2010 Audi A3 Sportback First generation facelift Engine Fastener Tightening Specifications
in your garage to make future searches easy.
Condition | Value |
---|
Induction-pipe flap control unit | 7.38 lbf⋅ft |
Lower section of intake manifold | 14.75 lbf⋅ft |
Upper section of intake manifold | 14.75 lbf⋅ft |
1.6 TDI with diesel straight-4 1.6 L 103 HP engine (2009.5–2013.3) | 5.9 lbf⋅ft |
1.6 TDI with diesel straight-4 1.6 L 89 HP at 4200 RPM, 230 N⋅m at 1500 RPM engine (2009.5–2013.3) | 5.9 lbf⋅ft |
1.8 TFSI with gasoline straight-4 1.8 L 158 HP at 4500 RPM, 250 N⋅m at 1500 RPM engine (2006.11–2013.3) | 6.64 lbf⋅ft |
1.8 TFSI with gasoline straight-4 1.8 L 158 HP at 5000 RPM, 250 N⋅m at 1500 RPM engine (2006.11–2013.3) | 6.64 lbf⋅ft |
1.8 TFSI with gasoline straight-4 1.8 L 158 HP at 5000 RPM, 250 N⋅m at 1500 RPM engine (2006.11–2013.3) | 6.64 lbf⋅ft |
1.9 TDI with diesel straight-4 1.9 L 103 HP at 4000 RPM, 250 N⋅m at 1900 RPM engine (2004.9–2010.5) | 16.23 lbf⋅ft |
1.9 TDI with diesel straight-4 1.9 L 103 HP at 4000 RPM, 250 N⋅m at 1900 RPM engine (2004.9–2010.5) | 16.23 lbf⋅ft |
1.9 TDI with diesel straight-4 1.9 L 103 HP engine (2004.9–2010.5) | 16.23 lbf⋅ft |
2.0 (2006.6–2013.3) | 7.38 lbf⋅ft |
BKD engine | 16.23 lbf⋅ft |
CBAB engine | 5.9 lbf⋅ft |
AZV engine | 16.23 lbf⋅ft |
CBAA engine | 5.9 lbf⋅ft |
BMN engine | 16.23 lbf⋅ft |
CBBB engine | 5.9 lbf⋅ft |
Engine with belt control | 7.38 lbf⋅ft |
Engine with chain drive | 6.64 lbf⋅ft |
All other modifications | 14.75 lbf⋅ft |
Auxiliary drive belt deflection pulley | 29.5 lbf⋅ft |
Engine with belt control | 16.96 lbf⋅ft |
Engine with chain drive | 7.38 lbf⋅ft |
AZV engine | 18.44 lbf⋅ft |
CBAA engine | 16.96 lbf⋅ft |
All Audi diesel straight-4 1.9 L BKC engines | 18.44 lbf⋅ft |
BKD engine | 18.44 lbf⋅ft |
With automatic tensioner | 16.96 lbf⋅ft |
All Audi diesel straight-4 1.9 L BLS engines | 18.44 lbf⋅ft |
BMN engine | 18.44 lbf⋅ft |
With automatic tensioner | 16.96 lbf⋅ft |
All Audi diesel straight-4 1.9 L BXE engines | 18.44 lbf⋅ft |
All Audi gasoline straight-4 1.8 L BYT engines | 7.38 lbf⋅ft |
All Audi gasoline straight-4 1.8 L BZB engines | 7.38 lbf⋅ft |
First stage | 14.75 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 14.75 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
All Audi gasoline straight-4 1.8 L CDAA engines | 7.38 lbf⋅ft |
All other modifications | 16.96 lbf⋅ft |
All Audi diesel straight-4 1.9 L BKC engines | 16.96 lbf⋅ft |
All Audi diesel straight-4 1.9 L BLS engines | 16.96 lbf⋅ft |
All Audi diesel straight-4 1.9 L BXE engines | 16.96 lbf⋅ft |
First stage | 22.13 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
Air-conditioning compressor | 18.44 lbf⋅ft |
Engine with belt control | 29.5 lbf⋅ft |
First stage | 14.75 lbf⋅ft |
Second stage | 90° |
AZV engine | 33.19 lbf⋅ft |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 45° |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 45° |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
Otherwise | 33.19 lbf⋅ft |
First stage | Tighten by hand |
First step | 14.75 lbf⋅ft |
Second step | 90° |
All Audi gasoline straight-4 1.2 L CBZB engines | 16.96 lbf⋅ft |
All other modifications | 33.19 lbf⋅ft |
Use screw-locking compound. |
Air-conditioning compressor pressure line | 18.44 lbf⋅ft |
Alternator | 18.44 lbf⋅ft |
Engine with belt control | 29.5 lbf⋅ft |
First stage | 14.75 lbf⋅ft |
Second stage | 90° |
AZV engine | 33.19 lbf⋅ft |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 45° |
First stage | 29.5 lbf⋅ft |
Second stage | 90° |
First stage | 29.5 lbf⋅ft |
Second stage | 45° |
Otherwise | 33.19 lbf⋅ft |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 45° |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
Otherwise | 33.19 lbf⋅ft |
First stage | Tighten by hand |
First step | 14.75 lbf⋅ft |
Second step | 90° |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 45° |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
All Audi gasoline straight-4 1.2 L CBZB engines | 18.44 lbf⋅ft |
All other modifications | 33.19 lbf⋅ft |
Engine with chain drive | 6.64 lbf⋅ft |
M6 | 7.38 lbf⋅ft |
M8 | 14.75 lbf⋅ft |
CBAA engine | 6.64 lbf⋅ft |
M6 | 7.38 lbf⋅ft |
M8 | 14.75 lbf⋅ft |
M6 | 7.38 lbf⋅ft |
M8 | 14.75 lbf⋅ft |
CBAB engine | 6.64 lbf⋅ft |
M6 | 7.38 lbf⋅ft |
M8 | 14.75 lbf⋅ft |
CBBB engine | 6.64 lbf⋅ft |
All other modifications | 6.64 lbf⋅ft |
Exhaust gas return cooler | 7.38 lbf⋅ft |
Exhaust gas return valve | 7.38 lbf⋅ft |
Nuts | 18.44 lbf⋅ft |
Replace sealing rings. | |
Screws | 16.23 lbf⋅ft |
Replace sealing rings. |
CBAA engine | 14.75 lbf⋅ft |
Replace sealing rings. |
All Audi diesel straight-4 1.9 L BKC engines | 18.44 lbf⋅ft |
Replace sealing rings. |
Nuts | 18.44 lbf⋅ft |
Replace sealing rings. | |
Screws | 16.23 lbf⋅ft |
Replace sealing rings. |
CBAB engine | 14.75 lbf⋅ft |
Replace sealing rings. |
All Audi diesel straight-4 1.9 L BLS engines | 18.44 lbf⋅ft |
Replace sealing rings. |
Nuts | 14.75 lbf⋅ft |
Replace seals and nuts. | |
Screws | 14.75 lbf⋅ft |
