2013 Audi A3 Sedan First generation Engine Fastener Tightening Specifications
in your garage to make future searches easy.
Condition | Value |
---|
All Audi gasoline straight-4 1.8 L CJSA engines | 6.64 lbf⋅ft |
All Audi gasoline straight-4 1.8 L CJSB engines | 6.64 lbf⋅ft |
First stage | Screw in screw(s) by hand. |
Tighten screws from the inside outwards. | |
Second stage | 5.9 lbf⋅ft |
Replace sealing rings. |
All Audi gasoline straight-4 1.4 L CMBA engines | 5.9 lbf⋅ft |
All Audi gasoline straight-4 1.8 L CNSB engines | 6.64 lbf⋅ft |
First stage | Screw in screw(s) by hand. |
Second stage | 11.06 lbf⋅ft |
First stage | Screw in screw(s) by hand. |
Replace sealing rings. | |
Second stage | 14.75 lbf⋅ft |
All Audi gasoline straight-4 1.4 L CXSA engines | 5.9 lbf⋅ft |
All Audi gasoline straight-4 1.4 L CXSB engines | 5.9 lbf⋅ft |
All Audi gasoline straight-4 1.4 L CZCA engines | 5.9 lbf⋅ft |
First stage | Screw in screw(s) by hand. |
Replace sealing rings. | |
Second stage | 14.75 lbf⋅ft |
Third stage | 90° |
On intake manifold | 7.38 lbf⋅ft |
On the engine block | 14.75 lbf⋅ft |
First stage | Screw in screw manually up to stop. |
Second stage | 14.75 lbf⋅ft |
First stage | screw in manually up to stop |
Second stage | 14.75 lbf⋅ft |
All Audi gasoline straight-4 1.2 L CJZA engines | 16.96 lbf⋅ft |
All Audi gasoline straight-4 1.4 L CMBA engines | 16.96 lbf⋅ft |
First stage | 5.9 lbf⋅ft |
Second stage | 45° |
First stage | 14.75 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
All Audi gasoline straight-4 1.4 L CXSA engines | 16.96 lbf⋅ft |
All Audi gasoline straight-4 1.4 L CXSB engines | 16.96 lbf⋅ft |
All Audi gasoline straight-4 1.4 L CZCA engines | 16.96 lbf⋅ft |
First stage | 14.75 lbf⋅ft |
Replace bolts. | |
Second stage | 90° |
First stage | 5.9 lbf⋅ft |
Replace bolts. | |
Second stage | 180° |
Conventional screws | 18.44 lbf⋅ft |
First stage | 5.9 lbf⋅ft |
Aluminium screws | |
Second stage | 180° |
Aluminium screws | |
Conventional screws | 18.44 lbf⋅ft |
All Audi gasoline straight-4 1.4 L CMBA engines | 18.44 lbf⋅ft |
First stage | 5.9 lbf⋅ft |
Use new screw. | |
Second stage | 180° |
Steel screws | 18.44 lbf⋅ft |
All Audi gasoline straight-4 1.4 L CPTA engines | 18.44 lbf⋅ft |
All Audi gasoline straight-4 1.4 L CXSA engines | 18.44 lbf⋅ft |
All Audi gasoline straight-4 1.4 L CXSB engines | 18.44 lbf⋅ft |
All Audi gasoline straight-4 1.4 L CZCA engines | 18.44 lbf⋅ft |
First stage | 5.9 lbf⋅ft |
Second stage | 180° |
Conventional screws | 18.44 lbf⋅ft |
First stage | 14.75 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
All Audi gasoline straight-4 1.2 L CJZA engines | 16.23 lbf⋅ft |
Replace sealing rings. |
M6 | 7.38 lbf⋅ft |
M8 | 18.44 lbf⋅ft |
All other modifications | 16.23 lbf⋅ft |
Alternator | 16.96 lbf⋅ft |
First stage | 14.75 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | Screw in screw manually up to stop. |
Second stage | 29.5 lbf⋅ft |
Third stage | 180° |
Third stage | 180° |
Fourth stage | 45° |
First stage | Screw in screw manually up to stop. |
Second stage | 29.5 lbf⋅ft |
Third stage | 180° |
