1995 Audi A4 Quattro B5 Engine Fastener Tightening Specifications
in your garage to make future searches easy.
Condition | Value |
---|
All Audi gasoline V6 2.8 L AAH engines | 14.75 lbf⋅ft |
All Audi gasoline V6 2.6 L ABC engines | 14.75 lbf⋅ft |
All other modifications | 7.38 lbf⋅ft |
Gradually tighten screws crosswise. |
Auxiliary drive belt deflection pulley | 16.23 lbf⋅ft |
All Audi gasoline straight-4 1.8 L ADR engines | 18.44 lbf⋅ft |
All Audi gasoline straight-4 1.8 L AEB engines | 18.44 lbf⋅ft |
All Audi gasoline straight-4 1.8 L AFY engines | 18.44 lbf⋅ft |
All Audi gasoline straight-4 1.8 L ANB engines | 18.44 lbf⋅ft |
All Audi gasoline straight-4 1.8 L APT engines | 18.44 lbf⋅ft |
All Audi gasoline straight-4 1.8 L APU engines | 18.44 lbf⋅ft |
All Audi gasoline straight-4 1.8 L ARG engines | 18.44 lbf⋅ft |
All Audi gasoline straight-4 1.8 L ARK engines | 18.44 lbf⋅ft |
All Audi gasoline straight-4 1.8 L AWT engines | 18.44 lbf⋅ft |
All other modifications | 40.57 lbf⋅ft |
Auxiliary drive belt tensioner | 18.44 lbf⋅ft |
Use new screw. | |
Air-conditioning compressor | 18.44 lbf⋅ft |
Property class 10.9 |
Class 10.9 | 22.13 lbf⋅ft |
Class 8.8 screws | 18.44 lbf⋅ft |
All other modifications | 18.44 lbf⋅ft |
Air-conditioning compressor pressure line | 18.44 lbf⋅ft |
All Audi gasoline V6 2.8 L AAH engines | 14.75 lbf⋅ft |
All Audi gasoline V6 2.6 L ABC engines | 14.75 lbf⋅ft |
M10 | 29.5 lbf⋅ft |
M8 | 18.44 lbf⋅ft |
M10 | 33.19 lbf⋅ft |
M8 | 16.23 lbf⋅ft |
Power steering pump bracket | 18.44 lbf⋅ft |
Servo pump pulley | 18.44 lbf⋅ft |
Servo steering pump | 18.44 lbf⋅ft |
All other modifications | 14.75 lbf⋅ft |
Cap | 7.38 lbf⋅ft |
Otherwise | 14.75 lbf⋅ft |
Exhaust gas return cooler | 7.38 lbf⋅ft |
Exhaust gas return valve | 18.44 lbf⋅ft |
Replace sealing rings. | |
Exhaust recirculation pipe | 18.44 lbf⋅ft |
Replace sealing rings. |
All other modifications | 14.75 lbf⋅ft |
Charge air pipes | 7.38 lbf⋅ft |
On exhaust manifold | 25.81 lbf⋅ft |
Replace screws. Use hot screw paste. |
At the turbocharger | 29.5 lbf⋅ft |
On the engine block | 33.19 lbf⋅ft |
At the turbocharger | 22.13 lbf⋅ft |
On the engine block | 18.44 lbf⋅ft |
Banjo screws | 25.81 lbf⋅ft |
Union nuts | 22.13 lbf⋅ft |
Union nuts | 18.44 lbf⋅ft |
Banjo screws | 22.13 lbf⋅ft |
Union nuts | 16.96 lbf⋅ft |
All other modifications | 7.38 lbf⋅ft |
Replace sealing rings. |
All Audi gasoline straight-4 1.8 L ADR engines | 18.44 lbf⋅ft |
All Audi gasoline straight-4 1.8 L AEB engines | 18.44 lbf⋅ft |
All Audi gasoline straight-4 1.8 L AFY engines | 18.44 lbf⋅ft |
All Audi gasoline straight-4 1.8 L ANB engines | 18.44 lbf⋅ft |
All Audi gasoline straight-4 1.8 L APT engines | 18.44 lbf⋅ft |
All Audi gasoline straight-4 1.8 L APU engines | 18.44 lbf⋅ft |
All Audi gasoline straight-4 1.8 L ARG engines | 18.44 lbf⋅ft |
