2013 Audi A4 Avant Quattro engine fastener tightening specifications

in your garage to make future searches easy.

Condition	Value

expand_moreAir intake system

expand_moreIntake manifold

expand_moreAll Audi diesel straight-4 2.0 L CNHA engines


First stage	Screw in new screw(s) hand-tight.
Second stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Third stage	90°90°90°


All other modifications	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m

expand_moreIntake manifold support

expand_moreAll Audi gasoline straight-4 2.0 L CNCD engines


Nuts	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Screws	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreAll Audi diesel straight-4 2.0 L CNHA engines


First stage	screw in manually up to stop
Second stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreAuxiliary assemblies

expand_moreAuxiliary drive belt deflection pulley


All Audi gasoline straight-4 2.0 L CAEB engines	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreAll Audi diesel straight-4 2.0 L CAGA engines


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Use new screw.
Second stage	90°90°90°


All Audi gasoline straight-4 2.0 L CDNC engines	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
All Audi flexfuel straight-4 2.0 L CFKA engines	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreAll Audi diesel straight-4 2.0 L CGLC engines


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Use new screw.
Second stage	90°90°90°

expand_moreAll Audi diesel straight-4 2.0 L CJCD engines


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Use new screw.
Second stage	90°90°90°

expand_moreAll Audi gasoline V6 3.0 L CMUA engines


Compressor belt	30.98 lbf⋅ft30.98 lbf⋅ft42 N⋅m
Otherwise	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m


All other modifications	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m

expand_moreAuxiliary drive belt tensioner


All Audi gasoline straight-4 2.0 L CAEB engines	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
All Audi diesel straight-4 2.0 L CAGA engines	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m
All Audi gasoline straight-4 2.0 L CDNC engines	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
All Audi flexfuel straight-4 2.0 L CFKA engines	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m

expand_moreAll Audi diesel straight-4 2.0 L CGLC engines


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Use new screw.
Second stage	180°180°180°


All Audi diesel straight-4 2.0 L CJCA engines	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m

expand_moreAll Audi diesel straight-4 2.0 L CJCD engines


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Second stage	180°180°180°

expand_moreAll Audi gasoline straight-4 1.8 L CJEB engines


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Replace screws.
Second stage	45°45°45°

expand_moreAll Audi gasoline V6 3.0 L CMUA engines


Compressor belt	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Otherwise	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m

expand_moreAll Audi gasoline straight-4 2.0 L CNCD engines


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Replace screws.
Second stage	45°45°45°

expand_moreAll Audi diesel straight-4 2.0 L CNHA engines


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll other modifications


First stage	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAir-conditioning compressor


All Audi diesel straight-4 2.0 L CAGA engines	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m
All Audi diesel straight-4 2.0 L CJCA engines	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m

expand_moreAll Audi diesel straight-4 2.0 L CJCD engines

expand_moreAluminium screws


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Second stage	180°180°180°


Steel screws	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m

expand_moreAll Audi gasoline straight-4 2.0 L CNCD engines

expand_moreAluminium screws


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Replace screws.
Second stage	180°180°180°


Steel screws	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m


All other modifications	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m

expand_moreAir-conditioning compressor bracket


All Audi diesel V6 3.0 L CDUC engines	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m

expand_moreAll Audi diesel straight-4 2.0 L CGLC engines

expand_moreM10 × 155 screws


First stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Replace screws.
Second stage	180°180°180°

expand_moreM10 × 40 screws


First stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Replace screws.
Second stage	60°60°60°

expand_moreM10 × 60 screws


First stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Replace screws.
Second stage	60°60°60°

expand_moreAll Audi diesel straight-4 2.0 L CJCD engines

expand_moreM10


First stage	Tighten by hand
Replace screws.
Second stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m

expand_moreM10 × 155 screws


Third stage	180°180°180°

expand_moreM10 × 40 screws


Third stage	60°60°60°

expand_moreM10 × 60 screws


Third stage	60°60°60°


All Audi diesel V6 3.0 L CKVB engines	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
All Audi diesel V6 3.0 L CKVC engines	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m

expand_moreAll Audi gasoline straight-4 2.0 L CNCD engines


First stage	Tighten bolt(s) until hand-tight.
Replace screws.
Second stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Third stage	90°90°90°

expand_moreAll Audi diesel straight-4 2.0 L CNHA engines

expand_moreM10


First stage	Tighten by hand
Replace screws.
Second stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m

expand_moreM10 × 115 screws


Third stage	180°180°180°

expand_moreM10 × 175 screws


Third stage	180°180°180°

expand_moreM10 × 35 screws


Third stage	45°45°45°

expand_moreAll other modifications


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAir-conditioning compressor pressure line


M6	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
M8	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m

expand_moreAlternator

expand_moreAll Audi gasoline straight-4 2.0 L CNCD engines

expand_moreAluminium screws


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Use new screws.
Second stage	180°180°180°


Steel screws	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m


All other modifications	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m

expand_moreGenerator bracket

expand_moreAll Audi gasoline straight-4 2.0 L CDNC engines


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll Audi flexfuel straight-4 2.0 L CFKA engines


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll Audi diesel straight-4 2.0 L CGLC engines

expand_moreM10 × 155 screws


First stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Replace screws.
Second stage	180°180°180°

expand_moreM10 × 40 screws


First stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Replace screws.
Second stage	60°60°60°

expand_moreM10 × 60 screws


First stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Replace screws.
Second stage	60°60°60°

expand_moreAll Audi diesel straight-4 2.0 L CJCD engines

expand_moreM10 × 155 screws


First stage	Tighten by hand
Replace screws.
Second stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Third stage	180°180°180°

expand_moreM10 × 40 screws


First stage	Tighten by hand
Replace screws.
Second stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Third stage	60°60°60°

expand_moreM10 × 60 screws


First stage	Tighten by hand
Replace screws.
Second stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Third stage	60°60°60°

expand_moreAll Audi gasoline straight-4 1.8 L CJEB engines


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll Audi gasoline straight-4 2.0 L CNCD engines


First stage	Tighten bolt(s) until hand-tight.
Replace screws.
Second stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Third stage	90°90°90°

expand_moreAll Audi diesel straight-4 2.0 L CNHA engines

expand_moreM10 × 115 screws


First stage	Tighten by hand
Replace screws.
Second stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Third stage	180°180°180°

expand_moreM10 × 175 screws


First stage	Tighten by hand
Replace screws.
Second stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Third stage	180°180°180°

expand_moreM10 × 35 screws


First stage	Tighten by hand
Replace screws.
Second stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Third stage	45°45°45°


All other modifications	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m

expand_morePower steering pump bracket


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreHydraulic lines at the servo-steering pump

expand_moreAll Audi gasoline straight-4 1.8 L CJEB engines


With active steering	28.03 lbf⋅ft28.03 lbf⋅ft38 N⋅m
Without active steering	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m

expand_moreAll Audi gasoline V6 3.0 L CMUA engines


With active steering	28.03 lbf⋅ft28.03 lbf⋅ft38 N⋅m
Without active steering	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m

expand_moreAll other modifications


M6	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Union nuts	28.03 lbf⋅ft28.03 lbf⋅ft38 N⋅m

expand_moreServo pump pulley

expand_moreAll Audi diesel V6 3.0 L CDUC engines


With active steering	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Without active steering	16.23 lbf⋅ft16.23 lbf⋅ft22 N⋅m

expand_moreAll Audi gasoline V6 3.0 L CMUA engines


With active steering	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Without active steering	16.23 lbf⋅ft16.23 lbf⋅ft22 N⋅m