Fourth stage | 45° |
Vacuum pump | 6.64 lbf⋅ft |
All Audi diesel straight-4 2.0 L CRFC engines | 14.75 lbf⋅ft |
Clamps | 5.16 lbf⋅ft |
Use only original gripper clamps. |
First stage | Screw in screw manually up to stop. |
Second stage | 14.75 lbf⋅ft |
All other modifications | 6.64 lbf⋅ft |
Replace sealing rings. |
On exhaust manifold | 14.75 lbf⋅ft |
Replace sealing rings. | |
Otherwise | 5.9 lbf⋅ft |
Replace sealing rings. |
All Audi gasoline straight-4 1.8 L CJSA engines | 6.64 lbf⋅ft |
All Audi gasoline straight-4 1.8 L CJSB engines | 6.64 lbf⋅ft |
All Audi gasoline straight-4 1.2 L CJZA engines | 6.64 lbf⋅ft |
Replace sealing rings. | |
All Audi gasoline straight-4 1.4 L CMBA engines | 6.64 lbf⋅ft |
All Audi gasoline straight-4 1.8 L CNSB engines | 6.64 lbf⋅ft |
All Audi gasoline straight-4 1.4 L CPTA engines | 6.64 lbf⋅ft |
Replace bolts. | |
All Audi gasoline straight-4 1.4 L CXSA engines | 6.64 lbf⋅ft |
All Audi gasoline straight-4 1.4 L CXSB engines | 6.64 lbf⋅ft |
All Audi gasoline straight-4 1.4 L CZCA engines | 6.64 lbf⋅ft |
All other modifications | 14.75 lbf⋅ft |
On fuel-distributing pipe | 14.75 lbf⋅ft |
On high-pressure pump | 14.75 lbf⋅ft |
On fuel-distributing pipe | 18.44 lbf⋅ft |
On high-pressure pump | 18.44 lbf⋅ft |
Oil thread. |
All Audi gasoline straight-4 1.4 L CMBA engines | 18.44 lbf⋅ft |
All Audi gasoline straight-4 1.8 L CNSB engines | 19.91 lbf⋅ft |
Oil thread. | |
All Audi diesel straight-4 2.0 L CRFC engines | 20.65 lbf⋅ft |
All Audi gasoline straight-4 1.4 L CXSA engines | 18.44 lbf⋅ft |
All Audi gasoline straight-4 1.4 L CXSB engines | 18.44 lbf⋅ft |
All Audi gasoline straight-4 1.4 L CZCA engines | 18.44 lbf⋅ft |
On high-pressure pump | 20.65 lbf⋅ft |
First stage | Screw in screw(s) by hand. |
Use new screws and snug them down crosswise. | |
Second stage | 5.9 lbf⋅ft |
Third stage | 90° |
First stage | Screw in screw(s) by hand. |
Replace sealing rings. | |
Second stage | 14.75 lbf⋅ft |
Third stage | 90° |
First stage | Tighten the screws alternately in several steps, until the bearing covers sit flush. |
Replace screws. | |
Second stage | 5.9 lbf⋅ft |
Third stage | 90° |
First stage | Screw in screw(s) by hand. |
Replace screws. | |
Second stage | 7.38 lbf⋅ft |
Tighten screws crosswise. | |
Third stage | 14.75 lbf⋅ft |
Fourth stage | 90° |
First stage | 14.75 lbf⋅ft |
Replace screws. | |
Second stage | 45° |
First stage | 14.75 lbf⋅ft |
Replace screws. | |
Second stage | 180° |
First stage | 14.75 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 14.75 lbf⋅ft |
Replace bolts. |
Second stage | 45° |
Third stage | 180° |
High-pressure pump pulley | 70.07 lbf⋅ft |
First stage | 6.64 lbf⋅ft |
Replace screws. | |
Second stage | 180° |
First stage | 1.48 lbf⋅ft |
Replace bolts. | |
Second stage | 7.38 lbf⋅ft |
Third stage | 180° |
All Audi gasoline straight-4 1.8 L CJSA engines | 29.5 lbf⋅ft |
Replace components. | |
All Audi gasoline straight-4 1.8 L CJSB engines | 29.5 lbf⋅ft |
Replace components. | |
All Audi gasoline straight-4 1.8 L CNSB engines | 29.5 lbf⋅ft |
All other modifications | 5.9 lbf⋅ft |