All Audi gasoline straight-4 1.8 L ARK engines | 18.44 lbf⋅ft |
All Audi gasoline straight-4 1.8 L AWT engines | 18.44 lbf⋅ft |
All other modifications | 7.38 lbf⋅ft |
Coolant pump pulley | 18.44 lbf⋅ft |
Fan wheel | 7.38 lbf⋅ft |
Replace screws. |
M6 | 7.38 lbf⋅ft |
M8 | 16.23 lbf⋅ft |
M10 | 29.5 lbf⋅ft |
M6 | 7.38 lbf⋅ft |
M10 | 33.19 lbf⋅ft |
M6 | 7.38 lbf⋅ft |
All other modifications | 51.63 lbf⋅ft |
All Audi gasoline V6 2.8 L AAH engines | 12.54 lbf⋅ft |
First tighten bearing covers 1 and 3 | |
All Audi gasoline V6 2.6 L ABC engines | 12.54 lbf⋅ft |
First tighten bearing covers 1 and 3 | |
All other modifications | 7.38 lbf⋅ft |
First tighten bearing covers 2 and 4 alternately and in steps |
Third stage | 90° |
First stage | 44.25 lbf⋅ft |
Use new screws. | |
Second stage | 90° |
First stage | 29.5 lbf⋅ft |
Use new screws. | |
Second stage | 90° |
Third stage | 90° |
First stage | 44.25 lbf⋅ft |
Use new screws. | |
Second stage | 90° |
All Audi gasoline V6 2.8 L AAH engines | 5.41 in |
All Audi gasoline V6 2.6 L ABC engines | 5.41 in |
All Audi gasoline straight-4 1.8 L ADR engines | 3.78 in |
AWT engine | 4.53 in |
Otherwise | 3.78 in |
All Audi gasoline straight-4 1.8 L AFY engines | 3.78 in |
All Audi gasoline straight-4 1.8 L APT engines | 3.78 in |
All Audi gasoline straight-4 1.8 L ARG engines | 3.78 in |
All other modifications | 5.24 in |
First stage | 14.75 lbf⋅ft |
Use new screws. | |
Second stage | 90° |
Tighten in steps from inside to outside. |
Valve cover | 7.38 lbf⋅ft |
Gradually tighten screws crosswise. |
First stage | 22.13 lbf⋅ft |
Use new screws. | |
Second stage | 90° |
First stage | 147.51 lbf⋅ft |
Use new screws. | |
Second stage | 90° |
Third stage | 90° |
First stage | 147.51 lbf⋅ft |
Use new screws. | |
Second stage | 90° |
Third stage | 90° |
First stage | 66.38 lbf⋅ft |
Use new screws. | |
Second stage | 90° |
All Audi gasoline V6 2.8 L AAH engines | 18.44 lbf⋅ft |
All Audi gasoline V6 2.6 L ABC engines | 18.44 lbf⋅ft |
All Audi gasoline straight-4 1.8 L ADR engines | 29.5 lbf⋅ft |
use only property class 10.9 | |
All Audi gasoline straight-4 1.8 L AEB engines | 29.5 lbf⋅ft |
use only property class 10.9 | |
All Audi gasoline straight-4 1.8 L AFY engines | 29.5 lbf⋅ft |
use only property class 10.9 | |
All Audi gasoline straight-4 1.8 L ANB engines | 29.5 lbf⋅ft |
use only property class 10.9 | |
All Audi gasoline straight-4 1.8 L APT engines | 29.5 lbf⋅ft |
use only property class 10.9 | |
All Audi gasoline straight-4 1.8 L APU engines | 29.5 lbf⋅ft |
use only property class 10.9 | |
All Audi gasoline straight-4 1.8 L ARG engines | 29.5 lbf⋅ft |
use only property class 10.9 | |
All Audi gasoline straight-4 1.8 L ARK engines | 29.5 lbf⋅ft |
use only property class 10.9 | |
All Audi gasoline straight-4 1.8 L AWT engines | 29.5 lbf⋅ft |