All other modifications	16.23 lbf⋅ft16.23 lbf⋅ft22 N⋅m

expand_moreServo steering pump

expand_moreAll Audi diesel V6 3.0 L CDUC engines


With active steering	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Without active steering	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m

expand_moreAll Audi gasoline V6 3.0 L CMUA engines


With active steering	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Without active steering	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m


All other modifications	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m


Vacuum pump	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m

expand_moreCarburetion


Injection pump drive wheel	55.32 lbf⋅ft55.32 lbf⋅ft75 N⋅m

expand_moreFuel-distributing pipe


All Audi gasoline straight-4 1.8 L CJEB engines	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
All Audi gasoline V6 3.0 L CMUA engines	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
All Audi gasoline straight-4 2.0 L CNCD engines	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
All Audi diesel straight-4 2.0 L CNHA engines	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
All Audi gasoline V6 3.0 L CRED engines	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
All other modifications	16.23 lbf⋅ft16.23 lbf⋅ft22 N⋅m

expand_moreHigh-pressure line

expand_moreAll Audi gasoline straight-4 1.8 L CJEB engines


Union nuts	19.91 lbf⋅ft19.91 lbf⋅ft27 N⋅m


All Audi gasoline V6 3.0 L CMUA engines	19.91 lbf⋅ft19.91 lbf⋅ft27 N⋅m

expand_moreAll Audi gasoline straight-4 2.0 L CNCD engines


Union nuts	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m


All Audi diesel straight-4 2.0 L CNHA engines	20.65 lbf⋅ft20.65 lbf⋅ft28 N⋅m
All Audi gasoline V6 3.0 L CRED engines	19.91 lbf⋅ft19.91 lbf⋅ft27 N⋅m
All other modifications	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Check compressed air line.

expand_moreHigh-pressure pump


All Audi diesel V6 3.0 L CDUC engines	16.23 lbf⋅ft16.23 lbf⋅ft22 N⋅m

expand_moreAll Audi gasoline straight-4 1.8 L CJEB engines


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Replace screws.
Second stage	90°90°90°


All Audi diesel V6 3.0 L CKVB engines	16.23 lbf⋅ft16.23 lbf⋅ft22 N⋅m
All Audi diesel V6 3.0 L CKVC engines	16.23 lbf⋅ft16.23 lbf⋅ft22 N⋅m
All Audi gasoline V6 3.0 L CMUA engines	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Tighten bolts uniformly in several passes.
All Audi gasoline straight-4 2.0 L CNCD engines	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreAll Audi diesel straight-4 2.0 L CNHA engines

expand_moreM8 × 30 screws


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace screws.
Second stage	45°45°45°

expand_moreM8 × 90 screws


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace screws.
Second stage	180°180°180°


All Audi gasoline V6 3.0 L CRED engines	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Tighten bolts uniformly in several passes.

expand_moreAll other modifications

expand_moreM8 × 28 screws


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace screws.
Second stage	45°45°45°

expand_moreM8 × 90 screws


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace screws.
Second stage	180°180°180°

expand_moreHigh-pressure pump pulley

expand_moreAll Audi diesel V6 3.0 L CDUC engines


Central nuts	51.63 lbf⋅ft51.63 lbf⋅ft70 N⋅m

expand_moreAll Audi diesel straight-4 2.0 L CGLC engines


Central nuts	70.07 lbf⋅ft70.07 lbf⋅ft95 N⋅m
Wheel	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace screws.

expand_moreAll Audi diesel straight-4 2.0 L CNHA engines


Central nuts	70.07 lbf⋅ft70.07 lbf⋅ft95 N⋅m

expand_moreAll other modifications


Central nuts	70.07 lbf⋅ft70.07 lbf⋅ft95 N⋅m
Wheel	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace bolts.

expand_moreInjection hoses


All Audi diesel straight-4 2.0 L CNHA engines	20.65 lbf⋅ft20.65 lbf⋅ft28 N⋅m
All other modifications	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Check compressed air line.

expand_moreInjection nozzle (injector)

expand_moreAll Audi diesel straight-4 2.0 L CAGA engines

expand_moreRetaining clamp


Nuts	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m


Screws	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m

expand_moreAll Audi diesel V6 3.0 L CDUC engines


Retaining clamp	10.33 lbf⋅ft10.33 lbf⋅ft14 N⋅m

expand_moreAll Audi diesel straight-4 2.0 L CGLC engines


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Replace screws.
Second stage	180°180°180°

expand_moreAll Audi diesel straight-4 2.0 L CJCD engines


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Replace screws.
Second stage	180°180°180°

expand_moreAll Audi diesel straight-4 2.0 L CNHA engines


First stage	1.48 lbf⋅ft1.48 lbf⋅ft2 N⋅m
Replace screws.
Second stage	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Third stage	180°180°180°

expand_moreAll other modifications


Retaining clamp	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m

expand_moreInjection pump

expand_moreAll other modifications


High-pressure pump	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_morePressure tube connection


All Audi gasoline straight-4 1.8 L CJEB engines	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Replace components.

expand_moreAll Audi gasoline straight-4 2.0 L CNCD engines


On high-pressure pump	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Replace components.
On rail	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Replace components.

expand_moreCharging

expand_moreCharge air pipes


2.0 TDI quattro with diesel straight-4 2.0 L 188 HP engine (2013.9–2015.12)	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m

expand_moreCharge air compressor


Nuts	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Stud screws	12.54 lbf⋅ft12.54 lbf⋅ft17 N⋅m

expand_moreTurbo charger


All Audi diesel straight-4 2.0 L CSUA engines	17.7 lbf⋅ft17.7 lbf⋅ft24 N⋅m
Replace nuts. Use hot screw paste.
All other modifications	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Replace the nuts and use fitting paste

expand_moreTurbocharger bracket

expand_moreAll Audi diesel straight-4 2.0 L CJCD engines


M10	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
M8	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m


All Audi gasoline straight-4 2.0 L CNCD engines	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m

expand_moreAll Audi diesel straight-4 2.0 L CNHA engines


At the turbocharger	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
On the engine block	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m

expand_moreTurbocharger coolant feed line


2.0 TFSI quattro with gasoline straight-4 2.0 L 221 HP at 4500 RPM, 350 N⋅m at 1500 RPM engine (2013.5–2015.12)	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m

expand_moreTurbocharger coolant return line


2.0 TFSI quattro with gasoline straight-4 2.0 L 221 HP at 4500 RPM, 350 N⋅m at 1500 RPM engine (2013.5–2015.12)	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m

expand_moreTurbocharger oil feed line

expand_moreAll Audi diesel straight-4 2.0 L CJCD engines


Banjo screws	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Replace sealing rings.
Union nuts	16.23 lbf⋅ft16.23 lbf⋅ft22 N⋅m