All Audi gasoline straight-4 1.8 L CJSA engines | 18.44 lbf⋅ft |
Replace nuts. | |
All Audi gasoline straight-4 1.8 L CJSB engines | 18.44 lbf⋅ft |
Replace nuts. | |
All Audi gasoline straight-4 1.8 L CNSB engines | 18.44 lbf⋅ft |
Replace nuts. |
At the cylinder head | 16.23 lbf⋅ft |
Tighten new nuts evenly in several steps. |
At the cylinder head | 18.44 lbf⋅ft |
All Audi gasoline straight-4 1.8 L CNSB engines | 22.13 lbf⋅ft |
All other modifications | 14.75 lbf⋅ft |
Turbocharger coolant feed line | 6.64 lbf⋅ft |
Replace sealing rings. | |
Turbocharger coolant return line | 6.64 lbf⋅ft |
Replace sealing rings. |
At the turbocharger | 6.64 lbf⋅ft |
Replace sealing rings. | |
On the engine block | 6.64 lbf⋅ft |
Replace sealing rings. |
At the turbocharger | 6.64 lbf⋅ft |
Replace sealing rings. | |
On the engine block | 6.64 lbf⋅ft |
Replace sealing rings. |
At the turbocharger | 16.23 lbf⋅ft |
On the engine block | 22.13 lbf⋅ft |
All Audi gasoline straight-4 1.8 L CNSB engines | 6.64 lbf⋅ft |
At the turbocharger | 16.23 lbf⋅ft |
On the engine block | 22.13 lbf⋅ft |
Replace sealing rings. |
On the engine block | 6.64 lbf⋅ft |
Replace sealing rings. |
At the turbocharger | 10.33 lbf⋅ft |
All Audi gasoline straight-4 1.8 L CNSB engines | 6.64 lbf⋅ft |
At the turbocharger | 10.33 lbf⋅ft |
Replace sealing rings. | |
On the engine block | 7.38 lbf⋅ft |
Replace sealing rings. |
All Audi gasoline straight-4 1.8 L CJSA engines | 6.64 lbf⋅ft |
Tighten screws crosswise. | |
All Audi gasoline straight-4 1.8 L CJSB engines | 6.64 lbf⋅ft |
Tighten screws crosswise. |
First stage | Screw in screw(s) by hand. |
Replace sealing rings. | |
Second stage | 5.16 lbf⋅ft |
Tighten the screws crosswise. |
All Audi gasoline straight-4 1.4 L CMBA engines | 8.85 lbf⋅ft |
All Audi gasoline straight-4 1.8 L CNSB engines | 6.64 lbf⋅ft |
Tighten screws crosswise. |
M6 × 60 screws | 8.85 lbf⋅ft |
M6 × 20 screws | 5.9 lbf⋅ft |
All Audi gasoline straight-4 1.4 L CXSA engines | 8.85 lbf⋅ft |
All Audi gasoline straight-4 1.4 L CXSB engines | 8.85 lbf⋅ft |
All Audi gasoline straight-4 1.4 L CZCA engines | 8.85 lbf⋅ft |
First stage | 14.75 lbf⋅ft |
Replace bolts. | |
Second stage | 45° |
First stage | 7.38 lbf⋅ft |
Use new screw. (left-hand thread) | |
Second stage | 90° |
First stage | 14.75 lbf⋅ft |
Replace bolts. | |
Second stage | 90° |
First stage | 14.75 lbf⋅ft |
Use new screw. | |
Second stage | 90° |
Fan wheel | 3.69 lbf⋅ft |
1.8 TFSI with gasoline straight-4 1.8 L 168 HP engine (2013.11–) | 3.69 lbf⋅ft |
First stage | 5.9 lbf⋅ft |
Tighten new screws in inside-to-outside order. | |
Second stage | 90° |
First stage | 7.38 lbf⋅ft |
Replace bolts. | |
Second stage | 180° |
First stage | Tighten bolt(s) until hand-tight. |
Note correct order of tensioning. | |
Second stage | 5.9 lbf⋅ft |
First stage | Tighten bolt(s) until hand-tight. |
Second stage | 5.9 lbf⋅ft |
Third stage | 90° |
Cap | 5.9 lbf⋅ft |
First stage | 7.38 lbf⋅ft |
Replace screws. | |
Second stage | 180° |
First stage | 7.38 lbf⋅ft |
Replace screws. | |
Second stage | 180° |
First stage | Screw in screw(s) by hand. |
