
Second stage | 90° |
All Audi gasoline straight-4 2.0 L ALT engines | 5 in |
All Audi gasoline V6 3.0 L ASN engines | 5 in |
All Audi diesel straight-4 1.9 L AVF engines | 6.54 in |
All Audi gasoline V6 3.0 L AVK engines | 5 in |
All Audi diesel straight-4 1.9 L AWX engines | 6.54 in |
All other modifications | 4.53 in |
First stage | 14.75 lbf⋅ft |
Use new screws. | |
Second stage | 90° |
Valve cover | 7.38 lbf⋅ft |
Gradually tighten screws crosswise. |
First stage | 22.13 lbf⋅ft |
Use new screws. | |
Second stage | 90° |
First stage | 147.51 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
Third stage | 90° |
First stage | 88.51 lbf⋅ft |
Use new screw. | |
Second stage | 90° |
First stage | 66.38 lbf⋅ft |
Use new screw. | |
Second stage | 90° |
All Audi gasoline straight-4 1.6 L ALZ engines | 16.96 lbf⋅ft |
All Audi gasoline V6 3.0 L ASN engines | 16.96 lbf⋅ft |
All Audi gasoline V6 3.0 L AVK engines | 16.96 lbf⋅ft |
First stage | 7.38 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
All Audi gasoline V6 3.0 L ASN engines | 18.44 lbf⋅ft |
All Audi gasoline V6 3.0 L AVK engines | 18.44 lbf⋅ft |
All other modifications | 25.81 lbf⋅ft |
First stage | 44.25 lbf⋅ft |
Replace screws. | |
Second stage | 180° |
First stage | 44.25 lbf⋅ft |
Replace screws. | |
Second stage | 180° |
First stage | 44.25 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 44.25 lbf⋅ft |
Replace screws. | |
Second stage | 180° |
First stage | 25.81 lbf⋅ft |
Use new screws. | |
Second stage | 90° |
Tighten the screws cross-wise from inside to outside. |
Third stage | 14.75 lbf⋅ft |
Fourth stage | 90° |
First stage | 47.94 lbf⋅ft |
Use new screws. | |
Second stage | 90° |
First stage | 7.38 lbf⋅ft |
Replace screws. Use screw-locking compound. | |
Second stage | 90° |
All Audi gasoline V6 3.0 L ASN engines | 16.96 lbf⋅ft |
All Audi gasoline V6 3.0 L AVK engines | 16.96 lbf⋅ft |
First stage | 7.38 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
All other modifications | 7.38 lbf⋅ft |
All Audi gasoline straight-4 2.0 L ALT engines | 18.44 lbf⋅ft |
With friction-damped tension pulley | 16.23 lbf⋅ft |
With hydraulic tensioning device | 14.75 lbf⋅ft |
All Audi gasoline straight-4 1.8 L AVJ engines | 18.44 lbf⋅ft |
All other modifications | 33.19 lbf⋅ft |
All Audi gasoline straight-4 1.6 L ALZ engines | 73.76 lbf⋅ft |
Left | 73.76 lbf⋅ft |
Right | 73.76 lbf⋅ft |
Central screws | 73.76 lbf⋅ft |
Wheel | 18.44 lbf⋅ft |
All other modifications | 47.94 lbf⋅ft |
All Audi gasoline V6 3.0 L ASN engines | 7.38 lbf⋅ft |
All Audi gasoline V6 3.0 L AVK engines | 7.38 lbf⋅ft |
All other modifications | 11.06 lbf⋅ft |
Injection pump drive belt tensioning roller | 26.55 lbf⋅ft |
Inlet camshaft wheel | 73.76 lbf⋅ft |
Oil pump drive chain tensioner | 11.06 lbf⋅ft |
Outlet camshaft wheel | 73.76 lbf⋅ft |
M6 | 7.38 lbf⋅ft |
Use screw-locking compound. | |
M8 | 16.96 lbf⋅ft |
Use screw-locking compound. |
All other modifications | 18.44 lbf⋅ft |
Toothed belt guard, rear |
Toothed belt guard at the bottom | 7.38 lbf⋅ft |
Use screw-locking compound. |
All Audi gasoline V6 3.0 L ASN engines | 4.43 lbf⋅ft |
Replace screws. | |
All Audi gasoline V6 3.0 L AVK engines | 4.43 lbf⋅ft |
Replace screws. | |
All other modifications | 7.38 lbf⋅ft |
Use screw-locking compound. |
Toothed belt guard center | 7.38 lbf⋅ft |
Use screw-locking compound. |
All Audi gasoline straight-4 1.6 L ALZ engines | 16.96 lbf⋅ft |
With tensioning roller eccentric | 33.19 lbf⋅ft |
First stage | 22.13 lbf⋅ft |
Use new screw. | |
Second stage | 90° |
First stage | 14.75 lbf⋅ft |
Second stage | 45° |
All other modifications | 19.91 lbf⋅ft |
All Audi gasoline straight-4 2.0 L ALT engines | 11.06 lbf⋅ft |
Replace screws. | |
All Audi gasoline V6 3.0 L ASN engines | 22.13 lbf⋅ft |
