car
Add this car
in your garage to make future searches easy.
expand_more Engine tightening torques
expand_more Auxiliary assemblies
expand_more Auxiliary drive belt deflection pulley
expand_more Auxiliary drive belt tensioner
expand_more Engine block
expand_more Crankshaft central screws
expand_more 2.2 JTS with gasoline straight-4 2.2 L 182 HP, 230 N⋅m at 6500 RPM engine (2006.3–2010.6)
First stage
66.38 – 81.13 lbf⋅ft 66.38 – 81.13 lbf⋅ft 90 – 110 N⋅m
Second stage
75 ° 75 ° 75 °
expand_more 3.2 JTS Q4 with gasoline V6 3.2 L 256 HP, 322 N⋅m engine (2006.3–2010.6)
First stage
73.76 lbf⋅ft 73.76 lbf⋅ft 100 N⋅m
Second stage
150 ° 150 ° 150 °
expand_more 3.2 JTS with gasoline V6 3.2 L 256 HP, 322 N⋅m engine (2008.3–2010.6)
First stage
73.76 lbf⋅ft 73.76 lbf⋅ft 100 N⋅m
Second stage
150 ° 150 ° 150 °
expand_more Crankshaft pulley
expand_more Flywheel
First stage
35.4 – 42.78 lbf⋅ft 35.4 – 42.78 lbf⋅ft 48 – 58 N⋅m
Replace screws.
Second stage
25 ° 25 ° 25 °
expand_more Engine control
expand_more Balance shaft timing chain guide rail
2.2 JTS with gasoline straight-4 2.2 L 182 HP, 230 N⋅m at 6500 RPM engine (2006.3–2010.6)
7.38 lbf⋅ft 7.38 lbf⋅ft 10 N⋅m
3.2 JTS Q4 with gasoline V6 3.2 L 256 HP, 322 N⋅m engine (2006.3–2010.6)
42.78 lbf⋅ft 42.78 lbf⋅ft 58 N⋅m
3.2 JTS with gasoline V6 3.2 L 256 HP, 322 N⋅m engine (2008.3–2010.6)
42.78 lbf⋅ft 42.78 lbf⋅ft 58 N⋅m
expand_more Balance shaft timing chain tension rail
2.2 JTS with gasoline straight-4 2.2 L 182 HP, 230 N⋅m at 6500 RPM engine (2006.3–2010.6)
7.38 lbf⋅ft 7.38 lbf⋅ft 10 N⋅m
expand_more Camshaft timing chain guide rail
2.2 JTS with gasoline straight-4 2.2 L 182 HP, 230 N⋅m at 6500 RPM engine (2006.3–2010.6)
7.38 lbf⋅ft 7.38 lbf⋅ft 10 N⋅m
3.2 JTS Q4 with gasoline V6 3.2 L 256 HP, 322 N⋅m engine (2006.3–2010.6)
16.96 lbf⋅ft 16.96 lbf⋅ft 23 N⋅m
3.2 JTS with gasoline V6 3.2 L 256 HP, 322 N⋅m engine (2008.3–2010.6)
16.96 lbf⋅ft 16.96 lbf⋅ft 23 N⋅m
expand_more Camshaft timing chain tensioning rail
2.2 JTS with gasoline straight-4 2.2 L 182 HP, 230 N⋅m at 6500 RPM engine (2006.3–2010.6)
7.38 lbf⋅ft 7.38 lbf⋅ft 10 N⋅m
3.2 JTS Q4 with gasoline V6 3.2 L 256 HP, 322 N⋅m engine (2006.3–2010.6)
16.96 lbf⋅ft 16.96 lbf⋅ft 23 N⋅m
3.2 JTS with gasoline V6 3.2 L 256 HP, 322 N⋅m engine (2008.3–2010.6)
16.96 lbf⋅ft 16.96 lbf⋅ft 23 N⋅m
expand_more Camshaft timing gear
expand_more M12
First stage
20.65 – 22.86 lbf⋅ft 20.65 – 22.86 lbf⋅ft 28 – 31 N⋅m
Replace screws.