Tighten nuts and screws crosswise in inside-to-outside order. | |
Second stage | 5.9 lbf⋅ft |
First stage | 29.5 lbf⋅ft |
Replace bolts. | |
Second stage | 90° |
Third stage | 90° |
Fourth stage | 2.95 lbf⋅ft |
Screw #11. | |
Fifth stage | 90° |
Screw #11. |
First stage | 29.5 lbf⋅ft |
Replace bolts. | |
Second stage | 90° |
Third stage | 90° |
Fourth stage | 90° |
First stage | 22.13 lbf⋅ft |
Replace screws. | |
Second stage | 47.94 lbf⋅ft |
Third stage | 90° |
Fourth stage | 90° |
First stage | 29.5 lbf⋅ft |
Use new screw. | |
Second stage | 90° |
Third stage | 90° |
Fourth stage | 2.95 lbf⋅ft |
Fifth stage | 90° |
First stage | 22.13 lbf⋅ft |
Replace bolts. | |
Second stage | 47.94 lbf⋅ft |
Third stage | 90° |
Fourth stage | 90° |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
Third stage | 90° |
Fourth stage | 90° |
First stage | Screw in screw(s) by hand. |
Replace bolts. | |
Second stage | 5.9 lbf⋅ft |
Third stage | 90° |
First stage | 7.38 lbf⋅ft |
Replace screws. | |
Second stage | 180° |
All other modifications | 6.64 lbf⋅ft |
Tighten gradually and alternately from inside to outside. |
First stage | 2.95 lbf⋅ft |
Replace screws. | |
Second stage | 45° |
First stage | 2.95 lbf⋅ft |
Replace screws. | |
Second stage | 45° |
First stage | 33.19 lbf⋅ft |
Replace bolts. | |
Second stage | 90° |
First stage | 22.13 lbf⋅ft |
Replace bolts. | |
Second stage | 90° |
Oil thread. |
First stage | 33.19 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 22.13 lbf⋅ft |
Replace bolts. | |
Second stage | 90° |
First stage | 22.13 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
All Audi gasoline straight-4 1.2 L CJZA engines | 6.64 lbf⋅ft |
Replace bolts. | |
All Audi gasoline straight-4 1.8 L CNSB engines | 6.64 lbf⋅ft |
All Audi gasoline straight-4 1.4 L CPTA engines | 5.9 lbf⋅ft |
Replace sealing rings. |
First stage | Screw in screw(s) by hand |
Tighten screws crosswise. | |
Second stage | 6.64 lbf⋅ft |
First stage | 110.63 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 88.51 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 110.63 lbf⋅ft |
Second stage | 90° |
First stage | 132.76 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
Third stage | 45° |
First stage | 110.63 lbf⋅ft |
Use new screw. | |
Second stage | 180° |
All other modifications | 22.13 lbf⋅ft |
First stage | 44.25 lbf⋅ft |
Use new screws and tighten them crosswise. | |
Second stage | 90° |
First stage | Screw in screw(s) by hand. |
Replace bolts. | |
Second stage | 14.75 lbf⋅ft |
Screws #1–#6. | |
Third stage | 47.94 lbf⋅ft |
Fourth stage | 90° |
First stage | 47.94 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | Tighten by hand |
Use new screws. |
Second stage | 47.94 lbf⋅ft |
Third stage | 90° |
Fourth stage | 14.75 lbf⋅ft |
Fifth stage | 90° |
First stage | 47.94 lbf⋅ft |
Replace bolts. | |
Second stage | 90° |
All other modifications | Component must not be knocked down. |
First stage | 7.38 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
Balance shaft timing chain guide rail | 14.75 lbf⋅ft |
Balance shaft timing chain tension rail | 14.75 lbf⋅ft |