Replace sealing rings. |
All Audi diesel straight-4 1.9 L BXE engines | 18.44 lbf⋅ft |
Replace sealing rings. |
Clamps | 2.95 lbf⋅ft |
Nuts | 16.23 lbf⋅ft |
Replace sealing rings. | |
Screws | 6.64 lbf⋅ft |
Replace sealing rings. |
1.2 TSI with gasoline straight-4 1.2 L 103 HP engine (2010.4–2013.3) | 14.75 lbf⋅ft |
1.6 TDI with diesel straight-4 1.6 L 103 HP engine (2009.5–2013.3) | 16.23 lbf⋅ft |
1.6 TDI with diesel straight-4 1.6 L 89 HP at 4200 RPM, 230 N⋅m at 1500 RPM engine (2009.5–2013.3) | 16.23 lbf⋅ft |
2.0 (2006.6–2013.3) | 7.38 lbf⋅ft |
CBAB engine | 16.23 lbf⋅ft |
CBAA engine | 16.23 lbf⋅ft |
CBBB engine | 16.23 lbf⋅ft |
1.2 TSI with gasoline straight-4 1.2 L 103 HP engine (2010.4–2013.3) | 18.44 lbf⋅ft |
Banjo screws | 18.44 lbf⋅ft |
Replace banjo bolts. |
1.2 TSI with gasoline straight-4 1.2 L 103 HP engine (2010.4–2013.3) | 14.75 lbf⋅ft |
2.0 (2006.6–2013.3) | 7.38 lbf⋅ft |
Central nuts | 70.07 lbf⋅ft |
Wheel | 14.75 lbf⋅ft |
Replace screws. |
All Audi diesel straight-4 1.6 L CAYB engines | 20.65 lbf⋅ft |
All Audi diesel straight-4 1.6 L CAYC engines | 20.65 lbf⋅ft |
All other modifications | 18.44 lbf⋅ft |
First stage | 2.21 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
Third stage | 180° |
CBAA engine | 7.38 lbf⋅ft |
First stage | 8.85 lbf⋅ft |
Replace screws. | |
Second stage | 270° |
First stage | 2.21 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
Third stage | 180° |
CBAB engine | 7.38 lbf⋅ft |
First stage | 2.21 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
Third stage | 180° |
Nuts | 7.38 lbf⋅ft |
Screws | 3.69 lbf⋅ft |
First stage | 5.9 lbf⋅ft |
Replace screws. | |
Second stage | 180° |
First stage | 5.9 lbf⋅ft |
Second stage | 180° |
First stage | 5.9 lbf⋅ft |
Use new screw. | |
Second stage | 180° |
Pressure tube connection | 29.5 lbf⋅ft |
Engine with belt control | 7.38 lbf⋅ft |
Engine with chain drive | 7.38 lbf⋅ft |
Replace screws. |
Engine with chain drive | 14.75 lbf⋅ft |
Replace screws. |
CBAA engine | 14.75 lbf⋅ft |
CBAB engine | 14.75 lbf⋅ft |
CBBB engine | 14.75 lbf⋅ft |
High-pressure pump | 11.06 lbf⋅ft |
First stage | 14.75 lbf⋅ft |
Use new screw. | |
Second stage | 45° |
First stage | 14.75 lbf⋅ft |
Replace screws. | |
Second stage | 180° |
High-pressure pump | 11.06 lbf⋅ft |
High-pressure pump | 7.38 lbf⋅ft |
Pressure tube connection | 22.13 lbf⋅ft |
M10 | 16.23 lbf⋅ft |
M6 | 5.9 lbf⋅ft |
CBAA engine | 6.64 lbf⋅ft |
All Audi diesel straight-4 1.9 L BKC engines | 5.9 lbf⋅ft |
M10 | 16.23 lbf⋅ft |
M6 | 5.9 lbf⋅ft |
CBAB engine | 6.64 lbf⋅ft |
All Audi diesel straight-4 1.9 L BLS engines | 5.9 lbf⋅ft |
M10 | 16.23 lbf⋅ft |
M6 | 5.9 lbf⋅ft |
CBBB engine | 6.64 lbf⋅ft |
All Audi diesel straight-4 1.9 L BXE engines | 5.9 lbf⋅ft |
All Audi gasoline straight-4 1.4 L CAXC engines | 5.16 lbf⋅ft |
All Audi gasoline straight-4 1.4 L CMSA engines | 5.16 lbf⋅ft |
All other modifications | 7.38 lbf⋅ft |
At the turbocharger | 14.75 lbf⋅ft |
On the engine block | 29.5 lbf⋅ft |
At the turbocharger | 14.75 lbf⋅ft |
On the engine block | 29.5 lbf⋅ft |
At the turbocharger | 14.75 lbf⋅ft |
On the engine block | 44.25 lbf⋅ft |
Use new seal and screws. |
At the turbocharger | 14.75 lbf⋅ft |
On the engine block | 29.5 lbf⋅ft |
All Audi gasoline straight-4 1.4 L CAXC engines | 8.11 lbf⋅ft |
Replace sealing rings. | |
All Audi gasoline straight-4 1.2 L CBZB engines | 6.64 lbf⋅ft |
Replace sealing rings. | |
All Audi gasoline straight-4 1.4 L CMSA engines | 8.11 lbf⋅ft |
Replace sealing rings. |
All Audi gasoline straight-4 1.4 L CAXC engines | 8.11 lbf⋅ft |
Replace sealing rings. | |
All Audi gasoline straight-4 1.2 L CBZB engines | 6.64 lbf⋅ft |
Replace sealing rings. | |
All Audi gasoline straight-4 1.4 L CMSA engines | 8.11 lbf⋅ft |
Replace sealing rings. |
Banjo screws | 22.13 lbf⋅ft |
Replace sealing rings. |
Support | 7.38 lbf⋅ft |
Union nuts | 16.23 lbf⋅ft |
Support | 7.38 lbf⋅ft |
Union nuts | 16.23 lbf⋅ft |
Support | 7.38 lbf⋅ft |
Support | 6.64 lbf⋅ft |
Banjo screws | 22.13 lbf⋅ft |
Replace sealing rings. |
Union nuts | 16.23 lbf⋅ft |
First stage | Tighten by hand |
Second stage | 16.23 lbf⋅ft |
At the turbocharger | 5.9 lbf⋅ft |
Replace sealing rings. | |
On the engine block | 22.13 lbf⋅ft |
Replace sealing rings. | |
On timing case cover | 14.75 lbf⋅ft |
Replace sealing rings. |
At the turbocharger | 12.54 lbf⋅ft |
Use new seal and screws. | |
On the engine block | 22.13 lbf⋅ft |
Replace sealing rings. |
At the turbocharger | 6.64 lbf⋅ft |
Replace sealing rings. | |
On oil filter housing | 22.13 lbf⋅ft |
Replace sealing rings. |
At the turbocharger | 12.54 lbf⋅ft |
Replace sealing rings. |
Union nuts | 22.13 lbf⋅ft |
At the turbocharger | 11.06 lbf⋅ft |
Replace sealing rings. |
Support | 14.75 lbf⋅ft |
Banjo screws | 44.25 lbf⋅ft |
Use new seal and screws. |
At the turbocharger | 12.54 lbf⋅ft |
Use new seal and screws. |
Support | 14.75 lbf⋅ft |
Banjo screws | 44.25 lbf⋅ft |
Use new seal and screws. |
At the turbocharger | 12.54 lbf⋅ft |
Replace sealing rings. |
