2006 Audi A3 Quattro First generation facelift Front Suspension Fastener Tightening Specifications
in your garage to make future searches easy.
| Condition | Value |
|---|
| Bleed valve | 7.38 lbf⋅ft |
| At the brake caliper | 25.81 lbf⋅ft |
| At the brake line | 10.33 lbf⋅ft |
| Front axle brake caliper | 20.65 lbf⋅ft |
| FN3 brake calipers | 92.2 lbf⋅ft |
| Front axle brake disc | 2.95 lbf⋅ft |
| Wheel speed sensor | 5.9 lbf⋅ft |
| First stage | 14.75 lbf⋅ft |
| Use new screws. | |
| Second stage | 90° |
| All other modifications | 33.19 lbf⋅ft |
| Track rod end on track rod | 36.88 lbf⋅ft |
| Bottom | 81.13 lbf⋅ft |
| Replace bolts. | |
| Top | 44.25 lbf⋅ft |
| Replace bolts. | |
| Front axle | 44.25 lbf⋅ft |
| Replace nuts. | |
| First stage | 44.25 lbf⋅ft |
| Use new screws and nuts. | |
| Second stage | 90° |
| Top | 44.25 lbf⋅ft |
| Replace nuts. | |
| M10 | 51.63 lbf⋅ft |
| Gradually tighten screws crosswise. | |
| M8 | 29.5 lbf⋅ft |
| Gradually tighten screws crosswise. | |
| First step | 177.01 lbf⋅ft |
| Use new screw. | |
| Second step | 90° |
| Second stage | 90° detach. |
| First step | 177.01 lbf⋅ft |
| Second step | 90° |
| First stage | 140.14 lbf⋅ft |
| Replace nuts. | |
| Second stage | 90° |
| Stabiliser mounting at the stabiliser | 66.38 lbf⋅ft |
| Replace nuts. | |
| Support joint at the stub axle | 33.19 lbf⋅ft |
| Replace nuts. | |
| First stage | 14.75 lbf⋅ft |
| Replace screws. | |
| Second stage | 90° |
| First step | 177.01 lbf⋅ft |
| Use new screw. | |
| Second step | 90° |
| Third stage | 90° detach |
| First step | 177.01 lbf⋅ft |
| Second step | 90° |
| First stage | 140.14 lbf⋅ft |
| Replace nuts. | |
| Second stage | 90° |
| Wheel attachment | 88.51 lbf⋅ft |
Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2006 Audi A3 Quattro user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.
Before doing any DIY service please check your insurance policy and Audi warranty policy for your region. In some regions DIY service may invalidate your warranty.
Table of Contents
- Air Conditioning Compressor Oil Capacity
- Air Conditioning Refrigerant Capacity
- All-wheel Drive Clutch Oil Capacity
- Automatic Transmission Fluid Capacity
- Axle Oil Capacity
- Brake Fluid Capacity
- Cooling Fluid Capacity
- Diagnostic Values
- Engine Oil Capacity
- Fluid and Lubricant Specifications
- Manual Transmission Oil Capacity
- Steering Fluid Capacity
- Brake System Specifications
- Chassis Specifications
- Cooling System Specifications
- Drive Belts Specifications
- Electrical System Specifications
- Emission
- Engine Fastener Tightening Specifications
- Front Suspension Fastener Tightening Specifications
- Rear Suspension Fastener Tightening Specifications
- Transmission Fastener Tightening Specifications
Conquer your fears and never give up!
DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Audi A3 Quattro service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.
Doing basic service for your 2006 Audi A3 Quattro you're not only saving money, but also also improving your technical skills and learning something new.
2006 Audi A3 Quattro generations
In 2006 Audi offered 2 generations of the A3 Quattro. Front suspension fastener tightening specifications may vary in different generations. Be sure that you are looking at the rigt modification.