2013 Audi A1 Sportback First generation Engine Fastener Tightening Specifications
in your garage to make future searches easy.
Condition | Value |
---|
All Audi diesel straight-4 1.6 L CAYB engines | 5.9 lbf⋅ft |
All Audi diesel straight-4 1.6 L CAYC engines | 5.9 lbf⋅ft |
All Audi diesel straight-4 2.0 L CFHB engines | 5.9 lbf⋅ft |
All Audi diesel straight-4 2.0 L CFHD engines | 5.9 lbf⋅ft |
All Audi gasoline straight-4 1.4 L CPTA engines | 5.9 lbf⋅ft |
All other modifications | 14.75 lbf⋅ft |
Without air-conditioning system | 40.57 lbf⋅ft |
All other modifications | 29.5 lbf⋅ft |
Compressor belt | 16.96 lbf⋅ft |
First stage | 29.5 lbf⋅ft |
Use new screw. | |
Second stage | 90° |
Top | 16.96 lbf⋅ft |
First stage | 14.75 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 14.75 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
All other modifications | 16.96 lbf⋅ft |
First stage | Screw in new screw(s) hand-tight. |
Replace screws. | |
Second stage | Screw in screw(s) until the stop. |
Third stage | 90° detach. |
Fourth stage | 22.13 lbf⋅ft |
Fifth stage | 90° |
All other modifications | 18.44 lbf⋅ft |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 45° |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 45° |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
All other modifications | 16.96 lbf⋅ft |
All Audi diesel straight-4 2.0 L CFHD engines | 16.23 lbf⋅ft |
M6 | 7.38 lbf⋅ft |
M8 | 18.44 lbf⋅ft |
Alternator | 16.96 lbf⋅ft |
Alternator pulley | 59 lbf⋅ft |
On the engine block | 18.44 lbf⋅ft |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 45° |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 14.75 lbf⋅ft |
Second stage | 90° |
Vacuum pump | 6.64 lbf⋅ft |
All Audi diesel straight-4 2.0 L CFHB engines | 8.85 lbf⋅ft |
Clamps | 2.95 lbf⋅ft |
Nuts | 16.23 lbf⋅ft |
Replace sealing rings. | |
Screws | 6.64 lbf⋅ft |
Replace sealing rings. |
All Audi diesel straight-4 1.6 L CAYB engines | 16.23 lbf⋅ft |
All Audi diesel straight-4 1.6 L CAYC engines | 16.23 lbf⋅ft |
All Audi diesel straight-4 2.0 L CFHB engines | 16.23 lbf⋅ft |
All Audi diesel straight-4 2.0 L CFHD engines | 16.23 lbf⋅ft |
All Audi gasoline straight-4 1.4 L CPTA engines | 6.64 lbf⋅ft |
All other modifications | 14.75 lbf⋅ft |
All other modifications | 18.44 lbf⋅ft |
First stage | 14.75 lbf⋅ft |
Replace screws. | |
Second stage | 45° |
First stage | 14.75 lbf⋅ft |
Replace screws. | |
Second stage | 180° |
First stage | 14.75 lbf⋅ft |
Replace screws. | |
M8 × 28 screws | 45° |
M8 × 90 screws | 180° |
First stage | 14.75 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
All other modifications | 14.75 lbf⋅ft |
Central nuts | 70.07 lbf⋅ft |
Clamping screws | 14.75 lbf⋅ft |
Replace screws. |
Central nuts | 70.07 lbf⋅ft |
Clamping screws | 14.75 lbf⋅ft |
Replace screws. |
Central nuts | 70.07 lbf⋅ft |
Wheel | 14.75 lbf⋅ft |
Replace screws. |
Injection hoses | 18.44 lbf⋅ft |
First stage | 5.9 lbf⋅ft |
Replace screws. | |
Second stage | 180° |
High-pressure pump | 14.75 lbf⋅ft |
Tighten bolts uniformly in several passes. |
All Audi gasoline straight-4 1.4 L CAXA engines | 22.13 lbf⋅ft |
All Audi gasoline straight-4 1.2 L CBZA engines | 22.13 lbf⋅ft |
Replace components. | |
All Audi gasoline straight-4 1.4 L CNVA engines | 22.13 lbf⋅ft |
M6 × 25 screws | 5.9 lbf⋅ft |
M8 × 20 screws | 16.96 lbf⋅ft |
First stage | 29.5 lbf⋅ft |
Use new screw. | |
Second stage | 90° |
At the cylinder head | 18.44 lbf⋅ft |
Replace nuts. |
At the turbocharger | 14.75 lbf⋅ft |
On the engine block | 29.5 lbf⋅ft |