Union nuts | 22.13 lbf⋅ft |
At the turbocharger | 11.06 lbf⋅ft |
Replace sealing rings. |
Support | 18.44 lbf⋅ft |
Banjo screws | 44.25 lbf⋅ft |
Replace sealing rings. |
At the turbocharger | 11.06 lbf⋅ft |
On the engine block | 44.25 lbf⋅ft |
Use new seal and screws. |
All Audi gasoline straight-4 1.4 L CAXC engines | 5.9 lbf⋅ft |
Replace sealing rings. |
On the engine block | 44.25 lbf⋅ft |
Use new seal and screws. |
All Audi gasoline straight-4 1.2 L CBZB engines | 6.64 lbf⋅ft |
Replace sealing rings. | |
All Audi gasoline straight-4 1.4 L CMSA engines | 5.9 lbf⋅ft |
Replace sealing rings. |
At the turbocharger | 12.54 lbf⋅ft |
Replace sealing rings. |
Union nuts | 22.13 lbf⋅ft |
At the turbocharger | 11.06 lbf⋅ft |
Replace sealing rings. |
Support | 14.75 lbf⋅ft |
Banjo screws | 44.25 lbf⋅ft |
Use new seal and screws. |
At the turbocharger | 12.54 lbf⋅ft |
Use new seal and screws. |
Support | 14.75 lbf⋅ft |
Banjo screws | 44.25 lbf⋅ft |
Use new seal and screws. |
Engine with belt control | 11.06 lbf⋅ft |
Engine with chain drive | 6.64 lbf⋅ft |
All Audi gasoline straight-4 1.8 L BYT engines | 6.64 lbf⋅ft |
Tighten cross-wise. | |
All Audi gasoline straight-4 1.8 L BZB engines | 6.64 lbf⋅ft |
Tighten cross-wise. | |
All Audi gasoline straight-4 1.4 L CAXC engines | 6.64 lbf⋅ft |
All Audi gasoline straight-4 1.2 L CBZB engines | 6.64 lbf⋅ft |
All Audi gasoline straight-4 1.8 L CDAA engines | 6.64 lbf⋅ft |
Tighten cross-wise. | |
All Audi gasoline straight-4 1.4 L CMSA engines | 6.64 lbf⋅ft |
All other modifications | 11.06 lbf⋅ft |
Coolant pump pulley | 14.75 lbf⋅ft |
All Audi diesel straight-4 2.0 L AZV engines | 3.69 lbf⋅ft |
All Audi diesel straight-4 1.9 L BKC engines | 3.69 lbf⋅ft |
All Audi diesel straight-4 2.0 L BKD engines | 3.69 lbf⋅ft |
All Audi diesel straight-4 1.9 L BLS engines | 3.69 lbf⋅ft |
All Audi diesel straight-4 2.0 L BMN engines | 3.69 lbf⋅ft |
All Audi diesel straight-4 1.9 L BXE engines | 3.69 lbf⋅ft |
All Audi diesel straight-4 2.0 L CBAA engines | 3.69 lbf⋅ft |
All Audi diesel straight-4 2.0 L CBAB engines | 3.69 lbf⋅ft |
All Audi diesel straight-4 2.0 L CBBB engines | 3.69 lbf⋅ft |
All Audi diesel straight-4 2.0 L CFFA engines | 3.69 lbf⋅ft |
All Audi diesel straight-4 2.0 L CFFB engines | 3.69 lbf⋅ft |
All Audi diesel straight-4 2.0 L CFGB engines | 3.69 lbf⋅ft |
All Audi diesel straight-4 2.0 L CLJA engines | 3.69 lbf⋅ft |
All other modifications | 7.38 lbf⋅ft |
All other modifications | 3.69 lbf⋅ft |
First stage | 5.9 lbf⋅ft |
Tighten new screws in inside-to-outside order. | |
Second stage | 90° |
AZV engine | 14.75 lbf⋅ft |
Tighten crosswise from inside to outside. | |
CBAA engine | 7.38 lbf⋅ft |
Tighten crosswise from inside to outside. |
All Audi gasoline straight-4 1.6 L BGU engines | 16.96 lbf⋅ft |
tighten gradually cross-wise |
First stage | 5.9 lbf⋅ft |
Use new screws. | |
Second stage | 90° |
BKD engine | 14.75 lbf⋅ft |
Tighten crosswise from inside to outside. | |
CBAB engine | 7.38 lbf⋅ft |
Tighten crosswise from inside to outside. |
BMN engine | 14.75 lbf⋅ft |
Tighten crosswise from inside to outside. | |
CBBB engine | 7.38 lbf⋅ft |
Tighten crosswise from inside to outside. |
All Audi gasoline straight-4 1.6 L BSE engines | 16.96 lbf⋅ft |
tighten gradually cross-wise | |
All Audi gasoline straight-4 1.6 L BSF engines | 16.96 lbf⋅ft |
tighten gradually cross-wise |
First stage | Tighten by hand |
Second stage | 7.38 lbf⋅ft |
All Audi gasoline straight-4 1.2 L CBZB engines | 5.9 lbf⋅ft |
Tighten new screws crosswise in inside-to-outside order. |
First stage | 5.9 lbf⋅ft |
Tighten new screws in inside-to-outside order. | |
Second stage | 90° |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
Third stage | 90° |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
Third stage | 90° |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
Third stage | 90° |
First step | 5.9 lbf⋅ft |
Replace screws. | |
Second step | 90° |
First stage | 29.5 lbf⋅ft |
Use new screws. | |
Second stage | 44.25 lbf⋅ft |
Third stage | 90° |
Fourth stage | 90° |
First stage | 22.13 lbf⋅ft |
Use new screws. | |
Second stage | 36.88 lbf⋅ft |
Third stage | 90° |
Fourth stage | 90° |
First stage | 29.5 lbf⋅ft |
Use new screws. | |
Second stage | 90° |
Third stage | 90° |
First stage | 29.5 lbf⋅ft |
Use new screws. | |
Second stage | 44.25 lbf⋅ft |
Third stage | 90° |
Fourth stage | 90° |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 44.25 lbf⋅ft |
Third stage | 90° |
Fourth stage | 90° |
First stage | 22.13 lbf⋅ft |
Replace screws. | |
Second stage | 36.88 lbf⋅ft |
Third stage | 90° |
Fourth stage | 90° |
First stage | 29.5 lbf⋅ft |
Use new screws. | |
Second stage | 44.25 lbf⋅ft |
Third stage | 90° |
Fourth stage | 90° |
First stage | 22.13 lbf⋅ft |
Use new screws. | |
Second stage | 36.88 lbf⋅ft |
Third stage | 90° |
Fourth stage | 90° |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
Third stage | 90° |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
Third stage | 90° |