All Audi gasoline straight-4 2.0 L CNCD engines	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m

expand_moreTurbocharger oil return line


All Audi diesel straight-4 2.0 L CJCD engines	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m

expand_moreAll Audi gasoline straight-4 2.0 L CNCD engines


M6	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
M8	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m

expand_moreAll Audi diesel straight-4 2.0 L CNHA engines


At the turbocharger	10.33 lbf⋅ft10.33 lbf⋅ft14 N⋅m
On engine sump	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m


All Audi diesel straight-4 2.0 L CSUA engines	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m

expand_moreCooling system

expand_moreCoolant pump


All Audi diesel straight-4 2.0 L CAGA engines	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m
All Audi diesel straight-4 2.0 L CGLC engines	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m
All Audi diesel straight-4 2.0 L CJCA engines	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m

expand_moreAll Audi gasoline straight-4 1.8 L CJEB engines


On the engine block	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Tighten cross-wise.
Otherwise	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Tighten cross-wise.

expand_moreAll Audi diesel straight-4 2.0 L CNHA engines


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace screws.
Second stage	45°45°45°


All other modifications	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Gradually tighten screws crosswise.

expand_moreCoolant pump pulley


All Audi gasoline V6 3.0 L CMUA engines	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
All Audi gasoline V6 3.0 L CRED engines	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
All other modifications	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m

expand_moreCoolant pump drive wheel


First stage	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Use new screw. (left-hand thread)
Second stage	90°90°90°

expand_moreCylinder head

expand_moreCamshaft bearing


All Audi diesel straight-4 2.0 L CAGA engines	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Tighten the screws evenly from inside to outside in several steps.

expand_moreAll Audi diesel V6 3.0 L CDUC engines


First stage	Screw in screw(s) by hand.
Note correct order of tensioning.
Second stage	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m

expand_moreAll Audi diesel straight-4 2.0 L CGLC engines


First stage	Tighten bolt(s) until hand-tight.
Note correct order of tensioning.
Second stage	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m


All Audi diesel straight-4 2.0 L CJCA engines	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Tighten the screws evenly from inside to outside in several steps.

expand_moreAll Audi diesel straight-4 2.0 L CJCD engines


First stage	Tighten bolt(s) until hand-tight.
Note correct order of tensioning.
Second stage	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m

expand_moreAll Audi gasoline straight-4 1.8 L CJEB engines

expand_moreAt the cylinder head

expand_moreBearing casing


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Tighten new screws in inside-to-outside order.
Second stage	90°90°90°

expand_moreAll Audi gasoline V6 3.0 L CMUA engines


First stage	Screw in screw(s) by hand.
Use new screws.

expand_moreSecond stage


First step	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Second step	90°90°90°

expand_moreAll Audi gasoline straight-4 2.0 L CNCD engines

expand_moreBearing casing


First stage	Tighten bolt(s) until hand-tight.
Replace screws.
Second stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Third stage	90°90°90°

expand_moreAll Audi diesel straight-4 2.0 L CNHA engines

expand_moreBearing casing


First stage	Tighten bolt(s) until hand-tight.
Note correct order of tensioning.
Second stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m

expand_moreCylinder head screws

expand_moreAll Audi diesel straight-4 2.0 L CAGA engines

expand_moreCAGA engine


First stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Replace screws.
Second stage	44.25 lbf⋅ft44.25 lbf⋅ft60 N⋅m
Third stage	90°90°90°
Fourth stage	90°90°90°

expand_moreCJCA engine


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Replace screws.
Second stage	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
Third stage	90°90°90°
Fourth stage	90°90°90°

expand_moreAll Audi gasoline straight-4 2.0 L CDNC engines

expand_moreScrews 1 – 8


First stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Replace screws.
Second stage	90°90°90°
Third stage	90°90°90°

expand_moreScrews 11 – 14

expand_moreFourth stage


First step	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Replace screws.
Second step	90°90°90°

expand_moreScrews 9 – 10


Fifth stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Replace screws.
Sixth stage	90°90°90°
Seventh stage	90°90°90°

expand_moreAll Audi diesel V6 3.0 L CDUC engines


First stage	Tighten by hand
Replace screws.
Second stage	25.81 lbf⋅ft25.81 lbf⋅ft35 N⋅m
Third stage	51.63 lbf⋅ft51.63 lbf⋅ft70 N⋅m
Fourth stage	90°90°90°
Fifth stage	90°90°90°

expand_moreAll Audi flexfuel straight-4 2.0 L CFKA engines

expand_moreScrews 1 – 8


First stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Replace screws.
Second stage	90°90°90°
Third stage	90°90°90°

expand_moreScrews 9 – 10


Fourth stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Replace screws.
Fifth stage	90°90°90°
Sixth stage	90°90°90°

expand_moreScrews 11 – 14

expand_moreSeventh stage


First step	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Replace screws.
Second step	90°90°90°

expand_moreAll Audi diesel straight-4 2.0 L CGLC engines


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Replace screws.
Second stage	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
Third stage	90°90°90°
Fourth stage	90°90°90°

expand_moreAll Audi diesel straight-4 2.0 L CJCD engines


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Replace screws.
Second stage	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
Third stage	90°90°90°
Fourth stage	90°90°90°

expand_moreAll Audi gasoline straight-4 1.8 L CJEB engines

expand_moreScrew 11

expand_moreFirst stage


First step	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Replace screws.
Second step	90°90°90°

expand_moreScrews 1-10


First stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Replace screws.
Second stage	90°90°90°
Third stage	90°90°90°

expand_moreAll Audi gasoline V6 3.0 L CMUA engines

expand_moreScrews 1 – 8


First stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Replace screws.
Second stage	90°90°90°
Third stage	90°90°90°

expand_moreScrews (M6)

expand_moreFourth stage


First step	2.21 lbf⋅ft2.21 lbf⋅ft3 N⋅m
Replace screws.
Second step	90°90°90°

expand_moreAll Audi gasoline straight-4 2.0 L CNCD engines

expand_moreScrews 1 – 10


First stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Replace screws.
Second stage	90°90°90°
Third stage	90°90°90°

expand_moreScrew 11


Fourth stage	2.95 lbf⋅ft2.95 lbf⋅ft4 N⋅m
Replace screws.
Fifth stage	90°90°90°

expand_moreAll Audi diesel straight-4 2.0 L CNHA engines


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Replace screws.
Second stage	47.94 lbf⋅ft47.94 lbf⋅ft65 N⋅m
Third stage	90°90°90°
Fourth stage	90°90°90°

expand_moreAll other modifications


First stage	25.81 lbf⋅ft25.81 lbf⋅ft35 N⋅m
Use new screws.
Second stage	44.25 lbf⋅ft44.25 lbf⋅ft60 N⋅m
Third stage	90°90°90°
Fourth stage	90°90°90°

expand_moreValve cover

expand_moreAll Audi diesel straight-4 2.0 L CAGA engines


First stage	Tighten by hand
Gradually tighten screws crosswise.
Second stage	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m

expand_moreAll Audi gasoline straight-4 2.0 L CDNC engines

expand_moreAt the cylinder head

expand_moreBearing casing


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Tighten new screws in inside-to-outside order.
Second stage	90°90°90°

expand_moreAll Audi diesel V6 3.0 L CDUC engines


First stage	Screw in screw(s) by hand.
Replace screws.

expand_moreSecond stage


First step	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Second step	90°90°90°

expand_moreAll Audi flexfuel straight-4 2.0 L CFKA engines

expand_moreAt the cylinder head

expand_moreBearing casing


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Tighten new screws in inside-to-outside order.
Second stage	90°90°90°

expand_moreAll Audi gasoline straight-4 1.8 L CJEB engines

expand_moreAt the cylinder head

expand_moreBearing casing


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Tighten new screws in inside-to-outside order.
Second stage	90°90°90°


All other modifications	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Tighten gradually and alternately from inside to outside.


