2020 Audi A3 S3 Sedan First generation facelift Chassis Specifications
in your garage to make future searches easy.
| Condition | Value |
|---|
| PR code 2UC | -0°47'+0°30'-0°30' |
| The maximum allowed difference between left and right is 0°30' | |
| PR code 2UC | -1°20'+0°30'-0°30' |
| The maximum allowed difference between left and right is 0°30' | |
| PR code 2UC | 7°49'+0°30'-0°30' |
| The maximum allowed difference between left and right is 0°30' | |
| Conditions for axle measurement | Vehicle ready for operation with spare wheel, tools, accessories and full tank. |
| 205/50 R 17 | 2.5 bar |
| Additionally observe tire inflation pressure in the operating instructions or on the sticker for tire inflation pressure (on the vehicle)! | |
| 225/40 R 18 | 2.6 bar |
| 235/35 R 19 | 2.6 bar |
| 205/50 R 17 | 2.6 bar |
| 225/40 R 18 | 2.8 bar |
| 235/35 R 19 | 2.8 bar |
| 205/50 R 17 | 2.2 bar |
| Additionally observe tire inflation pressure in the operating instructions or on the sticker for tire inflation pressure (on the vehicle)! | |
| 225/40 R 18 | 2.3 bar |
| 235/35 R 19 | 2.3 bar |
| 205/50 R 17 | 2.5 bar |
| 225/40 R 18 | 2.7 bar |
| 235/35 R 19 | 2.7 bar |
| Toe-in front (total toe) | 0°10'+0°10'-0°10' |
| PR code 2UC | 0°25'+0°10'-0°10' |
| All Audi gasoline straight-4 2.0 L CJXB engines | 5.1 ft |
| All Audi gasoline straight-4 2.0 L CJXC engines | 5.1 ft |
| All Audi gasoline straight-4 2.0 L CJXF engines | 5.04 ft |
| All Audi gasoline straight-4 2.0 L CJXB engines | 5.01 ft |
| All Audi gasoline straight-4 2.0 L CJXC engines | 5.01 ft |
| All Audi gasoline straight-4 2.0 L CJXF engines | 4.96 ft |
| 2-door variant | 8.51 ft |
| 4-door | 8.63 ft |
| All Audi gasoline straight-4 2.0 L CJXF engines | 8.52 ft |
| Wheel steering angle inner wheel (relative steering angle) | 20°00'+0°00'-0°00' |
| PR code 2UC | 18°20'+0°20'-0°20' |
Chassis specifications will help to do body work on your 2020 Audi A3 S3 Sedan.
Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2020 Audi A3 S3 Sedan user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.
Before doing any DIY service please check your insurance policy and Audi warranty policy for your region. In some regions DIY service may invalidate your warranty.
Table of Contents
- Air Conditioning Compressor Oil Capacity
- Air Conditioning Refrigerant Capacity
- All-wheel Drive Clutch Oil Capacity
- Brake Fluid Capacity
- Cooling Fluid Capacity
- Engine Oil Capacity
- Fluid and Lubricant Specifications
- Gearbox Oil Capacity
- Manual Transmission Oil Capacity
- Brake System Specifications
- Chassis Specifications
- Cooling System Specifications
- Electrical System Specifications
- Emission
Conquer your fears and never give up!
DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Audi A3 S3 Sedan service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.
Doing basic service for your 2020 Audi A3 S3 Sedan you're not only saving money, but also also improving your technical skills and learning something new.