in your garage to make future searches easy.

Condition Value
expand_moreFront axle brake
expand_moreBleed valve
FNR-G60 brake calipers 11.06 lbf⋅ft
expand_moreBrake hose
At the brake caliper 33.19 lbf⋅ft
Banjo bolts.
Brake line 11.06 lbf⋅ft
Front axle brake caliper 22.13 lbf⋅ft
Front axle brake caliper mounting support 140.14 lbf⋅ft
Clean the ribbing
Front axle brake disc 3.69 lbf⋅ft
Wheel speed sensor 7.38 lbf⋅ft
expand_moreFront axle steering
Lower steering column joint 22.13 lbf⋅ft
Pressure line at steering gear 25.81 lbf⋅ft
Replace sealing rings.
Return line to steering gear 34.67 lbf⋅ft
Replace sealing rings.
expand_moreSteering gear
expand_moreAt the subframe
First stage 29.5 lbf⋅ft
Use new screws.
Second stage 90°
expand_moreTrack rod end on stub axle
Adjusting screws 5.16 lbf⋅ft
Clamping screws 33.19 lbf⋅ft
Replace nuts.
Track rod end on track rod 29.5 lbf⋅ft
Track rod on steering gear 73.76 lbf⋅ft
expand_moreFront axle suspension
expand_moreSuspension strut bearing pedestal
On chassis 55.32 lbf⋅ft
Shock-absorber piston rod 36.88 lbf⋅ft
Replace nuts.
expand_moreSuspension strut
At the bearing pedestal 36.88 lbf⋅ft
Replace nuts.
At the transverse control arm 66.38 lbf⋅ft
Replace nuts.
expand_moreWheel suspension
expand_moreFront axle drive shaft
expand_moreAt the gearbox
M10 51.63 lbf⋅ft
M8 29.5 lbf⋅ft
expand_moreM14
expand_moreCentral screws
First stage 84.82 lbf⋅ft
Use new screw.
Second stage 180°
expand_moreM16
expand_moreCentral screws
First stage 147.51 lbf⋅ft
Use new screw.
Second stage 180°
expand_moreStabiliser mounting at the axle control arm
First stage 29.5 lbf⋅ft
Use new screw.
Second stage 90°
expand_moreStabiliser mounting at the stabiliser
First stage 29.5 lbf⋅ft
Use new screw.
Second stage 90°
expand_moreLower front transverse control arm
expand_moreAt the subframe
First stage 51.63 lbf⋅ft
Replace screws and nuts.
Second stage 180°
On stub axle 81.13 lbf⋅ft
Replace nuts.
expand_moreLower rear transverse control arm
expand_moreAt the subframe
First stage 51.63 lbf⋅ft
Replace screws and nuts.
Second stage 180°
On stub axle 81.13 lbf⋅ft
Replace nuts.
expand_moreUpper front transverse control arm
expand_moreAt the bearing pedestal
First stage 36.88 lbf⋅ft
Use new screws and nuts.
Second stage 90°
On stub axle 29.5 lbf⋅ft
Replace nuts.
expand_moreUpper rear transverse control arm
expand_moreAt the bearing pedestal
First stage 36.88 lbf⋅ft
Replace screws and nuts.
Second stage 90°
On stub axle 29.5 lbf⋅ft
Replace nuts.
expand_moreWheel hub wheel bearing
expand_moreM14
expand_moreCentral screws
First stage 84.82 lbf⋅ft
Use new screw.
Second stage 180°
expand_moreM16
expand_moreCentral screws
First stage 147.51 lbf⋅ft
Use new screw.
Second stage 180°
expand_moreWheel bearing unit
First stage 59 lbf⋅ft
Use new screws.
Second stage 90°
expand_moreWheels and tires
expand_moreTire pressure sensors
Torx screws 2.95 lbf⋅ft
Replace the screw.
Union nuts 2.95 lbf⋅ft
Wheel attachment 88.51 lbf⋅ft

Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2008 Audi A4 S4 Avant user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.

Before doing any DIY service please check your insurance policy and Audi warranty policy for your region. In some regions DIY service may invalidate your warranty.

Conquer your fears and never give up!

DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Audi A4 S4 Avant service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.

Doing basic service for your 2008 Audi A4 S4 Avant you're not only saving money, but also also improving your technical skills and learning something new.

2008 Audi A4 S4 Avant generations

In 2008 Audi offered 2 generations of the A4 S4 Avant. Front suspension fastener tightening specifications may vary in different generations. Be sure that you are looking at the rigt modification.

Audi A4 S4 Avant B7 model years

Units:
facebook twitter reddit linkedin messenger whatsapp telegram skype email chat