Valve cover locking screws	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m

expand_moreEngine block

expand_moreBalance shaft gear wheel

expand_moreAll Audi diesel straight-4 2.0 L CAGA engines

expand_moreBalance shaft module


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll Audi diesel V6 3.0 L CDUC engines


Central screws	44.25 lbf⋅ft44.25 lbf⋅ft60 N⋅m

expand_moreCentral nuts


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Shaft must be replaced when the screw connection has been loosened.
Second stage	90°90°90°


Wheel	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m

expand_moreAll Audi diesel straight-4 2.0 L CGLC engines


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll Audi diesel straight-4 2.0 L CJCD engines


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll Audi gasoline straight-4 1.8 L CJEB engines

expand_moreBearing pedestal


First stage	2.95 lbf⋅ft2.95 lbf⋅ft4 N⋅m
Replace screws.
Second stage	45°45°45°

expand_moreCoolant pump


First stage	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Use new screw. (left-hand thread)
Second stage	90°90°90°

expand_moreAll Audi gasoline V6 3.0 L CMUA engines


Central screws	44.25 lbf⋅ft44.25 lbf⋅ft60 N⋅m

expand_moreWheel


First stage	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll Audi gasoline straight-4 2.0 L CNCD engines

expand_moreBearing casing


First stage	2.95 lbf⋅ft2.95 lbf⋅ft4 N⋅m
Replace screws.
Second stage	45°45°45°

expand_moreAll other modifications

expand_moreCoolant pump


First stage	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Use new screw. (left-hand thread)
Second stage	90°90°90°


On the engine block	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m

expand_moreBalance shaft module

expand_moreScrews 1 – 6


First stage	Screw in screw(s) finger tight.
Replace screws.
Second stage	4.43 lbf⋅ft4.43 lbf⋅ft6 N⋅m
Fifth stage	90°90°90°

expand_moreScrews 1 – 4


Third stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreScrews 5 – 6


Fourth stage	9.59 lbf⋅ft9.59 lbf⋅ft13 N⋅m

expand_moreConnecting rod bearing

expand_moreAll Audi gasoline straight-4 2.0 L CDNC engines


First stage	33.19 lbf⋅ft33.19 lbf⋅ft45 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll Audi diesel V6 3.0 L CDUC engines


First stage	25.81 lbf⋅ft25.81 lbf⋅ft35 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll Audi flexfuel straight-4 2.0 L CFKA engines


First stage	33.19 lbf⋅ft33.19 lbf⋅ft45 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll Audi gasoline V6 3.0 L CMUA engines


First stage	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll Audi gasoline straight-4 2.0 L CNCD engines


First stage	33.19 lbf⋅ft33.19 lbf⋅ft45 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll other modifications


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreCrankshaft central screws

expand_moreAll Audi diesel straight-4 2.0 L CAGA engines


First stage	132.76 lbf⋅ft132.76 lbf⋅ft180 N⋅m
Use new screw.
Second stage	90°90°90°
Third stage	45°45°45°

expand_moreAll Audi flexfuel straight-4 2.0 L CFKA engines


First stage	110.63 lbf⋅ft110.63 lbf⋅ft150 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll Audi diesel straight-4 2.0 L CGLC engines


First stage	132.76 lbf⋅ft132.76 lbf⋅ft180 N⋅m
Use new screw.
Second stage	90°90°90°
Third stage	45°45°45°

expand_moreAll Audi diesel straight-4 2.0 L CJCD engines


First stage	132.76 lbf⋅ft132.76 lbf⋅ft180 N⋅m
Use new screws.
Second stage	90°90°90°
Third stage	45°45°45°

expand_moreAll Audi diesel straight-4 2.0 L CNHA engines


First stage	132.76 lbf⋅ft132.76 lbf⋅ft180 N⋅m
Replace screws.
Second stage	90°90°90°
Oil screw head support and thread.
Third stage	45°45°45°

expand_moreAll other modifications


First stage	110.63 lbf⋅ft110.63 lbf⋅ft150 N⋅m
Use new screw.
Second stage	90°90°90°

expand_moreCrankshaft pulley

expand_moreAll other modifications


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreDrive plate

expand_moreOn crankshaft


First stage	44.25 lbf⋅ft44.25 lbf⋅ft60 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreEngine block closure screws


All Audi gasoline V6 3.0 L CMUA engines	10.33 lbf⋅ft10.33 lbf⋅ft14 N⋅m
Replace sealing rings.
All Audi gasoline V6 3.0 L CRED engines	10.33 lbf⋅ft10.33 lbf⋅ft14 N⋅m
Replace sealing rings.
All other modifications	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m


Flywheel	44.25 lbf⋅ft44.25 lbf⋅ft60 N⋅m
Replace screws.

expand_moreMain bearing

expand_moreAll Audi diesel straight-4 2.0 L CAGA engines

expand_moreBalance shaft module


First stage	4.43 lbf⋅ft4.43 lbf⋅ft6 N⋅m
Replace screws.

expand_moreBalance shaft module (M7)

expand_moreSecond stage


First step	9.59 lbf⋅ft9.59 lbf⋅ft13 N⋅m
Second step	90°90°90°

expand_moreBalance shaft module (M8)

expand_moreSecond stage


First step	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Second step	90°90°90°

expand_moreBearing cap


First stage	47.94 lbf⋅ft47.94 lbf⋅ft65 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll Audi diesel V6 3.0 L CDUC engines


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Replace screws.

expand_moreSecond stage


First step	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
Second step	180°180°180°

expand_moreAll Audi diesel straight-4 2.0 L CGLC engines

expand_moreBearing cap


First stage	47.94 lbf⋅ft47.94 lbf⋅ft65 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreBalance shaft

expand_moreScrews 1 – 6


First stage	Screw in screw(s) by hand.
Replace screws.
Second stage	4.43 lbf⋅ft4.43 lbf⋅ft6 N⋅m
Fifth stage	90°90°90°

expand_moreScrews 5 – 6


Third stage	9.59 lbf⋅ft9.59 lbf⋅ft13 N⋅m

expand_moreScrews 1 – 4


Fourth stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreAll Audi diesel straight-4 2.0 L CJCD engines