Screws | 6.64 lbf⋅ft |
Replace sealing rings. |
Screws | 16.96 lbf⋅ft |
At the turbocharger | 8.11 lbf⋅ft |
Replace sealing rings. |
All other modifications | 5.9 lbf⋅ft |
Replace sealing rings. |
At the turbocharger | 7.38 lbf⋅ft |
Replace sealing rings. |
All Audi gasoline straight-4 1.4 L CAVG engines | 22.13 lbf⋅ft |
Use new seal and screws. |
At the turbocharger | 5.9 lbf⋅ft |
Replace sealing rings. | |
On oil filter housing | 14.75 lbf⋅ft |
Replace sealing rings. |
Banjo screws | 22.13 lbf⋅ft |
Replace sealing rings. |
At the turbocharger | 6.64 lbf⋅ft |
Replace sealing rings. |
At the turbocharger | 16.23 lbf⋅ft |
On the engine block | 22.13 lbf⋅ft |
All Audi gasoline straight-4 1.4 L CTHG engines | 22.13 lbf⋅ft |
Use new seal and screws. | |
All Audi gasoline straight-4 1.4 L CTJA engines | 22.13 lbf⋅ft |
Use new seal and screws. | |
All other modifications | 6.64 lbf⋅ft |
Replace sealing rings. |
At the turbocharger | 12.54 lbf⋅ft |
All other modifications | 6.64 lbf⋅ft |
Replace sealing rings. |
All Audi diesel straight-4 1.6 L CAYB engines | 11.06 lbf⋅ft |
All Audi diesel straight-4 1.6 L CAYC engines | 11.06 lbf⋅ft |
All Audi diesel straight-4 2.0 L CFHB engines | 11.06 lbf⋅ft |
All Audi diesel straight-4 2.0 L CFHD engines | 11.06 lbf⋅ft |
All Audi gasoline straight-4 1.4 L CPTA engines | 8.85 lbf⋅ft |
All other modifications | 6.64 lbf⋅ft |
Coolant pump pulley | 14.75 lbf⋅ft |
All Audi diesel straight-4 2.0 L CFHB engines | 11.06 lbf⋅ft |
All other modifications | 5.16 lbf⋅ft |
Tighten the screws crosswise. |
First stage | 14.75 lbf⋅ft |
Use new screw. | |
Second stage | 90° |
All Audi diesel straight-4 2.0 L CFHB engines | 3.69 lbf⋅ft |
All other modifications | 1.11 lbf⋅ft |
Radiator mounting | 3.69 lbf⋅ft |
Cap | 7.38 lbf⋅ft |
First stage | Tighten by hand |
See figure 1. | |
Second stage | 7.38 lbf⋅ft |
All Audi gasoline straight-4 1.2 L CBZA engines | 5.9 lbf⋅ft |
Tighten the screws cross-wise from inside to outside. |
First stage | Tighten by hand |
See figure 1. | |
Second stage | 7.38 lbf⋅ft |
All Audi diesel straight-4 2.0 L CFHD engines | 7.38 lbf⋅ft |
Tighten gradually and alternately from inside to outside. |
First stage | 7.38 lbf⋅ft |
Replace screws. | |
Second stage | 180° |
First stage | Tighten by hand |
Replace screws. See figure 3. | |
Second stage | 14.75 lbf⋅ft |
Third stage | 90° |
Fourth stage | 90° |
First stage | Tighten by hand |
Replace screws. See figure 3. | |
Second stage | 22.13 lbf⋅ft |
Third stage | 90° |
Fourth stage | 90° |
First stage | 22.13 lbf⋅ft |
Replace screws. See figure 3. | |
Second stage | 36.88 lbf⋅ft |
Third stage | 90° |
Fourth stage | 90° |
First stage | 29.5 lbf⋅ft |
Replace screws. See figure 3. | |
Second stage | 90° |
Third stage | 90° |
First stage | 22.13 lbf⋅ft |
Replace screws. See figure 3. | |
Second stage | 36.88 lbf⋅ft |
Third stage | 90° |
Fourth stage | 90° |
First stage | 29.5 lbf⋅ft |
Replace screws. See figure 3. | |
Second stage | 90° |
Third stage | 90° |
Fourth stage | 90° |
First stage | 7.38 lbf⋅ft |
Tighten new screws crosswise in inside-to-outside order. | |
Second stage | 90° |
First stage | 7.38 lbf⋅ft |
Tighten new screws in inside-to-outside order. | |
Second stage | 90° |
First stage | 5.9 lbf⋅ft |
Tighten new screws crosswise in inside-to-outside order. | |
Second stage | 90° |
All other modifications | 6.64 lbf⋅ft |
Tighten the screws crosswise. |
First stage | 22.13 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 88.51 lbf⋅ft |
Use new screw. | |
Second stage | 90° |