Second stage
40 ° 40 ° 40 °
expand_more Control drive chain tensioner
2.2 JTS with gasoline straight-4 2.2 L 182 HP, 230 N⋅m at 6500 RPM engine (2006.3–2010.6)
55.32 lbf⋅ft 55.32 lbf⋅ft 75 N⋅m
3.2 JTS Q4 with gasoline V6 3.2 L 256 HP, 322 N⋅m engine (2006.3–2010.6)
16.96 lbf⋅ft 16.96 lbf⋅ft 23 N⋅m
3.2 JTS with gasoline V6 3.2 L 256 HP, 322 N⋅m engine (2008.3–2010.6)
16.96 lbf⋅ft 16.96 lbf⋅ft 23 N⋅m
expand_more Drive chain balance shaft tensioner
2.2 JTS with gasoline straight-4 2.2 L 182 HP, 230 N⋅m at 6500 RPM engine (2006.3–2010.6)
5.16 – 6.64 lbf⋅ft 5.16 – 6.64 lbf⋅ft 7 – 9 N⋅m
3.2 JTS Q4 with gasoline V6 3.2 L 256 HP, 322 N⋅m engine (2006.3–2010.6)
16.96 lbf⋅ft 16.96 lbf⋅ft 23 N⋅m
3.2 JTS with gasoline V6 3.2 L 256 HP, 322 N⋅m engine (2008.3–2010.6)
16.96 lbf⋅ft 16.96 lbf⋅ft 23 N⋅m
expand_more Inlet camshaft wheel
expand_more Outlet camshaft wheel
First stage
22.13 lbf⋅ft 22.13 lbf⋅ft 30 N⋅m
Second stage
40 ° 40 ° 40 °
First stage
22.13 lbf⋅ft 22.13 lbf⋅ft 30 N⋅m
Second stage
40 ° 40 ° 40 °
expand_more Timing case cover
2.2 JTS with gasoline straight-4 2.2 L 182 HP, 230 N⋅m at 6500 RPM engine (2006.3–2010.6)
15.49 lbf⋅ft 15.49 lbf⋅ft 21 N⋅m
3.2 JTS Q4 with gasoline V6 3.2 L 256 HP, 322 N⋅m engine (2006.3–2010.6)
16.96 lbf⋅ft 16.96 lbf⋅ft 23 N⋅m
3.2 JTS with gasoline V6 3.2 L 256 HP, 322 N⋅m engine (2008.3–2010.6)
16.96 lbf⋅ft 16.96 lbf⋅ft 23 N⋅m
expand_more Toothed belt tensioning roller
M8
16.96 – 20.65 lbf⋅ft 16.96 – 20.65 lbf⋅ft 23 – 28 N⋅m
Toothed belt tightener
16.96 – 20.65 lbf⋅ft 16.96 – 20.65 lbf⋅ft 23 – 28 N⋅m
expand_more Engine mounting
expand_more Engine bracket
expand_more All other modifications
M10
33.19 – 40.57 lbf⋅ft 33.19 – 40.57 lbf⋅ft 45 – 55 N⋅m
expand_more Engine mounting
M10
39.83 – 48.68 lbf⋅ft 39.83 – 48.68 lbf⋅ft 54 – 66 N⋅m
expand_more M12
First stage
46.47 – 56.79 lbf⋅ft 46.47 – 56.79 lbf⋅ft 63 – 77 N⋅m
Replace screws.
Second stage
90 ° 90 ° 90 °
M10
39.83 – 48.68 lbf⋅ft 39.83 – 48.68 lbf⋅ft 54 – 66 N⋅m
expand_more M12
First stage
46.47 – 56.79 lbf⋅ft 46.47 – 56.79 lbf⋅ft 63 – 77 N⋅m
Replace screws.