use only property class 10.9 | |
All other modifications | 16.23 lbf⋅ft |
First stage | 44.25 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
Engine block closure screws | 7.38 lbf⋅ft |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 180° |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 180° |
First stage | 44.25 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 44.25 lbf⋅ft |
Replace screws. | |
Second stage | 180° |
First stage | 44.25 lbf⋅ft |
Replace screws. | |
Second stage | 180° |
First stage | 44.25 lbf⋅ft |
Use new screws. | |
Second stage | 180° |
First stage | 44.25 lbf⋅ft |
Use new screws. | |
Second stage | 180° |
First stage | 47.94 lbf⋅ft |
Replace screws and nuts. | |
Second stage | 90° |
First stage | 47.94 lbf⋅ft |
Use new screws. | |
Second stage | 90° |
First stage | Tighten by hand |
Use new screws. | |
Second stage | 44.25 lbf⋅ft |
Tighten the screws cross-wise from inside to outside. | |
Third stage | 90° |
Lateral-fitting screw | 18.44 lbf⋅ft |
Class 10.9 | 29.5 lbf⋅ft |
All other modifications | 16.23 lbf⋅ft |
Camshaft adjuster | 7.38 lbf⋅ft |
M8 | 18.44 lbf⋅ft |
All other modifications | 18.44 lbf⋅ft |
First stage | 22.13 lbf⋅ft |
Replace bolt. | |
Second stage | 180° |
Left | 51.63 lbf⋅ft |
Replace bolt. | |
Right | 51.63 lbf⋅ft |
Replace bolt. |
All Audi gasoline straight-4 1.8 L ADR engines | 47.94 lbf⋅ft |
All Audi gasoline straight-4 1.8 L AEB engines | 47.94 lbf⋅ft |
All Audi gasoline straight-4 1.8 L AFY engines | 47.94 lbf⋅ft |
All Audi gasoline straight-4 1.8 L ANB engines | 47.94 lbf⋅ft |
All Audi gasoline straight-4 1.8 L APT engines | 47.94 lbf⋅ft |
All Audi gasoline straight-4 1.8 L APU engines | 47.94 lbf⋅ft |
All Audi gasoline straight-4 1.8 L ARG engines | 47.94 lbf⋅ft |
All Audi gasoline straight-4 1.8 L ARK engines | 47.94 lbf⋅ft |
All Audi gasoline straight-4 1.8 L AWT engines | 47.94 lbf⋅ft |
Left | 40.57 lbf⋅ft |
Right | 40.57 lbf⋅ft |
All other modifications | 7.38 lbf⋅ft |
Use screw-locking compound. |
Injection pump drive belt tensioning roller | 26.55 lbf⋅ft |
Oil pump drive chain tensioner | 11.8 lbf⋅ft |
do not dismantle | |
Toothed belt guard | 7.38 lbf⋅ft |
Toothed belt guard, rear |
Top | 16.23 lbf⋅ft |
Otherwise | 7.38 lbf⋅ft |
Top | 16.23 lbf⋅ft |
Otherwise | 7.38 lbf⋅ft |
M6 | 7.38 lbf⋅ft |
M8 | 14.75 lbf⋅ft |
All other modifications | 7.38 lbf⋅ft |
Use screw-locking compound. |
Toothed belt guard at the top | 7.38 lbf⋅ft |
Toothed belt guard center | 7.38 lbf⋅ft |
Use screw-locking compound. |
Screws | 33.19 lbf⋅ft |
M6 | 16.23 lbf⋅ft |
M8 | 31.72 lbf⋅ft |
Nuts | 7.38 lbf⋅ft |
Otherwise | 29.5 lbf⋅ft |
Nuts | 7.38 lbf⋅ft |
Screws | 18.44 lbf⋅ft |
Otherwise | 29.5 lbf⋅ft |
All other modifications | 16.23 lbf⋅ft |
All other modifications | 18.44 lbf⋅ft |
All Audi gasoline V6 2.8 L AAH engines | 29.5 lbf⋅ft |