First stage | 5.9 lbf⋅ft |
Replace screws. | |
Second stage | 45° |
First stage | 5.9 lbf⋅ft |
Gradually tighten screws crosswise. | |
Second stage | 45° |
First stage | 2.95 lbf⋅ft |
Replace screws. | |
Second stage | 180° |
First stage | 2.95 lbf⋅ft |
Replace screws. | |
Second stage | 45° |
First stage | 2.95 lbf⋅ft |
Replace screws. | |
Second stage | 45° |
Central screws | 25.81 lbf⋅ft |
Left-hand thread |
Central screws | 25.81 lbf⋅ft |
Left-hand thread |
First stage | 2.95 lbf⋅ft |
Second stage | 45° |
All Audi gasoline straight-4 1.4 L CPTA engines | 33.19 lbf⋅ft |
All other modifications | 14.75 lbf⋅ft |
Camshaft timing chain guide rail | 14.75 lbf⋅ft |
First stage | 2.95 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
Camshaft timing chain tensioning rail | 14.75 lbf⋅ft |
All Audi gasoline straight-4 1.8 L CJSA engines | 25.81 lbf⋅ft |
Left-hand thread | |
All Audi gasoline straight-4 1.8 L CJSB engines | 25.81 lbf⋅ft |
Left-hand thread | |
All Audi diesel straight-4 1.6 L CLHA engines | 73.76 lbf⋅ft |
Adjusting screws | 6.64 lbf⋅ft |
Central screws | 73.76 lbf⋅ft |
First stage | 2.95 lbf⋅ft |
Replace bolts. | |
Second stage | 90° |
First stage | 2.95 lbf⋅ft |
Second stage | 90° |
Control drive chain tensioning rail | 14.75 lbf⋅ft |
Control drive timing chain slip rail | 14.75 lbf⋅ft |
First stage | 2.95 lbf⋅ft |
Second stage | 45° |
Drive chain balance shaft tensioner | 62.69 lbf⋅ft |
Use screw-locking compound. |
First stage | 36.88 lbf⋅ft |
Use new screw. | |
Second stage | 135° |
Locking screws | 14.75 lbf⋅ft |
Replace sealing rings. |
First stage | 7.38 lbf⋅ft |
Replace screw and intermediate wheel when loosening the screw. | |
Second stage | for freedom from play |
Third stage | 18.44 lbf⋅ft |
Fourth stage | 90° |
Oil pump drive chain tensioner | 6.64 lbf⋅ft |
First stage | 5.9 lbf⋅ft |
Replace screws. | |
Second stage | 45° |
First stage | 36.88 lbf⋅ft |
Use new screw. | |
Second stage | 135° |
First stage | 36.88 lbf⋅ft |
Use new screw. | |
Second stage | 90° |
Coolant pump | 6.64 lbf⋅ft |
All Audi gasoline straight-4 1.2 L CJZA engines | 5.9 lbf⋅ft |
All Audi gasoline straight-4 1.4 L CMBA engines | 5.9 lbf⋅ft |
All Audi gasoline straight-4 1.4 L CPTA engines | 5.9 lbf⋅ft |
All Audi gasoline straight-4 1.4 L CXSA engines | 5.9 lbf⋅ft |
All Audi gasoline straight-4 1.4 L CXSB engines | 5.9 lbf⋅ft |
All Audi gasoline straight-4 1.4 L CZCA engines | 5.9 lbf⋅ft |
All other modifications | 8.85 lbf⋅ft |
All Audi gasoline straight-4 1.2 L CJZA engines | 5.9 lbf⋅ft |
All Audi gasoline straight-4 1.4 L CMBA engines | 5.9 lbf⋅ft |
All Audi gasoline straight-4 1.4 L CPTA engines | 5.9 lbf⋅ft |
All Audi gasoline straight-4 1.4 L CXSA engines | 5.9 lbf⋅ft |
All Audi gasoline straight-4 1.4 L CXSB engines | 5.9 lbf⋅ft |
All Audi gasoline straight-4 1.4 L CZCA engines | 5.9 lbf⋅ft |
All other modifications | 3.69 lbf⋅ft |
All Audi gasoline straight-4 1.2 L CJZA engines | 18.44 lbf⋅ft |
All Audi gasoline straight-4 1.4 L CMBA engines | 18.44 lbf⋅ft |
All Audi gasoline straight-4 1.4 L CPTA engines | 18.44 lbf⋅ft |
First stage | 14.75 lbf⋅ft |