First stage	47.94 lbf⋅ft47.94 lbf⋅ft65 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll Audi gasoline V6 3.0 L CMUA engines

expand_moreScrews 1 – 16

expand_moreFirst stage


First step	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
Replace screws.
Second step	90°90°90°

expand_moreScrews 17 – 31


Second stage	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m


All Audi diesel straight-4 2.0 L CNHA engines	Component must not be knocked down.

expand_moreAll other modifications

expand_moreScrews 1 – 11


First stage	Screw in screw(s) by hand.
Replace screws.

expand_moreScrews 1 – 10


Second stage	47.94 lbf⋅ft47.94 lbf⋅ft65 N⋅m
Third stage	90°90°90°

expand_moreScrew 11


Fourth stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Fifth stage	90°90°90°

expand_moreVibration damper

expand_moreAll Audi diesel V6 3.0 L CDUC engines


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll Audi gasoline straight-4 1.8 L CJEB engines


First stage	110.63 lbf⋅ft110.63 lbf⋅ft150 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll Audi gasoline V6 3.0 L CMUA engines


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll other modifications


First stage	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreEngine control


Balance shaft timing chain guide rail	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Balance shaft timing chain tension rail	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreBottom part of the control unit housing


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Use new screws and tighten them crosswise.
Second stage	45°45°45°

expand_moreCamshaft adjuster

expand_moreAll Audi gasoline straight-4 1.8 L CJEB engines

expand_moreBearing casing


First stage	2.95 lbf⋅ft2.95 lbf⋅ft4 N⋅m
Replace screws.
Second stage	180°180°180°

expand_moreCap


First stage	2.95 lbf⋅ft2.95 lbf⋅ft4 N⋅m
Second stage	45°45°45°

expand_moreInlet camshaft


Central screws	25.81 lbf⋅ft25.81 lbf⋅ft35 N⋅m
Left-hand thread

expand_moreOutlet camshaft


Central screws	25.81 lbf⋅ft25.81 lbf⋅ft35 N⋅m
Left-hand thread

expand_moreAll Audi gasoline V6 3.0 L CMUA engines


First stage	59 lbf⋅ft59 lbf⋅ft80 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll Audi gasoline straight-4 2.0 L CNCD engines

expand_moreBearing casing


First stage	2.95 lbf⋅ft2.95 lbf⋅ft4 N⋅m
Replace screws.
Second stage	180°180°180°

expand_moreCamshaft adjuster valve


First stage	2.95 lbf⋅ft2.95 lbf⋅ft4 N⋅m
Replace screws.
Second stage	45°45°45°


Central screws	25.81 lbf⋅ft25.81 lbf⋅ft35 N⋅m
Left-hand thread

expand_moreAll Audi diesel straight-4 2.0 L CNHA engines


Camshaft adjuster valve	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Cap	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Central screws	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m

expand_moreAll other modifications


Bearing casing	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Cap	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Central screws	25.81 lbf⋅ft25.81 lbf⋅ft35 N⋅m
Left-hand thread

expand_moreCamshaft drive belt deflection pulley

expand_moreAll Audi diesel straight-4 2.0 L CGLC engines

expand_moreM10


First stage	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
Replace screws.
Second stage	90°90°90°


M8	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreAll Audi diesel straight-4 2.0 L CJCD engines

expand_moreM10


First stage	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
Use new screw.
Second stage	90°90°90°


M8	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m


All Audi diesel straight-4 2.0 L CNHA engines	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreAll other modifications

expand_moreM10

expand_moreScrews


First stage	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
Use new screw.
Second stage	90°90°90°


M8	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreCamshaft timing chain guide rail


2.0 TFSI quattro with gasoline straight-4 2.0 L 221 HP at 4500 RPM, 350 N⋅m at 1500 RPM engine (2013.5–2015.12)	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreCamshaft timing chain slip rail


All Audi gasoline straight-4 2.0 L CAEB engines	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
All Audi gasoline straight-4 2.0 L CDNC engines	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
All Audi flexfuel straight-4 2.0 L CFKA engines	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
All Audi gasoline straight-4 1.8 L CJEB engines	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreAll other modifications


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreCamshaft timing chain tensioner

expand_moreAll Audi diesel V6 3.0 L CDUC engines


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll Audi gasoline straight-4 2.0 L CNCD engines


First stage	2.95 lbf⋅ft2.95 lbf⋅ft4 N⋅m
Replace screws.
Second stage	90°90°90°


All other modifications	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m

expand_moreCamshaft timing chain tensioning rail


All other modifications	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreCamshaft timing gear

expand_moreAll Audi diesel straight-4 2.0 L CAGA engines


Central screws	73.76 lbf⋅ft73.76 lbf⋅ft100 N⋅m

expand_moreWheel


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace screws.
Second stage	45°45°45°

expand_moreAll Audi diesel straight-4 2.0 L CGLC engines


Central screws	73.76 lbf⋅ft73.76 lbf⋅ft100 N⋅m
Wheel	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m

expand_moreAll Audi diesel straight-4 2.0 L CJCD engines


Central screws	73.76 lbf⋅ft73.76 lbf⋅ft100 N⋅m
Wheel	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Replace screws. Use screw-locking compound.

expand_moreAll Audi diesel straight-4 2.0 L CNHA engines


Central screws	73.76 lbf⋅ft73.76 lbf⋅ft100 N⋅m
Clamping screws	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m


All other modifications	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m

expand_moreControl drive chain tensioner


All Audi gasoline straight-4 2.0 L CAEB engines	47.94 lbf⋅ft47.94 lbf⋅ft65 N⋅m
All Audi gasoline straight-4 2.0 L CDNC engines	47.94 lbf⋅ft47.94 lbf⋅ft65 N⋅m
All Audi gasoline V6 3.0 L CMUA engines	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
All Audi gasoline V6 3.0 L CRED engines	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
All other modifications	8.85 lbf⋅ft8.85 lbf⋅ft12 N⋅m

expand_moreControl drive sprocket wheel

expand_moreAll Audi gasoline V6 3.0 L CMUA engines

expand_moreAt the bearing pedestal

expand_moreScrews


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Replace screws.
Second stage	60°60°60°

expand_moreBearing pedestal

expand_moreOn the engine block


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Replace screws.
Second stage	45°45°45°

expand_moreOn the engine block

expand_moreCentral screws


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Use new screw.
Second stage	90°90°90°

expand_moreAll other modifications

expand_moreOn bearing casing

expand_moreCentral screws


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Use new screw.
Second stage	90°90°90°

expand_moreOn the engine block

expand_moreBearing casing


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Replace screws.
Second stage	90°90°90°


Central screws	33.19 lbf⋅ft33.19 lbf⋅ft45 N⋅m

expand_moreControl drive timing chain slip rail

expand_moreAll Audi gasoline V6 3.0 L CMUA engines


First stage	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll other modifications

expand_moreRight


Bottom	8.85 lbf⋅ft8.85 lbf⋅ft12 N⋅m
Use screw-locking compound.

expand_moreTop


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreDrive chain balance shaft tensioner

expand_moreAll Audi gasoline V6 3.0 L CMUA engines


First stage	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Replace screws.
Second stage	45°45°45°