All Audi gasoline V6 2.6 L ABC engines | 29.5 lbf⋅ft |
All Audi gasoline straight-4 1.8 L ADR engines | 36.88 lbf⋅ft |
M14 | 22.13 lbf⋅ft |
M26 | 36.88 lbf⋅ft |
All Audi gasoline straight-4 1.8 L AFY engines | 36.88 lbf⋅ft |
All Audi gasoline straight-4 1.8 L APT engines | 36.88 lbf⋅ft |
All Audi gasoline straight-4 1.8 L ARG engines | 36.88 lbf⋅ft |
All other modifications | 22.13 lbf⋅ft |
All other modifications | 14.75 lbf⋅ft |
All other modifications | 18.44 lbf⋅ft |
All other modifications | 18.44 lbf⋅ft |
Oil sump lower part | 7.38 lbf⋅ft |
Gradually tighten screws crosswise. | |
Oil sump top part | 7.38 lbf⋅ft |
Gradually tighten screws crosswise. |
Oil sump lower part | 7.38 lbf⋅ft |
Gradually tighten screws crosswise. | |
Oil sump top part | 7.38 lbf⋅ft |
Gradually tighten screws crosswise. |
M10 | 33.19 lbf⋅ft |
M6 | 7.38 lbf⋅ft |
Gradually tighten screws crosswise. | |
M7 | 11.06 lbf⋅ft |
Gradually tighten screws crosswise. |
M10 | 33.19 lbf⋅ft |
M8 | 18.44 lbf⋅ft |
M10 | 33.19 lbf⋅ft |
M6 | 7.38 lbf⋅ft |
Gradually tighten screws crosswise. |
Oil sump top part | 33.19 lbf⋅ft |
Oil sump lower part | 7.38 lbf⋅ft |
Gradually tighten screws crosswise. |
Oil sump top part | 7.38 lbf⋅ft |
Gradually tighten screws crosswise. |
Oil sump top part | 11.8 lbf⋅ft |
Gradually tighten screws crosswise. |
Oil sump top part | 16.23 lbf⋅ft |
Cap | 7.38 lbf⋅ft |
Otherwise | 18.44 lbf⋅ft |
M6 | 7.38 lbf⋅ft |
M8 | 18.44 lbf⋅ft |
All other modifications | 2.21 lbf⋅ft |
Crankshaft sensor | 7.38 lbf⋅ft |
Glow plugs | 11.06 lbf⋅ft |
Knock sensor | 14.75 lbf⋅ft |
Lambda sensor | 40.57 lbf⋅ft |
Engine bracket | 33.19 lbf⋅ft |
on the engine block | |
Engine mounting | 18.44 lbf⋅ft |
at subframe |
With ribbing | 55.32 lbf⋅ft |
Replace screws. | |
Without ribbing | 22.13 lbf⋅ft |
Replace screws. |
First stage | 81.13 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 29.5 lbf⋅ft |
Second stage | 90° |
Ribbed screw head. | 55.32 lbf⋅ft |
Otherwise | 22.13 lbf⋅ft |
All Audi gasoline straight-4 1.8 L ADR engines | 18.44 lbf⋅ft |
All Audi gasoline straight-4 1.8 L AEB engines | 20.65 lbf⋅ft |
All Audi gasoline straight-4 1.8 L AFY engines | 18.44 lbf⋅ft |
All Audi gasoline straight-4 1.8 L ANB engines | 20.65 lbf⋅ft |
All Audi gasoline straight-4 1.8 L APT engines | 18.44 lbf⋅ft |
All Audi gasoline straight-4 1.8 L APU engines | 20.65 lbf⋅ft |
All Audi gasoline straight-4 1.8 L ARG engines | 18.44 lbf⋅ft |
All Audi gasoline straight-4 1.8 L ARK engines | 20.65 lbf⋅ft |
All Audi gasoline straight-4 1.8 L AWT engines | 20.65 lbf⋅ft |
M10 | 29.5 lbf⋅ft |
M8 × 22 screws | 20.65 lbf⋅ft |
At the turbocharger | 22.13 lbf⋅ft |
Replace seals and nuts. |
All Audi gasoline V6 2.8 L AAH engines | 14.75 lbf⋅ft |
Replace nuts. | |
All Audi gasoline V6 2.6 L ABC engines | 14.75 lbf⋅ft |
Replace nuts. | |