Second stage
90 ° 90 ° 90 °
expand_more All other modifications
M10
39.83 – 48.68 lbf⋅ft 39.83 – 48.68 lbf⋅ft 54 – 66 N⋅m
Replace screws.
expand_more M12
Nuts
50.15 – 61.22 lbf⋅ft 50.15 – 61.22 lbf⋅ft 68 – 83 N⋅m
Replace nuts.
expand_more Screws
First stage
46.47 – 56.79 lbf⋅ft 46.47 – 56.79 lbf⋅ft 63 – 77 N⋅m
Replace screws.
Second stage
90 ° 90 ° 90 °
expand_more Power transmission tightening torques
expand_more Gearbox lubrication
expand_more Gearbox oil drain plug
expand_more 2.4 JTDM with diesel straight-5 2.4 L 197 HP at 4000 RPM, 400 N⋅m at 2000 RPM engine (2007.4–2010.6)
expand_more With automatic gearbox
AT6 gearbox
40.57 lbf⋅ft 40.57 lbf⋅ft 55 N⋅m
expand_more With manual transmission
F40 gearbox
12.54 lbf⋅ft 12.54 lbf⋅ft 17 N⋅m
Use sealant.
expand_more 2.4 JTDM with diesel straight-5 2.4 L 207 HP engine (2008.3–2010.6)
expand_more With automatic gearbox
AT6 gearbox
40.57 lbf⋅ft 40.57 lbf⋅ft 55 N⋅m
expand_more With manual transmission
F40 gearbox
12.54 lbf⋅ft 12.54 lbf⋅ft 17 N⋅m
Use sealant.
expand_more 3.2 JTS Q4 with gasoline V6 3.2 L 256 HP, 322 N⋅m engine (2006.3–2010.6)
expand_more With automatic gearbox
AT6 gearbox
40.57 lbf⋅ft 40.57 lbf⋅ft 55 N⋅m
expand_more With manual transmission
F40 gearbox
12.54 lbf⋅ft 12.54 lbf⋅ft 17 N⋅m
Use sealant.
expand_more All other modifications
F40 gearbox
12.54 lbf⋅ft 12.54 lbf⋅ft 17 N⋅m
Use sealant.
expand_more Gearbox oil filler plug
expand_more 2.4 JTDM with diesel straight-5 2.4 L 197 HP at 4000 RPM, 400 N⋅m at 2000 RPM engine (2007.4–2010.6)
expand_more With automatic gearbox
AT6 gearbox
17.7 – 26.55 lbf⋅ft 17.7 – 26.55 lbf⋅ft 24 – 36 N⋅m
expand_more With manual transmission
F40 gearbox
17.7 – 26.55 lbf⋅ft 17.7 – 26.55 lbf⋅ft 24 – 36 N⋅m
expand_more 2.4 JTDM with diesel straight-5 2.4 L 207 HP engine (2008.3–2010.6)
expand_more With automatic gearbox
AT6 gearbox
17.7 – 26.55 lbf⋅ft 17.7 – 26.55 lbf⋅ft 24 – 36 N⋅m
expand_more With manual transmission
F40 gearbox
17.7 – 26.55 lbf⋅ft 17.7 – 26.55 lbf⋅ft 24 – 36 N⋅m
expand_more 3.2 JTS Q4 with gasoline V6 3.2 L 256 HP, 322 N⋅m engine (2006.3–2010.6)
expand_more With automatic gearbox
AT6 gearbox
17.7 – 26.55 lbf⋅ft 17.7 – 26.55 lbf⋅ft 24 – 36 N⋅m
expand_more With manual transmission
F40 gearbox
17.7 – 26.55 lbf⋅ft 17.7 – 26.55 lbf⋅ft 24 – 36 N⋅m
expand_more All other modifications
F40 gearbox
17.7 – 26.55 lbf⋅ft 17.7 – 26.55 lbf⋅ft 24 – 36 N⋅m
expand_more Oil control plug
expand_more With automatic gearbox
AT6 gearbox
4.43 – 5.9 lbf⋅ft 4.43 – 5.9 lbf⋅ft 6 – 8 N⋅m
expand_more Suspension front tightening torques
