in your garage to make future searches easy.

Condition Value
expand_moreRear axle brake
Brake anchor plate 8.85 lbf⋅ft
expand_moreParking brake servomotor
All Audi gasoline straight-4 1.8 L CJSB engines 5.9 lbf⋅ft
Use new seal and screws.
All Audi diesel straight-4 2.0 L CRBC engines 5.9 lbf⋅ft
All Audi diesel straight-4 2.0 L CRLB engines 5.9 lbf⋅ft
All Audi diesel straight-4 2.0 L CUNA engines 5.9 lbf⋅ft
Rear axle bleeder valve 7.38 lbf⋅ft
Rear axle brake caliper 25.81 lbf⋅ft
Replace screws.
expand_moreRear axle brake caliper mounting support
First stage 66.38 lbf⋅ft
Replace screws.
Second stage 90°
Rear axle brake disc 2.95 lbf⋅ft
Replace screws.
expand_moreRear axle brake hose
1.8 TFSI quattro with gasoline straight-4 1.8 L 177 HP engine (2013.5–) 25.81 lbf⋅ft
Replace sealing rings.
Rear axle wheel speed sensor 5.9 lbf⋅ft
expand_moreRear axle steering
expand_moreRear axle track rod
expand_moreAt the axle support
First stage 51.63 lbf⋅ft
Replace screws and nuts.
Second stage 180°
expand_moreOn stub axle
First stage 51.63 lbf⋅ft
Replace screws.
Second stage 180°
expand_moreRear axle suspension
expand_moreRear axle shock absorber
expand_moreOn chassis
First stage 36.88 lbf⋅ft
Replace screws.
Second stage 45°
expand_moreOn rear axle
First stage 51.63 lbf⋅ft
Replace screws and nuts.
Second stage 180°
Rear axle shock absorber piston rod 18.44 lbf⋅ft
Replace nuts.
expand_moreRear axle wheel suspension
expand_moreCombined steering axle
expand_moreAt the bearing pedestal
First stage 51.63 lbf⋅ft
Replace screws.
Second stage 360°
expand_moreOn chassis
First stage 36.88 lbf⋅ft
Replace screws.
Second stage 45°
expand_moreRear axle carrier
expand_moreOn chassis (M10)
First stage 36.88 lbf⋅ft
Replace screws.
Second stage 45°
expand_moreOn chassis (M12)
First stage 51.63 lbf⋅ft
Replace screws.
Second stage 180°
expand_moreRear axle drive shaft
expand_moreAt the differential
First stage 7.38 lbf⋅ft
Replace screws.
expand_moreSecond stage
M10 51.63 lbf⋅ft
M8 29.5 lbf⋅ft
expand_moreCentral screws
First stage 147.51 lbf⋅ft
Replace screws.
Second stage 180°
expand_moreRear axle longitudinal control arm
expand_moreAt the bearing pedestal
First stage 66.38 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreOn stub axle
First stage 51.63 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreRear axle stabilizer mounting
expand_moreAt the axle support
First stage 14.75 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreRear axle stabilizer support at the axle control arm
First stage 14.75 lbf⋅ft
Replace screws and nuts.
Second stage 180°
Rear axle stabilizer support at the stabilizer 40.57 lbf⋅ft
expand_moreSteering knuckle
expand_moreWith composite rear axle
First stage 22.13 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreTrack control arm lower
At the axle support 70.07 lbf⋅ft
Replace nuts.
expand_moreOn stub axle
First stage 51.63 lbf⋅ft
Replace screws and nuts.
Second stage 180°
expand_moreTrack control arm upper
At the axle support 70.07 lbf⋅ft
Replace nuts.
expand_moreOn stub axle
First stage 95.88 lbf⋅ft
Replace screws and nuts.
Second stage 180°
expand_moreWheel hub wheel bearing
expand_moreWheel bearing unit
First stage 59 lbf⋅ft
Replace screws.
Second stage 90°
expand_moreWheels and tires
expand_moreTire pressure sensors
Torx screws 2.95 lbf⋅ft
Union nuts 5.9 lbf⋅ft
Wheel attachment 88.51 lbf⋅ft

Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2013 Audi A3 Sportback Quattro user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.

Before doing any DIY service please check your insurance policy and Audi warranty policy for your region. In some regions DIY service may invalidate your warranty.

Conquer your fears and never give up!

DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Audi A3 Sportback Quattro service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.

Doing basic service for your 2013 Audi A3 Sportback Quattro you're not only saving money, but also also improving your technical skills and learning something new.

2013 Audi A3 Sportback Quattro generations

In 2013 Audi offered 2 generations of the A3 Sportback Quattro. Rear suspension fastener tightening specifications may vary in different generations. Be sure that you are looking at the rigt modification.

Audi A3 Sportback Quattro Second generation model years

Units:
facebook twitter reddit linkedin messenger whatsapp telegram skype email chat