All Audi gasoline V6 3.0 L AVK engines | 22.13 lbf⋅ft |
All other modifications | 18.44 lbf⋅ft |
All other modifications | 22.13 lbf⋅ft |
First stage | 10.33 lbf⋅ft |
Use new screws. | |
Second stage | 90° |
Tighten cross-wise. | |
Cap | 18.44 lbf⋅ft |
M6 | 11.06 lbf⋅ft |
use only property class 10.9 | |
Screws | 18.44 lbf⋅ft |
Union nuts | 16.23 lbf⋅ft |
Screws | 22.13 lbf⋅ft |
Union nuts | 16.96 lbf⋅ft |
First stage | 14.75 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
All other modifications | 16.23 lbf⋅ft |
M10 | 11.06 lbf⋅ft |
M7 | 12.54 lbf⋅ft |
Gradually tighten screws crosswise. |
Oil sump top part | 33.19 lbf⋅ft |
Oil sump lower part | 7.38 lbf⋅ft |
Gradually tighten screws crosswise. |
Oil sump top part | 11.8 lbf⋅ft |
Oil sump top part | 16.23 lbf⋅ft |
M10 | 29.5 lbf⋅ft |
M7 | 11.06 lbf⋅ft |
M10 | 29.5 lbf⋅ft |
M7 | 11.06 lbf⋅ft |
Gradually tighten screws crosswise. |
Charge air pressure sensor | 3.69 lbf⋅ft |
Crankshaft sensor | 7.38 lbf⋅ft |
Ceramic glow plug | 8.85 lbf⋅ft |
Metal glow plug | 11.06 lbf⋅ft |
Knock sensor | 14.75 lbf⋅ft |
Lambda sensor | 40.57 lbf⋅ft |
Engine bracket | 33.19 lbf⋅ft |
on the engine block |
Nuts | 18.44 lbf⋅ft |
Otherwise | 16.96 lbf⋅ft |
M10 × 70 screws | 55.32 lbf⋅ft |
Replace screws. |
First stage | 81.13 lbf⋅ft |
Use new screw. | |
Second stage | 90° |
M10 | 29.5 lbf⋅ft |
M8 | 14.75 lbf⋅ft |
All Audi diesel straight-4 1.9 L AVF engines | 20.65 lbf⋅ft |
All Audi diesel straight-4 1.9 L AWX engines | 20.65 lbf⋅ft |
M10 | 29.5 lbf⋅ft |
M8 | 18.44 lbf⋅ft |
At the turbocharger | 22.13 lbf⋅ft |
Replace seals and nuts. |
All other modifications | 18.44 lbf⋅ft |
Replace seals and nuts. |
All Audi gasoline straight-4 1.8 L AVJ engines | 22.13 lbf⋅ft |
Replace nuts. | |
All other modifications | 18.44 lbf⋅ft |
Replace the nuts and use fitting paste |
Exhaust pipe | 18.44 lbf⋅ft |
Replace nuts. | |
Exhaust pipe bracket | 18.44 lbf⋅ft |
Primary catalytic converter | 19.91 lbf⋅ft |
Replace seals and nuts. |
M7 | 11.06 lbf⋅ft |
M8 | 14.75 lbf⋅ft |
All other modifications | 10.62 lbf⋅in |
Spark plugs | 22.13 lbf⋅ft |
All Audi gasoline V6 3.0 L ASN engines | 33.19 lbf⋅ft |
All Audi gasoline V6 3.0 L AVK engines | 33.19 lbf⋅ft |
M10 | 33.19 lbf⋅ft |
M12 | 47.94 lbf⋅ft |
Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2000 Audi A4 user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.
Before doing any DIY service please check your insurance policy and Audi warranty policy for your region. In some regions DIY service may invalidate your warranty.
Table of Contents
- Air Conditioning Compressor Oil Capacity
- Air Conditioning Refrigerant Capacity
- Automatic Transmission Fluid Capacity
- Axle Oil Capacity
- Brake Fluid Capacity
- Cooling Fluid Capacity
- Engine Oil Capacity
- Fluid and Lubricant Specifications
- Manual Transmission Oil Capacity
- Steering Fluid Capacity
- Brake System Specifications
- Chassis Specifications
- Cooling System Specifications
- Drive Belts Specifications
- Electrical System Specifications
- Emission
- Engine Fastener Tightening Specifications
- Front Suspension Fastener Tightening Specifications
- Rear Suspension Fastener Tightening Specifications
- Transmission Fastener Tightening Specifications
Conquer your fears and never give up!
DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Audi A4 service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.
Doing basic service for your 2000 Audi A4 you're not only saving money, but also also improving your technical skills and learning something new.
2000 Audi A4 generations
In 2000 Audi offered 2 generations of the A4. Engine fastener tightening specifications may vary in different generations. Be sure that you are looking at the rigt modification.