Second stage | 45° |
All Audi gasoline straight-4 1.4 L CXSA engines | 18.44 lbf⋅ft |
All Audi gasoline straight-4 1.4 L CXSB engines | 18.44 lbf⋅ft |
All Audi gasoline straight-4 1.4 L CZCA engines | 18.44 lbf⋅ft |
First stage | 14.75 lbf⋅ft |
Replace nuts. | |
Second stage | 45° |
First stage | 2.95 lbf⋅ft |
Replace screws. | |
Second stage | 45° |
First stage | 2.95 lbf⋅ft |
Replace screws. | |
Second stage | 45° |
Otherwise | 6.64 lbf⋅ft |
All Audi gasoline straight-4 1.8 L CNSB engines | 6.64 lbf⋅ft |
Tighten screws crosswise. |
First stage | 5.9 lbf⋅ft |
Replace bolts. | |
Second stage | 45° |
First stage | 5.9 lbf⋅ft |
Replace bolts. | |
Second stage | 90° |
Replace sealing rings. |
All Audi diesel straight-4 1.6 L CLHA engines | Component must not be knocked down. |
First stage | 5.9 lbf⋅ft |
Replace screws. | |
Second stage | 45° |
First stage | 5.9 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
All Audi diesel straight-4 2.0 L CRBC engines | 29.5 lbf⋅ft |
Replace sealing rings. | |
All Audi diesel straight-4 2.0 L CRBD engines | 29.5 lbf⋅ft |
Replace sealing rings. | |
All Audi diesel straight-4 2.0 L CRFA engines | 29.5 lbf⋅ft |
Replace sealing rings. | |
All Audi diesel straight-4 2.0 L CRFC engines | 29.5 lbf⋅ft |
Replace sealing rings. | |
All Audi diesel straight-4 2.0 L CRLB engines | 29.5 lbf⋅ft |
Replace sealing rings. | |
All Audi diesel straight-4 2.0 L CRLC engines | 29.5 lbf⋅ft |
Replace sealing rings. | |
All Audi diesel straight-4 2.0 L CRUA engines | 29.5 lbf⋅ft |
Replace sealing rings. | |
All other modifications | 22.13 lbf⋅ft |
Use new screw. |
Oil filter cover | 18.44 lbf⋅ft |
Oil filter cover | 18.44 lbf⋅ft |
Slightly oil sealing lips. |
All other modifications | 14.75 lbf⋅ft |
Lubricate the seal with engine oil. |
First stage | Screw in screws by hand. |
Replace sealing rings. | |
Second stage | 14.75 lbf⋅ft |
Third stage | 90° |
Oil filter cover | 18.44 lbf⋅ft |
Replace sealing rings. | |
Oil filter drain plug | 3.69 lbf⋅ft |
Replace sealing rings. |
First stage | 14.75 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | Tighten by hand |
tighten gradually cross-wise | |
Second stage | 14.75 lbf⋅ft |
Third stage | 90° |
Oil filter cover | 18.44 lbf⋅ft |
Replace sealing rings. |
Oil filter cover | 3.69 lbf⋅ft |
Replace sealing rings. |
First stage | 14.75 lbf⋅ft |
Replace sealing rings. | |
Second stage | 90° |
Oil pressure sensor | 14.75 lbf⋅ft |
Replace sealing rings. |
First stage | 5.9 lbf⋅ft |
Second stage | 90° |
First stage | 5.9 lbf⋅ft |
Replace sealing rings. | |
Second stage | 90° |
Screw #1. | |
Third stage | 14.75 lbf⋅ft |
Screw #2. |
First stage | 8.85 lbf⋅ft |
Replace screws. | |
Second stage | 180° |
All Audi gasoline straight-4 1.4 L CMBA engines | 7.38 lbf⋅ft |
First stage | 5.9 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
All Audi gasoline straight-4 1.4 L CPTA engines | 7.38 lbf⋅ft |
All Audi gasoline straight-4 1.4 L CXSA engines | 7.38 lbf⋅ft |
All Audi gasoline straight-4 1.4 L CXSB engines | 7.38 lbf⋅ft |
All Audi gasoline straight-4 1.4 L CZCA engines | 7.38 lbf⋅ft |