All other modifications | 18.44 lbf⋅ft |
Replace nuts. |
Exhaust manifold heat shields | 18.44 lbf⋅ft |
Replace nuts. |
All Audi gasoline straight-4 1.8 L ADR engines | 22.13 lbf⋅ft |
Replace nuts. | |
All Audi gasoline straight-4 1.8 L AEB engines | 22.13 lbf⋅ft |
Replace nuts. | |
All Audi gasoline straight-4 1.8 L AFY engines | 22.13 lbf⋅ft |
Replace nuts. | |
All Audi gasoline straight-4 1.8 L ANB engines | 22.13 lbf⋅ft |
Replace nuts. | |
All Audi gasoline straight-4 1.8 L APT engines | 22.13 lbf⋅ft |
Replace nuts. | |
All Audi gasoline straight-4 1.8 L APU engines | 22.13 lbf⋅ft |
Replace nuts. | |
All Audi gasoline straight-4 1.8 L ARG engines | 22.13 lbf⋅ft |
Replace nuts. | |
All Audi gasoline straight-4 1.8 L ARK engines | 22.13 lbf⋅ft |
Replace nuts. | |
All Audi gasoline straight-4 1.8 L AWT engines | 22.13 lbf⋅ft |
Replace nuts. | |
All other modifications | 18.44 lbf⋅ft |
Replace nuts. |
Exhaust pipe bracket | 18.44 lbf⋅ft |
All Audi gasoline straight-4 1.8 L AEB engines | 14.75 lbf⋅ft |
All Audi gasoline straight-4 1.8 L ANB engines | 14.75 lbf⋅ft |
All Audi gasoline straight-4 1.8 L APU engines | 14.75 lbf⋅ft |
All Audi gasoline straight-4 1.8 L ARK engines | 14.75 lbf⋅ft |
All Audi gasoline straight-4 1.8 L AWT engines | 14.75 lbf⋅ft |
All other modifications | 10.62 lbf⋅in |
M12 | 14.75 lbf⋅ft |
Banjo bolts. | |
M14 | 22.13 lbf⋅ft |
Banjo bolts. |
All other modifications | 22.13 lbf⋅ft |
All other modifications | 47.94 lbf⋅ft |
Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 1995 Audi A4 Quattro user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.
Before doing any DIY service please check your insurance policy and Audi warranty policy for your region. In some regions DIY service may invalidate your warranty.
Table of Contents
- Air Conditioning Compressor Oil Capacity
- Air Conditioning Refrigerant Capacity
- Automatic Transmission Fluid Capacity
- Axle Oil Capacity
- Brake Fluid Capacity
- Cooling Fluid Capacity
- Diagnostic Values
- Engine Oil Capacity
- Fluid and Lubricant Specifications
- Gearbox Oil Capacity
- Manual Transmission Oil Capacity
- Steering Fluid Capacity
- Brake System Specifications
- Chassis Specifications
- Cooling System Specifications
- Drive Belts Specifications
- Electrical System Specifications
- Emission
- Engine Fastener Tightening Specifications
- Front Suspension Fastener Tightening Specifications
- Rear Suspension Fastener Tightening Specifications
- Transmission Fastener Tightening Specifications
Conquer your fears and never give up!
DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Audi A4 Quattro service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.
Doing basic service for your 1995 Audi A4 Quattro you're not only saving money, but also also improving your technical skills and learning something new.