in your garage to make future searches easy.

Condition Value
expand_moreAxle drive
Drive shaft heat protection plate 16.96 lbf⋅ft
expand_moreFront axle drive shaft
expand_moreAt the gearbox
M10 51.63 lbf⋅ft
Tighten the new screws evenly in several steps.
M8 29.5 lbf⋅ft
Tighten the new screws evenly in several steps.
expand_moreM14
expand_moreCentral screws
First stage 84.82 lbf⋅ft
Use new screw.
Second stage 180°
expand_moreM16
expand_moreCentral screws
First stage 147.51 lbf⋅ft
Use new screw.
Second stage 180°
Propeller shaft heat protection plate 18.44 lbf⋅ft
Propeller shaft intermediate bearing 18.44 lbf⋅ft
Propeller shaft 40.57 lbf⋅ft
expand_moreRear axle drive shaft
expand_moreAt the gearbox
M10 51.63 lbf⋅ft
Tighten the new screws evenly in several steps.
M8 29.5 lbf⋅ft
Tighten the new screws evenly in several steps.
expand_moreM14
expand_moreCentral screws
First stage 84.82 lbf⋅ft
Use new screw.
Second stage 180°
expand_moreM16
expand_moreCentral screws
First stage 147.51 lbf⋅ft
Use new screw.
Second stage 180°
expand_moreClutch
Clutch master cylinder 14.75 lbf⋅ft
Clutch pressure plate 16.23 lbf⋅ft
Gradually tighten screws crosswise.
Clutch slave cylinder 16.96 lbf⋅ft
Use new screw.
Release bearing guide sleeve 17.7 lbf⋅ft
Use screw-locking compound.
expand_moreGear shifting
Gear rod 16.96 lbf⋅ft
expand_moreThrust rod
At the gearbox 29.5 lbf⋅ft
On chassis 18.44 lbf⋅ft
expand_moreGearbox
expand_moreGearbox flange connection at engine
M10 33.19 lbf⋅ft
M12 47.94 lbf⋅ft
Torque converter 62.69 lbf⋅ft
Replace screws.
expand_moreGearbox lubrication
expand_moreDistributor gearbox oil control screws
09L gearbox 25.81 lbf⋅ft
Replace sealing rings and screws.
expand_moreGearbox oil drain plug
expand_moreWith automatic gearbox
09L gearbox 8.85 lbf⋅ft
Use new seal and screws.
expand_moreGearbox oil filler plug
expand_moreWith automatic gearbox
09L gearbox 59 lbf⋅ft
Replace sealing rings.
Otherwise 29.5 lbf⋅ft
expand_moreOil control plug
With automatic gearbox 59 lbf⋅ft
With manual transmission 29.5 lbf⋅ft
expand_moreGearbox mounting
expand_moreGearbox cross support
expand_moreM10
Screws 40.57 lbf⋅ft
Replace screws.
expand_moreScrews (M12)
First stage 81.13 lbf⋅ft
Replace screws.
Second stage 90°
Nuts 16.96 lbf⋅ft
Replace nuts.
Gearbox mounting 16.96 lbf⋅ft

Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2004 Audi A4 S4 Avant user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.

Before doing any DIY service please check your insurance policy and Audi warranty policy for your region. In some regions DIY service may invalidate your warranty.

Conquer your fears and never give up!

DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Audi A4 S4 Avant service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.

Doing basic service for your 2004 Audi A4 S4 Avant you're not only saving money, but also also improving your technical skills and learning something new.

2004 Audi A4 S4 Avant generations

In 2004 Audi offered 2 generations of the A4 S4 Avant. Transmission fastener tightening specifications may vary in different generations. Be sure that you are looking at the rigt modification.

Audi A4 S4 Avant B6 model years

Units:
facebook twitter reddit linkedin messenger whatsapp telegram skype email chat