1978 Audi 50 Type 86 Fastener Tightening Specifications

in your garage to make future searches easy.

Condition Value
expand_moreEngine tightening torques
expand_moreAir intake system
Intake manifold 18.44 lbf⋅ft
expand_moreCylinder head
expand_moreCamshaft bearing
First stage 4.43 lbf⋅ft
Second stage 90°
Valve cover 7.38 lbf⋅ft
expand_moreEngine block
expand_moreConnecting rod bearing
First stage 22.13 lbf⋅ft
Second stage 90°
expand_moreCrankshaft central screws
expand_moreAll Audi gasoline straight-4 1.1 L HB engines
First stage 66.38 lbf⋅ft
Second stage 120°
expand_moreAll Audi gasoline straight-4 1.3 L HJ engines
M12 59 lbf⋅ft
expand_moreM14
First stage 66.38 lbf⋅ft
Second stage 120°
expand_moreFlywheel
Second stage 90°
expand_moreAll Audi gasoline straight-4 1.1 L HB engines
First stage 44.25 lbf⋅ft
expand_moreAll Audi gasoline straight-4 1.3 L HJ engines
First stage 44.25 lbf⋅ft
Use screw-locking compound.
Main bearing 47.94 lbf⋅ft
expand_moreEngine control
Camshaft timing gear 59 lbf⋅ft
expand_moreEngine lubrication
Oil drain plug 22.13 lbf⋅ft
Oil filter housing 18.44 lbf⋅ft
Oil sump 11.06 lbf⋅ft
expand_moreEngine management
expand_moreLambda sensor
1.1 with gasoline straight-4 1.1 L 50 HP engine (1974.8–1978.7) 36.88 lbf⋅ft
expand_moreExhaust system
Exhaust manifold 18.44 lbf⋅ft
expand_moreIgnition system
Spark plugs 18.44 lbf⋅ft
expand_morePower transmission tightening torques
expand_moreClutch
Clutch pressure plate 14.75 lbf⋅ft
expand_moreSuspension front tightening torques
expand_moreWheels and tires
Wheel attachment 66.38 lbf⋅ft
expand_moreSuspension rear tightening torques
expand_moreWheels and tires
Wheel attachment 66.38 lbf⋅ft

When assembling your 1978 Audi 50 it's important to tight threaded fasteners with Audi prescribed torques using a torque wrench. If the torque values is lower then prescribed, bolt may unscrew itself and assembly may fall apart. If the torque value is higher then prescribed, bolt may simply break. The torque wrench allows you to tighten all bolts of the assembly with the same torque applied.

Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 1978 Audi 50 user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.

Before doing any DIY service please check your insurance policy and Audi warranty policy for your region. In some regions DIY service may invalidate your warranty.

Table of Contents

    • Fastener Tightening Specifications

      Conquer your fears and never give up!

      DIY car service is not as difficult as it looks like and it might save you thousands of dollars per year. It might be even fun and a good thing to do with your kids on a weekend to teach them how basic machinery works. It's really hard to screw something up and damage your car permanently if you use right tools, follow Audi 50 service manual and use right parts and fluids in prescribed amounts. Even modern cars stuffed with electronics can be serviced in your garage or even in your driveway. Changing engine oil, brake fluid, ATF, replacing brake pads, and etc. It's all may be done by yourself in a mater of a couple of hours.

      Doing basic service for your 1978 Audi 50 you're not only saving money, but also also improving your technical skills and learning something new.

      Audi 50 Type 86 model years

      Units:
      facebook twitter reddit linkedin messenger whatsapp telegram skype email chat