All other modifications	62.69 lbf⋅ft62.69 lbf⋅ft85 N⋅m


Injection pump drive belt tensioning roller	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m

expand_moreInlet camshaft wheel


First stage	59 lbf⋅ft59 lbf⋅ft80 N⋅m
Use new screw.
Second stage	90°90°90°

expand_moreIntermediate shaft chain sprocket

expand_moreAll Audi diesel straight-4 2.0 L CAGA engines

expand_moreBalance shaft module


First stage	66.38 lbf⋅ft66.38 lbf⋅ft90 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll Audi diesel straight-4 2.0 L CGLC engines


First stage	66.38 lbf⋅ft66.38 lbf⋅ft90 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll Audi diesel straight-4 2.0 L CJCD engines


First stage	66.38 lbf⋅ft66.38 lbf⋅ft90 N⋅m
Replace the screws and sprocket wheel.
Second stage	90°90°90°

expand_moreAll Audi gasoline straight-4 1.8 L CJEB engines


First stage	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Replace screw and intermediate wheel when loosening the screw.
Second stage	for freedom from play

expand_moreThird stage


First step	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Second step	90°90°90°

expand_moreAll Audi gasoline straight-4 2.0 L CNCD engines


First stage	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Replace screw and intermediate wheel when loosening the screw.
Second stage	for freedom from play
Third stage	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Fourth stage	90°90°90°

expand_moreAll other modifications


First stage	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Replace the screws and sprocket wheel.
Second stage	for freedom from play

expand_moreThird stage


First step	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Second step	90°90°90°

expand_moreOil pump drive chain tensioner

expand_moreAll Audi diesel V6 3.0 L CDUC engines


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll Audi gasoline V6 3.0 L CMUA engines


First stage	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Replace screws.
Second stage	45°45°45°


All other modifications	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m

expand_moreOutlet camshaft wheel

expand_moreAll Audi gasoline V6 3.0 L CMUA engines


First stage	59 lbf⋅ft59 lbf⋅ft80 N⋅m
Use new screw.
Second stage	90°90°90°

expand_moreAll other modifications

expand_moreCentral screws


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreTension rail bearing screws


All Audi diesel V6 3.0 L CDUC engines	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m
All Audi diesel V6 3.0 L CKVB engines	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m
All Audi diesel V6 3.0 L CKVC engines	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m
All other modifications	8.85 lbf⋅ft8.85 lbf⋅ft12 N⋅m
Use screw-locking compound.

expand_moreTiming case cover

expand_moreAll Audi diesel V6 3.0 L CDUC engines

expand_moreScrews 1 – 4


First stage	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m

expand_moreScrews 5 – 24


Second stage	2.21 lbf⋅ft2.21 lbf⋅ft3 N⋅m
Replace screws.
Third stage	2.21 lbf⋅ft2.21 lbf⋅ft3 N⋅m
Control tensioner
Fifth stage	90°90°90°

expand_moreScrews 5 – 10


Fourth stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m

expand_moreAll Audi gasoline V6 3.0 L CMUA engines

expand_moreScrew 1


First stage	2.21 lbf⋅ft2.21 lbf⋅ft3 N⋅m
Replace screws.

expand_moreScrews 2 – 11


Second stage	2.21 lbf⋅ft2.21 lbf⋅ft3 N⋅m
Use new screws and tighten them crosswise.

expand_moreScrews 1, 2, 3, 6, and 8


Third stage	90°90°90°

expand_moreScrew 4


Fifth stage	11.8 lbf⋅ft11.8 lbf⋅ft16 N⋅m

expand_moreScrew 7

expand_moreSixth stage


First step	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Second step	90°90°90°

expand_moreScrews 9 – 11

expand_moreFourth stage


First step	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Second step	90°90°90°

expand_moreAll other modifications


M6	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
M8	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m

expand_moreTiming case cover cylinder row 1

expand_moreAll Audi diesel V6 3.0 L CDUC engines


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Replace bolts and tighten crosswise.
Second stage	90°90°90°

expand_moreAll Audi gasoline V6 3.0 L CMUA engines


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll other modifications


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreTiming case cover cylinder row 2

expand_moreAll Audi diesel V6 3.0 L CDUC engines


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Replace bolts and tighten crosswise.
Second stage	90°90°90°

expand_moreAll Audi gasoline V6 3.0 L CMUA engines


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll other modifications


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Replace screws.
Second stage	90°90°90°


Toothed belt guard	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Toothed belt guard at the bottom	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Toothed belt guard center	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m

expand_moreToothed belt tensioning roller


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace nuts.
Second stage	45°45°45°

expand_moreTop part of control unit housing

expand_moreAll Audi gasoline V6 3.0 L CMUA engines


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Replace screws.
Second stage	90°90°90°


All other modifications	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
Tighten cross-wise.

expand_moreEngine lubrication

expand_moreOil cooler


All Audi diesel straight-4 2.0 L CAGA engines	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m

expand_moreAll Audi gasoline straight-4 2.0 L CDNC engines


Heat-exchanger on oil filter housing	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m

expand_moreAll Audi flexfuel straight-4 2.0 L CFKA engines


Heat-exchanger on oil filter housing	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m


All Audi diesel straight-4 2.0 L CGLC engines	5.16 lbf⋅ft5.16 lbf⋅ft7 N⋅m
All Audi diesel straight-4 2.0 L CJCA engines	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
All Audi diesel straight-4 2.0 L CJCD engines	8.11 lbf⋅ft8.11 lbf⋅ft11 N⋅m

expand_moreAll Audi gasoline straight-4 1.8 L CJEB engines


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Second stage	45°45°45°

expand_moreAll Audi gasoline straight-4 2.0 L CNCD engines


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Replace screws.
Second stage	45°45°45°


All Audi diesel straight-4 2.0 L CSUA engines	8.11 lbf⋅ft8.11 lbf⋅ft11 N⋅m
All other modifications	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m


Oil drain plug	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Replace sealing rings.

expand_moreOil filter


Oil filter cover	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Slightly oil sealing lips.

expand_moreOil filter housing

expand_moreAll Audi diesel straight-4 2.0 L CAGA engines


Oil filter cover	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m

expand_moreOn the engine block


First stage	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m
Tighten alternately starting from the top left
Second stage	90°90°90°
Use new screws.

expand_moreAll Audi diesel V6 3.0 L CDUC engines


Oil filter cover	25.81 lbf⋅ft25.81 lbf⋅ft35 N⋅m
On the engine block	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m

expand_moreAll Audi diesel straight-4 2.0 L CGLC engines


Oil filter cover	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m

expand_moreOn the engine block


First stage	10.33 lbf⋅ft10.33 lbf⋅ft14 N⋅m
Use new screws and tighten them crosswise.
Second stage	90°90°90°

expand_moreAll Audi diesel straight-4 2.0 L CJCD engines

expand_moreOn the engine block


First stage	10.33 lbf⋅ft10.33 lbf⋅ft14 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll Audi gasoline straight-4 1.8 L CJEB engines