First stage | 120° |
Replace screws. | |
Second stage | 90° |
First stage | 88.51 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 110.63 lbf⋅ft |
Use new screw. | |
Second stage | 180° |
Engine block closure screws | 22.13 lbf⋅ft |
Replace sealing rings. |
First stage | 44.25 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 36.88 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 47.94 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 47.94 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
All other modifications | Component must not be knocked down. |
First stage | 7.38 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 3.69 lbf⋅ft |
Replace screws. | |
Second stage | 30° |
First stage | 36.88 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
M8 | 14.75 lbf⋅ft |
Replace screws. |
First stage | 36.88 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
M8 | 14.75 lbf⋅ft |
All other modifications | 33.19 lbf⋅ft |
Camshaft timing chain slip rail | 13.28 lbf⋅ft |
All Audi gasoline straight-4 1.2 L CBZA engines | 44.25 lbf⋅ft |
All other modifications | 6.64 lbf⋅ft |
1.2 TFSI with gasoline straight-4 1.2 L 84 HP at 4800 RPM, 160 N⋅m at 1500 RPM engine (2012.1–) | 13.28 lbf⋅ft |
First stage | 36.88 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
Central screws | 73.76 lbf⋅ft |
Replace screws. |
First stage | 14.75 lbf⋅ft |
Replace screws. | |
Second stage | 45° |
Central screws | 73.76 lbf⋅ft |
Wheel | 18.44 lbf⋅ft |
All Audi gasoline straight-4 1.4 L CAXA engines | 6.64 lbf⋅ft |
All Audi gasoline straight-4 1.2 L CBZA engines | 44.25 lbf⋅ft |
Replace sealing rings. | |
All Audi gasoline straight-4 1.4 L CNVA engines | 6.64 lbf⋅ft |
All Audi gasoline straight-4 1.4 L CAVG engines | 6.64 lbf⋅ft |
All Audi gasoline straight-4 1.4 L CTHG engines | 6.64 lbf⋅ft |
All Audi gasoline straight-4 1.4 L CTJA engines | 6.64 lbf⋅ft |
All Audi gasoline straight-4 1.4 L CAVG engines | 13.28 lbf⋅ft |
All Audi gasoline straight-4 1.4 L CTHG engines | 13.28 lbf⋅ft |
All Audi gasoline straight-4 1.4 L CTJA engines | 13.28 lbf⋅ft |
All Audi gasoline straight-4 1.4 L CAVG engines | 13.28 lbf⋅ft |
All Audi gasoline straight-4 1.4 L CTHG engines | 13.28 lbf⋅ft |
All Audi gasoline straight-4 1.4 L CTJA engines | 13.28 lbf⋅ft |
First stage | 36.88 lbf⋅ft |
Use new screw. | |
Second stage | 135° |
Locking screws | 14.75 lbf⋅ft |
First stage | 29.5 lbf⋅ft |
Use new screw. (left-hand thread) | |
Second stage | 90° |
All other modifications | 5.9 lbf⋅ft |
First stage | 36.88 lbf⋅ft |
Use new screw. | |
Second stage | 90° |
First stage | 5.9 lbf⋅ft |
Replace screws. | |
Second stage | 45° |
First stage | 36.88 lbf⋅ft |
Use new screw. | |
Second stage | 135° |
First stage | 36.88 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
Tension rail bearing screws | 13.28 lbf⋅ft |
M10 | 36.88 lbf⋅ft |
M6 | 7.38 lbf⋅ft |
Toothed belt guard | 5.9 lbf⋅ft |
All other modifications | 5.9 lbf⋅ft |
All Audi diesel straight-4 2.0 L CFHB engines | 6.64 lbf⋅ft |
All Audi diesel straight-4 2.0 L CFHD engines | 6.64 lbf⋅ft |
All other modifications | 5.9 lbf⋅ft |
First stage | 14.75 lbf⋅ft |
Second stage | 45° |
First stage | 14.75 lbf⋅ft |
Use new parts. | |
Second stage | 45° |
All other modifications | 18.44 lbf⋅ft |
First stage | 3.69 lbf⋅ft |
Gradually tighten screws crosswise. | |
Second stage | 5.9 lbf⋅ft |
All Audi gasoline straight-4 1.4 L CAVG engines | 5.16 lbf⋅ft |
All Audi gasoline straight-4 1.4 L CAXA engines | 5.9 lbf⋅ft |
All Audi diesel straight-4 1.6 L CAYB engines | 8.11 lbf⋅ft |