First stage | 8.85 lbf⋅ft |
Replace bolts. | |
Second stage | 180° |
First stage | 5.9 lbf⋅ft |
Second stage | 45° |
First stage | 5.9 lbf⋅ft |
Second stage | 180° |
Screws #1–#2. | |
Third stage | 45° |
Screws #3–#9. | |
Fourth stage | 180° |
Screw #10. | |
Fifth stage | 90° |
Screws #11–#14. |
First stage | Screw in screw(s) by hand. |
Second stage | 8.85 lbf⋅ft |
Third stage | 29.5 lbf⋅ft |
At the gearbox | 29.5 lbf⋅ft |
On the engine block | 9.59 lbf⋅ft |
First stage | 5.9 lbf⋅ft |
Second stage | 180° |
Third stage | 45° |
Fourth stage | 180° |
Fifth stage | 90° |
First stage | 5.9 lbf⋅ft |
Second stage | 90° |
First stage | 5.9 lbf⋅ft |
Second stage | 45° |
Oil sump lower part | 8.85 lbf⋅ft |
Replace screws. |
First stage | 5.9 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 3.69 lbf⋅ft |
Tighten screws crosswise. | |
Third stage | 9.59 lbf⋅ft |
Tighten screws crosswise. |
Second stage | 29.5 lbf⋅ft |
Camshaft sensor | 6.64 lbf⋅ft |
Replace bolts. |
All Audi gasoline straight-4 1.8 L CJSA engines | 3.69 lbf⋅ft |
All Audi gasoline straight-4 1.8 L CJSB engines | 3.69 lbf⋅ft |
All Audi gasoline straight-4 1.8 L CNSB engines | 1.84 lbf⋅ft |
All other modifications | 6.64 lbf⋅ft |
All Audi gasoline straight-4 1.8 L CJSA engines | 7.38 lbf⋅ft |
Replace bolts. | |
All Audi gasoline straight-4 1.8 L CJSB engines | 7.38 lbf⋅ft |
Replace bolts. |
First stage | 2.95 lbf⋅ft |
Second stage | 45° |
All other modifications | 3.32 lbf⋅ft |
Replace sealing rings. |
All other modifications | 44.25 lbf⋅ft |
With combustion chamber pressure sensor | 8.85 lbf⋅ft |
Without combustion chamber pressure sensor | 12.54 lbf⋅ft |
First stage | 5.9 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
All other modifications | 14.75 lbf⋅ft |
Replace bolts. |
Lambda sensor | 40.57 lbf⋅ft |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 180° |
First stage | 5.16 lbf⋅ft |
Replace screws. | |
Second stage | 29.5 lbf⋅ft |
Third stage | 180° |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 5.16 lbf⋅ft |
Replace bolts. | |
Second stage | 29.5 lbf⋅ft |
Third stage | 90° |
First stage | 36.88 lbf⋅ft |
Replace bolts. | |
Second stage | 90° |
First stage | 44.25 lbf⋅ft |
Replace bolts. | |
Second stage | 90° |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 14.75 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 44.25 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 51.63 lbf⋅ft |
Replace bolts. | |
Second stage | 180° |
First stage | 14.75 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 95.88 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 36.88 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 36.88 lbf⋅ft |
Replace bolts. | |
Second stage | 90° |
Clamps | 11.06 lbf⋅ft |
Replace clamps. |
Clamps | 5.16 lbf⋅ft |
Clamps | 11.06 lbf⋅ft |
Nuts | 14.75 lbf⋅ft |
Screws | 14.75 lbf⋅ft |
At the subframe | 14.75 lbf⋅ft |
First stage | Screw in new screw(s) manually as far as it goes. |
Second stage | 14.75 lbf⋅ft |
At the subframe | 14.75 lbf⋅ft |
On the engine block | 14.75 lbf⋅ft |
On the engine block | 14.75 lbf⋅ft |
