2013 Audi A3 Third generation Front Suspension Fastener Tightening Specifications
in your garage to make future searches easy.
Condition | Value |
---|
Bleed valve | 7.38 lbf⋅ft |
At the brake caliper | 25.81 lbf⋅ft |
Socket unions | 10.33 lbf⋅ft |
Front axle brake caliper | 25.81 lbf⋅ft |
Replace screws. | |
Front axle brake caliper mounting support | 147.51 lbf⋅ft |
Replace screws. | |
Front axle brake disc | 2.95 lbf⋅ft |
Replace screws. | |
Front axle brake mounting | 147.51 lbf⋅ft |
Use new screws. | |
Wheel speed sensor | 5.9 lbf⋅ft |
First stage | 14.75 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
Steering column | 14.75 lbf⋅ft |
Use new screws. |
First stage | 51.63 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
Steering gear heat protection plate | 4.43 lbf⋅ft |
First stage | 22.13 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 14.75 lbf⋅ft |
Replace nuts. | |
Second stage | 90° |
Track rod end on track rod | 51.63 lbf⋅ft |
Track rod on steering gear | 73.76 lbf⋅ft |
First stage | 11.06 lbf⋅ft |
Replace bolts. | |
Second stage | 90° |
Shock-absorber piston rod | 44.25 lbf⋅ft |
Replace nuts. |
First stage | 11.06 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 51.63 lbf⋅ft |
Replace screws and nuts. | |
Second stage | 180° |
First stage | 7.38 lbf⋅ft |
Replace screws. | |
Second stage | 51.63 lbf⋅ft |
First stage | 7.38 lbf⋅ft |
Replace screws. | |
Second stage | 29.5 lbf⋅ft |
First stage | 147.51 lbf⋅ft |
Replace screws. | |
Second stage | 180° |
Stabiliser mounting at the stabiliser | 47.94 lbf⋅ft |
Replace nuts. | |
Stabiliser mounting at suspension strut | 47.94 lbf⋅ft |
Replace nuts. |
First stage | 14.75 lbf⋅ft |
Replace screws. | |
Second stage | 180° |
Support joint at the stub axle | 44.25 lbf⋅ft |
Replace nuts. | |
Support joint at the transverse control arm | 73.76 lbf⋅ft |
Replace nuts. | |
Supporting joint on the suspension strut mounting | 44.25 lbf⋅ft |
Replace nuts. |
First stage | 51.63 lbf⋅ft |
Replace bolts. | |
Second stage | 180° |
First stage | 51.63 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
Torx screws | 2.95 lbf⋅ft |
Union nuts | 5.9 lbf⋅ft |
Wheel attachment | 88.51 lbf⋅ft |
Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2013 Audi A3 user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.
Before doing any DIY service please check your insurance policy and Audi warranty policy for your region. In some regions DIY service may invalidate your warranty.
Table of Contents
- Air Conditioning Compressor Oil Capacity
- Air Conditioning Refrigerant Capacity
- Brake Fluid Capacity
- Cooling Fluid Capacity
- Engine Oil Capacity
- Fluid and Lubricant Specifications
- Manual Transmission Oil Capacity
- Brake System Specifications
- Chassis Specifications
- Cooling System Specifications
- Electrical System Specifications
- Emission
- Chassis and Body Fastener Tightening Specifications
- Engine Fastener Tightening Specifications
- Front Suspension Fastener Tightening Specifications
- Rear Suspension Fastener Tightening Specifications
- Transmission Fastener Tightening Specifications
Conquer your fears and never give up!
DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Audi A3 service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.
Doing basic service for your 2013 Audi A3 you're not only saving money, but also also improving your technical skills and learning something new.