All Audi diesel straight-4 1.6 L CAYC engines | 8.11 lbf⋅ft |
All Audi diesel straight-4 2.0 L CFHB engines | 8.11 lbf⋅ft |
All Audi diesel straight-4 2.0 L CFHD engines | 8.11 lbf⋅ft |
All Audi gasoline straight-4 1.4 L CNVA engines | 5.9 lbf⋅ft |
All Audi gasoline straight-4 1.4 L CTHG engines | 5.16 lbf⋅ft |
All Audi gasoline straight-4 1.4 L CTJA engines | 5.16 lbf⋅ft |
First stage | 5.9 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
Oil drain plug | 22.13 lbf⋅ft |
Replace sealing rings. |
Oil filter cover | 18.44 lbf⋅ft |
Replace the O ring. |
All other modifications | 14.75 lbf⋅ft |
Lubricate the seal with engine oil. |
On the engine block | 18.44 lbf⋅ft |
First stage | 10.33 lbf⋅ft |
Use new screws and tighten them crosswise. | |
Second stage | 90° |
Oil filter cover | 18.44 lbf⋅ft |
First stage | 10.33 lbf⋅ft |
Use new screws and tighten them crosswise. | |
Second stage | 90° |
Oil filter cover | 18.44 lbf⋅ft |
First stage | 10.33 lbf⋅ft |
Tighten alternately starting from the top left | |
Second stage | 180° |
Oil pressure sensor | 14.75 lbf⋅ft |
All Audi diesel straight-4 1.6 L CAYB engines | 11.8 lbf⋅ft |
All Audi diesel straight-4 1.6 L CAYC engines | 11.8 lbf⋅ft |
All Audi diesel straight-4 2.0 L CFHB engines | 6.64 lbf⋅ft |
All Audi diesel straight-4 2.0 L CFHD engines | 6.64 lbf⋅ft |
All Audi gasoline straight-4 1.4 L CPTA engines | 7.38 lbf⋅ft |
First stage | 10.33 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 14.75 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 3.69 lbf⋅ft |
Tighten the screws crosswise. |
Second stage | 29.5 lbf⋅ft |
Third stage | 9.59 lbf⋅ft |
Tighten the screws crosswise. |
At the gearbox | 29.5 lbf⋅ft |
First stage | 7.38 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
At the gearbox | 29.5 lbf⋅ft |
First stage | 3.69 lbf⋅ft |
Tighten cross-wise. | |
Second stage | 9.59 lbf⋅ft |
At the gearbox | 29.5 lbf⋅ft |
On the engine block | 9.59 lbf⋅ft |
Replace bolts. |
First stage | 3.69 lbf⋅ft |
Gradually tighten screws crosswise. | |
Third stage | 11.06 lbf⋅ft |
Second stage | 29.5 lbf⋅ft |
First stage | 3.69 lbf⋅ft |
Gradually tighten screws crosswise. | |
Third stage | 11.06 lbf⋅ft |
Second stage | 29.5 lbf⋅ft |
Oil sump lower part | 8.85 lbf⋅ft |
Replace screws. See figure 4. | |
First stage | 5.9 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
All other modifications | 7.38 lbf⋅ft |
All Audi gasoline straight-4 1.2 L CBZA engines | 3.69 lbf⋅ft |
All other modifications | 3.32 lbf⋅ft |
On exhaust manifold | 33.19 lbf⋅ft |
Use hot screw paste | |
Otherwise | 44.25 lbf⋅ft |
Use hot screw paste |
On exhaust manifold | 33.19 lbf⋅ft |
Use hot screw paste | |
Otherwise | 44.25 lbf⋅ft |
Use hot screw paste |
All other modifications | 33.19 lbf⋅ft |
Use hot screw paste |
All other modifications | 12.54 lbf⋅ft |
Knock sensor | 14.75 lbf⋅ft |
Replace screws. |
All other modifications | 40.57 lbf⋅ft |
Use hot screw paste |
First stage | 5.16 lbf⋅ft |
Replace screws. | |
Second stage | 29.5 lbf⋅ft |
Third stage | 180° |
All Audi gasoline straight-4 1.2 L CBZA engines | 36.88 lbf⋅ft |
First stage | 5.16 lbf⋅ft |
Replace screws. | |
Second stage | 29.5 lbf⋅ft |
Third stage | 180° |
First stage | 5.16 lbf⋅ft |
Replace screws. | |
Second stage | 29.5 lbf⋅ft |
Third stage | 180° |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 14.75 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 22.13 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 14.75 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 22.13 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 14.75 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 22.13 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 29.5 lbf⋅ft |
