2003 Audi A2 First generation Transmission Fastener Tightening Specifications
in your garage to make future searches easy.
Condition | Value |
---|
Central nuts | 22.13 lbf⋅ft |
Replace nuts. |
M10 | 51.63 lbf⋅ft |
Tighten the new screws evenly in several steps. | |
M8 | 29.5 lbf⋅ft |
Tighten the new screws evenly in several steps. |
Central nuts | 88.51 lbf⋅ft |
Replace the speed nut with a double-hex nut. |
Clutch master cylinder | 20.65 lbf⋅ft |
Clutch pressure plate | 14.75 lbf⋅ft |
Gradually tighten screws crosswise. | |
Clutch slave cylinder | 18.44 lbf⋅ft |
Gearbox shift lever | 18.44 lbf⋅ft |
Replace nuts. | |
Selector cable linkage | 16.96 lbf⋅ft |
All Audi diesel straight-3 1.2 L ANY engines | 33.19 lbf⋅ft |
All Audi gasoline straight-4 1.4 L AUA engines | 33.19 lbf⋅ft |
All other modifications | 29.5 lbf⋅ft |
M12 | 59 lbf⋅ft |
02J gearbox | 22.13 lbf⋅ft |
02J gearbox | 18.44 lbf⋅ft |
Oil filler screws | 18.44 lbf⋅ft |
First stage | 36.88 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2003 Audi A2 user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.
Before doing any DIY service please check your insurance policy and Audi warranty policy for your region. In some regions DIY service may invalidate your warranty.
Table of Contents
- Air Conditioning Compressor Oil Capacity
- Air Conditioning Refrigerant Capacity
- Brake Fluid Capacity
- Cooling Fluid Capacity
- Engine Oil Capacity
- Fluid and Lubricant Specifications
- Hydraulic System Oil Capacity
- Manual Transmission Oil Capacity
- Steering Fluid Capacity
- Brake System Specifications
- Chassis Specifications
- Cooling System Specifications
- Drive Belts Specifications
- Electrical System Specifications
- Emission
- Engine Fastener Tightening Specifications
- Front Suspension Fastener Tightening Specifications
- Rear Suspension Fastener Tightening Specifications
- Transmission Fastener Tightening Specifications
Conquer your fears and never give up!
DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Audi A2 service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.
Doing basic service for your 2003 Audi A2 you're not only saving money, but also also improving your technical skills and learning something new.
2003 Audi A2 generations
In 2003 Audi offered 2 generations of the A2. Transmission fastener tightening specifications may vary in different generations. Be sure that you are looking at the rigt modification.