First step | 5.9 lbf⋅ft |
Replace screws. | |
Second step | 90° |
First stage | Tighten by hand |
Replace screws. | |
Second stage | 29.5 lbf⋅ft |
Third stage | 90° |
Fourth stage | 90° |
First stage | 22.13 lbf⋅ft |
Replace screws. | |
Second stage | 36.88 lbf⋅ft |
Third stage | 90° |
Fourth stage | 90° |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
Third stage | 90° |
AZV engine | 5.87 in |
CBAA engine | 5.39 in |
All Audi gasoline straight-4 1.6 L BGU engines | 4.53 in |
BKD engine | 5.87 in |
CBAB engine | 5.39 in |
BMN engine | 5.87 in |
CBBB engine | 5.39 in |
All Audi gasoline straight-4 1.6 L BSE engines | 4.53 in |
All Audi gasoline straight-4 1.6 L BSF engines | 4.53 in |
All Audi gasoline straight-4 1.4 L CAXC engines | 4.02 in |
All Audi gasoline straight-4 1.4 L CMSA engines | 4.02 in |
All other modifications | 6.54 in |
First stage | 14.75 lbf⋅ft |
Tighten new screws in inside-to-outside order. | |
Second stage | 90° |
First stage | 5.9 lbf⋅ft |
Tighten new screws in inside-to-outside order. | |
Second stage | 90° |
Engine with belt control | 7.38 lbf⋅ft |
AZV engine | 7.38 lbf⋅ft |
Tighten cross-wise. | |
CBAA engine | 6.64 lbf⋅ft |
Tighten cross-wise. |
BKD engine | 7.38 lbf⋅ft |
Tighten cross-wise. | |
CBAB engine | 6.64 lbf⋅ft |
Tighten cross-wise. |
BMN engine | 7.38 lbf⋅ft |
Tighten cross-wise. | |
CBBB engine | 6.64 lbf⋅ft |
Tighten cross-wise. |
First stage | 5.9 lbf⋅ft |
Tighten new screws in inside-to-outside order. | |
Second stage | 90° |
First stage | 7.38 lbf⋅ft |
Tighten new screws crosswise in inside-to-outside order. | |
Second stage | 90° |
First stage | 5.9 lbf⋅ft |
Tighten new screws crosswise in inside-to-outside order. | |
Second stage | 90° |
All other modifications | 7.38 lbf⋅ft |
Tighten the screws cross-wise from inside to outside. |
Valve play adjusting screw lock nuts | 22.13 lbf⋅ft |
First stage | 7.38 lbf⋅ft |
Use new screw. (left-hand thread) | |
Second stage | 90° |
On the engine block | 6.64 lbf⋅ft |
First stage | 22.13 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 33.19 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 22.13 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 22.13 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 110.63 lbf⋅ft |
Replace bolts. | |
Second stage | 180° |
First stage | 110.63 lbf⋅ft |
Use new screw. | |
Second stage | 180° |
First stage | 66.38 lbf⋅ft |
Use new screw. | |
Second stage | 90° |
First stage | 110.63 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 66.38 lbf⋅ft |
Use new screw. | |
Second stage | 90° |
First stage | 66.38 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 110.63 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 88.51 lbf⋅ft |
Use new screw. | |
Second stage | 90° |
First stage | 7.38 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 44.25 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
All Audi gasoline straight-4 1.6 L BGU engines | 7.38 lbf⋅ft |
All Audi gasoline straight-4 1.6 L BSE engines | 7.38 lbf⋅ft |
All Audi gasoline straight-4 1.6 L BSF engines | 7.38 lbf⋅ft |
All Audi gasoline straight-4 1.2 L CBZB engines | 22.13 lbf⋅ft |
First stage | 44.25 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
Flywheel cover | 7.38 lbf⋅ft |
First stage | 36.88 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 29.5 lbf⋅ft |
Use new screws. | |
Second stage | 90° |
First stage | 47.94 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 14.75 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 11.06 lbf⋅ft |
Tighten new screws in inside-to-outside order. | |
Second stage | 90° |
First stage | 47.94 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 47.94 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 14.75 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 47.94 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 47.94 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 14.75 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 14.75 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 7.38 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
Balance shaft timing chain guide rail | 14.75 lbf⋅ft |
Balance shaft timing chain tension rail | 14.75 lbf⋅ft |
All Audi diesel straight-4 1.9 L BKC engines | 7.38 lbf⋅ft |
Use screw-locking compound. | |
All Audi diesel straight-4 1.9 L BLS engines | 7.38 lbf⋅ft |
Use screw-locking compound. | |
All Audi diesel straight-4 1.9 L BXE engines | 7.38 lbf⋅ft |
Use screw-locking compound. |
First stage | 5.9 lbf⋅ft |
Replace screws. | |
Second stage | 45° |
First stage | 3.69 lbf⋅ft |
Replace screws. | |
Second stage | 30° |
First stage | 5.9 lbf⋅ft |
Use new screws and tighten them crosswise. | |
Second stage | 45° |
Engine with chain drive | 6.64 lbf⋅ft |
First stage | 14.75 lbf⋅ft |
Replace screws. | |
Second stage | 45° |
Cap | 6.64 lbf⋅ft |
Central screws | 25.81 lbf⋅ft |
Left-hand thread |
M6 | 6.64 lbf⋅ft |
First stage | 5.9 lbf⋅ft |
Use new screw. | |
Second stage | 90° |
First stage | 14.75 lbf⋅ft |