Replace nuts. | |
Second stage | 90° |
First stage | 14.75 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 22.13 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 51.63 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 14.75 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 22.13 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | 29.5 lbf⋅ft |
Replace screws. | |
Second stage | 90° |
First stage | Screw in by hand |
Second stage | 16.96 lbf⋅ft |
Clamps | 11.06 lbf⋅ft |
Nuts | 14.75 lbf⋅ft |
Screws | 14.75 lbf⋅ft |
All other modifications | 16.96 lbf⋅ft |
Replace sealing rings. |
First stage | Screw in screw manually up to stop. |
Use new parts. | |
Second stage | 5.9 lbf⋅ft |
Differential pressure sensor lines | 33.19 lbf⋅ft |
Use hot screw paste |
First stage | Screw in manually up to stop. |
Tighten new nuts and screws crosswise from the inside to the outside. | |
Second stage | 11.8 lbf⋅ft |
First stage | Screw in manually up to stop. |
Tighten new nuts and screws crosswise from the inside to the outside. | |
Second stage | 13.28 lbf⋅ft |
Third stage | 8.85 lbf⋅ft |
Fourth stage | 8.85 lbf⋅ft |
All other modifications | 18.44 lbf⋅ft |
Replace nuts. Use hot screw paste. Tighten new nuts evenly in several steps. |
All Audi diesel straight-4 1.6 L CAYB engines | 17.7 lbf⋅ft |
All Audi diesel straight-4 1.6 L CAYC engines | 17.7 lbf⋅ft |
All Audi diesel straight-4 2.0 L CFHB engines | 17.7 lbf⋅ft |
All Audi diesel straight-4 2.0 L CFHD engines | 17.7 lbf⋅ft |
All other modifications | 7.38 lbf⋅ft |
Clamps | 25.81 lbf⋅ft |
All other modifications | 22.13 lbf⋅ft |
All Audi diesel straight-4 2.0 L CFHB engines | 18.44 lbf⋅ft |
All other modifications | 14.75 lbf⋅ft |
Clamps | 25.81 lbf⋅ft |
All other modifications | 22.13 lbf⋅ft |
All other modifications | 16.96 lbf⋅ft |
Fuel filter bracket | 3.69 lbf⋅ft |
High-pressure side | 13.28 lbf⋅ft |
All Audi gasoline straight-4 1.2 L CBZA engines | 18.44 lbf⋅ft |
All other modifications | 22.13 lbf⋅ft |
Screws | 29.5 lbf⋅ft |
At the bracket | 16.96 lbf⋅ft |
Screws | 29.5 lbf⋅ft |
At the bracket | 16.96 lbf⋅ft |
Screws | 59 lbf⋅ft |
Screws | 29.5 lbf⋅ft |
Screws | 59 lbf⋅ft |
At the bracket | 16.96 lbf⋅ft |
Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2013 Audi A1 Sportback user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.
Before doing any DIY service please check your insurance policy and Audi warranty policy for your region. In some regions DIY service may invalidate your warranty.
Table of Contents
- Air Conditioning Compressor Oil Capacity
- Air Conditioning Refrigerant Capacity
- Brake Fluid Capacity
- Cooling Fluid Capacity
- Engine Oil Capacity
- Fluid and Lubricant Specifications
- Manual Transmission Oil Capacity
- Steering Fluid Capacity
- Brake System Specifications
- Chassis Specifications
- Cooling System Specifications
- Electrical System Specifications
- Emission
Conquer your fears and never give up!
DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Audi A1 Sportback service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.
Doing basic service for your 2013 Audi A1 Sportback you're not only saving money, but also also improving your technical skills and learning something new.
Audi A1 Sportback First generation model years
logo_audi 2011logo_audi 2012-
logo_audi 2013 logo_audi 2014