At the bracket | 14.75 lbf⋅ft |
First stage | Screw in screw manually up to stop. |
Second stage | 14.75 lbf⋅ft |
Differential pressure sensor lines | 33.19 lbf⋅ft |
First stage | 8.11 lbf⋅ft |
Replace nuts. | |
Second stage | 16.23 lbf⋅ft |
Tighten nuts and screws crosswise in inside-to-outside order. | |
Third stage | 16.23 lbf⋅ft |
Control tensioner |
First stage | 8.11 lbf⋅ft |
Tighten new nuts evenly in several steps. | |
Second stage | 16.23 lbf⋅ft |
Tighten nuts and screws crosswise in inside-to-outside order. | |
Third stage | 16.23 lbf⋅ft |
Control tensioner |
At the turbocharger | 6.64 lbf⋅ft |
Replace sealing rings. |
All Audi gasoline straight-4 1.2 L CJZA engines | 14.75 lbf⋅ft |
All Audi gasoline straight-4 1.4 L CMBA engines | 14.75 lbf⋅ft |
All Audi gasoline straight-4 1.8 L CNSB engines | 6.64 lbf⋅ft |
All Audi gasoline straight-4 1.4 L CPTA engines | 14.75 lbf⋅ft |
All Audi gasoline straight-4 1.4 L CXSA engines | 14.75 lbf⋅ft |
All Audi gasoline straight-4 1.4 L CXSB engines | 14.75 lbf⋅ft |
All Audi gasoline straight-4 1.4 L CZCA engines | 14.75 lbf⋅ft |
All other modifications | 11.06 lbf⋅ft |
All Audi gasoline straight-4 1.8 L CJSA engines | 14.75 lbf⋅ft |
All Audi gasoline straight-4 1.8 L CJSB engines | 14.75 lbf⋅ft |
On catalytic converter | 22.13 lbf⋅ft |
Clamps | 14.75 lbf⋅ft |
All other modifications | 22.13 lbf⋅ft |
Exhaust pipe bracket | 16.96 lbf⋅ft |
All Audi gasoline straight-4 1.8 L CJSA engines | 14.75 lbf⋅ft |
All Audi gasoline straight-4 1.8 L CJSB engines | 14.75 lbf⋅ft |
All other modifications | 22.13 lbf⋅ft |
On the engine block | 14.75 lbf⋅ft |
First stage | Screw in manually up to stop. |
Second stage | 14.75 lbf⋅ft |
Third stage | Screw in manually up to stop. |
Fourth stage | 29.5 lbf⋅ft |
Fuel filter bracket | 5.9 lbf⋅ft |
All other modifications | 3.69 lbf⋅ft |
Replace sealing rings. |
Preliminary feed pump | 81.13 lbf⋅ft |
Replace sealing rings. |
Preliminary feed pump | 81.13 lbf⋅ft |
Replace sealing rings. |
All Audi gasoline straight-4 1.4 L CPTA engines | 16.23 lbf⋅ft |
All other modifications | 22.13 lbf⋅ft |
M12 | 59 lbf⋅ft |
Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2013 Audi A3 Sedan user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.
Before doing any DIY service please check your insurance policy and Audi warranty policy for your region. In some regions DIY service may invalidate your warranty.
Table of Contents
- Air Conditioning Compressor Oil Capacity
- Air Conditioning Refrigerant Capacity
- Brake Fluid Capacity
- Cooling Fluid Capacity
- Engine Oil Capacity
- Fluid and Lubricant Specifications
- Manual Transmission Oil Capacity
- Brake System Specifications
- Chassis Specifications
- Cooling System Specifications
- Electrical System Specifications
- Emission
Conquer your fears and never give up!
DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Audi A3 Sedan service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.
Doing basic service for your 2013 Audi A3 Sedan you're not only saving money, but also also improving your technical skills and learning something new.