Use new screw. | |
Second stage | 90° |
Central screws | 25.81 lbf⋅ft |
Left-hand thread |
Cap | 6.64 lbf⋅ft |
First stage | 14.75 lbf⋅ft |
Replace screws. | |
Second stage | 45° |
First stage | 36.88 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
M8 | 14.75 lbf⋅ft |
1.9 TDI with diesel straight-4 1.9 L 103 HP at 4000 RPM, 250 N⋅m at 1900 RPM engine (2004.9–2010.5) | 16.23 lbf⋅ft |
1.9 TDI with diesel straight-4 1.9 L 103 HP at 4000 RPM, 250 N⋅m at 1900 RPM engine (2004.9–2010.5) | 16.23 lbf⋅ft |
1.9 TDI with diesel straight-4 1.9 L 103 HP engine (2004.9–2010.5) | 16.23 lbf⋅ft |
M10 | 29.5 lbf⋅ft |
M6 | 6.64 lbf⋅ft |
M8 | 18.44 lbf⋅ft |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 36.88 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
M8 | 14.75 lbf⋅ft |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 36.88 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
M8 | 14.75 lbf⋅ft |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 36.88 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
M8 | 14.75 lbf⋅ft |
Bottom | 25.81 lbf⋅ft |
Top | 18.44 lbf⋅ft |
M10 | 29.5 lbf⋅ft |
M8 | 18.44 lbf⋅ft |
Camshaft timing chain slip rail | 14.75 lbf⋅ft |
1.2 TSI with gasoline straight-4 1.2 L 103 HP engine (2010.4–2013.3) | 44.25 lbf⋅ft |
All other modifications | 7.38 lbf⋅ft |
Camshaft timing chain tensioning rail | 14.75 lbf⋅ft |
First stage | 36.88 lbf⋅ft |
Replace screws. | |
Second stage | 180° |
Central screws | 73.76 lbf⋅ft |
Wheel | 18.44 lbf⋅ft |
All Audi gasoline straight-4 1.6 L BGU engines | 73.76 lbf⋅ft |
Central screws | 73.76 lbf⋅ft |
Wheel | 18.44 lbf⋅ft |
Central screws | 73.76 lbf⋅ft |
Wheel | 18.44 lbf⋅ft |
Central screws | 73.76 lbf⋅ft |
Wheel | 18.44 lbf⋅ft |
All Audi gasoline straight-4 1.6 L BSE engines | 73.76 lbf⋅ft |
All Audi gasoline straight-4 1.6 L BSF engines | 73.76 lbf⋅ft |
Central screws | 73.76 lbf⋅ft |
Wheel | 18.44 lbf⋅ft |
First stage | 36.88 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 36.88 lbf⋅ft |
Replace screws. | |
Second stage | 180° |
Central part of control unit housing | 7.38 lbf⋅ft |
Use screw-locking compound. |
All Audi gasoline straight-4 1.4 L CAXC engines | 6.64 lbf⋅ft |
All Audi gasoline straight-4 1.4 L CMSA engines | 6.64 lbf⋅ft |
All other modifications | 11.06 lbf⋅ft |
Control drive chain tensioner | 7.38 lbf⋅ft |
Control drive chain tensioning rail | 14.75 lbf⋅ft |
Control drive timing chain slip rail | 14.75 lbf⋅ft |
Drive chain balance shaft tensioner | 62.69 lbf⋅ft |
Central screws | 73.76 lbf⋅ft |
Wheel | 18.44 lbf⋅ft |
Central screws | 73.76 lbf⋅ft |
Wheel | 18.44 lbf⋅ft |
Central screws | 73.76 lbf⋅ft |
Wheel | 18.44 lbf⋅ft |
First stage | 29.5 lbf⋅ft |
Use new screw. (left-hand thread) | |
Second stage | 90° |
First stage | 7.38 lbf⋅ft |
Replace the screws and sprocket wheel. | |
Second stage | for freedom from play |
First step | 22.13 lbf⋅ft |
Second step | 90° |
1.4 TFSI with gasoline straight-4 1.4 L 123 HP at 5000 RPM, 200 N⋅m at 1500 RPM engine (2007.9–2013.3) | 5.9 lbf⋅ft |
1.4 TFSI with gasoline straight-4 1.4 L 123 HP at 5000 RPM, 200 N⋅m at 1500 RPM engine (2007.9–2013.3) | 5.9 lbf⋅ft |
1.8 TFSI with gasoline straight-4 1.8 L 158 HP at 4500 RPM, 250 N⋅m at 1500 RPM engine (2006.11–2013.3) | 6.64 lbf⋅ft |
1.8 TFSI with gasoline straight-4 1.8 L 158 HP at 5000 RPM, 250 N⋅m at 1500 RPM engine (2006.11–2013.3) | 6.64 lbf⋅ft |
1.8 TFSI with gasoline straight-4 1.8 L 158 HP at 5000 RPM, 250 N⋅m at 1500 RPM engine (2006.11–2013.3) | 6.64 lbf⋅ft |
Engine with belt control | 11.06 lbf⋅ft |
Engine with chain drive | 6.64 lbf⋅ft |
All other modifications | 11.8 lbf⋅ft |
do not dismantle |
Central screws | 73.76 lbf⋅ft |
Wheel | 18.44 lbf⋅ft |
Central screws | 73.76 lbf⋅ft |
Wheel | 18.44 lbf⋅ft |
Central screws | 73.76 lbf⋅ft |
Wheel | 18.44 lbf⋅ft |
First stage | 36.88 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 5.9 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 14.75 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
Tension rail bearing screws | 14.75 lbf⋅ft |
All Audi diesel straight-4 1.9 L BKC engines | 7.38 lbf⋅ft |
Use screw-locking compound. | |
All Audi diesel straight-4 1.9 L BLS engines | 7.38 lbf⋅ft |
Use screw-locking compound. | |
All Audi diesel straight-4 1.9 L BXE engines | 7.38 lbf⋅ft |
Use screw-locking compound. |
M10 | 36.88 lbf⋅ft |
M6 | 7.38 lbf⋅ft |
Tighten cross-wise. |
Bottom | 7.38 lbf⋅ft |
Use new screw. | |
Center | 7.38 lbf⋅ft |
Use new screw. | |
Top | 7.38 lbf⋅ft |
Use new screws. |
Toothed belt guard at the bottom | 7.38 lbf⋅ft |
Use screw-locking compound. |
2.0 (2006.6–2013.3) | 7.38 lbf⋅ft |
Use screw-locking compound. |
Toothed belt guard center | 7.38 lbf⋅ft |
Use screw-locking compound. |
1.6 with gasoline straight-4 1.6 L 101 HP at 5600 RPM, 148 N⋅m at 3800 RPM engine (2004.9–2013.3) | 16.96 lbf⋅ft |
1.6 with gasoline straight-4 1.6 L 101 HP engine (2004.9–2013.3) | 16.96 lbf⋅ft |
1.6 with gasoline straight-4 1.6 L 101 HP engine (2004.9–2013.3) | 16.96 lbf⋅ft |