expand_more Front axle brake
Bleed valve
8.11 – 12.54 lbf⋅ft 8.11 – 12.54 lbf⋅ft 11 – 17 N⋅m
Front axle brake caliper
22.86 – 28.03 lbf⋅ft 22.86 – 28.03 lbf⋅ft 31 – 38 N⋅m
Front axle brake caliper mounting support
140.14 – 199.14 lbf⋅ft 140.14 – 199.14 lbf⋅ft 190 – 270 N⋅m
Front axle brake disc
4.43 – 5.9 lbf⋅ft 4.43 – 5.9 lbf⋅ft 6 – 8 N⋅m
Wheel speed sensor
5.16 – 8.11 lbf⋅ft 5.16 – 8.11 lbf⋅ft 7 – 11 N⋅m
expand_more Front axle steering
Track rod end on stub axle
66.38 – 81.13 lbf⋅ft 66.38 – 81.13 lbf⋅ft 90 – 110 N⋅m
expand_more Wheel suspension
expand_more Wheel hub wheel bearing
expand_more Central nuts
First stage
99.57 – 121.7 lbf⋅ft 99.57 – 121.7 lbf⋅ft 135 – 165 N⋅m
Replace and caulk the nut.
Second stage
90° detach
Third stage
49.42 – 54.58 lbf⋅ft 49.42 – 54.58 lbf⋅ft 67 – 74 N⋅m
Fourth stage
45 ° 45 ° 45 °
Fifth stage
147.51 – 280.27 lbf⋅ft 147.51 – 280.27 lbf⋅ft 200 – 380 N⋅m
expand_more On stub axle
Wheel bearing unit
67.86 – 82.61 lbf⋅ft 67.86 – 82.61 lbf⋅ft 92 – 112 N⋅m
expand_more Wheels and tires
Wheel attachment
79.66 – 97.36 lbf⋅ft 79.66 – 97.36 lbf⋅ft 108 – 132 N⋅m
expand_more Suspension rear tightening torques
expand_more Rear axle brake
Rear axle bleeder valve
5.9 – 8.85 lbf⋅ft 5.9 – 8.85 lbf⋅ft 8 – 12 N⋅m
Rear axle brake caliper
22.86 – 28.03 lbf⋅ft 22.86 – 28.03 lbf⋅ft 31 – 38 N⋅m
Rear axle brake caliper mounting support
39.83 – 44.25 lbf⋅ft 39.83 – 44.25 lbf⋅ft 54 – 60 N⋅m
Rear axle brake disc
4.43 – 5.9 lbf⋅ft 4.43 – 5.9 lbf⋅ft 6 – 8 N⋅m
Rear axle wheel speed sensor
5.16 – 8.11 lbf⋅ft 5.16 – 8.11 lbf⋅ft 7 – 11 N⋅m
expand_more Wheels and tires
Wheel attachment
79.66 – 97.36 lbf⋅ft 79.66 – 97.36 lbf⋅ft 108 – 132 N⋅m
When assembling your 2008 Alfa Romeo Spider it's important to tight threaded fasteners with Alfa Romeo prescribed torques using a torque wrench. If the torque values is lower then prescribed, bolt may unscrew itself and assembly may fall apart. If the torque value is higher then prescribed, bolt may simply break. The torque wrench allows you to tighten all bolts of the assembly with the same torque applied.
Please be noted that all capacities listed here are approximate. Check fluid levels when adding or refilling as recommended in your 2008 Alfa Romeo Spider user's manual. Keep in mind that all information here is provided “as is” without any warranty of any kind.
Before doing any DIY service please check your insurance policy and Alfa Romeo warranty policy for your region. In some regions DIY service may invalidate your warranty.