2011 Audi A4 S4 B8 facelift Transmission Fastener Tightening Specifications
in your garage to make future searches easy.
Condition | Value |
---|
0BF axle drive | 11.06 lbf⋅ft |
0BF axle drive | 11.06 lbf⋅ft |
Drive shaft heat protection plate | 16.96 lbf⋅ft |
First stage | 147.51 lbf⋅ft |
Replace screws. | |
Second stage | 180° |
M10 | 51.63 lbf⋅ft |
Replace screws. |
First stage | 14.75 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
Propeller shaft heat protection plate | 17.7 lbf⋅ft |
Propeller shaft intermediate bearing | 14.75 lbf⋅ft |
First stage | 22.13 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
M10 | 51.63 lbf⋅ft |
Replace screws. |
First stage | 14.75 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 147.51 lbf⋅ft |
Replace screws. | |
Second stage | 180° |
First stage | Fingertight fastening of first screw required. |
Second stage | Turn clutch module by 180°. |
Third stage | 44.25 lbf⋅ft |
Tighten screws one after the other using prescribed torque. |
First stage | 16.23 lbf⋅ft |
Use new screws. | |
Second stage | 90° |
Clutch slave cylinder | 14.75 lbf⋅ft |
Clutch slave cylinder bleeder valve | 4.06 lbf⋅ft |
Differential oil control screws | 25.81 lbf⋅ft |
Replace screws. |
0BF axle drive | 11.06 lbf⋅ft |
Rear axle automatic locking differential oil control screws | 11.06 lbf⋅ft |
Replace screws. | |
Rear axle automatic locking differential oil drain plug | 11.06 lbf⋅ft |
Replace screws. |
0BC axle drive | 70.07 lbf⋅ft |
0BD axle drive | 70.07 lbf⋅ft |
0BC axle drive | 40.57 lbf⋅ft |
0BD axle drive | 40.57 lbf⋅ft |
0BC axle drive | 22.13 lbf⋅ft |
0BF axle drive | 11.06 lbf⋅ft |
Gear rod | 14.75 lbf⋅ft |
Replace nuts. | |
Thrust rod | 14.75 lbf⋅ft |
First stage | 11.06 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
M10 × 50 screws | 47.94 lbf⋅ft |
First stage | 22.13 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
0B6 gearbox | 25.81 lbf⋅ft |
Use new seal and screws. |
Oil circuit for twin clutch | 33.19 lbf⋅ft |
Replace sealing rings. | |
Otherwise | 33.19 lbf⋅ft |
With 6-speed gearbox | 29.5 lbf⋅ft |
Oil circuit for twin clutch | 33.19 lbf⋅ft |
Oil control screw. | |
Otherwise | 33.19 lbf⋅ft |
Oil control screw. |
With 6-speed gearbox | 29.5 lbf⋅ft |
Oil control screw. |
With automated shift 7-speed gearbox | 5.9 lbf⋅ft |
Replace sealing rings. |
Screws | 14.75 lbf⋅ft |
Nuts | 14.75 lbf⋅ft |
At the crossmember | 14.75 lbf⋅ft |
On chassis | 51.63 lbf⋅ft |
First stage | 14.75 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
At the gearbox | 29.5 lbf⋅ft |
Otherwise | 51.63 lbf⋅ft |
Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2011 Audi A4 S4 user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.
Before doing any DIY service please check your insurance policy and Audi warranty policy for your region. In some regions DIY service may invalidate your warranty.
Table of Contents
- Air Conditioning Compressor Oil Capacity
- Air Conditioning Refrigerant Capacity
- Automatic Transmission Fluid Capacity
- Axle Oil Capacity
- Brake Fluid Capacity
- Engine Oil Capacity
- Fluid and Lubricant Specifications
- Gearbox Oil Capacity
- Manual Transmission Oil Capacity
- Engine Fastener Tightening Specifications
- Front Suspension Fastener Tightening Specifications
- Rear Suspension Fastener Tightening Specifications
- Transmission Fastener Tightening Specifications
Conquer your fears and never give up!
DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Audi A4 S4 service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.
Doing basic service for your 2011 Audi A4 S4 you're not only saving money, but also also improving your technical skills and learning something new.
2011 Audi A4 S4 generations
In 2011 Audi offered 2 generations of the A4 S4. Transmission fastener tightening specifications may vary in different generations. Be sure that you are looking at the rigt modification.