2.0 (2006.6–2013.3) | 18.44 lbf⋅ft |
Engine with belt control | 18.44 lbf⋅ft |
First stage | 14.75 lbf⋅ft |
Second stage | 45° |
First stage | 3.69 lbf⋅ft |
Replace screws. | |
Second stage | 5.9 lbf⋅ft |
All other modifications | 7.38 lbf⋅ft |
All Audi diesel straight-4 2.0 L AZV engines | 18.44 lbf⋅ft |
All Audi gasoline straight-4 1.6 L BGU engines | 18.44 lbf⋅ft |
All Audi diesel straight-4 1.9 L BKC engines | 18.44 lbf⋅ft |
Heat-exchanger on oil filter housing | 18.44 lbf⋅ft |
All Audi diesel straight-4 1.9 L BLS engines | 18.44 lbf⋅ft |
Heat-exchanger on oil filter housing | 18.44 lbf⋅ft |
All Audi gasoline straight-4 1.6 L BSE engines | 18.44 lbf⋅ft |
All Audi gasoline straight-4 1.6 L BSF engines | 18.44 lbf⋅ft |
All Audi diesel straight-4 1.9 L BXE engines | 18.44 lbf⋅ft |
All Audi gasoline straight-4 1.8 L BYT engines | 5.9 lbf⋅ft |
All Audi gasoline straight-4 1.8 L BZB engines | 5.9 lbf⋅ft |
All Audi gasoline straight-4 1.4 L CAXC engines | 5.9 lbf⋅ft |
All Audi diesel straight-4 1.6 L CAYB engines | 8.11 lbf⋅ft |
All Audi diesel straight-4 1.6 L CAYC engines | 8.11 lbf⋅ft |
All Audi diesel straight-4 2.0 L CBAA engines | 18.44 lbf⋅ft |
First stage | 5.9 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
All Audi gasoline straight-4 1.8 L CDAA engines | 5.9 lbf⋅ft |
All Audi diesel straight-4 2.0 L CFFA engines | 18.44 lbf⋅ft |
All Audi gasoline straight-4 1.4 L CMSA engines | 5.9 lbf⋅ft |
All other modifications | 11.06 lbf⋅ft |
All Audi gasoline straight-4 1.4 L CAXC engines | 5.9 lbf⋅ft |
All Audi gasoline straight-4 1.4 L CMSA engines | 5.9 lbf⋅ft |
Oil drain plug | 22.13 lbf⋅ft |
Replace screws and sealing rings. |
All Audi gasoline straight-4 1.8 L BYT engines | 16.23 lbf⋅ft |
All Audi gasoline straight-4 1.8 L BZB engines | 16.23 lbf⋅ft |
All Audi gasoline straight-4 1.8 L CDAA engines | 16.23 lbf⋅ft |
On the engine block | 18.44 lbf⋅ft |
Oil filter cover | 18.44 lbf⋅ft |
Oil filter cover | 18.44 lbf⋅ft |
First stage | 10.33 lbf⋅ft |
Tighten alternately starting from the top left | |
Second stage | 180° |
First stage | 10.33 lbf⋅ft |
Use new screws. | |
Second stage | 90° |
Tighten cross-wise. | |
Cap | 18.44 lbf⋅ft |
Oil filter cover | 18.44 lbf⋅ft |
On the engine block | 16.23 lbf⋅ft |
Cap | 18.44 lbf⋅ft |
First stage | 10.33 lbf⋅ft |
Tighten cross-wise. | |
Second stage | 90° |
First stage | 11.06 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 10.33 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 11.06 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
Oil filter cover | 18.44 lbf⋅ft |
First stage | 10.33 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 11.06 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
Oil filter cover | 18.44 lbf⋅ft |
Banjo screws | 22.13 lbf⋅ft |
M6 | 5.9 lbf⋅ft |
Oil pressure sensor | 14.75 lbf⋅ft |
AZV engine | 11.8 lbf⋅ft |
BMN engine | 11.8 lbf⋅ft |
First stage | 10.33 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 14.75 lbf⋅ft |
Use new screw. | |
Second stage | 90° |
First stage | 5.9 lbf⋅ft |
Second stage | 45° |
First stage | 5.9 lbf⋅ft |
Second stage | 90° |
First stage | 3.69 lbf⋅ft |
Replace screws. |
First step | 7.38 lbf⋅ft |
Second step | 90° |
Second stage | 29.5 lbf⋅ft |
At the gearbox | 29.5 lbf⋅ft |
First stage | 3.69 lbf⋅ft |
Tighten cross-wise. | |
Second stage | 9.59 lbf⋅ft |
M10 | 33.19 lbf⋅ft |
M6 | 11.06 lbf⋅ft |
Tighten the screws in steps. |
First stage | 5.9 lbf⋅ft |
Replace screws. | |
Second stage | 45° |
First stage | 11.06 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
M10 | 29.5 lbf⋅ft |
At the gearbox | |
M6 | 11.06 lbf⋅ft |
Gradually tighten screws crosswise. |
M10 | 33.19 lbf⋅ft |
M7 | 11.06 lbf⋅ft |
Gradually tighten screws crosswise. |
Engine with belt control | 29.5 lbf⋅ft |
First stage | 5.9 lbf⋅ft |
Replace screws. | |
Second stage | 45° |
First stage | 11.06 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
Engine with belt control | 11.06 lbf⋅ft |
At the gearbox | 29.5 lbf⋅ft |
On the engine block | 11.06 lbf⋅ft |
Gradually tighten screws crosswise. |
Camshaft sensor | 7.38 lbf⋅ft |
Use screw-locking compound. |
AZV engine | 5.9 lbf⋅ft |
CBAA engine | 3.69 lbf⋅ft |
All Audi diesel straight-4 1.9 L BKC engines | 2.21 lbf⋅ft |
BKD engine | 5.9 lbf⋅ft |
CBAB engine | 3.69 lbf⋅ft |
All Audi diesel straight-4 1.9 L BLS engines | 2.21 lbf⋅ft |
BMN engine | 5.9 lbf⋅ft |
CBBB engine | 3.69 lbf⋅ft |
All Audi diesel straight-4 1.9 L BXE engines | 2.21 lbf⋅ft |
All other modifications | 3.69 lbf⋅ft |
All Audi gasoline straight-4 1.8 L BYT engines | 6.64 lbf⋅ft |
All Audi gasoline straight-4 1.8 L BZB engines | 6.64 lbf⋅ft |
All Audi gasoline straight-4 1.8 L CDAA engines | 6.64 lbf⋅ft |
All other modifications | 3.69 lbf⋅ft |
On exhaust manifold | 33.19 lbf⋅ft |
Use hot screw paste | |
On particle filter | 44.25 lbf⋅ft |
Use hot screw paste |
All other modifications | 33.19 lbf⋅ft |
Use hot screw paste |
AZV engine | 5.9–8.11 lbf⋅ft |
CBAA engine | 12.54 lbf⋅ft |
All Audi diesel straight-4 1.9 L BKC engines | 11.06 lbf⋅ft |