Oil filter cover	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m

expand_moreAll Audi gasoline V6 3.0 L CMUA engines


Cap	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
On the engine block	9.59 lbf⋅ft9.59 lbf⋅ft13 N⋅m

expand_moreAll Audi gasoline straight-4 2.0 L CNCD engines


First stage	Screw in screws by hand.
Use new screws and tighten them crosswise.
Second stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Third stage	90°90°90°

expand_moreAll Audi diesel straight-4 2.0 L CNHA engines


Oil filter cover	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Replace sealing rings.

expand_moreOn the engine block


First stage	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace screws.
Second stage	90°90°90°


Oil pressure sensor	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreOil pump


All Audi diesel straight-4 2.0 L CJCD engines	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m

expand_moreAll Audi gasoline straight-4 1.8 L CJEB engines


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Use new screws
Second stage	90°90°90°


All Audi gasoline V6 3.0 L CMUA engines	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m

expand_moreAll Audi diesel straight-4 2.0 L CNHA engines


First stage	8.85 lbf⋅ft8.85 lbf⋅ft12 N⋅m
Replace screws.
Second stage	180°180°180°


All Audi gasoline V6 3.0 L CRED engines	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
All Audi diesel straight-4 2.0 L CSUA engines	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m

expand_moreAll other modifications


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreOil pump chain wheel

expand_moreAll Audi diesel V6 3.0 L CDUC engines


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Replace screws.
Second stage	45°45°45°

expand_moreAll Audi gasoline V6 3.0 L CMUA engines


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Replace screws.
Second stage	90°90°90°


All other modifications	44.25 lbf⋅ft44.25 lbf⋅ft60 N⋅m

expand_moreOil sump

expand_moreAll Audi diesel straight-4 2.0 L CAGA engines

expand_moreAt the gearbox


First stage	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m
Replace screws.
Second stage	90°90°90°


M10	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
M7	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m
Gradually tighten screws crosswise.

expand_moreAll Audi diesel V6 3.0 L CDUC engines

expand_moreOil sump lower part


First stage	2.21 lbf⋅ft2.21 lbf⋅ft3 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreOil sump top part


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Replace screws.
Second stage	90°90°90°
Locking screws	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
TDC marking.

expand_moreAll Audi diesel straight-4 2.0 L CJCD engines

expand_moreOn the engine block


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
tighten gradually cross-wise

expand_moreAt the gearbox (M10)


Second stage	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m
Third stage	90°90°90°

expand_moreOn the engine block (M7)


Fourth stage	9.59 lbf⋅ft9.59 lbf⋅ft13 N⋅m
tighten gradually cross-wise

expand_moreOn the engine block (M10)


Fifth stage	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m

expand_moreAll Audi gasoline straight-4 1.8 L CJEB engines

expand_moreOil sump top part

expand_moreScrews 1 – 14


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Replace screws.

expand_moreScrews 1 – 2


Second stage	180°180°180°

expand_moreScrews 3 – 9


Third stage	45°45°45°

expand_moreCJEB engine top part of the oil sump (screws 10)


Fourth stage	180°180°180°

expand_moreCJEB engine top part of the oil sump (screws 11 – 14)


Fifth stage	90°90°90°

expand_morePlastic oil sump

expand_moreOil sump lower part


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreSheet-steel sump

expand_moreOil sump lower part


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll Audi gasoline V6 3.0 L CMUA engines

expand_moreOil sump lower part


First stage	2.21 lbf⋅ft2.21 lbf⋅ft3 N⋅m
Use new screws and tighten them crosswise.
Second stage	90°90°90°

expand_moreOil sump top part


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Use new screws and tighten them crosswise.
Second stage	90°90°90°

expand_moreAll Audi gasoline straight-4 2.0 L CNCD engines

expand_moreOil sump lower part from sheet metal


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreOil sump top part

expand_moreScrews 1 – 14


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Replace screws.

expand_moreScrews 1 – 2


Second stage	180°180°180°

expand_moreScrews 3 – 9


Third stage	45°45°45°

expand_moreOil sump top part (screw 10)


Fourth stage	180°180°180°

expand_moreOil sump top part (screws 11 – 14)


Fifth stage	90°90°90°

expand_moreWith plastic housing oil sump lower part


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll Audi diesel straight-4 2.0 L CNHA engines

expand_moreOn the engine block


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m

expand_moreAt the gearbox


Second stage	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m
Third stage	90°90°90°

expand_moreOn the engine block (M10)


Fifth stage	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m

expand_moreOn the engine block (M7)


Fourth stage	9.59 lbf⋅ft9.59 lbf⋅ft13 N⋅m

expand_moreAll other modifications

expand_moreOil sump lower part


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Replace screws.
Second stage	45°45°45°

expand_moreOil sump top part


First stage	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreEngine management


Camshaft sensor	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
Use new screw.

expand_moreCrankshaft sensor


All Audi diesel straight-4 2.0 L CGLC engines	3.32 lbf⋅ft3.32 lbf⋅ft4.5 N⋅m
All Audi diesel straight-4 2.0 L CJCD engines	3.32 lbf⋅ft3.32 lbf⋅ft4.5 N⋅m
All Audi gasoline straight-4 1.8 L CJEB engines	7.38 lbf⋅ft7.38 lbf⋅ft10 N⋅m
All Audi diesel straight-4 2.0 L CNHA engines	3.32 lbf⋅ft3.32 lbf⋅ft4.5 N⋅m
All Audi diesel straight-4 2.0 L CSUA engines	3.32 lbf⋅ft3.32 lbf⋅ft4.5 N⋅m
All other modifications	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m

expand_moreExhaust gas temperature sensor

expand_moreAll Audi diesel straight-4 2.0 L CJCD engines


At the turbocharger	33.19 lbf⋅ft33.19 lbf⋅ft45 N⋅m
On particle filter	44.25 lbf⋅ft44.25 lbf⋅ft60 N⋅m

expand_moreAll Audi diesel straight-4 2.0 L CNHA engines


On exhaust manifold	33.19 lbf⋅ft33.19 lbf⋅ft45 N⋅m
On particle filter	44.25 lbf⋅ft44.25 lbf⋅ft60 N⋅m

expand_moreGlow plugs

expand_moreAll Audi diesel straight-4 2.0 L CNHA engines


With combustion chamber pressure sensor	8.85 lbf⋅ft8.85 lbf⋅ft12 N⋅m
Without combustion chamber pressure sensor	12.54 lbf⋅ft12.54 lbf⋅ft17 N⋅m


All other modifications	12.54 lbf⋅ft12.54 lbf⋅ft17 N⋅m

expand_moreKnock sensor

expand_moreAll Audi gasoline straight-4 2.0 L CNCD engines


First stage	5.9 lbf⋅ft5.9 lbf⋅ft8 N⋅m
Replace screws.
Second stage	90°90°90°


All other modifications	14.75 lbf⋅ft14.75 lbf⋅ft20 N⋅m
Replace screws.