BKD engine | 5.9–8.11 lbf⋅ft |
CBAB engine | 12.54 lbf⋅ft |
All Audi diesel straight-4 1.9 L BLS engines | 11.06 lbf⋅ft |
BMN engine | 5.9–8.11 lbf⋅ft |
CBBB engine | 12.54 lbf⋅ft |
All Audi diesel straight-4 1.9 L BXE engines | 11.06 lbf⋅ft |
All Audi diesel straight-4 1.6 L CAYB engines | 12.54 lbf⋅ft |
All Audi diesel straight-4 1.6 L CAYC engines | 12.54 lbf⋅ft |
Knock sensor | 14.75 lbf⋅ft |
Lambda sensor | 40.57 lbf⋅ft |
Use hot screw paste |
All Audi gasoline straight-4 2.0 L AXX engines | 29.5 lbf⋅ft |
on the engine block |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 180° |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 180° |
First stage | Tighten by hand |
Replace screws. | |
Second stage | 29.5 lbf⋅ft |
on the engine block | |
Third stage | 180° |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
on the engine block |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 180° |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 180° |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 180° |
All Audi gasoline straight-4 2.0 L BPY engines | 29.5 lbf⋅ft |
on the engine block | |
All Audi gasoline straight-4 2.0 L BWA engines | 29.5 lbf⋅ft |
on the engine block |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 180° |
All Audi gasoline straight-4 2.0 L CAWB engines | 29.5 lbf⋅ft |
on the engine block |
First stage | 5.16 lbf⋅ft |
Replace screws. | |
Second stage | 29.5 lbf⋅ft |
Third stage | 180° |
All Audi gasoline straight-4 2.0 L CBFA engines | 29.5 lbf⋅ft |
on the engine block | |
All Audi gasoline straight-4 1.2 L CBZB engines | 36.88 lbf⋅ft |
All Audi gasoline straight-4 2.0 L CCZA engines | 29.5 lbf⋅ft |
on the engine block | |
All other modifications | 33.19 lbf⋅ft |
On chassis | 36.88 lbf⋅ft |
First stage | 44.25 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 14.75 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
On chassis | 36.88 lbf⋅ft |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 44.25 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 14.75 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
On chassis | 36.88 lbf⋅ft |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 44.25 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 14.75 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
On chassis | 36.88 lbf⋅ft |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 44.25 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 14.75 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 44.25 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 14.75 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 51.63 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 36.88 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 73.76 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 73.76 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 36.88 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 73.76 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 36.88 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 73.76 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 36.88 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 73.76 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 36.88 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 73.76 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 36.88 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 73.76 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 36.88 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
Screws | 18.44 lbf⋅ft |
Otherwise | 18.44 lbf⋅ft |
Replace seals and nuts. |
First stage | Screw in by hand |
Replace seals and nuts. | |
Second stage | 18.44 lbf⋅ft |
Screws | 18.44 lbf⋅ft |
All other modifications | 29.5 lbf⋅ft |
Replace the nuts and use fitting paste |
Catalytic converter bracket | 29.5 lbf⋅ft |
At the turbocharger | 5.16 lbf⋅ft |
Replace clamps. |
All Audi diesel straight-4 1.6 L CAYB engines | 33.19 lbf⋅ft |
All Audi diesel straight-4 1.6 L CAYC engines | 33.19 lbf⋅ft |
All other modifications | 29.5 lbf⋅ft |
Use hot screw paste |
First stage | Screw in manually up to stop. |
Tighten new nuts and screws crosswise from the inside to the outside. | |
Second stage | 13.28 lbf⋅ft |
Third stage | 8.85 lbf⋅ft |
Fourth stage | 8.85 lbf⋅ft |
First stage | Screw in manually up to stop. |
Tighten new nuts and screws crosswise from the inside to the outside. | |
Second stage | 11.8 lbf⋅ft |
Bottom | 22.13 lbf⋅ft |
First stage | 3.69 lbf⋅ft |
Replace nuts. | |
Second stage | 8.85 lbf⋅ft |
Tighten alternately from inside to outside. | |
Third stage | 11.8 lbf⋅ft |
Fourth stage | 18.44 lbf⋅ft |
BKD engine | 18.44 lbf⋅ft |
Replace nuts. | |
CBAB engine | 14.75 lbf⋅ft |
CFFB engine | 17.7 lbf⋅ft |
Replace nuts. |
AZV engine | 18.44 lbf⋅ft |
Replace screws. | |
CBAA engine | 14.75 lbf⋅ft |
CFFA engine | 17.7 lbf⋅ft |
Replace nuts. |
BMN engine | 18.44 lbf⋅ft |
Replace nuts. | |
CBBB engine | 14.75 lbf⋅ft |
Replace nuts. |
Bottom | 22.13 lbf⋅ft |
Replace nuts. | |
Top | 14.75 lbf⋅ft |
Replace nuts. |
All other modifications | 18.44 lbf⋅ft |
Replace nuts. |
AZV engine | 18.44 lbf⋅ft |
Replace nuts. | |
CBAA engine | 14.75 lbf⋅ft |
CFFA engine | 17.7 lbf⋅ft |
BKD engine | 18.44 lbf⋅ft |
Replace nuts. | |
CBAB engine | 14.75 lbf⋅ft |
CFFB engine | 17.7 lbf⋅ft |
CBBB engine | 14.75 lbf⋅ft |
All Audi gasoline straight-4 1.4 L CAXC engines | 7.38 lbf⋅ft |
All Audi gasoline straight-4 1.2 L CBZB engines | 5.9 lbf⋅ft |
All Audi gasoline straight-4 1.4 L CMSA engines | 7.38 lbf⋅ft |
All other modifications | 18.44 lbf⋅ft |
Replace nuts. |
1.2 TSI with gasoline straight-4 1.2 L 103 HP engine (2010.4–2013.3) | 18.44 lbf⋅ft |
Replace seals and nuts. | |
1.4 TFSI with gasoline straight-4 1.4 L 123 HP at 5000 RPM, 200 N⋅m at 1500 RPM engine (2007.9–2013.3) | 18.44 lbf⋅ft |
Replace nuts. | |
1.4 TFSI with gasoline straight-4 1.4 L 123 HP at 5000 RPM, 200 N⋅m at 1500 RPM engine (2007.9–2013.3) | 18.44 lbf⋅ft |
Replace nuts. | |
1.6 with gasoline straight-4 1.6 L 101 HP at 5600 RPM, 148 N⋅m at 3800 RPM engine (2004.9–2013.3) | 18.44 lbf⋅ft |
Replace nuts. | |
1.6 with gasoline straight-4 1.6 L 101 HP engine (2004.9–2013.3) | 18.44 lbf⋅ft |
Replace nuts. | |
1.6 with gasoline straight-4 1.6 L 101 HP engine (2004.9–2013.3) | 18.44 lbf⋅ft |
Replace nuts. | |
2.0 (2006.6–2013.3) | 18.44 lbf⋅ft |
Replace nuts. Use hot screw paste. | |
2.0 TFSI with gasoline straight-4 2.0 L 197 HP at 5000 RPM, 280 N⋅m at 1800 RPM engine (2004.9–2013.3) | 29.5 lbf⋅ft |
Replace nuts. | |
2.0 TFSI with gasoline straight-4 2.0 L 197 HP at 5100 RPM, 280 N⋅m at 1700 RPM engine (2004.9–2013.3) | 29.5 lbf⋅ft |
Replace nuts. | |
2.0 TFSI with gasoline straight-4 2.0 L 197 HP at 5100 RPM, 280 N⋅m at 1800 RPM engine (2004.9–2013.3) | 29.5 lbf⋅ft |
Replace nuts. | |
2.0 TFSI with gasoline straight-4 2.0 L 197 HP at 5100 RPM, 280 N⋅m at 1800 RPM engine (2004.9–2013.3) | 29.5 lbf⋅ft |
Replace nuts. | |
2.0 TFSI with gasoline straight-4 2.0 L 197 HP engine (2004.9–2013.3) | 29.5 lbf⋅ft |
Replace nuts. | |
2.0 TFSI with gasoline straight-4 2.0 L 197 HP, 280 N⋅m at 1800 RPM engine (2004.9–2013.3) | 29.5 lbf⋅ft |
Replace nuts. | |
All other modifications | 5.16 lbf⋅ft |
Strut | 29.5 lbf⋅ft |
Strut | 16.96 lbf⋅ft |
Otherwise | 16.96 lbf⋅ft |
M10 | 29.5 lbf⋅ft |
Strut | |
M8 | 16.96 lbf⋅ft |
Support |
Otherwise | 16.96 lbf⋅ft |
Strut | 29.5 lbf⋅ft |
Strut | 29.5 lbf⋅ft |
Strut | 16.96 lbf⋅ft |
Otherwise | 16.96 lbf⋅ft |
All other modifications | 18.44 lbf⋅ft |
Front | 18.44 lbf⋅ft |
Clamps | 16.96 lbf⋅ft |
Replace nuts. |
CBBB engine | 16.96 lbf⋅ft |
All other modifications | 16.96 lbf⋅ft |
All Audi diesel straight-4 2.0 L AZV engines | 6.64 lbf⋅ft |
Cap | 6.64 lbf⋅ft |
Nuts | 6.64 lbf⋅ft |
BKD engine | 6.64 lbf⋅ft |
Cap | 3.69 lbf⋅ft |
Otherwise | 7.38 lbf⋅ft |
All Audi diesel straight-4 2.0 L BMN engines | 6.64 lbf⋅ft |
Cap | 3.69 lbf⋅ft |
Otherwise | 7.38 lbf⋅ft |
All Audi diesel straight-4 2.0 L CBAA engines | 6.64 lbf⋅ft |
All Audi diesel straight-4 2.0 L CBBB engines | 6.64 lbf⋅ft |
All Audi diesel straight-4 2.0 L CFFA engines | 6.64 lbf⋅ft |
All Audi diesel straight-4 2.0 L CFGB engines | 6.64 lbf⋅ft |
All other modifications | 2.21 lbf⋅ft |
High-pressure side | 18.44 lbf⋅ft |
High-pressure side | 13.28 lbf⋅ft |
All Audi gasoline straight-4 1.2 L CBZB engines | 18.44 lbf⋅ft |
All other modifications | 22.13 lbf⋅ft |
1.8 TFSI with gasoline straight-4 1.8 L 158 HP at 4500 RPM, 250 N⋅m at 1500 RPM engine (2006.11–2013.3) | 29.5 lbf⋅ft |
1.8 TFSI with gasoline straight-4 1.8 L 158 HP at 5000 RPM, 250 N⋅m at 1500 RPM engine (2006.11–2013.3) | 29.5 lbf⋅ft |
1.8 TFSI with gasoline straight-4 1.8 L 158 HP at 5000 RPM, 250 N⋅m at 1500 RPM engine (2006.11–2013.3) | 29.5 lbf⋅ft |
All other modifications | 59 lbf⋅ft |
Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2010 Audi A3 Sportback user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.
Before doing any DIY service please check your insurance policy and Audi warranty policy for your region. In some regions DIY service may invalidate your warranty.
Table of Contents
- Air Conditioning Compressor Oil Capacity
- Air Conditioning Refrigerant Capacity
- Automatic Transmission Fluid Capacity
- Brake Fluid Capacity
- Cooling Fluid Capacity
- Engine Oil Capacity
- Fluid and Lubricant Specifications
- Manual Transmission Oil Capacity
- Brake System Specifications
- Chassis Specifications
- Cooling System Specifications
- Drive Belts Specifications
- Electrical System Specifications
- Emission
Conquer your fears and never give up!
DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Audi A3 Sportback service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.
Doing basic service for your 2010 Audi A3 Sportback you're not only saving money, but also also improving your technical skills and learning something new.
Audi A3 Sportback First generation facelift model years
logo_audi 2008logo_audi 2009-
logo_audi 2010 logo_audi 2011logo_audi 2012logo_audi 2013