expand_moreLambda sensor


All Audi diesel straight-4 2.0 L CAGA engines	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
All Audi diesel straight-4 2.0 L CJCA engines	36.88 lbf⋅ft36.88 lbf⋅ft50 N⋅m
All Audi gasoline straight-4 2.0 L CNCD engines	44.25 lbf⋅ft44.25 lbf⋅ft60 N⋅m
All Audi diesel straight-4 2.0 L CNHA engines	38.35 lbf⋅ft38.35 lbf⋅ft52 N⋅m
All other modifications	40.57 lbf⋅ft40.57 lbf⋅ft55 N⋅m

expand_moreEngine mounting


Engine bracket	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m

expand_moreEngine mounting


At the subframe	40.57 lbf⋅ft40.57 lbf⋅ft55 N⋅m

expand_moreOn engine bracket


First stage	66.38 lbf⋅ft66.38 lbf⋅ft90 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreSubframe

expand_moreOn chassis


First stage	84.82 lbf⋅ft84.82 lbf⋅ft115 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreSubframe diagonal strut

expand_moreAll Audi diesel straight-4 2.0 L CJCD engines


First stage	66.38 lbf⋅ft66.38 lbf⋅ft90 N⋅m
Use new screws.
Second stage	90°90°90°

expand_moreAll other modifications

expand_moreM12 × 42 screws


First stage	66.38 lbf⋅ft66.38 lbf⋅ft90 N⋅m
Use new screws.
Second stage	135°135°135°

expand_moreM12 × 50 screws


First stage	66.38 lbf⋅ft66.38 lbf⋅ft90 N⋅m
Use new screws.
Second stage	90°90°90°

expand_moreTorque arm

expand_moreOn chassis


Cross support	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m


On the engine block	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m

expand_moreExhaust system

expand_moreCatalytic converter


All Audi gasoline straight-4 2.0 L CAEB engines	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Replace nuts.
All Audi gasoline straight-4 2.0 L CDNC engines	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Replace nuts.
All Audi flexfuel straight-4 2.0 L CFKA engines	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Replace nuts.
All Audi gasoline straight-4 2.0 L CNCD engines	29.5 lbf⋅ft29.5 lbf⋅ft40 N⋅m
Replace nuts. Use hot screw paste.
All other modifications	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m
Replace the nuts and use fitting paste

expand_moreCatalytic converter bracket


2.0 TFSI quattro with gasoline straight-4 2.0 L 221 HP at 4500 RPM, 350 N⋅m at 1500 RPM engine (2013.5–2015.12)	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m

expand_moreDiesel particulate filter


All Audi diesel straight-4 2.0 L CGLC engines	17.7 lbf⋅ft17.7 lbf⋅ft24 N⋅m
Replace nuts. Use hot screw paste.

expand_moreAll Audi diesel straight-4 2.0 L CNHA engines

expand_moreAt the turbocharger


Clamps	5.16 lbf⋅ft5.16 lbf⋅ft7 N⋅m
Use new parts.


All other modifications	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m
Replace nuts. Use hot screw paste.

expand_moreExhaust manifold

expand_moreAll Audi gasoline straight-4 2.0 L CDNC engines


Bottom	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Replace the nuts and use fitting paste

expand_moreTop


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Replace nuts.
Second stage	8.85 lbf⋅ft8.85 lbf⋅ft12 N⋅m
Third stage	11.8 lbf⋅ft11.8 lbf⋅ft16 N⋅m
Fourth stage	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m

expand_moreAll Audi diesel V6 3.0 L CDUC engines


At the cylinder head	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Replace nuts. Use hot screw paste.

expand_moreAt the turbocharger


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Replace screws. Use hot screw paste.
Second stage	90°90°90°

expand_moreAll Audi flexfuel straight-4 2.0 L CFKA engines

expand_moreNuts


Bottom	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Replace nuts.

expand_moreTop nuts


First stage	3.69 lbf⋅ft3.69 lbf⋅ft5 N⋅m
Replace nuts.
Second stage	8.85 lbf⋅ft8.85 lbf⋅ft12 N⋅m
Tighten cross-wise.
Third stage	11.8 lbf⋅ft11.8 lbf⋅ft16 N⋅m
Fourth stage	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m

expand_moreAll Audi diesel straight-4 2.0 L CNHA engines


First stage	8.11 lbf⋅ft8.11 lbf⋅ft11 N⋅m
Tighten crosswise from inside to outside.
Second stage	16.23 lbf⋅ft16.23 lbf⋅ft22 N⋅m
Third stage	16.23 lbf⋅ft16.23 lbf⋅ft22 N⋅m
Control tensioner


All other modifications	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
Replace the nuts and use fitting paste

expand_moreExhaust manifold heat shields


All Audi diesel straight-4 2.0 L CJCD engines	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m
All Audi gasoline straight-4 2.0 L CNCD engines	6.64 lbf⋅ft6.64 lbf⋅ft9 N⋅m
All Audi diesel straight-4 2.0 L CNHA engines	11.06 lbf⋅ft11.06 lbf⋅ft15 N⋅m
All Audi diesel straight-4 2.0 L CSUA engines	18.44 lbf⋅ft18.44 lbf⋅ft25 N⋅m


Exhaust pipe	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m
Replace nuts. Use hot screw paste.
Exhaust pipe bracket	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m
Exhaust pipe rear	16.96 lbf⋅ft16.96 lbf⋅ft23 N⋅m

expand_moreIgnition system


Spark plugs	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m

expand_moreStart system

expand_moreStarter

expand_moreAll Audi diesel straight-4 2.0 L CAGA engines


M10	47.94 lbf⋅ft47.94 lbf⋅ft65 N⋅m

expand_moreM12


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll Audi diesel straight-4 2.0 L CGLC engines


M10	47.94 lbf⋅ft47.94 lbf⋅ft65 N⋅m

expand_moreM12


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Replace screws.
Second stage	90°90°90°

expand_moreAll Audi diesel straight-4 2.0 L CJCD engines


M10	47.94 lbf⋅ft47.94 lbf⋅ft65 N⋅m

expand_moreM12 × 100 screws


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Second stage	90°90°90°

expand_moreAll Audi gasoline V6 3.0 L CMUA engines


M10 × 50 screws	47.94 lbf⋅ft47.94 lbf⋅ft65 N⋅m

expand_moreM12


First stage	22.13 lbf⋅ft22.13 lbf⋅ft30 N⋅m
Second stage	90°90°90°


All other modifications	47.94 lbf⋅ft47.94 lbf⋅ft65 N⋅m

Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2013 Audi A4 Avant Quattro user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.

Before doing any DIY service please check your insurance policy and Audi warranty policy for your region. In some regions DIY service may invalidate your warranty.

Maintenance Items

Engine Fastener Tightening Specifications
Front Suspension Fastener Tightening Specifications
Rear Suspension Fastener Tightening Specifications
Transmission Fastener Tightening Specifications

Service Intervals

Conquer your fears and never give up!

DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Audi A4 Avant Quattro service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.

Doing basic service for your 2013 Audi A4 Avant Quattro you're not only saving money, but also also improving your technical skills and learning something new.

2013 Audi A4 Avant Quattro B8 facelift Engine Fastener Tightening Specifications

Table of Contents

Conquer your fears and never give up!

Audi A4 Avant Quattro B8 facelift model years

Suggest edit